Influence of minimum quantity lubrication parameters on tool wear and surface roughness in milling of forged steel

Chinese Journal of Mechanical Engineering (English Edition)

Volumn 25, Issue 3, 2012, Pages 419-429

  Yan, Lutao ^a   Yuan, Songmei ^a   Liu, Qiang ^a  

^a BEIHANG UNIVERSITY   (China)

Author keywords

Milling; Minimum quantity lubrication (MQL); Parameter; Surface roughness; Tool wear

Indexed keywords

AIR PRESSURES; CHIP MORPHOLOGIES; CUTTING TEMPERATURE; CUTTING ZONE; DIFFERENT MODES; DRY CUTTING; ECONOMICAL BENEFITS; ELEVATION ANGLE; END MILLING; FEED DIRECTION; FLANK WEAR; FORGED STEEL; LUBRICANT FLOW; MINIMUM QUANTITY LUBRICATION; MINIMUM QUANTITY OF LUBRICATIONS; NOZZLE TIP; OIL FLOW RATE; OIL MISTS; OPTIMAL CONDITIONS; PARAMETER; SURFACE FINISHES; TOOL LIFE; TOOL WEAR;

ATMOSPHERIC PRESSURE; COMPRESSED AIR; CUTTING FLUIDS; FLOW RATE; MILLING (MACHINING); NOZZLES; SURFACE ROUGHNESS; WEAR OF MATERIALS;

LUBRICATION;

EID: 84861686560     PISSN: 10009345     EISSN: None     Source Type: Journal    
DOI: 10.3901/CJME.2012.03.419     Document Type: Article

References (32)

1. YILDIZ Y, NALBANT M. A review of cryogenic cooling in machining processes [J]. International Journal of Machine Tools & Manufacture, 2008, 48(9): 947-964.
2. ADLER D P, HII W S, MICHALEK D J, et al. Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns [J]. Machining Science and Technology, 2006, 10(1): 23-58.
3. WANG Xibin. Green machining technology in metal cutting [J]. Chinese Journal of Mechanical Engineering, 2008, 36(8): 6-9. (in Chinese)
4. WEINERT K, INASAKI I, SUTHERLAND J W, et al. Dry machining and minimum quantity lubrication [J]. CIRP Annals-Manufacturing Technology, 2004, 53(2): 511-537.
5. DHAR N R, KAMRUZZAMAN M, AHMED M. Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel [J]. Journal of Materials Processing Technology, 2006, 172(2): 299-304.
6. RAHMAN M, SENTHIL KUMAR A, SALAM M U. Experimental evaluation on the effect of minimal quantities of lubricant in milling [J]. International Journal of Machine Tools & Manufacture, 2002, 42(5): 539-547.
7. HEINEMANN R, HINDUJA S, BARROW G, et al. Effect of MQL on the tool life of small twist drills in deep-hole drilling [J]. International Journal of Machine Tools & Manufacture, 2006, 46(1): 1-6.
8. DASILVA L R, BIANCHI E C, FUSSE R Y, et al. Analysis of surface integrity for minimum quantity lubricant-MQL in grinding [J]. International Journal of Machine Tools & Manufacture, 2007, 47(2): 412-418.
9. TAWAKOLI T, HADAD M J, SADEGHI M H. Influence of oil mist parameters on minimum quantity lubrication-MQL grinding process [J]. International Journal of Machine Tools & Manufacture, 2010, 50(6): 521-531.
10. LOPEZDELACALLE L N, ANGULO C, LAMIKIZ A, et al. Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling [J]. Journal of Materials Processing Technology, 2006, 172(1): 11-15.
11. YAN Lutao, YUAN Songmei, LIU Qiang. Tool wear and chip formation in green machining of high strength steel [J]. Chinese Journal of Mechanical Engineering, 2010, 46(9): 187-192. (in Chinese)
12. OBIKAWA T, ASANO Y, KAMATA Y. Computer fluid dynamics analysis for efficient spraying of oil mist in finish-turning of Inconel 718 [J]. International Journal of Machine Tools and Manufacture, 2009, 49(12-13): 971-978.
13. MARKSBERRY P W, JAWAHIR I S. A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing [J]. International Journal of Machine Tools & Manufacture, 2008, 48(7-8): 878-886.
14. ZHAO H, BARBER G C, ZOU Q. A study of flank wear in orthogonal cutting with internal cooling [J]. Wear, 2002, 253(9-10): 957-962.
15. DINIZ A E, FILHO J C. Influence of the relative positions of tool and workpiece on tool life, tool wear and surface in the face milling process [J]. Wear, 1999, 232(1): 67-75.
16. LIST G, NOUARI M, GEHIN D, et al. Wear behaviour of cemented carbide tools in dry machining of aluminium alloy [J]. Wear, 2005, 259(2): 1177-1189.
17. DHAR N R, PAUL S, CHATTOPADHYAY A B. The influence of cryogenic cooling on tool wear, dimensional accuracy and surface finish in turning AISI 1040 and E4340C steels [J]. Wear, 2001, 249(10-11): 932-942.
18. NING Y, RAHMAN, WONG Y S. Investigation of chip formation in high speed end milling [J]. Journal of Materials Processing Technology, 2001, 113(1-3): 360-367.
19. JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperature [C]//Proceedings of the Seventh International Symposium on Ballistics, The Hague, The Netherlands, 1983: 541-547.
20. SUN S, BRANDT M, DARGUSCH M S. Characteristics of cutting forces and chip formation in machining of titanium alloys [J]. International Journal of Machine Tools & Manufacture, 2009, 49(7-8): 561-568.
21. GINTING A, NOUARI M. Surface integrity of dry machined titanium alloys [J]. International Journal of Machine Tools & Manufacture, 2009, 49(3-4): 325-332.
22. AYKUT S, BAGCI E, KENTLI A, et al. Experimental observation of tool wear, cutting forces and chip morphology in face milling of cobalt based super-alloy with physical vapour deposition coated and uncoated tool [J]. Materials and Design, 2007, 28(6): 1880-1888.
23. ZHOU Q, MILLER P C H, WALKLATE P J, et al. Prediction of spray angle from flat fan nozzles [J]. Journal of Agricultural Engineering Research, 1996, 64(2): 139-148.
24. SUH H K, LEE C S. Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics [J]. International Journal of Heat and Fluid Flow, 2008, 29(4): 1001-1009.
25. HARRISON G M, MUN R, COOPER G, et al. A note on the effect of polymer rigidity and concentration on spray atomization [J]. Journal of Non-Newtonian Fluid Mechanics, 1999, 85(1): 93-104.
26. GAITONDE V N, KARNIK S R, DAVIM J P. Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass [J]. Journal of Materials Processing Technology, 2008, 204(1-3): 459-464.
27. TASDELEN B, WIKBLOM T, EKERED S. Studies on minimum quantity lubrication (MQL) and air cooling at drilling [J]. Journal of Materials Processing Technology, 2008, 200(1-3): 339-346.
28. LIAO Y S, LIN H M. Mechanism of minimum quantity lubrication in high-speed milling of hardened steel [J]. International Journal of Machine Tools & Manufacture, 2007, 47(11): 1660-1666.
29. VIKRAMKUMAR CH R, RAMAMOORTHY B. Performance of coated tools during hard turning under minimum fluid application [J]. Journal of Materials Processing Technology, 2007, 185(1-3): 210-216.
30. TASDELEN B, THORDENBERG H, OLOFSSON D. An experimental investigation on contact length during minimum quantity lubrication (MQL) machining [J]. Journal of Materials Processing Technology, 2008, 203(1-3): 221-231.
31. JUSLIN L, ANTIKAINEN O, MERKKU P, et al. Droplet size measurement: I. Effect of three independent variables on droplet size distribution and spray angle from a pneumatic nozzle [J]. International Journal of Pharmaceutics, 1995, 123(2): 247-256.
32. NAGESWARA RAO D, VAMSI KRISHNA P. The influence of solid lubricant particle size on machining parameters in turning [J]. International Journal of Machine Tools & Manufacture, 2008, 48(1): 107-111.