Vertical discrepancy and microleakage of laser-sintered and vacuum-cast implant-supported structures luted with different cement types

Journal of Dentistry

Volumn 40, Issue 2, 2012, Pages 123-130

  Oyagüe, Raquel Castillo ^a   Sánchez Turrión, Andrés ^a   López Lozano, José Francisco ^a   Suárez García, Ma Jesús ^a  

^a UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

Author keywords

Cement retained implant supported prostheses; Laser sintering; Microleakage; Vacuum cast; Vertical discrepancy

Indexed keywords

ALLOY; CHROMIUM DERIVATIVE; GLASS IONOMER; GOLD ALLOY; KETAC CEM; KETAC-CEM; MAGNESIUM OXIDE; PALLADIUM; PANAVIA FLUORO; PANAVIA-FLUORO; POLYCARBOXYLATE CEMENT; RELY X UNICEM; RESIN CEMENT; TOOTH CEMENT; WATER; ZINC OXIDE;

ARTICLE; CEMENTATION; CHEMISTRY; CLASSIFICATION; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTURE; ENDODONTICS; HUMAN; LASER; MATERIALS TESTING; METHODOLOGY; RANDOMIZED CONTROLLED TRIAL; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TIME; TOOTH DISEASE; TOOTH PROSTHESIS; VACUUM;

CEMENTATION; CHROMIUM ALLOYS; DENTAL ABUTMENTS; DENTAL CASTING TECHNIQUE; DENTAL CEMENTS; DENTAL LEAKAGE; DENTAL MARGINAL ADAPTATION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTURE RETENTION; DENTURE, PARTIAL, FIXED; GLASS IONOMER CEMENTS; GOLD ALLOYS; HUMANS; LASERS; MAGNESIUM OXIDE; MATERIALS TESTING; METAL CERAMIC ALLOYS; MICROSCOPY, ELECTRON, SCANNING; PALLADIUM; POLYCARBOXYLATE CEMENT; RESIN CEMENTS; SURFACE PROPERTIES; TIME FACTORS; VACUUM; WATER; ZINC OXIDE;

EID: 84855903140     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2011.11.007     Document Type: Article

References (45)

1. A.P. Jaime, D.K. Vasconcellos, A.M. Mesquita, E.T. Kimpara, and M.A. Bottino Effect of cast rectifiers on the marginal fit of UCLA abutments Journal of Applied Oral Science 15 2007 169 174
2. L.A. Weinberg The biomechanics of force distribution in implant-supported prostheses International Journal of Oral and Maxillofacial Implants 8 1993 19 31
3. A.D. Sones Complications with osseointegrated implants Journal of Prosthetic Dentistry 62 1989 581 585
4. E. Abt Growing body of evidence on survival rates of implant-supported fixed prostheses Evidence Based Dentistry 9 2008 51 52
5. R.C. Oyagüe, A.S. Turrión, M. Toledano, F. Monticelli, and R. Osorio In vitro vertical misfit evaluation of cast frameworks for cement-retained implant-supported partial prostheses Journal of Dentistry 37 2009 52 58
6. G.E. Goll Production of accurately fitting full-arch implant frameworks: part I. Clinical procedures Journal of Prosthetic Dentistry 66 1991 377 384
7. T. Mitha, C.P. Owen, and D.G. Howes The three-dimensional casting distortion of five implant-supported frameworks International Journal of Prosthodontics 22 2009 248 250
8. J.C. Wataha Alloys for prosthodontic restorations Journal of Prosthetic Dentistry 87 2002 351 363 (Pubitemid 40433957)
9. M. Roach Base metal alloys used for dental restorations and implants Dental Clinics of North America 51 2007 603 627
10. H.F. Morris Properties of cobalt-chromium metal ceramic alloys after heat treatment Journal of Prosthetic Dentistry 63 1990 426 433
11. M.B. Leal, S.M. Paulino, V.O. Pagnano, and O.L. Bezzon Influence of investment type and sprue number on the casting accuracy of titanium crown margins Journal of Prosthetic Dentistry 95 2006 42 49 (Pubitemid 43053034)
12. K.J. Anusavice Phillips' science of dental materials 2003 W.B. Saunders Philadelphia
13. S.F. Rosenstiel, M.F. Land, and J. Fujimoto Contemporary fixed prosthodontics 2006 Mosby Publishing Inc. St. Louis, MO
14. K. Quante, K. Ludwig, and M. Kern Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology Dental Materials 24 2008 1311 1315
15. T. Akova, Y. Ucar, A. Tukay, M.C. Balkaya, and W.A. Brantley Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain Dental Materials 24 2008 1400 1404
16. Y. Ucar, T. Akova, M.S. Akyil, and W.A. Brantley Internal fit evaluation of crowns prepared using a new dental crown fabrication technique: laser-sintered Co-Cr crowns Journal of Prosthetic Dentistry 102 2009 253 259
17. A. Örtorp, D. Jönsson, A. Mouhsen, and P. Vult von Steyern The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study Dental Materials 27 2011 356 363
18. J.A. Sorensen A standardized method for determination of crown margin fidelity Journal of Prosthetic Dentistry 64 1990 18 24
19. D.L. Guichet, A.A. Caputto, H. Choi, and J.A. Sorensen Passivity of fit and marginal opening in screw- or cement-retained implant fixed partial denture designs International Journal of Oral and Maxillofacial Implants 15 2000 239 246
20. C.E. Misch Contemporary implant dentistry 2008 Mosby Publishing Inc. St. Louis, MO
21. K. Yoshida, Y. Tsuo, X. Meng, and M. Atsuta Mechanical properties of dual-cured resin luting agents for ceramic restoration Journal of Prosthodontics 16 2007 370 376
22. J. De Munck, M. Vargas, K. Van Landuyt, K. Hikita, P. Lambrechts, and B. Van Meerbeek Bonding of an autoadhesive luting material to enamel and dentin Dental Materials 20 2004 963 971 (Pubitemid 40146126)
23. S. Gorodovsky, and O. Zidan Retentive strength, disintegration, and marginal quality of luting cements Journal of Prosthetic Dentistry 68 1992 269 274
24. M. Gross, I. Abramovich, and E.I. Weiss Microleakage at the abutment-implant interface of osseointegrated implants: a comparative study International Journal of Oral and Maxillofacial Implants 14 1999 94 100
25. Y.H. Pan, L.C. Ramp, C.K. Lin, and P.R. Liu Comparison of 7 luting protocols and their effect on the retention and marginal leakage of a cement-retained dental implant restoration International Journal of Oral and Maxillofacial Implants 21 2006 587 592 (Pubitemid 44358681)
26. S.N. White, Z. Yu, and V. Kipnis The effect of seating force on film thickness of new adhesive luting agents Journal of Prosthetic Dentistry 68 1992 476 481
27. S.N. White, S. Ingles, and V. Kipnis Influence of marginal opening on microleakage of cemented artificial crowns Journal of Prosthetic Dentistry 71 1994 257 264
28. A.H. Tjan, J.R. Dunn, and B.E. Grant Marginal leakage of cast gold crowns luted with an adhesive resin cement Journal of Prosthetic Dentistry 67 1992 11 15
29. R.C. Oyagüe, M.I. Sánchez-Jorge, and A. Sánchez Turrión Evaluation of fit of zirconia posterior bridge structures constructed with different scanning methods and preparation angles Odontology 98 2010 170 172
30. P. Lombardas, A. Carbunaru, M.E. McAlarney, and R.W. Toothaker Dimensional accuracy of castings produced with ringless and metal ring investment systems Journal of Prosthetic Dentistry 84 2000 27 31
31. P.H. Rossetti, A.L. do Valle, R.M. de Carvalho, M.F. De Goes, and L.F. Pegoraro Correlation between margin fit and microleakage in complete crowns cemented with three luting agents Journal of Applied Oral Science 16 2008 64 69
32. A. Persson, M. Andersson, A. Oden, and G. Sandborgh-Englund A three-dimensional evaluation of a laser scanner and a touch-probe scanner Journal of Prosthetic Dentistry 95 2006 194 200 (Pubitemid 43388110)
33. S.E. Keith, B.H. Miller, R.D. Woody, and F.L. Higginbottom Marginal discrepancy of screw-retained and cemented metal-ceramic crowns on implant abutments International Journal of Oral and Maxillofacial Implants 14 1999 369 378
34. E. Gonzalo, M.J. Suárez, B. Serrano, and J.F. Lozano A comparison of the marginal vertical discrepancies of zirconium and metal ceramic posterior fixed dental prostheses before and after cementation Journal of Prosthetic Dentistry 102 2009 378 384
35. D. Xie, W.A. Brantley, B.M. Culbertson, and G. Wang Mechanical properties and microstructures of glass-ionomer cements Dental Materials 16 2000 129 138
36. M.A. Bottino, L.F. Valandro, L. Buso, and M. Ozcan The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns Quintessence International 38 2007 425 432
37. T. Jemt Failures and complications in 391 consecutively inserted fixed prostheses supported by Brnemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup International Journal of Oral and Maxillofacial Implants 6 1991 270 276
38. F. Javed, and G.E. Romanos The role of primary stability for successful immediate loading of dental implants. A literature review Journal of Dentistry 38 2010 612 620
39. R. Castillo-de Oyagüe, R. Osorio, C.D. Lynch, A. Gilmour, and M. Toledano Effect of alloy type and casting technique on the fracture strength of implant-cemented structures Medicina Oral, Patología Oral y Cirugía Bucal 16 2011 619 625
40. M. Baldassarri, Y. Zhang, V.P. Thompson, E.D. Rekow, and C.F. Stappert Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques Journal of Dentistry 39 2011 489 498
41. S.E. Elsaka, I.M. Hamouda, Y.A. Elewady, O.B. Abouelatta, and M.V. Swain Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate Journal of Dentistry 38 2010 648 654
42. J.R. Agar, S.M. Cameron, J.C. Hughbanks, and M.H. Parker Cement removal from restorations luted to titanium abutments with simulated subgingival margins Journal of Prosthetic Dentistry 78 1997 43 47
43. R.S. Squier, J.R. Agar, J.P. Duncan, and T.D. Taylor Retentiveness of dental cements used with metallic implant components International Journal of Oral and Maxillofacial Implants 16 2001 793 798 (Pubitemid 33675581)
44. R. Schneider, M.F. de Goes, G.E. Henriques, and D.C. Chan Tensile bond strength of dual curing resin-based cements to commercially pure titanium Dental Materials 23 2007 81 87 (Pubitemid 44895424)
45. C.L. Davidson, A.J. de Gee, and A. Feilzer The competition between the composite-dentin bond strength and the polymerization contraction stress Journal of Dental Research 63 1984 1396 1399