The effect of nanoparticles on the real area of contact, friction, and wear

Journal of Tribology

Volumn 135, Issue 4, 2013, Pages

  Ghaednia, Hamed ^a   Jackson, Robert L ^a  

^a AUBURN UNIVERSITY   (United States)

Author keywords

Nanolubricant; Nanoparticle; Particulate lubricants; Real area of contact; Third body modeling and simulations

Indexed keywords

COMPUTER SIMULATION; FRICTION; LUBRICANTS; PARTICLE SIZE; SURFACE MEASUREMENT;

COEFFICIENT OF FRICTIONS; FUNDAMENTAL MODELS; NANO-SIZED PARTICLES; NANOLUBRICANT; NOVEL METHODOLOGY; REAL AREA OF CONTACT; SILICON NANOPARTICLES; THIRD-BODY MODELS;

NANOPARTICLES;

EID: 84897374516     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.4024297     Document Type: Article

References (59)

1. Szlufarska, I., Chandross, M., and Carpick, R. W., 2008, "Recent Advances in Single-Asperity Nanotribology," J. Phys. D: Appl. Phys., 41(12), p. 123001.
2. Bhushan, B., Israelachvili, J. N., and Landman, U., 1995, "Nanotribology: Friction, Wear and Lubrication at the Atomic Scale," Nature, 374(6523), pp. 607-616.
3. Harrison, J. A., Colton, R. J., White, C. T., and Brenner, D. W., 1993, "Effect of Atomic-Scale Surface Roughness on Friction: A Molecular Dynamics Study of Diamond Surfaces," Wear, 168(1-2), pp. 127-133.
4. Zhang, L., and Tanaka, H., 1998, "Atomic Scale Deformation in Silicon Monocrystals Induced by Two-Body and Three-Body Contact Sliding," Tribol. Int., 31(8), pp. 425-433. (Pubitemid 128790469)
5. Chantrenne, P., Raynaud, M., Clapp, P. C., Rifkin, J., and Becquart, C. S., 2000, "Molecular Dynamics Simulations of Friction," Heat Technol., 18(Suppl. 1), pp. 49-56.
6. Landman, U., Luedtke, W. D., and Ringer, E. M., 1992, "Atomistic Mechanisms of Adhesive Contact Formation and Interfacial Processes," Wear, 153(1), pp. 3-30.
7. Deneen Nowak, J., Mook, W. M., Minor, A. M., Gerberich, W. W., and Carter, C. B., 2007, "Fracturing a Nanoparticle," Philos. Mag., 87(1), pp. 29-37. (Pubitemid 44836068)
8. Mook, W. M., Nowak, J. D., Perrey, C. R., Carter, C. B., Mukherjee, R., Girshick, S. L., Mcmurry, P. H., and Gerberich, W. W., 2007, "Compressive Stress Effects on Nanoparticle Modulus and Fracture," Phys. Rev. B, 75(21), p. 214112.
9. Shan, Z. W., Adesso, G., Cabot, A., Sherburne, M. P., Syed Asif, S. A., Warren, O. L., Chrzan, D. C., Minor, A. M., and Alivisatos, A. P., 2008, "Ultrahigh Stress and Strain in Hierarchically Structured Hollow Nanoparticles," Nature Mater., 7(12), pp. 947-952.
10. Gerberich, W. W., Michler, J., Mook, W. M., Ghisleni, R., Östlund, F., Stauffer, D. D., and Ballarini, R., 2009, "Scale Effects for Strength, Ductility, and Toughness in 'Brittle' Materials," J. Mater. Res., 24(3), pp. 898-906.
11. Lockwood, A. J., and Inkson, B. J., 2009, "In Situ Tem Nanoindentation and Deformation of Si-Nanoparticle Clusters," J. Phys. D: Appl. Phys., 42(3), p. 035410.
12. Mook, W. M., Niederberger, C., Bechelany, M., Philippe, L., and Michler, J., 2010, "Compression of Freestanding Gold Nanostructures: From Stochastic Yield to Predictable Flow," Nanotechnology, 21(5), p. 055701.
13. Nowak, J. D., Beaber, A. R., Ugurlu, O., Girshick, S. L., and Gerberich, W. W., 2010, "Small Size Strength Dependence on Dislocation Nucleation," Scr. Mater., 62(11), pp. 819-822.
14. Lahouij, I., Dassenoy, F., De Knoop, L., Martin, J.-M., and Vacher, B., 2011, "In Situ Tem Observation of the Behavior of an Individual Fullerene-Like Mos2 Nanoparticle in a Dynamic Contact," Tribol. Lett., 42(2), pp. 133-140.
15. Zhang, N., Deng, Q. A., Hong, Y., Xiong, L. M., Li, S., Strasberg, M., Yin, W. Q., Zou, Y. J., Taylor, C. R., Sawyer, G., and Chen, Y. P., 2011, "DeformationMechanisms in Silicon Nanoparticles," J. Appl. Phys., 109(6), p. 063534.
16. Deneen, J., Mook, W. M., Minor, A., Gerberich, W. W., and Barry Carter, C., 2006, "In Situ Deformation of Silicon Nanospheres," J. Mater. Sci., 41(14), pp. 4477-4483. (Pubitemid 44226127)
17. Xu, T., Jiazheng, Z., and Kang, X., 1996, "The Ball-Bearing Effect of Diamond Nanoparticles as an Oil Additive," J. Phys. D: Appl. Phys., 29(11), pp. 2932-2937. (Pubitemid 126544623)
18. Zhou, J., Wu, Z., Zhang, Z., Liu, W., and Xue, Q., 2000, "Tribological Behavior and Lubricating Mechanism of Cu Nanoparticles in Oil," Tribol. Lett., 8(4), pp. 213-218. (Pubitemid 32369135)
19. Rapoport, L., Leshchinsky, V., Lapsker, I., Volovik, Y., Nepomnyashchy, O., Lvovsky, M., Popovitz-Biro, R., Feldman, Y., and Tenne, R., 2003, "Tribological Properties of WS2 Nanoparticles Under Mixed Lubrication," Wear, 255(7-12), pp. 785-793. (Pubitemid 37002322)
20. Sajith, V., Mohiddeen, M., Sajanish, M. B., and Sobhan, C. B., 2007, "An Investigation of the Effect of Addition of Nanoparticles on the Properties of Lubricating Oil," ASME Conf. Proc., 2, pp. 329-335.
21. Wu, Y. Y., Tsui, W. C., and Liu, T. C., 2007, "Experimental Analysis of Tribological Properties of Lubricating Oils with Nanoparticle Additives," Wear, 262(7-8), pp. 819-825.
22. Hernández Battez, A., González, R., Viesca, J. L., Fernández, J. E., Díaz Fernández, J. M., Machado, A., Chou, R., and Riba, J., 2008, "CuO, ZrO2 and ZnO Nanoparticles as Antiwear Additive in Oil Lubricants," Wear, 265(3-4), pp. 422-428.
23. Gu, C. X., Zhu, G. J., Li, L., Tian, X. Y., and Zhu, G. Y., 2009, "Tribological Effects of Oxide Based Nanoparticles in Lubricating Oils," J. Mar. Sci. Appl., 8(1), pp. 71-76.
24. Zhang, M., Wang, X., Fu, X., and Xia, Y., 2009, "Performance and Anti-Wear Mechanism of CaCO3 Nanoparticles as a Green Additive in Poly-Alpha-Olefin," Tribol. Int., 42(7), pp. 1029-1039.
25. Zhang, M., Wang, X., Liu, W., and Fu, X., 2009, "Performance and Anti-Wear Mechanism of Cu Nanoparticles as Lubricating Oil Additives," Ind. Lubr. Tribol., 61(6), pp. 311-318.
26. Hernández Battez, A., Viesca, J. L., González, R., Blanco, D., Asedegbega, E., and Osorio, A., 2010, "Friction Reduction Properties of a CuO Nanolubricant Used as Lubricant for a NiCrBSi Coating," Wear, 268(1-2), pp. 325-328.
27. Tarasov, S., Kolubaev, A., Belyaev, S., Lerner, M., and Tepper, F., 2002, "Study of Friction Reduction by Nanocopper Additives to Motor Oil," Wear, 252(1-2), pp. 63-69. (Pubitemid 34122602)
28. Zhao, Y., Zhang, Z., and Dang, H., 2003, "A Novel Solution Route for Preparing Indium Nanoparticles," J. Phys. Chem. B, 107(31), pp. 7574-7576.
29. Greenberg, R., Halperin, G., Etsion, I., and Tenne, R., 2004, "The Effect of WS 2 Nanoparticles on Friction Reduction in Various Lubrication Regimes," Tribol. Lett., 17(2), pp. 179-186. (Pubitemid 38865465)
30. Zhao, Y., Zhang, Z., and Dang, H., 2004, "Synthesis of In-Sn Alloy Nanoparticles by a Solution Dispersion Method," J. Mater. Chem., 14(3), pp. 299-302.
31. Martin, J. M., and Ohmae, N., 2008, Nanolubricants, Tribology Series, Wiley, New York.
32. Ghaednia, H., Jackson, R. L., and Khodadadi, J. M., 2013, "Experimental Analysis of Stable CuO Nanoparticle Enhanced Lubricants," J. Exp. Nanosci., pp. 1-18.
33. Poon, C. Y., and Bhushan, B., 1996, "Nano-Asperity Contact Analysis and Surface Optimization for Magnetic Head Slider/Disk Contact," Wear, 202(1), pp. 83-98.
34. Adams, G. G., Müftü, S., and Azhar, N. M., 2003, "A Scale-Dependent Model for Multi-Asperity Contact and Friction," ASME J. Tribol., 125, pp. 700-708. (Pubitemid 37353872)
35. Adams, G. G., and Muftu, S., 2005, "Improvements to a Scale-Dependent Model for Contact and Friction," J. Phys. D: Appl. Phys., 38(9), pp. 1402-1409. (Pubitemid 41237272)
36. Almeida, L., Ramadoss, R., Jackson, R., Ishikawa, K., and Yu, Q., 2007, "Laterally Actuated Multicontact Mems Relay Fabricated Using Metalmumps Process: Experimental Characterization and Multiscale Contact Modeling," J. Micro/Nanolith. MEMS MOEMS, 6(2), p. 023009.
37. Bhushan, B., and Nosonovsky, M., 2003, "Scale Effects in Friction Using Strain Gradient Plasticity and Dislocation-Assisted Sliding (Microslip)," Acta Mater., 51, pp. 4331-4345.
38. Jackson, R. L., 2006, "The Effect of Scale Dependant Hardness on Elasto-Plastic Asperity Contact Between Rough Surfaces," STLE Tribol. Trans., 49(2), pp. 135-150.
39. Jackson, R. L., Bhavnani, S. H., and Ferguson, T. P., 2008, "A Multi-Scale Model of Thermal Contact Resistance Between Rough Surfaces," ASME J. Heat Transfer, 130, p. 081301.
40. Polonsky, I. A., and Keer, L. M., 1996, "Scale Effects of Elastic-Plastic Behavior of Microscopic Asperity Contacts," ASME J. Tribol., 118, pp. 335-340. (Pubitemid 126551584)
41. Dareing, D. W., and Khonsari, M., 1995, "Liquid Transported Powder Lubricant Study," Technical Report No. AD-A304 885/7.
42. Hua, D. Y., and Khonsari, M. M., 1996, "Elastohydrodynamic Lubrication by Powder Slurries," ASME J. Tribol., 118(1), pp. 67-73. (Pubitemid 126551550)
43. Khonsari, M. M., 1997, "On the Modeling of Multi-Body Interaction Problems in Tribology," Wear, 207(1-2), pp. 55-62. (Pubitemid 27447599)
44. Trezona, R. I., Allsopp, D. N., and Hutchings, I. M., 1999, "Transitions Between Two-Body and Three-Body Abrasive Wear: Influence of Test Conditions in the Microscale Abrasive Wear Test," Wear, 225-229, pp. 205-214. (Pubitemid 30112868)
45. Adachi, K., and Hutchings, I. M., 2003, "Wear-Mode Mapping for the Micro-Scale Abrasion Test," Wear, 255(1-6), pp. 23-29. (Pubitemid 36967423)
46. Stempfle, P., Pantale, O., Djilali, T., Njiwa, R. K., Bourrat, X., and Takadoum, J., 2010, "Evaluation of the Real Contact Area in Three-Body Dry Friction by Micro-Thermal Analysis," Tribol. Int., 43(10), pp. 1794-1805.
47. Clary, D. R., and Mills, G., 2011, "Preparation and Thermal Properties of CuO Particles," J. Phys. Chem. C, 115(5), pp. 1767-1775.
48. Greenwood, J., and Williamson, J., 1966, "Contact of Nominally Flat Surfaces," Proc. R. Soc. London, Ser. A., 295(1442), pp. 300-319.
49. Jackson, R. L., 2010, "An Analytical Solution to an Archard-Type Fractal Rough Surface Contact Model," Tribol. Trans., 53(4), pp. 543-553.
50. Jackson, R. L., Malucci, R. D., Angadi, S., and Polchow, J. R., 2009, "A Simplified Model of Multiscale Electrical Contact Resistance and Comparison to Existing Closed Form Models," Proceedings of the 55th IEEE Holm Conference on Electrical Contacts, pp. 28-35.
51. Wadwalkar, S., Jackson, R., and Kogut, L., 2010, "A Study of the Elastic-Plastic Deformation of Heavily Deformed Spherical Contacts," Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 224(10), pp. 1091-1102.
52. Ohmura, T., Tsuzaki, K., and Matsuoka, S., 2001, "Nanohardness Measurement of High-Purity Fe-C Martensite," Scr. Mater., 45(8), pp. 889-894. (Pubitemid 32934747)
53. Williams, J., 2005, Engineering Tribology, Cambridge University, Cambridge, UK.
54. 2 Nanoparticle," Tribol. Lett., 45, pp. 131-141.
55. Mishra, M., and Szlufarska, I., 2012, "Analytical Model for Plowing Friction at Nanoscale," Tribol. Lett., 45, pp. 417-426.
56. Greer, J. R., and Nix, W. D., 2005, "Size Dependence of Mechanical Properties of Gold at the Sub-Micron Scale," Appl. Phys. A: Mater. Sci. Process., 80(8), pp. 1625-1629. (Pubitemid 40536734)
57. Greer, J. R., Oliver, W. C., and Nix, W. D., 2005, "Size Dependence of Mechanical Properties of Gold at the Micron Scale in the Absence of Strain Gradients," Acta Mater., 53(6), pp. 1821-1830. (Pubitemid 40245699)
58. Shan, Z. W., Mishra, R. K., Syed Asif, S. A., Warren, O. L., and Minor, A. M., 2008, "Mechanical Annealing and Source-Limited Deformation in Submicrometre-Diameter Ni Crystals," Nature Mater., 7(2), pp. 115-119. (Pubitemid 351161340)
59. Jackson, R. L., and Green, I., 2005, "A Finite Element Study of Elasto-Plastic Hemispherical Contact," ASME J. Tribol., 127(2), pp. 343-354. (Pubitemid 40664765)