Three-dimensional accuracy of CAD/CAM titanium and ceramic superstructures for implant abutments using spiral scan microtomography

International Journal of Prosthodontics

Volumn 26, Issue 5, 2013, Pages 451-457

  Prasad, Rahul ^a   Al Kheraif, Abdulaziz Abdullah ^a  

^a KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMICS; CHROMIUM DERIVATIVE; DENTAL PORCELAIN; GLASS CERAMICS; TITANIUM; TOOTH IMPLANT; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; DENTAL ABUTMENT; DENTURE; DIMENSIONAL MEASUREMENT ACCURACY; MICRO-COMPUTED TOMOGRAPHY; MULTIVARIATE ANALYSIS; SPIRAL COMPUTER ASSISTED TOMOGRAPHY; THREE DIMENSIONAL IMAGING; TOOTH IMPLANT; TOOTH PROSTHESIS; ARTICLE;

CERAMICS; CHROMIUM ALLOYS; COMPUTER-AIDED DESIGN; DENTAL ABUTMENTS; DENTAL CASTING TECHNIQUE; DENTAL IMPLANTS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DIMENSIONAL MEASUREMENT ACCURACY; IMAGING, THREE-DIMENSIONAL; MULTIVARIATE ANALYSIS; TITANIUM; TOMOGRAPHY, SPIRAL COMPUTED; X-RAY MICROTOMOGRAPHY; YTTRIUM; ZIRCONIUM;

EID: 84891616128     PISSN: 08932174     EISSN: None     Source Type: Journal    
DOI: 10.11607/ijp.3302     Document Type: Article

References (46)

1. Weinberg LA. The biomechanics of force distribution in implant- supported prostheses. Int J Oral Maxillofac Implants 1993; 8: 19-31.
2. Sones AD. Complications with osseointegrated implants. J Prosthet Dent 1989; 62: 581-585.
3. Oyague RC, Sanchez-Turrion A, Lopez-Lozano JF, Suarez-Garcia MJ. Vertical discrepancy and microleakage of lasersintered and vacuum-cast implant-supported structures luted with different cement types. J Dent 2012; 40: 123-130.
4. Kan JY, Rungcharassaeng K, Bohsali K, Goodacre CJ, Lang BR. Clinical methods for evaluating implant framework fit. J Prosthet Dent 1999; 81: 7-13.
5. Jemt T, Book K. Prosthesis misfit and marginal bone loss in edentulous implant patients. Int J Oral Maxillofac Implants 1996; 11: 620-625.
6. Romero GG, Engelmeier R, Powers JM, Canterbury AA. Accuracy of three corrective techniques for implant bar fabrication. J Prosthet Dent 2000; 84: 602-607.
7. Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: Current status. Implant Dent 2001; 10: 85-92.
8. de Torres EM, Rodrigues RC, de Mattos Mda G, Ribeiro RF. The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks. J Dent 2007; 35: 800-805.
9. Gelbard S, Aoskar Y, Zalkind M, Stern N. Effect of impression materials and techniques on the marginal fit of metal castings. J Prosthet Dent 1994; 71: 1-6.
10. Goll GE. Production of accurately fitting full-arch implant frameworks:Part I-Clinical procedures. J Prosthet Dent 1991; 66: 377-384.
11. Mitha T, Owen CP, Howes DG. The three-dimensional casting distortion of five implant-supported frameworks. Int J Prosthodont 2009; 22: 248-250.
12. Duret F, Blouin JL, Duret B. CAD-CAM in dentistry. J Am Dent Assoc 1988; 117: 715-720.
13. Witkowski S, Komine F, Gerds T. Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques. J Prosthet Dent 2006; 96: 47-52.
14. Karatasli O, Kursoglu P, Capa N, Kazazoglu E. Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems. Dent Mater J 2011; 30: 97-102.
15. Beuer F, Aggstaller H, Edelhoff D, Gernet W, Sorensen J. Marginal and internal fits of fixed dental prostheses zirconia retainers. Dent Mater 2009; 25: 94-102.
16. Song XF, Yin L. Stress and damage at the bur-prosthesis interface in dental adjustments of a leucite-reinforced glass ceramic. J Oral Rehabil 2010; 37: 680-691.
17. Fasbinder DJ, Dennison JB, Heys DR, Lampe K. The clinical performance of CAD/CAM-generated composite inlays. J Am Dent Assoc 2005; 136: 1714-1723.
18. Baig MR, Tan KB, Nicholls JI. Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system. J Prosthet Dent 2010; 104: 216-227.
19. Papazoglou E, Brantley WA, Johnston WM. Evaluation of high-temperature distortion of high-palladium metal-ceramic crowns. J Prosthet Dent 2001; 85: 133-140.
20. Schwartz IS. A review of methods and techniques to improve the fit of cast restorations. J Prosthet Dent 1986; 56: 279-283.
21. Wang RR, Fenton A. Titanium for prosthodontic applications:A review of the literature. Quintessence Int 1996; 27: 401-408.
22. Fonseca JC, Henriques GE, Sobrinho LC, de Goes MF. Stressrelieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium-aluminum-vanadium copings. Dent Mater 2003; 19: 686-691.
23. Holmes JR, Bayne SC, Holland GA, Sulik WD. Considerations in measurement of marginal fit. J Prosthet Dent 1989; 62: 405-408.
24. Groten M, Axmann D, Probster L, Weber H. Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. J Prosthet Dent 2000; 83: 40-49.
25. Groten M, Girthofer S, Probster L. Marginal fit consistency of copy-milled all-ceramic crowns during fabrication by light and scanning electron microscopic analysis in vitro. J Oral Rehabil 1997; 24: 871-881.
26. Hamilton MJ, Vandewalle KS, Roberts HW, Hamilton GJ, Lien W. Microtomographic porosity determination in alginate mixed with various methods. J Prosthodont 2010; 19: 478-481.
27. Eden E, Topaloglu-Ak A, Cuijpers V, Frencken JE. Micro-CT for measuring marginal leakage of class II resin composite restorations in primary molars prepared in vivo. Am J Dent 2008; 21: 393-397.
28. Amano M, Agematsu H, Abe S, et al. Three-dimensional analysis of pulp chambers in maxillary second deciduous molars. J Dent 2006; 34: 503-508.
29. Lee HS, Berg JH, Garcia-Godoy F, Jang KT. Long-term evaluation of the remineralization of interproximal caries-like lesions adjacent to glass-ionomer restorations: A micro-CT study. Am J Dent 2008; 21: 129-132.
30. Yeo IS, Yang JH, Lee JB. In vitro marginal fit of three all-ceramic crown systems. J Prosthet Dent 2003; 90: 459-464.
31. Quintas AF, Oliveira F, Bottino MA. Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: An in vitro evaluation. J Prosthet Dent 2004; 92: 250-257.
32. Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. Int J Prosthodont 1997; 10: 478-484.
33. Martinez-Rus F, Suarez MJ, Rivera B, Pradies G. Evaluation of the absolute marginal discrepancy of zirconia-based ceramic copings. J Prosthet Dent 2011; 105: 108-114.
34. Beuer F, Naumann M, Gernet W, Sorensen JA. Precision of fit:Zirconia three-unit fixed dental prostheses. Clin Oral investig 2009; 13: 343-349.
35. Tan PL, Gratton DG, Diaz-Arnold AM, Holmes DC. An in vitro comparison of vertical marginal gaps of CAD/CAM titanium and conventional cast restorations. J Prosthodont 2008; 17: 378-383.
36. Besimo C, Jeger C, Guggenheim R. Marginal adaptation of titanium frameworks produced by CAD/CAM techniques. Int J Prosthodont 1997; 10: 541-546.
37. Karlsson S. The fit of Procera titanium crowns. An in vitro and clinical study. Acta Odontol Scand 1993; 51: 129-134.
38. Coli P, Karlsson S. Precision of a CAD/CAM technique for the production of zirconium dioxide copings. Int J Prosthodont 2004; 17: 577-580.
39. Beschnidt SM, Strub JR. Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehabil 1999; 26: 582-593.
40. Lee KB, Park CW, Kim KH, Kwon TY. Marginal and internal fit of all-ceramic crowns fabricated with two different CAD/CAM systems. Dent Mater J 2008; 27: 422-426.
41. Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: A systematic review. J Oral Rehabil 2010; 37: 641-652.
42. Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: A systematic review. J Prosthet Dent 2007; 98: 389-404.
43. Holand W, Rheinberger V, Apel E, et al. Clinical applications of glass-ceramics in dentistry. J Mater Sci Mater Med 2006; 17: 1037-1042.
44. Kelly JR. Developing meaningful systematic review of CAD/ CAM reconstructions and fiber-reinforced composites. Clin Oral Implants Res 2007;3(18, suppl):205-217.
45. Yilmaz H, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics. J Prosthet Dent 2007; 98: 120-128.
46. Han HS, Yang HS, Lim HP, Park YJ. Marginal accuracy and internal fit of machine-milled and cast titanium crowns. J Prosthet Dent 2011; 106: 191-197.