Stress and damage at the bur-prosthesis interface in dental adjustments of a leucite-reinforced glass ceramic

Journal of Oral Rehabilitation

Volumn 37, Issue 9, 2010, Pages 680-691

  Song, X F ^a   Yin, L ^b  

^a TIANJIN UNIVERSITY   (China)

^b JAMES COOK UNIVERSITY   (Australia)

Author keywords

Damage; Dental adjustments; Dental ceramic; Finite element analysis; Stress

Indexed keywords

ALUMINUM SILICATE; BIOMEDICAL AND DENTAL MATERIALS; DIAMOND; GLASS CERAMICS; LEUCITE; NICKEL; PROCAD CERAMIC;

ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; DENTAL EQUIPMENT; EQUIPMENT DESIGN; FINITE ELEMENT ANALYSIS; FORECASTING; HARDNESS; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; MECHANICS; PRESSURE; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TOOTH PROSTHESIS; TORQUE; YOUNG MODULUS;

ALUMINUM SILICATES; CERAMICS; DENTAL HIGH-SPEED EQUIPMENT; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DIAMOND; ELASTIC MODULUS; EQUIPMENT DESIGN; FINITE ELEMENT ANALYSIS; FORECASTING; HARDNESS; HUMANS; MATERIALS TESTING; MECHANICAL PHENOMENA; MICROSCOPY, ELECTRON, SCANNING; NICKEL; PRESSURE; STRESS, MECHANICAL; SURFACE PROPERTIES; TORQUE;

EID: 77955752154     PISSN: 0305182X     EISSN: 13652842     Source Type: Journal    
DOI: 10.1111/j.1365-2842.2010.02099.x     Document Type: Article

References (49)

1. van Noort R. Dental ceramics. Introduction to dental materials 2002, 231-246. van Noort R. In, ed, 2nd ed, Oxford, Elsevier
2. Conrad HJ, Seong WJ, Pesum IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent 2007, 98:389-404.
3. Kelly JR. Ceramics in restorative and prosthetic dentistry. Annu Rev Mater Sci 1997, 27:443-468.
4. Wang Y, Katsube N, Seghi RR, Rokhlin SI. Statistical failure analysis of adhesive resin cement bonded dental ceramics. Eng Fracture Mech 2007, 74:1838-1856.
5. Höland W, Rheinberger V, Apel E, van't Hoen C. Principles and phenomena of bioengineering with glass-ceramics for dental restoration. J Eur Ceram Soc 2007, 27:1521-1526.
6. Fasbinder DJ, Dennison JB, Heys DR, Lampe K. The clinical performance of CAD/CAM-generated composites inlays. J Am Dent Assoc 2005, 136:1714-1723.
7. Kelly JR. Development meaningful systematic review of CAD/CAM reconstructions and fiber-reinforced composites. Clin Oral Impl Res 2007, 18(Suppl.3):204-217.
8. Ironside JG, Swain MV. Ceramics in dental restorations - a review and critical issues. J Australas Ceram Soc 1998, 34:78-91.
9. Chen HY, Hickel R, Setcos JC, Kunzelmann K-H. Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. J Prosthet Dent 1999, 82:468-475.
10. Höland W, Rheinberger V, Apel E, van't Hoen C, Höland M, Dommann A. Clinical applications of glass-ceramics in dentistry. J Mater Sci Mater Med 2006, 17:1037-1042.
11. Bindl A, Lüthy H, Mörmann WH. Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent Mater 2006, 22:29-36.
12. Rosenblum M, Schulman A. A review of all-ceramic restorations. J Am Dent Assoc 1997, 128:297-307.
13. Rekow D, Thompson VP. Engineering long term clinical success of advanced ceramic prostheses. J Mater Sci Mater Med 2007, 18:47-56.
14. Hernandez AI, Roongruangphol T, Katsube N, Seghi RR. Residual interface tensile strength of ceramic bonded to dentin after cyclic loading and aging. J Prosthet Dent 2008, 99:209-217.
15. Attia A, Kern M. Fracture strength of all-ceramic crowns luted using two bonding methods. J Prosthet Dent 2004, 91:247-252.
16. Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 2002, 4:7-22.
17. Lawn BR, Deng Y, Miranda P, Pajares A, Chai H, Kim DK. Overview: damage in brittle layer structures from concentrated loads. J Mater Res 2002, 17:3019-3036.
18. Lohbauer U, Krämer N, Petschelt A, Frankenberger R. Correlation of in vitro fatigue and in vivo clinical performance of a glass ceramic material. Dent Mater 2008, 24:39-44.
19. Krämer N, Frankenberger R. Clinical performance if bonded leucite-reinforced glass ceramic inlays and onlays after eight years. Dent Mater 2005, 21:262-271.
20. Molin MK, Karlsson SL. A randomized 5-year clinical evaluation of 3 ceramic inlay systems. Int J Prosthodont 2000, 13:194-200.
21. Lohbauer U, Müller FA, Petschelt A. Influence of surface roughness on mechanical strength of resin composite versus glass ceramic materials. Dent Mater 2008, 24:250-256.
22. Taskonak B, Mecholsky JJ, Anusavice KJ. Residual stresses in bilayer dental ceramics. Biomaterials 2005, 26:3235-3241.
23. Uzun G. An overview of dental CAD/CAM systems. Biotechnol Biotechnol Eq 2008, 22:530-535.
24. Siegel SC, von Fraunhofer JA. Dental cutting: the historical development of diamond burs. J Am Dent Assoc 1998, 129:740-745.
25. Yin L, Jahanmir S, Ives LK. Abrasive machining of porcelain and zirconia with a dental handpiece. Wear 2003, 255:975-989.
26. Yin L, Han YG, Song XF, Wang H. Effect of diamond burs on process and damage involving in vitro dental resurfacing of a restorative porcelain. J Phys D Appl Phys 2007, 40:5291-5300.
27. Song XF, Yin L, Han YG, Li J. Finite element analysis of subsurface damage of ceramic prostheses in simulated intraoral dental resurfacing. J Biomed Mater Res B Appl Biomater 2008, 85B:50-59.
28. Song XF, Yin L. Subsurface damage induced in dental resurfacing of a feldspar porcelain with coarse diamond burs. J Biomech 2009, 42:355-360.
29. Yin L, Song XF, Qu SF, Huang T, Mei JP, Yang ZY. Performance evaluation of a dental handpiece in simulation of clinical finishing using a novel 2-DOF in vitro apparatus. Proc IME H J Eng Med 2006, 220:929-938.
30. Song XF, Yin L, Han YG. In-process assessment of dental cutting of a leucite-reinforced glass-ceramic. Med Eng Phys 2009, 31:214-220.
31. Vaidyanathan J, Vaidyanathan TK. Flexural creep deformation and recovery in dental composites. J Dent 2001, 29:545-551.
32. Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc 2006, 137:14s-21s.
33. Timoshenko SP, Goodier JN. Theory of elasticity 1970, New York, McGraw-Hill
34. Malkin S. Grinding Technology: Theory and Applications of Machining with Abrasives 1989, New York, Wiley
35. Rekow ED, Harsono M, Janal M, Thompson VP, Zhang G. Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater 2006, 22:125-132.
36. Isgro G, Wang H, Kleverlaan CJ, Feilzer AJ. The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs. Dent Mater 2005, 21:649-655.
37. Xu HHK, Kelley JR, Jahanmir S, Thompson VP, Rekow ED. Enamel subsurface damage due to tooth preparation with diamonds. J Dent Res 1997, 76:1698-1706.
38. Lawn BR, Pajares A, Zhang Y, Deng Y, Polack MA, Lloyd IK. Materials design in the performance of all-ceramic crowns. Biomaterials 2004, 25:2885-2892.
39. Lawn BR, Deng Y, Lloyd IK, Janal MN, Rekow ED, Thompson VP. Materials design of ceramic-based layer structures for crowns. J Dent Res 2002, 81:433-438.
40. Lawn BR, Bhowmick S, Bush MB, Qasim T, Rekow ED, Zhang Y. Failure modes in ceramic-based layer structures: a basis for materials design of dental crowns. J Am Ceram Soc 2007, 90:1671-1681.
41. Chuang T-J, Jahanmir S, Tang HC. Finite element simulation of straight plunge grinding for advanced ceramics. J Eur Ceram Soc 2003, 23:1723-1733.
42. Maksoud TMA, Mokbel AA, Morgan JE. Evaluation of surface and sub-surface cracks of ground ceramic. J Mater Process Technol 1999, 88:222-243.
43. Yui A, Watanabe T, Yoshida Y. Effect of grinding conditions upon bending strength of alumina ceramics. Grinding Fundamentals and Applications. ASME PED 1989, 39:229-239.
44. Tsitrou EA, Northeast SE, van Noort R. Brittleness index of machinable dental materials and its relation to the marginal chipping factor. J Dent 2007, 35:897-902.
45. Teixeira EC, Piascik JR, Stoner BR, Thompson JY. Dynamic fatigue and strength characterization of three ceramic materials. J Mater Sci Mater Med 2007, 18:1219-1224.
46. Subhash G, Zhang W. Finite element analysis of brittle cracking due to single grit rotating scratch. J Appl Mech 2003, 70:147-151.
47. Xu HK, Jahanmir S, Ives LK. Mechanisms of materials removal in abrasive machining of ceramics. Machining of Ceramics and Composites 1999, 11-94. Jahanmir S, Ramulu M, Koshy P. in, eds, New York, Marcel Dekker
48. Sindel J, Petschelt A, Grellner F, Dierken C, Greil P. Evaluation of subsurface damage in CAD/CAM machined dental ceramics. J Mater Sci Mater Med 1998, 9:291-295.
49. Shearer AC, Heymann HO, Wilson NH. Two ceramic materials compared for the production of CEREC inlays. J Dent 1993, 21:302-304.