Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3

Journal of Cleaner Production

Volumn 19, Issue 6-7, 2011, Pages 640-645

  Fratila, Domnita ^a   Caizar, Cristian ^a  

^a TECHNICAL UNIVERSITY OF CLUJ NAPOCA   (Romania)

Author keywords

Analysis of Variance; Face milling process; Minimal quantity lubrication; Taguchi method

Indexed keywords

CUTTING CONDITIONS; CUTTING PARAMETERS; CUTTING SPEED; DEPTH OF CUT; DRY MILLING; ENVIRONMENT FRIENDLY; FACE MILLING; FACE MILLING PROCESS; FEED-RATES; FULL FACTORIAL DESIGN; HIGH-SPEED STEELS; INTERACTION EFFECT; MINIMAL QUANTITY LUBRICATION; MULTIRESPONSE; OPTIMAL PROCESS; OPTIMIZATION METHODOLOGY; ORTHOGONAL ARRAY; PERFORMANCE CHARACTERISTICS; POWER CONSUMPTION; S/N RATIO; SIGNAL TO NOISE; SURFACE FINISHES; SUSTAINABLE PRODUCTION; TAGUCHI; WEIGHTING FACTORS;

CUTTING FLUIDS; DESIGN OF EXPERIMENTS; ELECTRIC POWER SUPPLIES TO APPARATUS; FLOW OF FLUIDS; LUBRICATION; MILLING (MACHINING); OPTIMIZATION; REGRESSION ANALYSIS; SURFACE PROPERTIES; SURFACE ROUGHNESS; TAGUCHI METHODS;

ANALYSIS OF VARIANCE (ANOVA);

EID: 79951577218     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2010.12.007     Document Type: Article

References (29)

1. A. Attanasio, M. Gelfi, C. Giardini, and C. Remino Minimal quantity lubrication in turning: effect on tool wear Wear 260 3 2006 333 338 (Pubitemid 43208700)
2. J.S. Baldwin, P.M. Allen, B. Winder, and K. Keith Ridgway Modelling manufacturing evolution: thoughts on sustainable industrial development Journal of Cleaner Production 13 9 2005 887 902 (Pubitemid 40114355)
3. B. Bras, J.A. Isaacs, and M. Overcash Environmentally benign manufacturing - a workshop report Journal of Cleaner Production 14 5 2006 527 535 (Pubitemid 43107598)
4. A.C. Brent, and J.K. Visser An environmental performance resource impact indicator for life cycle management in the manufacturing industry Journal of Cleaner Production 13 6 2005 557 565
5. A.F. Clarens, J.B. Zimmerman, G.A. Keoleian, K.F. Hayes, and S.J. Skerlos Comparison of life cycle emissions and energy consumption for environmentally adapted metalworking fluid systems Environmental Science & Technology 42 2008 8534 8540
6. S.M. Darwish The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel super alloy Journal of Materials Processing Technologies 97 2000 10 18 (Pubitemid 30530080)
7. J. Del Alamo, J.C. Fernandez, M. Hernandez, Y. Nunez, R. Irusta, and J.L. Del Valle Environmental optimisation of a hydro-moulding process Journal of Cleaner Production 12 2004 153 157
8. J.A. Ghani, I.A. Choudhury, and H.H. Hassan Application of Taguchi method in the optimization of end milling parameters Journal of Materials Processing Technology 145 2004 84 92
9. F. Itoigawa, T.H.C. Childs, T. Nakamura, and W. Belluco Effects and mechanisms in minimal quantity lubrication machining of aluminum alloy Wear 260 3 2006 339 344 (Pubitemid 43208701)
10. I.S. Jawahir, and O.W. Dillon Jr. Sustainable Manufacturing Processes: New Challenges for Developing Predictive Models and Optimization Techniques 2007 Proceedings of the first international conference on sustainable manufacturing SM1. Montreal, Canada, pp. 1-15
11. J.F. Kelly, and M.G. Cotterell Minimal lubrication machining of aluminum alloys Journal of Materials Processing Technology 120 1-3 2002 327 334 (Pubitemid 34069993)
12. J. Kopac, M. Bahor, and M. Sokovic Optimal machining parameters for achieving the desired surface roughness in fine turning of cold preformed steel workpieces International Journal of Machining Tool Manufacturing 42 2002 707 796
13. J.S. Kwak Application of Taguchi and response surface methodologies for geometric error in surface grinding process International Journal of Machine Tools & Manufacture 45 2005 327 334
14. M. Lindahl Engineering designers' experience of design for environment methods and tools - requirement definitions from an interview study Journal of Cleaner Production 14 5 2006 487 496 (Pubitemid 43107594)
15. M.A. Ljis, H.C.D. Mohd Radzi, and A.K.M. Nurul Amin The implementation of Taguchi method on EDM process of tungsten carbide European Journal of Scientific Research 26 4 2009 609 617
16. V. Lofthouse Ecodesign tools for designers: defining the requirements Journal of Cleaner Production 14 15-16 2006 1386 1395 (Pubitemid 43983103)
17. P.W. Marksberry Micro-flood (MF) technology for sustainable manufacturing operations that are coolant less and occupationally friendly Journal of Cleaner Production 15 10 2007 958 971 (Pubitemid 44959941)
18. S. Min, I. Inasaki, S. Fujimura, T. Wada, S. Suda, and T. Wakabayashi A Study on tribology in minimal quantity lubrication cutting CIRP Annals Manufacturing Technology 54 1 2005 105 108 (Pubitemid 40948420)
19. S.P. Mo, D.A. Axinte, T.H. Hyde, and N.N.Z. Gindy An example of selection of the cutting conditions in broaching of heat-resistant alloys based on cutting forces, surface roughness and tool wear Journal of Materials Processing Technology 160 2005 382 389 (Pubitemid 40266086)
20. S.H. Park Robust Design and Analysis for Quality Engineering 1996 Chapman & Hall London
21. M.S. Phadke Quality Engineering Using Design of Experiments, Quality Control, Robust Design and the Taguchi Method 1988 Wadsworth & Books California
22. M.S. Phadke Quality Engineering Using Robust Design 1989 Prentice-Hall Englewood Cliffs, NJ
23. F. Pusavec, P. Krajnik, and J. Kopac Transition to sustainable production - part I: application on machining technologies Journal of Cleaner Production 18 2 2010 174 184
24. F. Pusavec, D. Kramar, P. Krajnik, and J. Janez Kopac Transitioning to sustainable production - part II: evaluation of sustainable machining technologies Journal of Cleaner Production 18 12 2010 1211 1221
25. J.A. Sanchez, I. Pombo, R. Alberdi, B. Izquierdo, N. Ortega, S. Plaza, and J. Martinez-Toledan Machining evaluation of a hybrid MQL-CO2 grinding technology Journal of Cleaner Production 18 8 2010 1840 1849
26. R. Unal, and E.B. Dean Taguchi Approach to Design Optimization for Quality and Cost: An Overview 1991 Proceedings of the International Society of Parametric Analyst 13th Annual, May 21-24
27. K. Weinert, I. Inasaki, J.W. Sutherland, and T. Wakabayashi Dry machining and minimum quantity lubrication CIRP Annals Manufacturing Technology 53 2 2004 511 537 (Pubitemid 40118859)
28. W.H. Yang, and Y.S. Tarng Design optimization of cutting parameters for turning operations based on the Taguchi method Journal of Materials Processing Technologies 84 1998 122 129 (Pubitemid 128638952)
29. M. Zackrisson Environmental aspects when manufacturing products mainly out of metals and/or polymers Journal of Cleaner Production 13 1 2005 43 49