The effect of scale-dependent hardness on elasto-plastic asperity contact between rough surfaces

Tribology Transactions

Volumn 49, Issue 2, 2006, Pages 135-150

  Jackson, Robert L ^a  

^a AUBURN UNIVERSITY   (United States)

Author keywords

Analysis and Models; Contact Mechanics; Contact of Rough Surfaces; Surface Roughness

Indexed keywords

DEFORMATION; ELASTIC MODULI; FINITE ELEMENT METHOD; HARDNESS; MATHEMATICAL MODELS; STATISTICAL METHODS; STRAIN; SURFACE PROPERTIES; SURFACE ROUGHNESS; YIELD STRESS;

CONTACT MECHANICS; ELASTO-PLASTIC CONTACT; STRAIN GRADIENT MODEL;

ELASTOPLASTICITY;

DEFORMATION; ELASTIC MODULI; ELASTOPLASTICITY; FINITE ELEMENT METHOD; HARDNESS; MATHEMATICAL MODELS; STATISTICAL METHODS; STRAIN; SURFACE PROPERTIES; SURFACE ROUGHNESS; YIELD STRESS;

EID: 33644583352     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/05698190500544254     Document Type: Article

References (46)

1. Majumdar, A. and Bhushan, B. (1991), “Fractal Model of Elastic-Plastic Contact Between Rough Surfaces,” ASME J. of Tribol., 113(1), pp 1-11.
2. Majumdar, A. and Bhushan, B. (1990), “Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces,” ASME J. of Tribol., 112(2), pp 205-216.
3. Warren, T L. and Krajcinovic, D. (1995), “Fractal Models of Elastic-Perfectly Plastic Contact of Rough Surfaces Based on the Cantor Set,” International Journal ofSolids and Structures, 32(19), pp 2907-2922.
4. Willner, K. (2004), “Elasto-PlasticNormal Contact of Three-Dimensional Fractal Surfaces Using Halfspace Theory,” ASME J. ofTribol., 126(1), pp 28-33.
5. Yan, W. and Komvopoulos, K. (1998), “Contact Analysis of Elastic-Plastic Fractal Surfaces,” Journal ofApplied Physics, 84(7), pp 3617-3624.
6. Jackson, R. L. and Streator, J. L. (2005), “A Multiscale Model for Contact between Rough Surfaces,” in World Tribology Conference III, Washington D.C.
7. Greenwood, J. A. and Williamson, J. B. P. (1966), “Contact of Nominally Flat Surfaces,” Proc. R. Soc. Lond. A, A295 pp 300-319.
8. Fleck, N. A., Hutchinson, J. W. (1993), “A Phenomenological Theory for StrainGradientEffectsinPlasticity,” J. Mech. Phys. Solids, 41, pp 1825-1857.
9. Polonsky, I. A. and Keer, L. M., (1996), “Scale Effects of Elastic-Plastic BehaviorofMicroscopicAsperity Contacts,” ASMEJ. Tribol., 118, pp 335-340.
10. Fleck, N. A., Muller, G. M., Ashby, M. F. and Hutchinson, J. W. (1994), “Strain Gradient Plasticity: Theory and Experiment,” Acta Metall. Mater., 42(2), pp 475-487.
11. Gao, H., Huang, Y., Nix, W D. and Hutchinson, J. W. (1999), “Mechanism-Based Strain Gradient Plasticity-I. Theory,” J. Mech. Phys. Solids, 47, pp 1239-1263.
12. Gao, H., Huang, Y., Nix, W. D. and Hutchinson, J. W. (2000), “J. Mechanism-Based Strain Gradient Plasticity-II. Analysis,” J. Mech. Phys. Solids, 48, pp 99-128.
13. Shu, J. Y. and Fleck, N. A., (1998), “The Prediction of a Size Effect in Micro-indentation,” Int. J. Solids Structures, 35(13), pp 1363-1383.
14. Wei, Y. and Hutchinson, J. W. (2003) “Hardness Trends in Micron Scale Indentation,” J. Mech. Phys. Solids, 51, pp 2037-2056.
15. Zhao, M., Slaughter, W. S., Li, M. and Mao, S. X. (2003), “Material-Length-Scale-Controlled Nanoindentation Size Effects due to Strain-Gradient Plasticity,” Acta Mater., 51, pp 4461-4469.
16. Rodriquez, R. and Gutierrez, I. (2003), “Correlation between Nanoindentation and Tensile Properties: Influence of Indentation Size Effect,” Mater. S. Eng., A361, pp 377-384.
17. Hutchinson, J. W. (2000), “Plasticity at the Micron Scale,” Int. J. Solids Structures, 37, pp 225-238.
18. Nix, W. D. and Gao, H. (1998), “Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity,” J. Mech. Phys. Solids, 46, pp 411-425.
19. Swadener, J. G., George, E. P and Pharr, G. M. (2002), “The Correlation of the Indentation Size Effect Measured with Indenters of Various Shapes,” J. Mech. Phys. Solids, 50, pp 681-694.
20. Jackson, R. L. and Green, I. (2005), “A Finite Element Study of Elasto-Plastic Hemispherical Contact,” ASME J. ofTribology, 127(2), pp 343-354.
21. Adams, G. G., Muftu, S. and Azhar, N. M. (2003), “A Scale-Dependant Model for Multi-Asperity Contact and Friction,” ASME J. Tribol., 125, pp 700-708.
22. Bhushan, B. and Nosonovsky, M. (2003), “Scale Effects in Friction Using Strain Gradient Plasticity and Dislocation-Assisted Sliding (microslip),” Acta Materialia, 51, pp 4331-4345.
23. Kogut, L. and Etsion, I. (2002), “Elastic-PlasticContactAnalysis ofa Sphere andaRigidFlat,” J. ofApplied Mechanics, Trans. ASME, 69(5), pp 657-662.
24. Mesarovic, S. D. and Fleck, N. A. (2000), “Frictionless Indentation of Dissimilar Elastic-plastic Spheres,” Int. J. Solids and Structures, 37, pp 7071-7091.
25. Chaudhri, M. M., Hutchings, I. M. and Makin, P L. (1984), “Plastic Compression of Spheres,” Philisophical Magazine, 49(4), pp 493-503.
26. Kogut, L. and Komvopoulos, K. (2004), “Analysis of Spherical Indentation Cycle of Elastic-Perfectly Plastic Solids,” J. Mater. Res., 19, pp 3641-3653.
27. Quicksall, J. J., Jackson, R. L. and Green, I. (2004), “Elasto-Plastic Hemispherical Contact Models for Various Mechanical Properties,” I MechE J. of Eng. Trib.-Part J., 218(4), pp 313-322.
28. Jackson, R. L., Chusoipin, I. and Green, I. (2005), “A Finite Element Study of the Residual Stress and Strain Formation in Spherical Contacts,” ASME Journal of Tribology., 127(3), pp 484-493.
29. Onions, R. A. and Archard, J. F. (1973), “The Contact of Surfaces having a Random Structure,” J. Phys. D: Appl. Phys., 6, pp 289-304.
30. Adams, G. G. and Muftu, S. (2005), “Improvements to a Scale-Dependent Model for Contact and Friction,” J. of Physics D: Applied Physics, 38(9), pp 1402-1409.
31. McCool, J. I. (1986), “Comparison of Models for the Contact of Rough Surfaces,” Wear, 107(1), pp 37-60.
32. Whitehouse, D. J. and Archard, J. F. (1970), “The Properties of Random Surfaces of Significance in their Contact,” Proc. R. Soc. Lond. A, 316, pp 97-121.
33. Kogut, L. and Jackson, R. L. (2005), “A Comparison of Contact Modeling Utilizing Statistical and Fractal Approaches,” In print ASME J. Tribol.
34. Majumdar, A. and Tien, C. L. (1990), “Fractal Characterization and Simulation of Rough Surfaces,” Wear, 136(2), pp 313-327.
35. Greenwood, J.A. and Wu, J. J. (2001), “Surface Roughness and Contact: An Apology,” Meccanica, 36(6), pp 617-630.
36. Zhang, H., Chang, L., Webster, M. N. and Jackson, A. (2003), “Effects of Friction on the Contact and Deformation behavior in Sliding Asperity Contacts,” Trib. Trans., 46(4), p. 514.
37. Epstein, D., Keer, L. M., Wang, Q. J., Cheng, H. S. and Zhu, D. (2003), “Effect of Surface Topography on Contact Fatigue in Mixed Lubrication,” Trib. Trans., 46(4), p. 506.
38. Front, I. (1990), “The Effects of Closing Force and Surface Roughness on Leakage in Radial Face Seals,” Technion, Israel Institute of Technology.
39. Etsion, I. and Front, I. (1994), “Model for Static Sealing Performances of End Face Seals,” Trib. Trans., 37(1), pp 111-119.
40. Polycarpou, A. and Etsion, I. (1999), “Analytical Approximations in Modeling Contacting Rough Surfaces,” ASME. J. Tribol., 121(2), pp 234-239.
41. Hess, D. P a. S., A. (1993), “Effects ofRelative AngularMotions onFriction at Rough Planar Contacts,” ASME. J. Tribol., 115(3), pp 96-101.
42. Hess, D. P A. (1992), “Normal and Angular Motions at Rough Planar Contacts During Sliding with Friction,” ASME. J. Tribol., 114(3), pp 567-578.
43. Liu, Z., Neville, A. and Reuben, R. L. (2000), “Analytical Solution for Elastic and Elastic-Plastic Contact Models,” Trib. Trans., 43(4), pp 627-634.
44. Green, I. (2002), “A Transient Dynamic Analysis of Mechanical Seals Including Asperity Contact and Face Deformation,” Trib. Trans., 45(3), pp 284-293.
45. Timoshenko, S. and Goodier, J. N. (1951), Theory of Elasticity, New York: McGraw-Hill.
46. Tabor, D. (1951), The Hardness ofMaterials, Oxford: Clarendon Press.