Effects of surface coating on reducing friction and wear of orthopaedic implants

Science and Technology of Advanced Materials

Volumn 15, Issue 1, 2014, Pages

  Ching, Hee Ay ^a   Choudhury, Dipankar ^a,b   Nine, Md Julker ^a   Abu Osman, Noor Azuan ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

artificial joints; friction; surface coating; wear

Indexed keywords

ARTIFICIAL JOINT; FABRICATION PARAMETERS; GRAPHITE-LIKE CARBONS; HIGH CONTACT PRESSURES; ORTHOPAEDIC IMPLANTS; SURFACE COATINGS; SYSTEMATIC LITERATURE REVIEW; TRIBOLOGICAL PROPERTIES;

CARBON; ELASTICITY; FRICTION; HARDNESS; JOINT PROSTHESES; TITANIUM NITRIDE; TRIBOLOGY; WEAR OF MATERIALS;

COATINGS;

EID: 84897741529     PISSN: 14686996     EISSN: None     Source Type: Journal    
DOI: 10.1088/1468-6996/15/1/014402     Document Type: Review

References (80)

1. Chen J, Wang Y, Li H, Ji L, Wu Y, Lv Y, Liu X, Fu Y and Zhou H 2013 Microstructure, morphology and properties of titanium containing graphite-like carbon films deposited by unbalanced magnetron sputtering Tribol. Lett. 49 47-59
2. Hoseini M, Jedenmalm A and Boldizar A 2008 Tribological investigation of coatings for artificial joints Wear 264 958-66
3. Xie D, Liu H, Deng X, Leng Y X and Huang N 2009 Deposition of a-C:H films on UHMWPE substrate and its wear-resistance Appl. Surf. Sci. 256 284-8
4. Huang L-Y, Xu K-W, Lu J, Guelorget B and Chen H 2001 Nano-scratch and fretting wear study of DLC coatings for biomedical application Diamond Relat. Mater. 10 1448-56
5. Manhabosco T M and Muller I L 2009 Electrodeposition of diamond-like carbon (DLC) films on Ti Appl. Surf. Sci. 255 4082-6
6. Balagna C, Faga M G and Spriano S 2012 Tantalum-based multilayer coating on cobalt alloys in total hip and knee replacement Mater. Sci. Eng. C 32 887-95
7. Spriano S, Vernè E, Faga M G, Bugliosi S and Maina G 2005 Surface treatment on an implant cobalt alloy for high biocompatibility and wear resistance Wear 259 919-25
8. Narayan R J 2005 Pulsed laser deposition of functionally gradient diamondlike carbon-metal nanocomposites Diamond Relat. Mater. 14 1319-30
9. Balla V K, Bhat A, Bose S and Bandyopadhyay A 2012 Laser processed TiN reinforced Ti6Al4 V composite coatings J. Mech. Behav. Biomed. Mater 6 9-20
10. Jiang S-W, Jiang B, Li Y, Li Y-R, Yin G-F and Zheng C-Q 2004 Friction and wear study of diamond-like carbon gradient coatings on Ti6Al4V substrate prepared by plasma source ion implant-ion beam enhanced deposition Appl. Surf. Sci. 236 285-91
11. Koseki H, Shindo H, Baba K, Fujikawa T, Sakai N, Sawae Y and Murakami T 2008 Surface-engineered metal-on-metal bearings improve the friction and wear properties of local area contact in total joint arthroplasty Surf. Coat. Technol. 202 4775-9
12. Holmberg K and Matthews A 1994 Coatings Tribology: Properties, Techniques and Applications in Surface Engineering vol 28 ed D Dowson (Amsterdam: Elsevier)
13. Wood R J 2007 Tribo-corrosion of coatings: a review J. Phys. D: Appl. Phys. 40 5502
14. Antunes R A and De Oliveira M C L 2009 Corrosion processes of physical vapor deposition-coated metallic implants Crit. Rev. Biomed. Eng. 37 425-60
15. Fauchais P and Vardelle A 2012 Thermal sprayed coatings used against corrosion and corrosive wear Advanced Plasma Spray Applications (Rjeka: InTech) chapter 1
16. Voevodin A, O'neill J and Zabinski J 1999 Tribological performance and tribochemistry of nanocrystalline WC/amorphous diamond-like carbon composites Thin Solid Films 342 194-200
17. Chowdhury S, Borham J, Catledge S A, Eberhardt A W, Johnson P S and Vohra Y K 2008 Synthesis and mechanical wear studies of ultra smooth nanostructured diamond (USND) coatings deposited by microwave plasma chemical vapor deposition with He/H2/CH4/N2 mixtures Diamond Relat. Mater. 17 419-27
18. Blunt L, Bills P, Jiang X, Hardaker C and Chakrabarty G 2009 The role of tribology and metrology in the latest development of bio-materials Wear 266 424-31
19. Yang S, Camino D, Jones A H S and Teer D G 2000 Deposition and tribological behaviour of sputtered carbon hard coatings Surf. Coat. Technol. 124 110-6
20. Zardiackas L D, Parsell D E, Dillon L D, Mitchell D W, Nunnery L A and Poggie R 2001 Structure, metallurgy and mechanical properties of a porous tantalum foam J. Biomed. Mater. Res. 58 180-7
21. Balla V K, Bodhak S, Bose S and Bandyopadhyay A 2010 Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties Acta Biomater. 6 3349-59
22. Findlay D M, Welldon K, Atkins G J, Howie D W, Zannettino A C W and Bobyn D 2004 The proliferation and phenotypic expression of human osteoblasts on tantalum metal Biomaterials 25 2215-27
23. Balla V, Bose S, Davies N and Bandyopadhyay A 2010 Tantalum - a bioactive metal for implants J. Mineral. Metal Mater. Soc. 62 61-4
24. Fox V, Jones A, Renevier N M and Teer D G 2000 Hard lubricating coatings for cutting and forming tools and mechanical components Surf. Coat. Technol. 125 347-53
25. Taeger G, Podleska L E, Schmidt B, Ziegler M and Nast-Kolb D 2003 Comparison of diamond-like-carbon and alumina-oxide articulating with polyethylene in total hip arthroplasty Materialwissenschaft und Werkstofftechnik 34 1094-100
26. Paskvale S, Kahn M, Čekada M, Panjan P, Waldhauser W and Podgornik B 2011 Tribological properties of diamond-like carbon coatings prepared by anode layer source and magnetron sputtering Surf. Coat. Technol. 205 S99-S102
27. Ali S S, Hardt J I, Quick K L, Sook Kim-Han J, Erlanger B F, Huang T-T, Epstein C J and Dugan L L 2004 A biologically effective fullerene (C60) derivative with superoxide dismutase mimetic properties Free Radical Biol. Med. 37 1191-202
28. Schneider A, Steinmueller-Nethl D, Roy M and Franek F 2010 Enhanced tribological performances of nanocrystalline diamond film Int. J. Refractory Metals Hard Mater. 28 40-50
29. Mitura S K M, Niedzielski P, Louda P and Danilenko V 2006 Nanocrystalline diamond, its synthesis, properties and applications J. Achievements Mater. Manuf. Eng. 16 9-16
30. Röstlund T, Albrektsson B, Albrektsson T and McKellop H 1989 Wear of ion-implanted pure titanium against UHMWPE Biomaterials 10 176-81
31. Stone D S, Yoder K B and Sproul W D 1991 Hardness and elastic modulus of TiN based on continuous indentation technique and new correlation J. Vac. Sci. Technol. A 9 2543-7
32. Heide N S and J W 1993 Corrosion stability of TiN prepared by ion implantation and PVD Nucl. Instrum. Methods Phys. Res. B 80-81 467-71
33. Scarano A, Piattelli M, Vrespa G, Caputi S and Piattelli A 2003 Bacterial adhesion on titanium nitride-coated and uncoated implants: an in vivo human study J. Oral Implantol. 29 80-5
34. Raay J J A M, Rozing P M, Blitterswijk C A, Haastert R M and Koerten H K 1995 Biocompatibility of wear-resistant coatings in orthopaedic surgery in vitro testing with human fibroblast cell cultures J. Mater. Sci: Mater. Med. 6 80-4
35. Lappalainen R and Santavirta S S 2005 Potential of coatings in total hip replacement Clin. Orthop. Relat. Res. 430 72-9
36. Marti A 2000 Cobalt-base alloys used in bone surgery Injury 31 D18-21
37. Granchi D, Cenni E, Tigani D, Trisolino G, Baldini N and Giunti A 2008 Sensitivity to implant materials in patients with total knee arthroplasties Biomaterials 29 1494-500
38. Cobb A G and Schmalzreid T P 2006 The clinical significance of metal ion release from cobalt-chromium metal-on-metal hip joint arthroplasty Proc. Inst. Mech. Eng. H 220 385-98
39. Greenwald A S 2001 Alternative Bearing Surfaces: The Good, The Bad, and the Ugly ed A A O O Surgeons (San Francisco, CA: JBJS Am) pp 68-72
40. Elias C N, Lima J H C, Valiev R and Meyers M A 2008 Biomedical applications of titanium and its alloys JOM 60 46-9
41. Herman Shah Abd Rahman D C, Abu Osman N C, Shasmin H N and Wan Abu Bakar W A 2013 In vivo and in vitro outcomes of alumina, zirconia and their composited ceramic-on-ceramic hip joints J. Ceram. Soc. Japan 121 382-7
42. Lima M S F, Folio F and Mischler S 2005 Microstructure and surface properties of laser-remelted titanium nitride coatings on titanium Surf. Coat. Technol. 199 83-91
43. Camino D, Jones A H S, Mercs D and Teer D 1999 High performance sputtered carbon coatings for wear resistant applications Vacuum 52 125-31
44. Bunshah R F 1982 Deposition technologies: an overview Deposition Technologies for Films and Coatings: Developments and Applications (Park Ridge, NJ: Noyes Publication) pp 1-18
45. Su Y, Yao S, Leu Z, Wei C and Wu C 1997 Comparison of tribological behavior of three films - TiN, TiCN and CrN - grown by physical vapor deposition Wear 213 165-74
46. Lawn B R 2002 Ceramic-based layer structures for biomechanical applications Curr. Opin. Solid State Mater. Sci. 6 229-35
47. Choy K L 2003 Chemical vapour deposition of coatings Prog. Mater. Sci. 48 57-170
48. Liu Y, Erdemir A and Meletis E I 1996 A study of the wear mechanism of diamond-like carbon films Surf. Coat. Technol. 82 48-56
49. Casiraghi C, Ferrari A and Robertson J 2005 Raman spectroscopy of hydrogenated amorphous carbons Phys. Rev. B 72 085401
50. Dipankar Choudhury R W, Shirvani A and Mootanah R 2013 The influence of honed surfaces on metal-on-metal hip joints Japan. Soc. Tribol. 8 195-202
51. Jacobson S and Hogmark S 2002 On the tribological character of boundary lubricated DLC coated components Tribol. Ser. 40 337-45
52. Li X D and Bhushan B 1999 Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings J. Mater. Res. 14 2328-37
53. Sondi I, Salopek-Sondi B, Škapin S D, Šegota S, Jurina I and Vukelić B 2011 Colloid-chemical processes in the growth and design of the bio-inorganic aragonite structure in the Scleractinian coral Cladocora caespitosa J. Colloid Interface Sci. 354 181-9
54. Piconi C, Maccauro G and Muratori F 2004 Bioceramics in Joint Arthroplasty ed J-Y Lazennec and M Dietrich (Darmstadt: Steinkopff) pp 105-9
55. Puértolas J A, Martínez-Nogués V, Martínez-Morlanes M J, Mariscal M D, Medel F J, López-Santos C and Yubero F 2010 Improved wear performance of ultra high molecular weight polyethylene coated with hydrogenated diamond like carbon Wear 269 458-65
56. Tsubone D, Hasebe T, Kamijo A and Hotta A 2007 Fracture mechanics of diamond-like carbon (DLC) films coated on flexible polymer substrates Surf. Coat. Technol. 201 6423-30
57. Rieker C P K 2002 In vivo tribological performance of 231 metal-on-metal hip articulations Hip Int. 12 73-6
58. Matthews J B, Green T R, Stone M H, Mike Wroblewski B, Fisher J and Ingham E 2000 Comparison of the response of primary human peripheral blood mononuclear phagocytes from different donors to challenge with model polyethylene particles of known size and dose Biomaterials 21 2033-44
59. Smith R A and Hallab N J 2010 In vitro macrophage response to polyethylene and polycarbonate-urethane particles J. Biomed. Mater. Res. Part A 93 347-55
60. Green T R, Fisher J, Matthews J B, Stone M H and Ingham E 2000 Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles J. Biomed. Mater. Res. 53 490-7
61. Minn M and Sinha S K 2010 Tribology of ultra high molecular weight polyethylene film on Si substrate with chromium nitride, titanium nitride and diamond like carbon as intermediate layers Thin Solid Films 518 3830-6
62. Sinha S K 2002 Wear Failures of Plastics vol 11 (Materials Park, OH: ASM International)
63. Park S J, Lee K-R and Ko D-H 2005 Tribological behavior of nano-undulated surface of diamond-like carbon films Diamond Relat. Mater. 14 1291-6
64. Vamsi Krishna Balla S B and Bandyopadhyay A 2010 Direct laser processing of tantalum coating on titanium for bone replacement structures Acta Biomater. 6 2329-34
65. Hauert R 2003 A review of modified DLC coatings for biological applications Diamond Relat. Mater. 12 583-9
66. Kwok S C H, Wang J and Chu P K 2005 Surface energy, wettability, and blood compatibility phosphorus doped diamond-like carbon films Diamond Relat. Mater. 14 78-85
67. McKellop H, Clarke I, Markolf K and Amstutz H 1981 Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multichannel screening device J. Biomed. Mater. Res. 15 619-53
68. Schildhauer T A, Robie B, Muhr G and Köller M 2006 Bacterial adherence to tantalum versus commonly used orthopedic metallic implant materials J. Orthopaedic Trauma 20 476-84
69. Love C A, Cook R B, Harvey T J, Dearnley P A and Wood R J K 2013 Diamond like carbon coatings for potential application in biological implants - a review Tribol. Int. 63 141-50
70. Serro A P, Completo C, Colaço R, dos Santos F, da Silva C L, Cabral J M S, Araújo H, Pires E and Saramago B 2009 A comparative study of titanium nitrides, TiN, TiNbN and TiCN, as coatings for biomedical applications Surf. Coat. Technol. 203 3701-7
71. He W, Yu R, Wang H and Yan H 2005 Electrodeposition mechanism of hydrogen-free diamond-like carbon films from organic electrolytes Carbon 43 2000-6
72. Golden T D 2004 Improvement of homogeneity and adhesion of diamond-like carbon films on copper substrates MSc Thesis University of North Texas (available at: http://digital.library.unt.edu/ark:/67531/metadc4565/)
73. Van der Biest O O and Vandeperre L J 1999 Electrophoretic deposition of materials Annu. Rev. Mater. Sci. 29 327-52
74. Saikko V, Calonius O and Keranen J 2004 Effect of slide track shape on the wear of ultra-high molecular weight polyethylene in a pin-on-disc wear simulation of total hip prosthesis J. Biomed. Mater Res. B Appl. Biomater. 69 141-8
75. Leyland A and Matthews A 2000 On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour Wear 246 1-11
76. Akkurt S 1995 On the effect of surface roughness on wear of acetal-metal gear pairs Wear 184 107-9
77. Balagna C, Spriano S and Faga M G 2012 Characterization of Co-Cr-Mo alloys after a thermal treatment for high wear resistance Mater. Sci. Eng. C 32 1868-77
78. Wang Y J, Li H X, Ji L, Liu X H, Wu Y X, Lv Y H, Fu Y Y, Zhou H D and Chen J M 2012 Synthesis and characterization of titanium-containing graphite-like carbon films with low internal stress and superior tribological properties J. Phys. D: Appl. Phys. 45 295301
79. Ohgoe Y, Hirakuri K K, Saitoh H, Nakahigashi T, Ohtake N, Hirata A, Kanda K, Hiratsuka M and Fukui Y 2012 Classification of DLC films in terms of biological response Surf. Coat. Technol. 207 350-4
80. Manhabosco T M and Müller I L 2009 Tribocorrosion of diamond-like carbon deposited on Ti6Al4V Tribol. Lett. 33 193-7