Surface engineered polymeric biomaterials with improved biocontact properties

International Journal of Polymer Science

Volumn 2010, Issue , 2010, Pages

  Vladkova, Todorka G ^a  

^a UNIVERSITY OF CHEMICAL TECHNOLOGY AND METALLURGY   (Bulgaria)

Author keywords

[No Author keywords available]

Indexed keywords

CELL CULTURE; CELL ENGINEERING; POLYMERS; TISSUE;

CELLULAR INTERACTION; CONTACTING DEVICES; MODIFIED LAYER; NANO-SIZE; POLYMERIC BIOMATERIALS; PROTEIN ADSORPTION;

SCAFFOLDS (BIOLOGY);

EID: 84897433303     PISSN: 16879422     EISSN: 16879430     Source Type: Journal    
DOI: 10.1155/2010/296094     Document Type: Review

References (276)

1. N. Minoura, S. Aiba, Y. Fujiwara, N. Koshizaki, and Y. Imai, "The interaction of cultured cells withmembranes composed of random and block copolypeptides," Journal of Biomedical Materials Research, vol. 23, no. 2, pp. 267-279, 1989. (Pubitemid 19042071)
2. R. Large, MRS Bulletin, vol. 31, p. 447, 2004.
3. B.-S. Kim and D. J. Mooney, "Development of biocompatible synthetic extracellular matrices for tissue engineering," Trends in Biotechnology, vol. 16, no. 5, pp. 224-229, 1998. (Pubitemid 28238058)
4. R. Langer and J. P. Vacanti, "Tissue engineering," Science, vol. 260, no. 5110, pp. 920-926, 1993.
5. L. L. Hench and J. M. Polak, "Third-generation biomedical materials," Science, vol. 295, no. 5557, pp. 1014-1017, 2002.
6. J. Anderson, "A forecast of the future for biomaterials," in Proceedings of the Future of Biomedical Materials (key note), Symposium, Imperial Colleage London, September 2005.
7. S. E. Sakiyama-Elbert and J. A. Hubbell, "Functional biomaterials: design of novel biomaterials," Annual Review of Materials Science, vol. 31, pp. 183-201, 2001.
8. L. Bachakova, Physiological Research, vol. 53, pp. 35-45, 2004.
9. C.-G. Gölander, Preparation and properties of functionalized polymer surfaces, Ph.D. thesis, The Royal Institute of Technology, Stockholm, Sweden, 1986.
10. M. Malmsten, Ed., Biopolymers at Interfaces, Marcel Dekker, New York, NY, USA, 1998.
11. S. Pasche, Mechanisms of protein resistance of adsorbed PEG-Graft copolymers, D.Sc. thesis, Swiss Federal Institute of Technology, Zurich, Switzerland, 2004.
12. S. Drotleff, Polymers and protein-conjugates for tissue engineering, Ph.D. thesis, University of Regensburg, Regensburg, Germany, 2006.
13. V. Hlady, R. A. VanWagenen, and J. D. Andrade, in Surface and Interfacial Aspects of Biomedical Polymers, J. D. Andrade, Ed., vol. 2, p. 81, Plenum Press, New York, NY, USA, 1985.
14. M. Jager, C. Zilkens, K. Zanger, and R. Krauspe, "Significance of nano- and microtopography for cell-suraface interactions in orthopedic implants," Journal of Biomedicine and Biotechnology, vol. 2007, Article ID 69036, 2007.
15. G. Altankov, Cell/biomaterial surfaces interaction, D.Sc. thesis, Institute of Biophysics, BAS, Sofia, Bulgaria, 2003.
16. F. Grinnell and M. K. Feld, "Adsorption characteristics of plasma fibronectin in relationship to biological activity," Journal of Biomedical Materials Research, vol. 15, no. 3, pp. 363-381, 1981. (Pubitemid 11159647)
17. J. D. Andrade and V. Hlady, "Protein adsorption and materials biocompatibility. A tutorial review and suggested hypothesis," Progress in Surface Science, vol. 79, pp. 1-63, 1986.
18. V. Prasad, "Strategies for de novo engineering of tissues," in Proceedings of the NATO ARW Nano-Engineered Systems for Regenerative Medicine, Varna, Bulgaria, September 2007.
19. J. Panell, "Material surface effects on biological interactions," in Proceedings of the NATO ARWNano-Engineered Systems for Regenerative Medicine, Varna, Bulgaria, September 2007.
20. J. Champion, "UROs, tacos, worms and surfboards: what they teach about material-cell interactions," in Proceedings of the NATO ARW Nano-Engineered Systems for Regenerative Medicine, Varna, Bulgaria, September 2007.
21. W. Senaratne, P. Sengupta, V. Jakubek, D. Holowka, C. K. Ober, and B. Baird, "Functionalized surface arrays for spatial targeting of immune cell signaling," Journal of the American Chemical Society, vol. 128, no. 17, pp. 5594-5595, 2006. (Pubitemid 43724336)
22. W. Senaratne, L. Andruzzi, and C. K. Ober, "Self-assembled monolayers and polymer brushes in biotechnology: current applications and future perspectives," Biomacromolecules, vol. 6, no. 5, pp. 2427-2448, 2005. (Pubitemid 41397904)
23. S. Sano, K. Kato, and Y. Ikada, "Introduction of functional groups onto the surface of polyethylene for protein immobilization," Biomaterials, vol. 14, no. 11, pp. 817-822, 1993. (Pubitemid 23272147)
24. A. Hoffman, Annals of the New York Academy of Sciences, pp. 97-101, 1988.
25. P. K. Chu, J. Y. Chen, L. P. Wang, and N. Huang, "Plasma-surface modification of biomaterials," Materials Science and Engineering, vol. 36, no. 5-6, pp. 143-206, 2002.
26. C. M. Chan, Polymer Surface Modification and Characterization, chapters 5-7, Hanser, Brookfield, Wis, USA, 1993.
27. F. Abbasi, H. Mirzadeh, and A.-A. Katbab, "Modification of polysiloxane polymers for biomedical applications: a review," Polymer International, vol. 50, no. 12, pp. 1279-1287, 2001. (Pubitemid 34039540)
28. U. Vohrer, "Interfacial engineering of functional textiles for biomedical applications," in Plasma Technologies for Textiles, R. Shishoo, Ed., p. 202, CRC Press; Boca Raton, Fla, USA, Woodhead, Cambridge, UK, 2007.
29. C.-M. Chan, T.-M. Ko, and H. Hiraoka, "Polymer surface modification by plasmas and photons," Surface Science Reports, vol. 24, no. 1-2, pp. 1-54, 1996. (Pubitemid 126383843)
30. K. R. Rau, Surface modification of biomaterials by pulsed laser ablasion deposition and plasma/gamma polymerization, Ph.D. thesis, University of Florida, Gainesville, Fla, USA, 2001.
31. R. Shishoo, Ed., Plasma Technologies for Textiles, CRC Press; Boca Raton, Fla, USA, Woodhead, Cambridge, UK, 2007.
32. A. Denizli, E. Piskin, V. Dixit, M. Arthur, and G. Gitnick, "Collagen and fibronectin immobilization of PHEMA micro-carriers for hepatocyte attachment," International Journal of Artificial Organs, vol. 18, no. 2, pp. 90-95, 1995.
33. S. Jaumotte-Thelen, I. Dozot-Dupont, J. Marchand-Brynaert, and Y.-J. Schneider, "Covalent grafting of fibronectin and asialofetuin at surface of poly(ethylene terephthalate) track-etched membranes improves adhesion but not differentiation of rat hepatocytes," Journal of Biomedical Materials Research, vol. 32, no. 4, pp. 569-582, 1996. (Pubitemid 26403522)
34. R. Chen and J. A.Hunt, "Biomimetic materials processing for tissue-engineering processes," Journal ofMaterials Chemistry, vol. 17, no. 38, pp. 3974-3979, 2007.
35. S. P. Massia and J. A. Hubbell, "Human endothelial cell interactions with surface-coupled adhesion peptides on a nonadhesive glass substrate and two polymeric biomaterials," Journal of Biomedical Materials Research, vol. 25, no. 2, pp. 223-242, 1991.
36. Y. Ykada, M. Suzuki, and Y. Tamada, "Polymer surfaces possessing minimal interaction with blood components," in Polymers as Biomaterials, Plenum Press, New York, NY, USA, 1984.
37. S. E. Sakiyama-Elbert and J. A. Hubbell, "Functional biomaterials: design of novel biomaterials," Annual Review of Materials Science, vol. 31, pp. 183-201, 2001.
38. B. D. Ratner, Biocompatibility of Clinical Implant Materials, vol. 2 of D. W. Williams, Eds., CRC Press, Boca Raton, Fla, USA, 1981.
39. A. S. Hoffman, T. A. Horbett, and B. D. Ratner, "Interactions of blood and blood components at hydrogel interfaces," Annals of the New York Academy of Sciences, vol. 283, pp. 372-382, 1977.
40. W. Kim and J. Feijen, " Surface modification of polymers for improved blood compatibility," CRC Critical Reviews in Biocompatibility, vol. 1, p. 229, 1985.
41. K. Ishihara, Biocompatible Polymers, CRC Press, London, UK, 1994.
42. B. D. Ratner and A. S. Hoffman, "Non-fouling surfaces," in Biomaterials Science, B. D. Ratner, A. S.Hoffman, F. J. Schoen, and J. E. Lemons, Eds., pp. 197-201, Elsevier, San Diego, Calif, USA, 2nd edition, 2004.
43. J. M. Harries, Ed., Poly(Ethylene Glycol) Chemistry. Biomedical and Biotechnical Applications, Plenum Press, New York, NY, USA, 1992.
44. C.-G. Gölander, S. Jönsson, T. Vladkova, P. Stenius, and J. C. Eriksson, "Preparation and protein adsorption properties of photopolymerized hydrophilic films containing N-vinylpyrrolidone (NVP), acrylic acid (AA) or ethyleneoxide (EO) units as studied by ESCA," Colloids & Surfaces, vol. 21, pp. 149-165, 1986. (Pubitemid 17514102)
45. C.-G. Gölander, E.-S. Jönsson, T. Vladkova, et al., "Protein adsorption on some photo-polymerized hydrophilic films," in Proceedings of the 8th International Symposium on Plasma Chemistry (IUPAC '87), vol. 8.27, Sofia, Bulgaria, July 1987.
46. M. Malmsten and J. M. Van Alstine, "Adsorption of poly(ethylene glycol) amphiphiles to form coatings which inhibit protein adsorption," Journal of Colloid and Interface Science, vol. 177, no. 2, pp. 502-512, 1996. (Pubitemid 26166486)
47. C.-G. Gölander, E.-S. Jönsson, and T. G. Vladkova, "EP022966 (B1); WO8602087 (A1); US4840851 (A); SU1729284 (A3); SE8404866 (L); SE444950 (B); NO861998 (A); JP62500307 (T); DK248986 (A); AU4965185 (A)".
48. T. Vladkova, "Modification of polymer surfaces for medical application," in Proceedings of the 13th Science Conference "Modification of Polymers", Kudowa Zdroj, Poland, September 1995.
49. T. G. Vladkova, C.-G. Gölander, S. C. Christoskova, and E.-S. J önsson, "Mechanically stable hydrophilic films based on oxialkylated macromers polymerizable by UV irradiation," Polymers for Advanced Technologies, vol. 8, no. 6, pp. 347-350, 1997.
50. T. Vladkova, Some Possibilities to Polymer Surface Modification, UCTM Ed. Centre, Sofia, Bulgaria, 2001.
51. T. Vladkova, E.-S. Jönsson, and C.-G. Gölander, "Surface modification of natural rubber latex films by peg hydrogel coating," Journal of University of Chemical Technology and Metallurgy, vol. 38, p. 131, 2003.
52. T. Vladkova, "Surface modification of silicone rubber with poly(ethylene glycol) hydrogel coatings," Journal of Applied Polymer Science, vol. 92, no. 3, pp. 1486-1492, 2004. (Pubitemid 38517665)
53. R. Bischoff and G. Bischoff, in Proceedings of the 11th Conference of the European Society of Biomechanics, Touluse, France, July 1998.
54. B. P. Lee, K. Huang, F. N. Nunalee, K. Shull, and P. B.Messersmith, "Synthesis of 3,4-dihydroxyphenylalanine (DOPA) containing monomers and their co-polymerization with PEG-diacrylate to form hydrogels," Journal of Biomaterials Science, Polymer Edition, vol. 15, no. 4, pp. 449-464, 2004. (Pubitemid 38594126)
55. I. K. Kwon and T. Matsuda, "Photo-iniferter-based thermoresponsive block copolymers composed of poly(ethylene glycol) and poly(N- isopropylacrylamide) and chondrocyte immobilization," Biomaterials, vol. 27, no. 7, pp. 986-995, 2006. (Pubitemid 41566690)
56. M. S. Hahn, L. J. Taite, J. J. Moon, M. C. Rowland, K. A. Ruffino, and J. L. West, "Photolithographic patterning of polyethylene glycol hydrogels," Biomaterials, vol. 27, no. 12, pp. 2519-2524, 2006.
57. S. Kizilel, E. Sawardecker, F. Teymour, and V. H. Pérez-Luna, "Sequential formation of covalently bonded hydrogel multilayers through surface initiated photopolymerization," Biomaterials, vol. 27, no. 8, pp. 1209-1215, 2006. (Pubitemid 41739544)
58. Y. Ito, H. Hasuda, M. Sakuragi, and S. Tsuzuki, "Surface modification of plastic, glass and titanium by photoimmobilization of polyethylene glycol for antibiofouling," Acta Biomaterialia, vol. 3, no. 6, pp. 1024-1032, 2007. (Pubitemid 47382674)
59. E. Kiss, C.-G. Gölander, and J. C. Eriksson, "Surface grafting of polyethyleneoxide optimized by means of ESCA," Progress in Colloid&Polymer Science, vol. 74, no. 1, pp. 113-119, 1987.
60. C. L. Feng, Z. Zhang, R. Förch, W. Knoll, G. J. Vancso, andH. Schönherr, "Reactive thin polymer films as platforms for the immobilization of biomolecules," Biomacromolecules, vol. 6, no. 6, pp. 3243-3251, 2005. (Pubitemid 41764085)
61. R. Schlapak, P. Pammer, D. Armitage, et al., "Glass surfaces grafted with high-density poly(ethylene glycol) as substrates for DNA oligonucleotide microarrays," Langmuir, vol. 22, no. 1, pp. 277-285, 2006. (Pubitemid 43063549)
62. S. Patel, R. G. Thakar, J. Wong, S. D. McLeod, and S. Li, "Control of cell adhesion on poly(methyl methacrylate)," Biomaterials, vol. 27, no. 14, pp. 2890-2897, 2006. (Pubitemid 43165758)
63. Y. Li, C. G. Worley, R. W. Linton, J. M. DeSimone, and E. T. Samulski, "Grafting of poly(ethylene oxide) to crosslinked polystyrene and polypropylene substrates with well-controlled chain length and functionalities," Division of Polymer Chemistry-American Chemical Society, vol. 37, no. 2, pp. 737-738, 1996. (Pubitemid 126514279)
64. K.C. Popat, G. Mor, C. A. Grimes, and T. A. Desai, "Surface modification of nanoporous alumina surfaces with poly(ethylene glycol)," Langmuir, vol. 20, no. 19, pp. 8035-8041, 2004.
65. J. Piehler, A. Brecht, R. Valiokas, B. Liedberg, and G. Gauglitz, "A high-density poly(ethylene glycol) polymer brush for immobilization on glass-type surfaces," Biosensors and Bioelectronics, vol. 15, no. 9-10, pp. 473-481, 2000.
66. Z.-K. Xu, F.-Q. Nie, C. Qu, L.-S. Wan, J. Wu, and K. Yao, "Tethering poly(ethylene glycol)s to improve the surface biocompatibility of poly(acrylonitrile-co-maleic acid) asymmetric membranes," Biomaterials, vol. 26, no. 6, pp. 589-598, 2005. (Pubitemid 38988301)
67. J. Groll, T. Ameringer, J. P. Spatz, and M. Moeller, "Ultrathin coatings from isocyanate-terminated star PEG prepolymers: layer formation and characterization," Langmuir, vol. 21, no. 5, pp. 1991-1999, 2005. (Pubitemid 40338632)
68. I. Choi, S. K. Kang, J. Lee, Y. Kim, and J. Yi, "In situ observation of biomolecules patterned on a PEG-modified Si surface by scanning probe lithography," Biomaterials, vol. 27, no. 26, pp. 4655-4660, 2006. (Pubitemid 43783218)
69. H.Xu, J. L. Kaar, A. J. Russell, andW. R.Wagner, "Characterizing the modification of surface proteins with poly(ethylene glycol) to interrupt platelet adhesion," Biomaterials, vol. 27, no. 16, pp. 3125-3135, 2006.
70. Y. G. Ko, Y. H. Kim, K. D. Park, et al., "Immobilization of poly(ethylene glycol) or its sulfonate onto polymer surfaces by ozone oxidation," Biomaterials, vol. 22, no. 15, pp. 2115-2123, 2001.
71. R. P. Sebra, K. S. Masters, C. Y. Cheung, C. N. Bowman, and K. S. Anseth, "Detection of antigens in biologically complex fluids with photografted whole antibodies," Analytical Chemistry, vol. 78, no. 9, pp. 3144-3151, 2006.
72. M. Beyer, T. Felgenhauer, F. R. Bischoff, F. Breitling, and V. Stadler, "A novel glass slide-based peptide array support with high functionality resisting non-specific protein adsorption," Biomaterials, vol. 27, no. 18, pp. 3505-3514, 2006.
73. D. Xiao, H. Zhang, and M. Wirth, "Chemical modification of the surface of poly(dimethylsiloxane) by atom-transfer radical polymerization of acrylamide," Langmuir, vol. 18, no. 25, pp. 9971-9976, 2002.
74. T. Goda, T. Konno, M. Takai, T. Moro, and K. Ishihara, "Biomimetic phosphorylcholine polymer grafting from polydimethylsiloxane surface using photo-induced polymerization," Biomaterials, vol. 27, no. 30, pp. 5151-5160, 2006. (Pubitemid 44080302)
75. T. Vladkova, N. Krasteva, A. Kostadinova, and G. Altankov, "Preparation of PEG-coated surfaces and a study for their interaction with living cells," Journal of Biomaterials Science, Polymer Edition, vol. 10, no. 6, pp. 609-620, 1999. (Pubitemid 29259803)
76. S. P. Massia, J. Stark, and D. S. Letbetter, "Surface-immobilized dextran limits cell adhesion and spreading," Biomaterials, vol. 21, no. 22, pp. 2253-2261, 2000.
77. S. K. Thanawala and M. K. Chaudhury, "Surface modification of silicone elastomer using perfluorinated ether," Langmuir, vol. 16, no. 3, pp. 1256-1260, 2000.
78. S. Yang, J. Wang, K. Ogino, S. Valiyaveettil, and C. K. Ober, "Low-surface-energy fluoromethacrylate block copolymers with patternable elements," Chemistry of Materials, vol. 12, no. 1, pp. 33-40, 2000.
79. L. Andruzzi, W. Senaratne, A. Hexemer, et al., "Oligo(ethylene glycol) containing polymer brushes as bioselective surfaces," Langmuir, vol. 21, no. 6, pp. 2495-2504, 2005. (Pubitemid 40421901)
80. S. S. Hwang, C. K. Ober, S. Perutz, D. R. Iyengar, L. A. Schneggenburger, and E. J. Kramer, "Block copolymers with low surface energy segments: siloxane- and perfluoroalkane-modified blocks," Polymer, vol. 36, no. 6, pp. 1321-1325, 1995.
81. S. Krishnan, R. Ayothi, A. Hexemer, et al., "Anti-biofouling properties of comblike block copolymers with amphiphilic side chains," Langmuir, vol. 22, no. 11, pp. 5075-5086, 2006. (Pubitemid 44012074)
82. S. Krishnan, N. Wang, C. Ober, C. Finlay, J. Callow, and M. Callow, Biomacromolecules, vol. 117, pp. 2775-2783, 2009.
83. T. Vladkova, "Modification of polymer surfaces for medical application," in Proceedings of the 13th International Science Conference "Modification of Polymers", Kudowa Zdroj, Poland, September 1995.
84. Y. Kicheva, T. Vladkova, V. Kostov, and C.-G. Gölander, "Preparation of surface modified PVC drain tubing and in vivo study of their biocompatibility," Journal of the University of Chemical Technology and Metallurgy, vol. 37, pp. 77-84, 2002.
85. Y. Kicheva, V. Kostov, M. Mateev, and T. Vladkova, "In vitro and in vivo evaluation of biocompatibility of PVC materials with modified surfaces," in Proceedings of the 6th Colloquium on Biomaterials, Aahen, Germany, September 2002.
86. P. Sioshansi and E. J. Tobin, "Surface treatment of biomaterials by ion beam processes," Surface and Coatings Technology, vol. 83, no. 1-3, pp. 175-182, 1996. (Pubitemid 126379954)
87. M. Szicher, P. Sioshansi, and E. Frish, Biomaterials for the 1990s:Polyurethanes, Silicones, and Ion Beam Modification Techniques, Part 2, Spire, Bedford, Mass, USA, 1990.
88. M. Inoue, Y. Suzuki, and T. Takagi, "Review of Ion Engineering Center and related projects in Ion Engineering Research Institute," Nuclear Instruments and Methods in Physics Research B, vol. 121, no. 1-4, pp. 1-6, 1997. (Pubitemid 127426778)
89. I. F. Husein, C. Chan, and P. K. Chu, "Chemical structure modification of silicone surfaces by plasma immersion ion implantation," Journal of Materials Science Letters, vol. 19, no. 21, pp. 1883-1885, 2000. (Pubitemid 32024980)
90. I. F. Husein, C. Chan, S. Qin, and P. K. Chu, "The effect of high-dose nitrogen plasma immersion ion implantation on silicone surfaces," Journal of Physics D, vol. 33, no. 22, pp. 2869-2874, 2000.
91. C. Satriano, S. Carnazza, S. Guglielmino, and G. Marletta, "Differential cultured fibroblast behavior on plasma and ion-beam-modified polysiloxane surfaces," Langmuir, vol. 18, no. 24, pp. 9469-9475, 2002. (Pubitemid 35458209)
92. B. Bhushan, D. Hansford, and K. K. Lee, "Surface modification of silicon and polydimethylsiloxane surfaces with vapor-phase-deposited ultrathin fluorosilane films for biomedical nanodevices," Journal of Vacuum Science and Technology A, vol. 24, no. 4, pp. 1197-1202, 2006. (Pubitemid 43954862)
93. W. J. Sear, P. P. Capek, and F. J. Clubb, in Proceedings of the 40th Annual Conference on ADAIO, New York, NY, USA, April 1998.
94. L. Hakelius and L. Ohlsen, "A clinical comparison of the tendency to capsular contracture between smooth and textured gel-filled silicone mammary implants," Plastic and Reconstructive Surgery, vol. 90, no. 2, pp. 247-254, 1992.
95. K. Ishihara, "Blood compatible polymers," in Biomedical Applications of Polymeric Materials, T. Tsuruta, T. Hyashi, K. Kataoka, K. Ishihara, and Y. Kimura, Eds., CRC Press, Boca Raton, Fla, USA, 1993.
96. D.-C. Sin, H.-L. Kei, and X. Miao, "Surface coatings for ventricular assist devices," Expert Review of Medical Devices, vol. 6, no. 1, pp. 51-60, 2009.
97. P. Claesson and C.-G. Gölander, Colloids and Surfaces, vol. 20, p. 186, 1995.
98. D. L. Coleman, D. E. Gregonis, and J. D. Andrade, "Bloodmaterials interactions: the minimum interfacial free energy and the optimum polar/apolar ratio hypotheses," Journal of Biomedical Materials Research, vol. 16, no. 4, pp. 381-398, 1982.
99. M. D. Lelah, J. A. Pierce, L. K. Lambrecht, and S. L. Cooper, "Polyether-urethane ionomers: surface property/ex vivo blood compatibility relationships," Journal of Colloid and Interface Science, vol. 104, no. 2, pp. 422-439, 1985.
100. S. Nagaoka, Y. Mory, and S. Nishiumi, "Interaction between blood components and hydrogels with polyoxyethylene chains," Polymer Preprints, vol. 34, no. 1, p. 67, 1983.
101. H. Tanzawa, "Biomedical polymers: current status and overview," in Biomedical Applications of Polymeric Materials, T. Tsuruta, T. Hayashi, K. Kataoka, K. Ishihara, and Y. Kimura, Eds., p. 12, CRC Press, Boca Raton, Fla, USA, 1993.
102. S. Hattori, J. D. Andrade, J. B. Hibbs Jr., D. E. Gregonis, and R. N. King, "Fibroblast cell proliferation on charged hydroxyethyl methacrylate copolymers," Journal of Colloid and Interface Science, vol. 104, no. 1, pp. 72-78, 1985.
103. N. Minoura, S. Aiba, Y. Fujiwara, N. Koshizaki, and Y. Imai, "The interaction of cultured cells withmembranes composed of random and block copolypeptides," Journal of Biomedical Materials Research, vol. 23, no. 2, pp. 267-279, 1989. (Pubitemid 19042071)
104. H. Sato, A. Nakajima, T. Hayashi, G. W. Chen, and Y. Noishiki, "Microheterophase structure, permeability, and biocompatibility of A-B-A triblock copolymer membranes composed of poly(gamma-ethyl L-glutamate) as the A component and polybutadiene as the B component," Journal of Biomedical Materials Research, vol. 19, no. 9, pp. 1135-1155, 1985. (Pubitemid 16214583)
105. T. Okano, T. Aoyagi, K. Kataoka, et al., "Hydrophilichydrophobic microdomain surfaces having an ability to suppress platelet aggregation and their in vitro antithrombogenicity," Journal of Biomedical Materials Research, vol. 20, no. 7, pp. 919-927, 1986. (Pubitemid 17173545)
106. T. Okano, M. Uruno, N. Sugiyama, et al., "Suppression of platelet activity on microdomain surfaces of 2-hydroxyethyl methacrylate-polyether block copolymers," Journal of Biomedical Materials Research, vol. 20, no. 7, pp. 1035-1047, 1986. (Pubitemid 17173554)
107. K. D. Park, T. Okano, C. Nojiri, and S. W. Kim, "Heparin immobilization onto segmented polyurethaneurea surfaces-effect of hydrophilic spacers," Journal of Biomedical Materials Research, vol. 22, no. 11, pp. 977-992, 1988.
108. T. Okada and Y. Ikada, Makromolekulare Chemie, vol. 192, p. 1705, 1991.
109. S. M. Kirkham and M. E. Dangel, "The keratoprosthesis: improved biocompatability through design and surfacemodification," Ophthalmic Surgery, vol. 22, no. 8, pp. 455-461, 1991.
110. T. Okada and Y. Ikada, "Tissue reactions to subcutaneously implanted, surface-modified silicones," Journal of Biomedical Materials Research, vol. 27, no. 12, pp. 1509-1518, 1993. (Pubitemid 23341478)
111. Y. Kinoshita, T. Kuzuhara, M. Kirigakubo, M. Kobayashi, K. Shimura, and Y. Ikada, "Soft tissue reaction to collagen-immobilized porous polyethylene: subcutaneous implantation in rats for 20wk," Biomaterials, vol. 14, no. 3, pp. 209-215, 1993. (Pubitemid 23113786)
112. H. Mirzadeh, A. A. Katbab, and R. P. Burford, "CO2-pulsed laser induced surface grafting of acrylamide onto ethylene-propylene-rubber (EPR)-I," Radiation Physics and Chemistry, vol. 41, no. 3, pp. 507-519, 1993. (Pubitemid 23072039)
113. H. Mirzadeh, M. T. Khorasani, A. A. Katbab, et al., " Biocompatibility evaluation of laser-induced AAm and HEMA grafted EPR-part 1: in-vitro study," Clinical Materials, vol. 16, no. 4, pp. 177-187, 1994.
114. H.Mirzadeh, A. A. Katbab, M. T. Khorasani, R. P. Burford, E. Gorgin, and A. Golestani, "Cell attachment to laser-induced AAm- and HEMA-grafted ethylene-propylene rubber as biomaterial: in vivo study," Biomaterials, vol. 16, no. 8, pp. 641-648, 1995.
115. M. T. Khorasani, H. Mirzadeh, and P. G. Sammes, "Laser induced surface modification of polydimethylsiloxane as a super-hydrophobic material," Radiation Physics and Chemistry, vol. 47, no. 6, pp. 881-888, 1996.
116. H. Mirzadeh, M. Khorasani, and P. G. Sammes, "Laser surface modification of polymers. A novel technique for the preparation of blood compatible materials (II): in vitro assay," Iranian Polymer Journal, vol. 7, no. 1, pp. 5-13, 1998. (Pubitemid 128636151)
117. M. T. Korasani, H. Mirzadeh, and P. G. Sammes, in Surface Modification Technologies, T. Sudarshan, A. Khor, and M. Eandin, Eds., p. 499, Institute of Materials, London, UK, 1996.
118. M. T. Khorasani, H.Mirzadeh, and P. G. Sammes, "Laser surface modification of polymers to improve biocompatibility: HEMA grafted PDMS, in vitro assay-III," Radiation Physics and Chemistry, vol. 55, no. 5-6, pp. 685-689, 1999.
119. R. Lasson, Chemical constitution and biological properties of heparinized surface, Ph.D. thesis, Karolinska Institute, Stockholm, Sweden, 1980.
120. H. J. Steffen, J. Schmidt, and A. Gonzalez-Elipe, "Biocompatible surfaces by immobilization of heparin on diamond-like carbon films deposited on various substrates," Surface and Interface Analysis, vol. 29, no. 6, pp. 386-391, 2000.
121. Y. Susuki, M. Kasakabe, M. Iwaki, and M. Suzuki, Nuclear Instruments and Methods in Physics Research, vol. B32, p. 120, 1998.
122. Y. Susuki, C. Swapp, M. Kasakabe, and M. Iwaki, Nuclear Instruments and Methods in Physics Research, vol. B46, p. 354, 1990.
123. Y. Suzuki, M. Kusakabe, M. Iwaki, H. Akiba, K. Kusakabe, and S. Sato, "In vivo evaluation of antithrombogenicity for ion implanted silicone usineg in -111-tropolone-platelets," Japanese Journal of Artificial Organs, vol. 19, no. 3, pp. 1092-1095, 1990. (Pubitemid 20167692)
124. P. R. Udall, in Dialysis Therapy, A. R. Nilsen and R. N. Fine, Eds., Hanley & Belfus, Philadelphia, Pa, USA, 2nd edition, 1993.
125. J. Anderson, "The future of biomedical materials (key note)," in Proceedings of a Forecast of the Future for Biomaterials, Imperial Colleage, September 2005.
126. A. R. Boccaccini and J. J. Blaker, "Bioactive composite materials for tissue engineering scaffolds," Expert Review of Medical Devices, vol. 2, no. 3, pp. 303-317, 2005.
127. E. Eisenbarth, "Biomaterials for tissue engineering," Advanced Engineering Materials, vol. 9, no. 12, pp. 1051-1060, 2007.
128. M. M. Stevens, R. P. Marini, D. Schaefer, J. Aronson, R. Langer, and V. P. Shastri, "In vivo engineering of organs: the bone bioreactor," Proceedings of the National Academy of Sciences of the United States of America, vol. 102, no. 32, pp. 11450-11455, 2005. (Pubitemid 41153840)
129. C. Weinand, I. Pomerantseva, C. M. Neville, et al., "Hydrogel- β-TCP scaffolds and stem cells for tissue engineering bone," Bone, vol. 38, no. 4, pp. 555-563, 2006.
130. J. Jones, Materials Today, vol. 9, no. 12, p. 35, 2006.
131. H. J. Chung and T. G. Park, "Surface engineered and drug releasing pre-fabricated scaffolds for tissue engineering," Advanced Drug Delivery Reviews, vol. 59, no. 4-5, pp. 249-262, 2007.
132. G. Altankov, "Development of provisional extracellular matrix on the biomaterial interface: lessons from in vitro cell culture," in Proceedings of the NATO Advanced Research Workshop on Nanoengineered Systems for Regenerative Medicine, Varna, Bulgaria, September 2007.
133. M. J. Lydon, T. W. Minett, and B. J. Tighe, "Cellular interactions with synthetic polymer surfaces in culture," Biomaterials, vol. 6, no. 6, pp. 396-402, 1985.
134. K. Smetana Jr., "Cell biology of hydrogels," Biomaterials, vol. 14, no. 14, pp. 1046-1050, 1993.
135. H.-B. Lin, W. Sun, D. F. Mosher, et al., "Synthesis, surface, and cell-adhesion properties of polyurethanes containing covalently grafted RGD-peptides," Journal of Biomedical Materials Research, vol. 28, no. 3, pp. 329-342, 1994. (Pubitemid 24070726)
136. R. G. Flemming, C. J.Murphy, G. A. Abrams, S. L. Goodman, and P. F. Nealey, "Effects of synthetic micro- and nano-structured surfaces on cell behavior," Biomaterials, vol. 20, no. 6, pp. 573-588, 1999.
137. K. Saha, J. F. Pollock, D. V. Schaffer, and K. E. Healy, "Designing synthetic materials to control stem cell phenotype," Current Opinion in Chemical Biology, vol. 11, no. 4, pp. 381-387, 2007. (Pubitemid 47302843)
138. L. Moroni, J. A. A. Hendriks, R. Schotel, J. R. de Wijn, and C. A. van Blitterswijk, "Design of biphasic polymeric 3-dimensional fiber deposited scaffolds for cartilage tissue engineering applications," Tissue Engineering, vol. 13, no. 2, pp. 361-371, 2007.
139. D.-A. Wang, S. Varghese, B. Sharma, et al., "Multifunctional chondroitin sulphate for cartilage tissue-biomaterial integration," Nature Materials, vol. 6, no. 5, pp. 385-392, 2007. (Pubitemid 46693196)
140. H. Lee, S. M. Dellatore, W. M. Miller, and P. B. Messersmith, "Mussel-inspired surface chemistry formultifunctional coatings," Science, vol. 318, no. 5849, pp. 426-430, 2007. (Pubitemid 47614522)
141. D. S.W. Benoit, A. R. Durney, and K. S. Anseth, "The effect of heparin-functionalized PEG hydrogels on three-dimensional human mesenchymal stem cell osteogenic differentiation," Biomaterials, vol. 28, no. 1, pp. 66-77, 2007.
142. M. P. Ludolf and J. A. Hubbel, "Synthetic biomaterials as instructive extracellularmicroenvironments formorphogenesis in tissue engineering," Nature Biotechnology, vol. 25, pp. 47-55, 2007.
143. H. J. Chung and T. G. Park, "Surface engineered and drug releasing pre-fabricated scaffolds for tissue engineering," Advanced Drug Delivery Reviews, vol. 59, no. 4-5, pp. 249-262, 2007.
144. G. Altankov, T. Vladkova, N. Krasteva, A. Kostadinova, and I. Keranov, "Preparation of protein repellent PEI/PEG coatings and fibronectin reorganization study on the coated surfaces," Journal of the University of Chemical Technology and Metallurgy, vol. 44, no. 4, pp. 333-340, 2009.
145. G. Altankov and T. Groth, "Reorganization of substratum-bound fibronectin on hydrophilic and hydrophobic materials is related to biocompatibility," Journal of Materials Science, vol. 5, no. 9-10, pp. 732-737, 1994. (Pubitemid 24357971)
146. G. Altankov and T. Groth, "Fibronectin matrix formation by human fibroblasts on surfaces varying in wettability," Journal of Biomaterials Science, Polymer Edition, vol. 8, no. 4, pp. 299-310, 1996. (Pubitemid 27068066)
147. C. F. Amstein and P. A. Hartman, "Adaptation of plastic surfaces for tissue culture by glow discharge," Journal of Clinical Microbiology, vol. 2, no. 1, pp. 46-54, 1975.
148. G. N. Hannan and B. R. McAuslan, "Immobilized serotonin: a novel substrate for cell culture," Experimental Cell Research, vol. 171, no. 1, pp. 153-163, 1987.
149. J. A. Chinn, T. A. Horbett, B. D. Ratner, M. B. Schway, Y. Haque, and S. D. Hauschka, "Enhancement of serum fibronectin adsorption and the clonal plating efficiencies of Swiss mouse 3T3 fibroblast and MM14 mouse myoblast cells on polymer substrates modified by radiofrequency plasma deposition," Journal of Colloid and Interface Science, vol. 127, no. 1, pp. 67-87, 1989.
150. S.-D. Lee, G.-H. Hsiue, and C.-Y. Kao, "Preparation and characterization of a homobifunctional silicone rubber membrane grafted with acrylic acid via plasma-induced graft copolymerization," Journal of Polymer Science A, vol. 34, no. 1, pp. 141-148, 1996. (Pubitemid 126567545)
151. C. Satriano, E. Conte, and G. Marletta, "Surface chemical structure and cell adhesion onto ion beam modified polysiloxane," Langmuir, vol. 17, no. 7, pp. 2243-2250, 2001. (Pubitemid 35330164)
152. C. Satriano, S. Carnazza, S. Guglielmino, and G. Marletta, "Differential cultured fibroblast behavior on plasma and ion-beam-modified polysiloxane surfaces," Langmuir, vol. 18, no. 24, pp. 9469-9475, 2002. (Pubitemid 35458209)
153. T. Vladkova, I. Keranov, and G. Altankov, "Preparation and properties of PDMS surfaces grafted with acrylic acid via plasma pretment or ion-beam induced graft copolymerization," in Proceedings of the 4th International Conference on Chemical Societies of the South-Eastern European Countries (ICOSECS '04), Belgrad, Serbia, July 2004, A-P 26.
154. T. Vladkova, I. Keranov, P. Dineff, and G. Altankov, "Ionbeam assisted surface modification of PDMS," in Proceedings of the 18th Congres of Chemists and Technologiest of Macedonia, Ohrid, Macedonia, September 2004, PPM-16.
155. R. Hippler, S. Pfau, M. Schmidt, and K. Schönbach, Eds., Low Temperature Plasma Physics. Fundamental Aspects and Applications, Willey-VCH, Berlin, Germany, 2000.
156. T. G. Vladkova, I. L. Keranov, P. D. Dineff, et al., "Plasma based Ar+ beam assisted poly(dimethylsiloxane) surface modification," Nuclear Instruments and Methods in Physics Research B, vol. 236, no. 1-4, pp. 552-562, 2005.
157. I. Keranov, T. G. Vladkova, M. Minchev, A. Kostadinova, G. Altankov, and P. Dineff, "Topography characterization and initial cellular interaction of plasma-based ar1 beam-treated PDMS surfaces," Journal of Applied Polymer Science, vol. 111, no. 5, pp. 2637-2646, 2009.
158. J. M. Oliveira, I. B. Leonor, and R. L. Reis, "Preparation of bioactive coatings on the surface of bioinert polymers through an innovative auto-catalytic electroless route," Key Engineering Materials, vol. 284-286, pp. 203-206, 2005.
159. T. Kawai, C. Ohtsuki, M. Kamitakahara, et al., "A comparative study of apatite deposition on polyamide films containing different functional groups under a biomimetic condition," Journal of the Ceramic Society of Japan, vol. 113, no. 1321, pp. 588-592, 2005. (Pubitemid 41525343)
160. M. Morra, "Biomolecular modification of implant surfaces," Expert Review of Medical Devices, vol. 4, no. 3, pp. 361-372, 2007.
161. J. L. West, "Biofunctional polymers," in Encyclopedia of Biomaterials and Biomedical Engineering, pp. 89-95, 2007.
162. A. Denizli, E. Piskin, V. Dixit, M. Arthur, and G. Gitnick, "Collagen and fibronectin immobilization of PHEMAmicrocarriers for hepatocyte attachment," International Journal of Artificial Organs, vol. 18, no. 2, pp. 90-95, 1995.
163. S. Jaumotte-Thelen, I. Dozot-Dupont, J. Marchand-Brynaert, and Y.-J. Schneider, "Covalent grafting of fibronectin and asialofetuin at surface of
164. R. Chen and J. A.Hunt, "Biomimetic materials processing for tissue-engineering processes," Journal of Materials Chemistry, vol. 17, no. 38, pp. 3974-3979, 2007.
165. B. B. Hole, J. A. Schwarz, J. L. Gilbert, and B. L. Atkinson, "A study of biologically active peptide sequences (P-15) on the surface of an ABM scaffold (PepGen P-15) using AFM and FTIR," Journal of Biomedical Materials Research A, vol. 74, no. 4, pp. 712-721, 2005.
166. C. T. Laurencin and L. S. Nain, Eds., Nanotechnology and Tissue Engineering: The Scaffold, CRC Press, Boca Raton, Fla, USA, 2009.
167. C. R. Nuttelman, D. J. Mortisen, S. M. Henry, and K. S. Anseth, "Attachment of fibronectin to poly(vinyl alcohol) hydrogels promotes NIH3T3 cell adhesion, proliferation, and migration," Journal of Biomedical Materials Research, vol. 57, no. 2, pp. 217-223, 2001.
168. R. S. Braty, J. Crean, D. Lappin, and C. Godson, Journal of Biomedical Materials Research, vol. 56, pp. 78-82, 2001.
169. M. P. Lutolf and J. A. Hubbell, "Synthetic biomaterials as instructive extracellularmicroenvironments formorphogenesis in tissue engineering," Nature Biotechnology, vol. 23, no. 1, pp. 47-55, 2005.
170. U. Hersel, C. Dahmen, and H. Kessler, "RGD modified polymers: biomaterials for stimulated cell adhesion and beyond," Biomaterials, vol. 24, no. 24, pp. 4385-4415, 2003. (Pubitemid 36960136)
171. A. Karkhaneh, H. Mirzadeh, and A. R. Ghaffariyeh, "Two-step plasma surface modification of PDMS with mixture of HEMA and AAC: collagen immobilization and in vitro assays," in Proceedings of the 5th IASTED International Conference on Biomedical Engineering, pp. 433-438, Innsbruck, Austria, February 2007.
172. V. B. Ivanov, J. Behnisch, A. Hollander, F. Mehdorn, and H. Zimmermann, "Determination of functional groups on polymer surfaces using fluorescence labelling," Surface and Interface Analysis, vol. 24, no. 4, pp. 257-262, 1996. (Pubitemid 126603350)
173. J. Davies, C. S. Nunnerley, A. C. Brisley, et al., "Argon plasma treatment of polystyrene microtiter wells. Chemical and physical characterisation by contact angle, ToF-SIMS, XPS and STM," Colloids and Surfaces A, vol. 174, no. 3, pp. 287-295, 2000. (Pubitemid 30665706)
174. F. Poncin-Epaillard and G. Legeay, "Surface engineering of biomaterials with plasma techniques," Journal of Biomaterials Science, Polymer Edition, vol. 14, no. 10, pp. 1005-1028, 2003. (Pubitemid 37368823)
175. U. König, M. Nitschke, M. Pilz, F. Simon, C. Arnhold, and C. Werner, "Stability and ageing of plasma treated poly(tetrafluoroethylene) surfaces," Colloids and Surfaces B, vol. 25, no. 4, pp. 313-324, 2002. (Pubitemid 35351270)
176. J. Johns, Materials Today, vol. 11, no. 5, p. 29, 2008.
177. D. B. Haddow, D. A. Steele, R. D. Short, R. A. Dawson, and S. MacNeil, "Plasma-polymerized surfaces for culture of human keratinocytes and transfer of cells to an in vitro wound-bed model," Journal of Biomedical Materials Research A, vol. 64, no. 1, pp. 80-87, 2003. (Pubitemid 37521469)
178. B. Li, J. Chen, and J. H.-C. Wang, "RGD peptide-conjugated poly(dimethylsiloxane) promotes adhesion, proliferation, and collagen secretion of human fibroblasts," Journal of Biomedical Materials Research A, vol. 79, no. 4, pp. 989-998, 2006. (Pubitemid 44915918)
179. G. Sui, J. Wang, C.-C. Lee, et al., "Solution-phase surface modification in intact poly(dimethylsiloxane) microfluidic channels," Analytical Chemistry, vol. 78, no. 15, pp. 5543-5551, 2006. (Pubitemid 44182376)
180. Ch. Baquey, F. Palumbo, M. C. Porte-Durrieu, G. Legeay, A. Tressaud, and R. D'Agostino, "Plasma treatment of expanded PTFE offers a way to a biofunctionalization of its surface," Nuclear Instruments and Methods in Physics Research B, vol. 151, no. 1-4, pp. 255-262, 1999.
181. S. Sano and S. Wong, Chemistry of Protein Conjugation and Cross-Linking, CRC Press, Boca Raton, Fla, USA, 1991.
182. N. Shangguan, S. Katukojvala, R. Greenberg, and L. J. Williams, "The reaction of thio acids with azides: a new mechanism and new synthetic applications," Journal of the American Chemical Society, vol. 125, no. 26, pp. 7754-7755, 2003. (Pubitemid 36789754)
183. S. Drotleff, Polymers and protein-conjugates for tissue engineering, Ph.D. thesis, University of Regensburg, Regensburg, Germany, 2006.
184. T. Hermanson, Bioconjugate Techniques, Academic Press, San Diego, Calif, USA, 1996.
185. Y. W. Tong and M. S. Shoichet, "Peptide surface modification of poly(tetrafluoroethylene-co-hexafluoropropylene) enhances its interaction with central nervous system neurons," Journal of Biomedical Materials Research, vol. 42, no. 1, pp. 85-95, 1998.
186. S. P. Massia and J. A. Hubbell, "Human endothelial cell interactions with surface-coupled adhesion peptides on a nonadhesive glass substrate and two polymeric biomaterials," Journal of Biomedical Materials Research, vol. 25, no. 2, pp. 223-242, 1991.
187. S. P. Massia and J. A. Hubbell, "Covalently attached GRGD on polymer surfaces promotes biospecific adhesion of mammalian cells," Annals of the New York Academy of Sciences, vol. 589, pp. 261-270, 1990.
188. K. Nilsson and K.Mosbach, "Immobilization of enzymes and affinity ligands to various hydroxyl group carrying supports using highly reactive sulfonyl chlorides," Biochemical and Biophysical Research Communications, vol. 102, no. 1, pp. 449-457, 1981.
189. K. Nilsson and K. Mosbach, "Tresyl chloride-activated supports for enzyme immobilization," Methods in Enzymology, vol. 135, pp. 65-78, 1987.
190. K. Nilsson and K. Mosbach, "Immobilization of ligands with organic sulfonyl chlorides," Methods in Enzymology, vol. 104, pp. 56-69, 1984. (Pubitemid 14159510)
191. R. Benters, C. M. Niemeyer, and D. Whorle, "Dendrimer-activated solid supports for nucleic acid and proteinmicroarrays," ChemBioChem, vol. 2, no. 9, pp. 686-694, 2001. (Pubitemid 33722620)
192. M. Yang, R. Y. C. Kong, N. Kazmi, and A. K. C. Leung, "Covalent immobilization of oligonucleotides on modified glass/silicon surfaces for solid-phase DNA hybridization and amplification," Chemistry Letters, no. 3, pp. 257-258, 1998.
193. S. P. Pack, N. K. Kamisetty, M. Nonogawa, et al., "Direct immobilization of DNA oligomers onto the amine-functionalized glass surface for DNA microarray fabrication through the activation-free reaction of oxanine," Nucleic Acids Research, vol. 35, no. 17, 2007.
194. A. Dekker, et al., "Improved adhesion and proliferation of human endothelial cells on PE pre-coated with monoclonal antibodies directed against cell membrane antigens and extracellularmatrix proteins," in Adhesion and Proliferation of Human Endothelial Cells on Polymeric Surfaces, Optimization Studies, pp. 61-85, 1990.
195. R. K. O'Reilly, M. J. Joralemon, C. J. Hawker, and K. L. Wooley, "Facile syntheses of surface-functionalized micelles and shell cross-linked nanoparticles," Journal of Polymer Science A, vol. 44, no. 17, pp. 5203-5217, 2006.
196. K. K. Perkin, J. L. Turner, K. L. Wooley, and S. Mann, "Fabrication of hybrid nanocapsules by calcium phosphate mineralization of shell cross-linked polymer micelles and nanocages," Nano Letters, vol. 5, no. 7, pp. 1457-1461, 2005. (Pubitemid 41084435)
197. M. L. Becker, L. A. O. Bailey, and K. L. Wooley, "Peptide- derivatized shell-cross-linked nanoparticles. 2. Biocompatibility evaluation," Bioconjugate Chemistry, vol. 15, no. 4, pp. 710-717, 2004.
198. M. L. Becker, J. Liu, and K. L. Wooley, "Peptide-polymer bioconjugates: hybrid block copolymers generated via living radical polymerizations from resin-supported peptides," Chemical Communications, vol. 9, no. 2, pp. 180-181, 2003. (Pubitemid 36132011)
199. J. Riesle, A. P. Hollander, R. Langer, L. E. Freed, and G. Vunjak-Novakovic, "Collagen in tissue-engineered cartilage: types, structure, and crosslinks," Journal of Cellular Biochemistry, vol. 71, no. 3, pp. 313-327, 1998. (Pubitemid 28516323)
200. J. Yang, Y.Wan, J. Yang, J. Bei, and S.Wang, "Plasma-treated, collagen-anchored polylactone: its cell affinity evaluation under shear or shear-free conditions," Journal of Biomedical Materials Research A, vol. 67, no. 4, pp. 1139-1147, 2003. (Pubitemid 37522726)
201. Z. Ma, C. Gao, Y. Gong, and J. Shen, "Cartilage tissue engineering PLLA sca ffold with surface immobilized collagen and basic fibroblast growth factor," Biomaterials, vol. 26, no. 11, pp. 1253-1259, 2005. (Pubitemid 39314499)
202. S. Ber, G. Torun Köse, and V. Hasirci, "Bone tissue engineering on patterned collagen films: an in vitro study," Biomaterials, vol. 26, no. 14, pp. 1977-1986, 2005. (Pubitemid 39575340)
203. D. L. Wilson, R. Martin, S. Hong, M. Cronin-Golomb, C. A. Mirkin, and D. L. Kaplan, "Surface organization and nanopatterning of collagen by dip-pen nanolithography," Proceedings of the National Academy of Sciences of the United States of America, vol. 98, no. 24, pp. 13660-13664, 2001. (Pubitemid 33115954)
204. I. Keranov, T. Vladkova, M. Minchev, A. Kostadinova, and G. Altankov, "Preparation, characterization, and cellular interactions of collagen-immobilized PDMS surfaces," Journal of Applied Polymer Science, vol. 110, no. 1, pp. 321-330, 2008.
205. X. Liu, Y. Won, and P. X. Ma, "Surface modification of interconnected porous scaffolds," Journal of Biomedical Materials Research A, vol. 74, no. 1, pp. 84-91, 2005. (Pubitemid 41099253)
206. T. Serizawa andM. Akashi, "A novel approach for fabricating ultrathin polymer films by the repetition of the adsorption/drying processes," Journal of Polymer Science A, vol. 37, no. 13, pp. 1903-1906, 1999.
207. Z. Ma, C. Gao, Y. Gong, and J. Shen, "Cartilage tissue engineering PLLA scaffold with surface immobilized collagen and basic fibroblast growth factor," Biomaterials, vol. 26, no. 11, pp. 1253-1259, 2005. (Pubitemid 39314499)
208. M.-C. Chen, H.-F. Liang, Y.-L. Chiu, Y. Chang, H.-J.Wei, and H.-W. Sung, "A novel drug-eluting stent spray-coated with multi-layers of collagen and sirolimus," Journal of Controlled Release, vol. 108, no. 1, pp. 178-189, 2005. (Pubitemid 41476685)
209. X. Wang, H. J. Kim, P. Xu, A. Matsumoto, and D. L. Kaplan, "Biomaterial coatings by stepwise deposition of silk fibroin," Langmuir, vol. 21, no. 24, pp. 11335-11341, 2005. (Pubitemid 41775099)
210. K. Cai, K. Yao, S. Lin, et al., "Poly(D,L-lactic acid) surfaces modified by silk fibroin: effects on the culture of osteoblast in vitro," Biomaterials, vol. 23, no. 4, pp. 1153-1160, 2002. (Pubitemid 33109047)
211. A. Chiarini, P. Petrini, S. Bozzini, I. Dal Pra, and U. Armato, "Silk fibroin/poly(carbonate)-urethane as a substrate for cell growth: in vitro interactions with human cells," Biomaterials, vol. 24, no. 5, pp. 789-799, 2003. (Pubitemid 35449831)
212. I. Dal Pra, P. Petrini, A. Charini, S. Bozzini, S. Farè, and U. Armato, "Silk fibroin-coated three-dimensional polyurethane scaffolds for tissue engineering: interactions with normal human fibroblasts," Tissue Engineering, vol. 9, no. 6, pp. 1113-1121, 2003. (Pubitemid 37467659)
213. P. Petrini, C. Parolari, and M. C. Tanzi, "Silk fibro-inpolyurethane scaffolds for tissue engineering," Journal of Materials Science, vol. 12, no. 10-12, pp. 849-853, 2001. (Pubitemid 34062101)
214. G. H. Altman, R. L. Horan, H. H. Lu, et al., "Silk matrix for tissue engineered anterior cruciate ligaments," Biomaterials, vol. 23, no. 20, pp. 4131-4141, 2002.
215. G. H. Altman, H. H. Lu, R. L. Horan, et al., "Advanced bioreactor with controlled application of multi-dimensional strain for tissue engineering," Journal of Biomechanical Engineering, vol. 124, no. 6, pp. 742-749, 2002.
216. J. S. Mao, H. F. Liu, Y. J. Yin, and K. D. Yao, "The properties of chitosan-gelatin membranes and scaffolds modified with hyaluronic acid by different methods," Biomaterials, vol. 24, no. 9, pp. 1621-1629, 2003.
217. H. S. Yoo, E. A. Lee, J. J. Yoon, and T. G. Park, "Hyaluronic acid modified biodegradable scaffolds for cartilage tissue engineering," Biomaterials, vol. 26, no. 14, pp. 1925-1933, 2005.
218. S. R. Hong, Y. M. Lee, and T. Akaike, "Evaluation of a galactose-carrying gelatin sponge for hepatocytes culture and transplantation," Journal of Biomedical Materials Research A, vol. 67, no. 3, pp. 733-741, 2003. (Pubitemid 37521546)
219. T. G. Park, "Perfusion culture of hepatocytes within galactose-derivatized biodegradable poly(lactide-coglycolide) scaffolds prepared by gas foaming of effervescent salts," Journal of Biomedical Materials Research, vol. 59, no. 1, pp. 127-135, 2002.
220. M. P. Lutolf and J. A. Hubbell, "Synthetic biomaterials as instructive extracellularmicroenvironments formorphogenesis in tissue engineering," Nature Biotechnology, vol. 23, no. 1, pp. 47-55, 2005.
221. U. Hersel, C. Dahmen, and H. Kessler, "RGD modified polymers: biomaterials for stimulated cell adhesion and beyond," Biomaterials, vol. 24, no. 24, pp. 4385-4415, 2003. (Pubitemid 36960136)
222. E. Ruoslahti, "RGD and other recognition sequences for integrins," Annual Review of Cell and Developmental Biology, vol. 12, pp. 697-715, 1996. (Pubitemid 26422728)
223. T. G. Kim and T. G. Park, "Biomimicking extracellular matrix: cell adhesive RGD peptide modified electrospun poly(D,L-lactic-co-glycolic acid) nanofiber mesh," Tissue Engineering, vol. 12, no. 2, pp. 221-233, 2006.
224. H. S. Mansur, Z. P. Lobato, R. L. Oréfice, W. L. Vasconcelos, C. Oliveira, and L. J. Machado, "Surface functionalization of porous glass networks: effects on bovine serum albumin and porcine insulin immobilization," Biomacromolecules, vol. 1, no. 4, pp. 789-797, 2000.
225. R. F. S. Lenza, J. R. Jones, W. L. Vasconcelos, and L. L. Hench, "In vitro release kinetics of proteins from bioactive foams," Journal of Biomedical Materials Research A, vol. 67, no. 1, pp. 121-129, 2003.
226. E. Ruoslahti, "RGD and other recognition sequences for integrins," Annual Review of Cell and Developmental Biology, vol. 12, pp. 697-715, 1996. (Pubitemid 26422728)
227. J. L.Myles, B. T. Burgess, and R. B. Dickinson, "Modification of the adhesive properties of collagen by covalent grafting with RGD peptides," Journal of Biomaterials Science, Polymer Edition, vol. 11, no. 1, pp. 69-86, 2000.
228. J. C. Schense, J. Bloch, P. Aebischer, and J. A. Hubbell, "Enzymatic incorporation of bioactive peptides into fibrin matrices enhances neurite extension," Nature Biotechnology, vol. 18, no. 4, pp. 415-419, 2000. (Pubitemid 30217529)
229. S. P. Massia and J. A. Hubbell, "Human endothelial cell interactions with surface-coupled adhesion peptides on a nonadhesive glass substrate and two polymeric biomaterials," Journal of Biomedical Materials Research, vol. 25, no. 2, pp. 223-242, 1991.
230. M. J. Humphries, "The molecular basis and specificity of integrin-ligand interactions," Journal of Cell Science, vol. 97, no. 4, pp. 585-592, 1990.
231. S. P.Massia and J. A. Hubbell, Journal of Biomedical Materials Research, vol. 25, pp. 249-252, 1991.
232. B. K. Brandley and R. L. Schnaar, "Covalent attachment of an Arg-Gly-Asp sequence peptide to derivatizable polyacrylamide surfaces: support of fibroblast adhesion and longterm growth," Analytical Biochemistry, vol. 172, no. 1, pp. 270-278, 1988.
233. H.-B. Lin, W. Sun, D. F. Mosher, et al., "Synthesis, surface, and cell-adhesion properties of polyurethanes containing covalently grafted RGD-peptides," Journal of Biomedical Materials Research, vol. 28, no. 3, pp. 329-342, 1994. (Pubitemid 24070726)
234. H.-B. Lin, Z. C. Zhao, C. Garcia-Echeverria, D. H. Rich, and S. L. Cooper, "Synthesis of a novel polyurethane co-polymer containing covalently attached RGD peptide," Journal of Biomaterials Science, Polymer Edition, vol. 3, no. 3, pp. 217-227, 1992.
235. P. D. Drumheller, D. L. Elbert, and J. A. Hubbell, "Multifunctional poly(ethylene glycol) semi-interpenetrating polymer networks as highly selective adhesive substrates for bioadhesive peptide grafting," Biotechnology and Bioengineering, vol. 43, no. 8, pp. 772-780, 1994.
236. H.-B. Lin, W. Sun, D. F. Mosher, et al., "Synthesis, surface, and cell-adhesion properties of polyurethanes containing covalently grafted RGD-peptides," Journal of Biomedical Materials Research, vol. 28, no. 3, pp. 329-342, 1994. (Pubitemid 24070726)
237. S. P.Massia and J. A. Hubbell, Journal of Biomedical Materials Research, vol. 25, pp. 273-282, 1991.
238. P. D. Drumheller, D. L. Elbert, and J. A. Hubbell, "Multifunctional poly(ethylene glycol) semi-interpenetrating polymer networks as highly selective adhesive substrates for bioadhesive peptide grafting," Biotechnology and Bioengineering, vol. 43, no. 8, pp. 772-780, 1994.
239. J. Chen, G. H. Altman, V. Karageorgiou, et al., "Human bone marrow stromal cell and ligament fibroblast responses on RGD-modified silk fibers," Journal of Biomedical Materials Research A, vol. 67, no. 2, pp. 559-570, 2003. (Pubitemid 37522463)
240. Y.-S. Lin, S.-S. Wang, T.-W. Chung, et al., "Growth of endothelial cells on different concentrations of Gly-Arg-Gly-Asp photochemically grafted in polyethylene glycol modified polyurethane," Artificial Organs, vol. 25, no. 8, pp. 617-621, 2001. (Pubitemid 32823017)
241. L. De Bartolo, S. Morelli, A. Piscioneri, et al., "Novel membranes and surface modification able to activate specific cellular responses," Biomolecular Engineering, vol. 24, no. 1, pp. 23-26, 2007. (Pubitemid 46216156)
242. S. S. Lateef, S. Boateng, T. J. Hartman, C. A. Crot, B. Russell, and L. Hanley, "GRGDSP peptide-bound silicone membranes withstand mechanical flexing in vitro and display enhanced fibroblast adhesion," Biomaterials, vol. 23, no. 15, pp. 3159-3168, 2002. (Pubitemid 34522129)
243. Y. Hu, S. R. Winn, I. Krajbich, and J. O. Hollinger, "Porous polymer scaffolds surface-modified with arginine-glycineaspartic acid enhance bone cell attachment and differentiation in vitro," Journal of BiomedicalMaterials Research A, vol. 64, no. 3, pp. 583-590, 2003. (Pubitemid 37522499)
244. M.-H. Ho, L.-T. Hou, C.-Y. Tu, et al., "Promotion of cell affinity of porous PLLA scaffolds by immobilization of RGD peptides via plasma treatment," Macromolecular Bioscience, vol. 6, no. 1, pp. 90-98, 2006. (Pubitemid 43082695)
245. D. S. W. Benoit and K. S. Anseth, "The effect on osteoblast function of colocalized RGD and PHSRN epitopes on PEG surfaces," Biomaterials, vol. 26, no. 25, pp. 5209-5220, 2005.
246. D. L. Elbert and J. A. Hubbell, "Surface treatments of polymers for biocompatibility," Annual Review of Materials Science, vol. 26, no. 1, pp. 365-394, 1996.
247. J. P. Tam, Q. Yu, and Z.Miao, "Orthogonal ligation strategies for peptide and protein," Biopolymers, vol. 51, no. 5, pp. 311-332, 1999. (Pubitemid 30117292)
248. J. A. Camarero, Y. Kwon, and M. A. Coleman, "Chemoselective attachment of biologically active proteins to surfaces by expressed protein ligation and its application for "protein chip" fabrication," Journal of the American Chemical Society, vol. 126, no. 45, pp. 14730-14731, 2004. (Pubitemid 39532148)
249. G. Thumshirn, U. Hersel, S. L. Goodman, and H. Kessler, "Multimeric cyclic RGD peptides as potential tools for tumor targeting: solid-phase peptide synthesis and chemoselective oxime ligation," Chemistry, vol. 9, no. 12, pp. 2717-2725, 2003.
250. L. Scheibler, P. Dumy, M. Boncheva, et al., "Functional molecular thin films: topological templates for the chemoselective ligation of antigenic peptides to self-assembled monolayers," Angewandte Chemie: International Edition, vol. 38, no. 5, pp. 696-699, 1999. (Pubitemid 29129837)
251. S. P. Massia and J. A. Hubbell, "Immobilized amines and basic amino acids as mimetic heparin-binding domains for cell surface proteoglycan-mediated adhesion," Journal of Biological Chemistry, vol. 267, no. 14, pp. 10133-10141, 1992.
252. W.-J. Li, R. Tuli, X. Huang, P. Laquerriere, and R. S. Tuan, "Multilineage differentiation of human mesenchymal stem cells in a three-dimensional nanofibrous scaffold," Biomaterials, vol. 26, no. 25, pp. 5158-5166, 2005. (Pubitemid 40387839)
253. W.-J. Li, C. T. Laurencin, E. J. Caterson, R. S. Tuan, and F. K. Ko, "Electrospun nanofibrous structure: a novel scaffold for tissue engineering," Journal of Biomedical Materials Research, vol. 60, no. 4, pp. 613-621, 2002. (Pubitemid 34492600)
254. A.Mata, C. Boehm, A. J. Fleischman, G.Muschler, and S. Roy, "Analysis of connective tissue progenitor cell behavior on polydimethylsiloxane smooth and channel micro-textures," Biomedical Microdevices, vol. 4, no. 4, pp. 267-275, 2002. (Pubitemid 36004217)
255. G. Assero, C. Satriano, G. Lupo, C. D. Anfuso, G. Marletta, and M. Alberghina, "Pericyte adhesion and growth onto polyhydroxymethylsiloxane surfaces nanostructured by plasma treatment and ion irradiation," Microvascular Research, vol. 68, no. 3, pp. 209-220, 2004. (Pubitemid 40288117)
256. R. Raman, G. Venkataraman, S. Ernst, V. Sasisekharan, and R. Sasisekharan, "Structural specificity of heparin binding in the fibroblast growth factor family of proteins," Proceedings of the National Academy of Sciences of the United States of America, vol. 100, no. 5, pp. 2357-2362, 2003. (Pubitemid 36297503)
257. M. J. B. Wissink, R. Beernink, A. A. Poot, et al., "Improved endothelialization of vascular grafts by local release of growth factor from heparinized collagen matrices," Journal of Controlled Release, vol. 64, no. 1-3, pp. 103-114, 2000. (Pubitemid 30035311)
258. J. S. Pieper, T. Hafmans, P. B. Van Wachem, et al., "Loading of collagen-heparan sulfate matrices with bFGF promotes angiogenesis and tissue generation in rats," Journal of Biomedical Materials Research, vol. 62, no. 2, pp. 185-194, 2002. (Pubitemid 34988495)
259. S. E. Sakiyama-Elbert and J. A. Hubbell, "Development of fibrin derivatives for controlled release of heparin-binding growth factors," Journal of Controlled Release, vol. 65, no. 3, pp. 389-402, 2000.
260. J. Li, J. Pan, L. Zhang, X. Guo, and Y. Yu, "Culture of primary rat hepatocytes within porous chitosan scaffolds," Journal of Biomedical Materials Research A, vol. 67, no. 3, pp. 938-943, 2003. (Pubitemid 37521568)
261. A. T. Gutsche, H. Lo, J. Zurlo, J. Yager, and K. W. Leong, "Engineering of a sugar-derivatized porous network for hepatocyte culture," Biomaterials, vol. 17, no. 3, pp. 387-393, 1996. (Pubitemid 26031393)
262. J. J. Yoon, H. J. Chung, H. J. Lee, and T. G. Park, "Heparin- immobilized biodegradable scaffolds for local and sustained release of angiogenic growth factor," Journal of Biomedical Materials Research A, vol. 79, no. 4, pp. 934-942, 2006.
263. H. J. Chung, H. K. Kim, J. J. Yoon, and T. G. Park, "Heparin immobilized porous PLGA microspheres for angiogenic growth factor delivery," Pharmaceutical Research, vol. 23, no. 8, pp. 1835-1841, 2006.
264. D. D. Hile, M. L. Amirpour, A. Akgerman, and M. V. Pishko, "Active growth factor delivery from poly(D,L-lactide-co- glycolide) foams prepared in supercritical CO2," Journal of Controlled Release, vol. 66, no. 2-3, pp. 177-185, 2000. (Pubitemid 30160855)
265. H. Lee, R. A. Cusick, F. Browne, et al., "Local delivery of basic fibroblast growth factor increases both angiogenesis and engraftment of hepatocytes in tissue-engineered polymer devices," Transplantation, vol. 73, no. 10, pp. 1589-1593, 2002. (Pubitemid 34568670)
266. R. Padera, G. Venkataraman, D. Berry, R. Godavarti, and R. Sasisekharan, "FGF-2/fibroblast growth factor receptor/heparin-like glycosaminoglycan interactions: a compensation model for FGF-2 signaling," FASEB Journal, vol. 13, no. 13, pp. 1677-1687, 1999. (Pubitemid 29473330)
267. L. D. Thompson, M. Pantoliano, and B. Springer, "Energetic characterization of the basic fibroblast growth factor-heparin interaction: identification of the heparin binding domain," Biochemistry, vol. 33, no. 13, pp. 3831-3840, 1994. (Pubitemid 24125344)
268. R. Raman, G. Venkataraman, S. Ernst, V. Sasisekharan, and R. Sasisekharan, "Structural specificity of heparin binding in the fibroblast growth factor family of proteins," Proceedings of the National Academy of Sciences of the United States of America, vol. 100, no. 5, pp. 2357-2362, 2003. (Pubitemid 36297503)
269. J. J. Yoon, H. J. Chung, H. J. Lee, and T. G. Park, "Heparin- immobilized biodegradable scaffolds for local and sustained release of angiogenic growth factor," Journal of Biomedical Materials Research A, vol. 79, no. 4, pp. 934-942, 2006.
270. H. K. Kim, H. J. Chung, and T. G. Park, "Biodegradable polymeric microspheres with "open/closed" pores for sustained release of human growth hormone," Journal of Controlled Release, vol. 112, no. 2, pp. 167-174, 2006.
271. H. Lee, H. J. Chung, and T. G. Park, "Perspectives on: local and sustained delivery of angiogenic growth factors," Journal of Bioactive and Compatible Polymers, vol. 22, no. 1, pp. 89-114, 2007. (Pubitemid 44927135)
272. C. P. Vepari and D. L. Kaplan, "Covalently immobilized enzyme gradients within three-dimensional porous scaffolds," Biotechnology and Bioengineering, vol. 93, no. 6, pp. 1130-1137, 2006.
273. M. Wang, "Surface modification of biomaterials and tissue engineering scaffolds for enhanced osteoconductivity," in Proceedings of the 3rd Kuala Lumpur International Conference on Biomedical Engineering, vol. 15, pp. 22-27, Kuala Lumpur, Malaysia, December 2006.
274. Z. Hu, Y. Chen, C. Wang, Y. Zheng, and Y. Li, "Polymer gels with engineered environmentally responsive surface patterns," Nature, vol. 393, no. 6681, pp. 149-152, 1998. (Pubitemid 28242250)
275. M. Ebara, J. M. Hoffman, A. S. Hoffman, and P. S. Stayton, "Switchable surface traps for injectable bead-based chromatography in PDMS microfluidic channels," Lab on a Chip, vol. 6, no. 7, pp. 843-848, 2006. (Pubitemid 43962790)
276. F. Stoica, C. Alexander, N. Tirelli, A. F. Miller, and A. Saiani, "Selective synthesis of double temperature-sensitive polymer-peptide conjugates," Chemical Communications, no. 37, pp. 4433-4435, 2008.