A finite element study of elasto-plastic hemispherical contact against a rigid flat

Journal of Tribology

Volumn 127, Issue 2, 2005, Pages 343-354

  Jackson, Robert L ^a,b   Green, Itzhak ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b AUBURN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BEARINGS (MACHINE PARTS); ELASTOPLASTICITY; FINITE ELEMENT METHOD; PRESSURE EFFECTS; SURFACE PROPERTIES; YIELD STRESS;

CONTACT GEOMETRY; CONTACT PRESSURE; ELASTO-PLASTIC HEMISPHERICAL CONTACT; MICROCONTACTS;

TRIBOLOGY;

FINITE ELEMENT ANALYSIS;

EID: 18644380281     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1866166     Document Type: Article

References (31)

1. Greenwood, J. A., and Williamson, J. B. P., 1966, "Contact of Nominally Flat Surfaces," Proc. R. Soc. London, Ser. A, 295, pp. 300-319.
2. Timoshenko, S., and Goodier, J. N., 1951, Theory of Elasticity, McGraw-Hill, New York.
3. Green, I., 2002, "A Transient Dynamic Analysis of Mechanical Seals Including Asperity Contact and Face Deformation," Tribol. Trans., 45 (3), pp. 284-293.
4. Kogut, L., and Etsion, I., 2002, "Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat," Trans. ASME, J. Appl. Mech., 69(5), pp. 657-662.
5. Chang, W. R., Etsion, I., and Bogy, D. B., 1987, "An Elastic-Plastic Model for the Contact of Rough Surfaces," ASME J. Tribol., 109, pp. 257-263.
6. Zhao, Y., Maletta, D. M., and Chang, L., 2000, "An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic Flow," ASME J. Tribol., 122, pp. 86-93.
7. Jacq, C., Nelias, D., Lormand, G., and Girodin, D., 2003, "Development of a Three-Dimensional Semi-Analytical Elastic-Plastic Contact Code," ASME J. Tribol., 125, pp. 653-667.
8. Vu-Quo, L., Zhang, X., and Leesburg, L., 2000, "A Normal Force-Displacement Model for Contacting Spheres Accounting for Plastic Deformation: Force Driven Formulation," ASME J. Appl. Mech., 67, pp. 363-371.
9. Abbott, E. J., and Firestone, F. A., 1933, "Specifying Surface Quality-A Method Based on Accurate Measurement and Comparison," Mech. Eng. (Am. Soc. Mech. Eng.), 55, pp. 569-572.
10. Greenwood, J. A., and Tripp, J. H., 1971, "The Contact of Two Nominally Flat Rough Surfaces," Proc. Inst. Mech. Eng., 185, pp. 625-633.
11. Tabor, D., 1951, The Hardness of Materials, Clarendon Press, Oxford.
12. Davis, J. R., 1999, Metals Handbook, 2nd ed., ASM International, Metals Park, OH.
13. Francis, H. A., 1976, "Phenomenological Analysis of Plastic Spherical Indentation," ASME J. Eng. Mater. Technol., 98, pp. 272-281.
14. Oliver, W. C., and Pharr, G. M., 1992, "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation," J. Mater. Res., 7(6), pp. 1564-1583.
15. Mesarovic, S. D., and Fleck, N. A., 2000, "Frictionless Indentation of Dissimilar Elastic-plastic Spheres," Int. J. Solids Struct., 37, pp. 7071-7091.
16. Kral, E. R., Komvopoulos, K., and Bogy, D. B., 1993, "Elastic-Plastic Finite Element Analysis of Repeated Indentation of a Half-Space by a Rigid Sphere," ASME J. Appl. Mech., 60, pp. 829-841.
17. Kral, E. R., Komvopoulos, K., and Bogy, D. B., 1995, "Finite Element Analysis of Repeated Indentation of an Elastic-Plastic Layered Medium by a Rigid Sphere, Part I: Surface Results," ASME J. Appl. Mech., 62, pp. 20-28.
18. Kral, E. R., Komvopoulos, K., and Bogy, D. B., 1995, "Finite Element Analysis of Repeated Indentation of an Elastic-Plastic Layered Medium by a Rigid Sphere, Part II: Subsurface Results," ASME J. Appl. Mech., 62, pp. 29-42.
19. Streator, J. L., 2003, "Dynamic Contact of a Rigid Sphere With an Elastic Half-Space: A Numerical Simulation," ASME J. Tribol., 125, pp. 25-32.
20. Tian, H., and Saka, N., 1991, "Finite element analysis of an elastic-plastic two-layer half-space: normal contact," Wear, 148, pp. 47-68.
21. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge.
22. Giannakopoulos, A. E., Larsson, P. L., and Vestergaard, R., 1994, "Analysis of Vickers Indentation," Int. J. Solids Struct., 31, pp. 2679-2708.
23. Barber, J. R., and Ciavarella, M., 2000, "Contact Mechanics," Int. J. Solids Struct., 37, pp. 29-43.
24. Liu, G., Wang, G. J., and Lin, C., 1999, "A Survey of Current Models for Simulating the Contact between Rough Surfaces," Tribol. Trans., 42, pp. 581-591.
25. Johnson, K. L., 1968, "An Experimental Determination of the Contact Stresses Between Plastically Deformed Cylinders and Spheres," Engineering Plasticity, Cambridge University Press, Cambridge, pp. 341-361.
26. Reddy, J. N., 1993, An Introduction to the Finite Element Method, 2nd ed., McGraw-Hill, New York.
27. Shigley, J. E., and Mischke, C. R., 1989, Mechanical Engineering Design, 5th ed., McGraw-Hill, New York.
28. Quicksall, J., Jackson, R. L., and Green, I., 2004, "Elasto-plastic Hemispherical Contact for Varying Mechanical Properties," accepted for publication in J. Eng. Tribol.- Part J.
29. Williams, J. A., 1994, Engineering Tribology, Oxford University Press, Oxford.
30. Goodier, J. N., and Hodge, P. G., 1958, Elasticity and Plasticity, Wiley, New York.
31. Chang, W. R., 1986, "Contact, Adhesion, and Static Friction of Metallic Rough Surfaces," Ph.D. thesis, University of California, Berkeley, pp. 18-23.