Lubricating a bright future: Lubrication contribution to energy saving and low carbon emission

Science China Technological Sciences

Volumn 56, Issue 12, 2013, Pages 2888-2913

  Cai, Meirong ^a   Guo, Ruisheng ^a   Zhou, Feng ^a   Liu, Weimin ^a  

^a LANZHOU INSTITUTE OF CHEMICAL PHYSICS   (China)

Author keywords

additives; coating; drag reduction; energy saving; low carbon emission; lubricant

Indexed keywords

ADDITIVES; AIR NAVIGATION; CARBON; COATINGS; DRAG; DRAG REDUCTION; ENERGY CONSERVATION; ENERGY UTILIZATION; FUEL ADDITIVES; IONIC LIQUIDS; LUBRICANTS; LUBRICATING OILS; PETROLEUM ADDITIVES; SOLID LUBRICANTS; SURFACE TREATMENT;

LIQUID LUBRICATION; LOW ENERGY CONSUMPTION; LOW-CARBON EMISSIONS; NANO SCIENCE AND TECHNOLOGIES; NANO-COMPOSITE COATING; SUSTAINABLE SOCIETY; SYNTHETIC APPROACH; TECHNICAL INNOVATION;

LUBRICATION;

EID: 84891496467     PISSN: 16747321     EISSN: 18691900     Source Type: Journal    
DOI: 10.1007/s11431-013-5403-2     Document Type: Article

References (304)

1. British Petroleum (BP), Statistical Review of World Energy.June 2011, page 42 http://www.bp.com/assets/bp-internet/globalbp/globalbp-uk-english/ reports-and-publications/statistical-energy-review-2011/STAGING/local-assets/ pdf/statistical-review-of-world-energy-full-report-2011
2. Liu G F, Chen X L, Riedel R, et al. Green technology foresight on automobile technology in China. Technol Anal Strat, 2011, 23(6): 683-696
3. Shafiullah G M, Amanullah M T O, Shawkat Ali A B M, et al. Prospects of renewable energy-A feasibility study in the Australian context. Renew Energ, 2012, 39(1): 183-197
4. 2 generating energy sources to greener electrochemical storage devices. Energ Environ Sci, 2011, 4(6): 2003-2019
5. Okkerse C, Bekkum H V. From fossil to green. Green Chem, 1999, 1(2): 107-114
6. Jacobson M Z. Review of solutions to global warming, air pollution, and energy security. Energ Environ Sci, 2009, 2: 148-173
7. Bhushan B. Introduction to Tribology. New York: John Wiley & Sons Inc, 2002
8. Xue Q J, Zhang Y Z, Li J. Development of industrial tribology in China. Tribol Online, 2007, 2(1): 10-13
9. Zhou F, Liang Y M, Liu W M. Ionic liquid lubricants: designed chemistry for engineering applications. Chem Soc Rev, 2009, 38(9): 2590-2599
10. Jost H P. Lubrication (Tribology), Education and Research, (Jost Report). Department of Education and Science, HMSO. London, 1966
11. Jost H P, Schofield J. Energy saving through tribolog: A technoeconomic study. Proc lnstn Mech Engrs, 1981, 195: 151-173
12. Nosonovsky M, Bhushan B. Green tribology: principles, research areas and challenges. P Roy Soc A-Math Phy, 2010, 368(1929): 4677-4694
13. Hamrock B J, Schmid S R, Jacobson B O. Fundamentals of Fluid Film Lubrication. 2nd ed. Boca Raton: CRC Press Inc., 2004
14. Dowson D. History of Tribology. 2nd ed. London: Professional Engineering Publishing, 1998
15. Mortier R M, Orzulik S T. Chemistry and Technology of Lubricants. 2nd ed. New York: Blackie Academic and Professional, 1997
16. Boyde S. Green lubricants. Environmental benefits and impacts of lubrication. Green Chem, 2002, 4(4): 293-307
17. Wilk M A, Abraham W D, Dohner B R. An investigation into the effect of zinc dithiophoaphate on ASTM sequence VIA fuel economy. SAE Technical Paper 961914, 1996, doi:10.4271/961914
18. Rizvi S Q A. A Comprehensive Review of Lubricant Chemistry, Technology, Selection, and Design. Baltimore: ASTM International, 2009
19. Watanabe H I, Dam W V, Parsons G, et al. A fuel economy study in heavy duty diesel engine lubricants. Lubrication Oil, 2011, 26(4): 10-17
20. Wu X L. Lubrication Design Handbook. Beijing: Chemical Industry Press, 2006
21. Bartzl W J. Gear oil influences on efficiency of gear and fuel economy of cars. P I Mech Eng D-J Aut, 2000, 214(2): 189-196
22. Gunstone F. Fatty Acid and Lipid Chemistry. London: Blackie Academic and Professional, 1996
23. Archbutt L, Deeley R M. Lubrication and Lubricants. 5th ed. London: Charles Griffin & Co, 1927
24. Wang Y M, Wang H. Lubricating Materials and Lubrication Technology. Beijing: Chemical Industry Press, 2005
25. Merryweahter S, Zweifel D. New oil soluble polyalkylene glycos for energy saving lubricant application. In: Proc the 4th World Tribology Congress, Kyoto, Japan, 2009. 37
26. Anastopoulos G, Kalligeros S, Schinas P, et al. Effect of dicarboxylic acid esters on the lubricity of aviation kerosene for use in CI engines. Friction, 2013, 3: 271-278
27. Wu R, Knapik M. Determination and application of stribeck curve in development of steel cold rolling lubricants. Iron Steel Technology, AIS Tech 2009, 2010, 2: 52-57
28. Rudnick L R, Balusamy V. Synthetic lubricants and high-performance functional fluids. New York: Marcel Dekker, Inc, 2004
29. Thom R, Kollman K, Frend M. Extended oil drain intervals: Conservation of resources or reduction of engine life. SAE International Congress, Detroit, Feb. 27-March 2, 1996
30. Reported as Lube Tech Report, Fuels Lubes Int, 1995.11-13
31. Rudnick L R. Lubricant Additives: Chemistry and Applications. New York: Marcel Dekker, Inc., 2003
32. Benda R, Bullen J. Polyalphaolefins-base fluids for high-performance lubricants. J Synth Lubr, 1996, 13(1): 41-57
33. Coffin P S, Lindsay C M, Mills A J, et al. The application of synthetic fluids to automotive lubricant development: trends today and tomorrow. J Synth Lubr, 1990, 7: 123-143
34. Dressler H, Meilus A A. Synthetic oils. U. S. 4604491, 1986
35. Bridwell B W, Johnson C E. Mono-alkylation of naphthalene. U. S. 3959399, 1976
36. Mc Gulre S E, Riddle J L, Nicks G E, et al. Prepartion of synthetic hydrocarbon lubricants. U. S. 3909432, 1975
37. Ye C F, Liu W M, Chen Y X, et al. Room-temperature ionic liquids: a novel versatile lubricant. Chem Commun, 2001, 21: 2244-2245
38. Earle M J, Seddon K R. Ionic liquids green solvents for the future. Pure Appl Chem, 2000, 72(7): 1391-1398
39. Hagiwara R, Ito Y. Room temperature ionic liquids of alkylimidazolium cations and fuoroanions. J Fluorine Chem, 2000, 105(2): 221-227
40. Lu Q M, Wang H Z, Ye C F, et al. Room temperature ionic liquid 1-ethyl-3-hexylimidazolium-bis(trifluoromethylsulfonyl)-imide as lubricant for steel-steel contact. Tribol Int, 2004, 37(7): 547-552
41. Weng L J, Liu X Q, Liang Y M, et al. Effect of tetraalkylphosphonium based ionic liquids as lubricants on the tribological performance of a steel-on-steel system. Tribol Lett, 2006, 26(1): 11-17
42. Xia Y Q, Wang S J, Zhou F, et al. Tribological properties of plasma nitrided stainless steel against SAE52100 steel under ionic liquid lubrication condition. Tribol Int, 2006, 39(7): 635-640
43. Torimoto T, Tsuda T, Okazaki K I, et al. New frontiers in materials science opened by ionic liquids. Adv Mater, 2010, 22(11): 1196-1221
44. Minami I, Inada T, Sasaki R, et al. Tribo-chemistry of phosphoniumderived ionic liquids. Tribol Lett, 2010, 40(2): 225-235
45. Minami I. Ionic liquids in tribology. Molecules, 2009, 14(6): 2286-2305
46. Jiménez A E, Bermúdez M D. Ionic liquids as lubricants of titanium Steel contact. Part 2: Friction, wear and surface interactions at high temperature. Tribol Lett, 2009, 37(2): 431-443
47. Bermúdez M D, Jiménez A E, Sanes J, et al. Ionic liquids as advanced lubricant fluids. Molecules, 2009, 14(8): 2888-2908
48. Yu B, Zhou F, Pang C J, et al. Tribological evaluation of α, ω′-diimidazoliumalkylene hexafluorophosphate ionic liquid and benzotriazole as additive. Tribol Int, 2008, 41(8): 797-801
49. 4-steel contacts. Tribol Lett, 2008, 32(2): 73-79
50. Minami I, Kita M, Kubo T, et al. The tribological properties of ionic liquids composed of trifluorotris(pentafluoroethyl) phosphate as a hydrophobic anion. Tribol Lett, 2008, 30(3): 215-223
51. Jiménez A E, Bermúdez M D. Ionic liquids as lubricants of titaniumsteel contact. Tribol Lett, 2008, 33(2): 111-126
52. Mu Z G, Zhou F, Zhang S X, et al. Effect of the functional groups in ionic liquid molecules on the friction and wear behavior of aluminum alloy in lubricated aluminum-on-steel contact. Tribol Int, 2005, 38(8): 725-731
53. Wang H Z, Lu Q M, Ye C F, et al. Friction and wear behaviors of ionic liquid of alkylimidazolium hexafluorophosphates as lubricants for steel/steel contact. Wear, 2004, 256(1-2): 44-48
54. Liu W M, Ye C F, Gong Q Y, et al. Tribological performance of room-temperature ionic liquids as lubricant. Tribol Lett, 2002, 13(2): 81-85
55. Song Z H, Liang Y M, Fan M J, et al. Lithium-based ionic liquids as novel lubricant additives for multiply alkylated cyclopentanes (MACs). Friction, 2013, 3: 222-231
56. Qu J, Blau P J, Dai S, et al. Ionic liquids as novel lubricants and additives for diesel engine applications. Tribol Lett, 2009, 35(3): 181-189
57. Qu, J, Truhan J J, Dai S, et al. Ionic liquids with ammonium cations as lubricants or additives. Tribol Lett, 2006, 22(3): 207-214
58. Predel T, Pohrer B, Schlücker E. Ionic liquids as alternative lubricants for special applications. Chem Eng Technol, 2010, 33(1): 132-136
59. Bronshteyn L A, Kreiner J H. Energy efficiency of industrial oils. Tribol Trans, 1999, 42(4): 771-776
60. Vipper A B, Bartz W, Karaulov A K, et al. Antifriction action of lubricant additives. Lubr Sci, 1995, 7(3): 247-259
61. Martin J M, Matta C, Bouchet M I D B, et al. Mechanism of friction reduction of unsaturated fatty acids as additives in diesel fuels. Friction, 2013, 3: 252-258
62. Zhang J, Jin Y L, Ma X G, et al. Modern Lubrication Technique. Beijing: Metallurgical Industry Press, 2008. 58
63. Jiménez A E, Bermúdez M D, Carrion F, et al. Room temperature ionic liquids as lubricant additives in steel-aluminium contacts: Influence of sliding velocity, normal load and temperature. Wear, 2006, 261(3-4): 347-359
64. Jiménez A E, Bermúdez M D. Imidazolium ionic liquids as additives of the synthetic ester propylene glycol dioleate in aluminium-steel lubrication. Wear, 2008, 265(5-6): 787-798
65. Priest M, Fox M F. Tribological properties of ionic liquids as lubricants and additives. Part 1: Synergistic tribofilm formation between ionic liquids and tricresyl phosphate. P I Mech Eng J-J Eng, 2008, 222(3): 291-303
66. Battez A H, González R, Viesca J L, et al. Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts. Wear, 2009, 266(11-12): 1224-1228
67. Yao M H, Liang Y M, Xia Y Q, et al. Bisimidazolium ionic liquids as the high-performance antiwear additives in poly(ethylene glycol) for steel-steel contacts. ACS Appl Mater Inter, 2009, 1(2): 467-471
68. Zhang H B, Xia Y Q, Yao M H, et al. The influences of methyl group at C2 position in imidazolium ring on tribological properties. Tribol Lett, 2009, 36(2): 105-111
69. Cai M R, Liang Y M, Yao M H, et al. Imidazolium ionic liquids as antiwear and antioxidant additive in poly(ethylene glycol) for steel/steel contacts. ACS Appl Mater Inter, 2010, 2(3): 870-876
70. Cai M R, Zhao Z, Liang Y M, et al. Alkyl imidazolium ionic liquids as friction reduction and anti-wear additive in polyurea grease for steel/steel contacts. Tribol Lett, 2010, 40(2): 215-224
71. Wornyoh E Y A, Jasti V K, Fred Higgs C. A review of dry particulate lubrication: Powder and granular materials. J Tribol, 2007, 129(2): 438-449
72. Zhou J F, Wu Z S, Zhang Z J, et al. Tribological behavior and lubricating mechanism of Cu nanoparticles in oil. Tribol Lett, 2000, 8(4): 213-218
73. Tarasov S, Kolubaev A, Belyaev S, et al. Study of friction reduction by nanocopper additives to motor oil. Wear, 2002, 252(1-2): 63-69
74. Zhao Y, Zhang Z, Dang H. Fabrication and tribological properties of Pb nanoparticles. J Nanopart Res, 2004, 6: 47-51
75. Yu H, Xu Y, Shi P, et al. Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant. T Nonferr Metal Soc, 2008, 18(3): 636-641
76. Zhang M, Wang X, Fu X, et al. Investigation of electrical contact resistance of ag nanoparticles as additives added to peg 300. Tribol T, 2009, 52(2): 157-164
77. Zhang M, Wang X, Liu W, et al. Performance and anti-wear mechanism of Cu nanoparticles as lubricating oil additives. Ind Lubr Tribol, 2009, 61(6): 311-318
78. Red'kin V E. Lubricants with ultradisperse diamond-graphite powder. Chem Tech Fuels oils, 2004, 40(3): 164-170
79. Yao Y, Wang X, Guo J, et al. Tribological property of onion-like fullerenes as lubricant additive. Mater Lett, 2008, 62(16): 2524-2527
80. Cumings J, Zettl A. Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes. Science, 2000, 289: 602-604
81. Kis A, Jensen K, Aloni S. Interlayer forces and ultralow sliding friction in multiwalled carbon nanotubes. Phys Rev Lett, 2006, 97: 025501-4
82. Guo W L, Zhong W Y, Dai Y T, et al. Coupled defect-size effects on interlayer friction in multiwalled carbon nanotubes. Phys Rev Lett, 2005, 72: 075409-10
83. Liu L, Fang Z, Gu A, et al. Lubrication effect of the paraffin oil filled with functionalized multiwalled carbon nanotubes for bismaleimide resin. Tribol Lett, 2011, 42: 59-65
84. Guo Y F, Guo W L, Chen C F. Modifying atomic-scale friction between two graphene sheets: A molecular-force-field study. Phys Rev B, 2007, 76: 155429-5
85. Eswaraiah V, Sankaranarayanan V, Ramaprabhu S. Graphene-based engine oil nanofluids for tribological applications. ACS Appl Mater Interf, 2011, 3: 4221-4227
86. Zhang Z J, Zhang J, Xue Q J. Synthesis and characterization of a molybdenum disulfide nanocluster. J Phys Chem, 1994, 98(49): 12973-12977
87. 2 nanoparticles. Wear, 2001 (1-2), 249: 149-156
88. Tenne R, Margulis L, Genut M, et al. Polyhedral and cylindrical structures of tungsten disulphide. Natrue, 1992, 360: 444-446
89. 2 nested fullerene-like nanostructures. Adv Mater, 1999, 11(11): 934-937
90. 2 nanoparticles on friction reduction in various lubrication regimes. Tribol Lett, 2004, 17(2): 179-186
91. 2 nanoparticles as lubricant additives. Mater Sci Eng A, 2003, 359(1-2): 82-85
92. 2 nanoparticles coated with dialkyldithiophosphate. J Mater Res, 2000, 15(2): 541-545
93. Hernandezbattez A, Fernandezrico J, Navasarias A, et al. The tribological behaviour of ZnO nanoparticles as an additive to PAO. Wear, 2006, 261(3-4): 256-263
94. 2 and ZnO nanoparticles as antiwear additive in oil lubricants. Wear, 2008, 265(3-4): 422-428
95. 2. Tribol Int, 2008, 41(5): 396-403
96. Hu Z S, Dong J X. Study on antiwear and reducing friction additive of nanometer titanium borate. Wear, 1998, 216(1): 87-91
97. Xue Q J, Wang Q H. Wear mechanisms of polyetheretherketone composites filled with various kinds of SiC. Wear, 1997, 213(1-2): 54-58
98. Hu Z S, Dong J X, Chen G X, et al. Preparation and tribological properties of nanoparticle lanthanum borate. Wear, 2000, 243(1-2): 43-47
99. Hu Z S, Lai R, Lou F, et al. Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive. Wear, 2002, 252(5-6): 370-374
100. 3 nanoparticles as an additive in lithium grease. Tribol Lett, 2010, 41(1): 113-119
101. 3 nanoparticles as a green additive in poly-alpha-olefin. Tribol Int, 2009, 42(7): 1029-1039
102. 3 nanoparticles in lubricating oils. J Rare Earth, 2008, 26(2): 163-167
103. 3 additives. Lubr Sci, 1995, 7(261): 261-272
104. 3 nanoparticles in liquid paraffin. Wear, 2001, 249(5-6): 333-337
105. 3 nanocluster modified with succinimide on the lubricating performance of liquid paraffin for steel-on-steel system. Tribol Int, 2001, 34(2): 83-88
106. 3 nanocluster capped with oleic acid by extraction method and application to lithium grease. Mater Res Bull, 2008, 43(8-9): 2220-2227
107. Duan B. A study on colloidal PST-A new type of water-based lubrication additive. Wear, 1999, 236(1-2): 235-239
108. Duan B, Lei H. The effect of particle size on the lubricating properties of colloidal polystyrene used as water based lubrication additive. Wear, 2001, 249(5-6): 528-532
109. Chen W G, Gao Y Z, Zhang H C, et al. Self-repairing characteristics of superfine powder of hydroxyl magnesium silicate on a worn steel surface. J Chin Ceram Soc, 2010, 38: 762-767
110. National Lubricating Grease Institute (NLGI). Grease Production Survey Report For the Calendar Years 2009, 2007 and 2006. 2010, https://www.nlgi.org/
111. Li W, Kong X H, Ruan M, et al. Green waxes, adhesives and lubricants. Philos Transact A-Math Phys Eng Sci, 2010, 368(1929): 4869-4890
112. Haseeb A S M A, Fazal M A, Jahirul M I, et al. Compatibility of automotive materials in biodiesel: A review. Fuel, 2011, 90(3): 922-931
113. Sharma B K, Liu Z S, Adhvaryu A, et al. One-pot synthesis of chemically modified vegetable oils. J Agric Food Chem, 2008, 56: 3049-3056
114. Shahid E M, Jamal Y. A review of biodiesel as vehicular fuel. Renew Sust Energ Rev, 2008, 12(9): 2484-2494
115. Quinchia L A, Delgado M A, Franco J M, et al. Low-temperature flow behaviour of vegetable oil-based lubricants. Ind Crop Prod, 2012, 37(1): 383-388
116. Aluyor E O, Obahiagbon K O, Ori-jesu M. Biodegradation of vegetable oils: A review. Sci Res Essay, 2009, 4(6): 543-548
117. Erhan S Z, Sharma B K, Perez J M. Oxidation and low temperature stability of vegetable oil-based lubricants. Ind Crop Prod, 2006, 24(3): 292-299
118. Salimon J, Salih N, Yousif E. Biolubricants: Raw materials, chemical modifications and environmental benefits. Eur J Lipid Sci Tech, 2010, 112(5): 519-530
119. Arngek A, Vitintin J. Lubricating properties of rapeseed-based oils. J Synth Lubr, 1999, 16(4): 281-296
120. Ng J H, Ng H K, Gan S. Advances in biodiesel fuel for application in compression ignition engines. Clean Technol Envir, 2009, 12(5): 459-493
121. Regueira T, Lugo L, Fandiño O, et al. Compressibilities and viscosities of reference and vegetable oils for their use as hydraulic fluids and lubricants. Green Chem, 2011, 13(5): 1293-1302
122. Shashidhara Y M, Jayaram S R. Vegetable oils as a potential cutting fluid-An evolution. Tribol Int, 2010, 43(5-6): 1073-1081
123. Fox N, Stachowiak G. Vegetable oil-based lubricants-A review of oxidation. Tribol Int, 2007, 40(7): 1035-1046
124. Asadauskas S J, Grigucericiene A, Stoncius A. Review of late stages of oxidation in vegetable oil lubricant basestocks. Proceedings of the International Conference BALTTRIB, 2007
125. Salimon J, Salih N. Chemical modification of oleic acid oil for biolubricant industrial applications. Aust J Basic Appl Sci, 2010, 4: 1999-2003
126. Wang L, Wang T. Chemical modification of partially hydrogenated vegetable oil to improve its functional properties for candles. J Am Oil Chem Soc, 2007, 84(12): 1149-1159
127. Uosukainena E, Linkoa Y Y, Lämsäb M, et al. Transesterification of trimethylolpropane and rapeseed oil methyl ester to environmentally acceptable lubricants. JAOCS, 1998, 75(11): 1557-1563
128. Salimon J, Salih N. Improved low temperature properties of 2-ethylhexyl 9 (10)-hydroxy-10 (9)-acyloxystearate derivatives Eur J Sci Res, 2009, 31(4): 583-591
129. Schmidt M A, Dietrich C R, Cahoon E B. Biotechnological enhancement of soybean oil for lubricant applications. Biotechnological Enhancement of Soybean Oil for Lubricant Applications Taylor & Francis Group, LLC, 2006
130. Kralova I, Sjöblom J. Biofuels-renewable energy sources: A review. J Disper Sci Technol, 2010, 31(3): 409-425
131. Moser B R. Biodiesel production, properties, and feedstocks. In Vitro Cell Dev Biol-Plant, 2009, 45(3): 229-266
132. Yusuf N N A N, Kamarudin S K, Yaakub Z. Overview on the current trends in biodiesel production. Energ Convers Manage, 2011, 52(7): 2741-2751
133. Dresel W H. Biologically degradable lubricating greases based on industrial crops. Ind Crop Prod, 1994, 2(4): 281-288
134. Adhvaryu A, Sung C, Erhan S Z. Fatty acids and antioxidant effects on grease microstructures. Ind Crop Prod, 2005, 21(3): 285-291
135. Sánchez R, Franco J M, Delgado M A, et al. Development of new green lubricating grease formulations based on cellulosic derivatives and castor oil. Green Chem, 2009, 11(5): 686-693
136. Wang X L, Kato K, Adachi K, et al. The effect of laser texturing of sic surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed. Tribol Int, 2001, 34(10): 703-711
137. Etsion I. State of the art in laser surface texturing. J Tribol, 2005, 127(1): 248-253
138. Etsion I. Improving tribological performance of mechanical components by laser surface texturing. Tribol Lett, 2004, 17(4): 733-737
139. Yamakiri H, Sasaki S, Kurita T, et al. Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water. Tribol Int, 2011, 44(5): 579-584
140. Garrido A H, González R, Cadenas M, et al. Tribological behavior of laser-textured nicrbsi coatings. Wear, 2011, 271(5-6): 925-933
141. Vilhena L M, Podgornik B, Vižintin J, et al. Influence of texturing parameters and contact conditions on tribological behaviour of laser textured surfaces. Meccanica, 2010, 46(3): 567-575
142. Yuan S, Huang W, Wang X. Orientation effects of micro-grooves on sliding surfaces. Tribol Int, 2011, 44(9): 1047-1054
143. Myshkin N K, Grigoriev A Y. Morphology: Texture, shape, and color of friction surfaces and wear debris in tribodiagnostics problems. J Frict Wear, 2008, 29(3): 192-199
144. Erdemir A. Review of engineered tribological interfaces for improved boundary lubrication. Tribol Int, 2005, 38(3): 249-256
145. Wang X L, Kato K, Adachi K, et al. Loads carrying capacity map for the surface texture design of sic thrust bearing sliding in water. Tribol Int, 2003, 36(3): 189-197
146. Ryk G, Kligerman Y, Etsion I. Experimental investigation of laser surface texturing for reciprocating automotive components. Tribol Trans, 2002, 45(4): 444-449
147. Ronen A, Etsion I, Kligerman Y. Friction-reducing surface texturing in reciprocating automotive components. Tribol Trans, 2001, 44(3): 359-366
148. Pettersson U. Influence of surface texture on boundary lubricated sliding contacts. Tribol Int, 2003, 36(11): 857-864
149. Yu X Q, He S, Cai R L. Frictional characteristics of mechanical seals with a laser-textured seal face. J Mater Process Tech, 2002, 129(1-3): 463-466
150. Pettersson U, Jacobson S. Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors. Tribol Int, 2007, 40(2): 355-359
151. Raeymaekers B, Etsion I, Talke F E. Enhancing tribological performance of the magnetic tape/guide interface by laser surface texturing. Tribol Lett, 2007, 27(1): 89-95
152. Borghi A, Gualtieri E, Marchetto D, et al. Tribological effects of surface texturing on nitriding steel for high-performance engine applications. Wear, 2008, 265(7-8): 1046-1051
153. Kango S, Singh D, Sharma R K. Numerical investigation on the influence of surface texture on the performance of hydrodynamic journal bearing. Meccanica, 2011, 47(2): 469-482
154. Mang T, Dresel W. Lubricants and Lubrication. 2nd ed. Darmstadt: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2007
155. Nosonovsky M. Self-organization at the frictional interface for green tribology. Philos Transact A-Math Phys Eng Sci, 2010, 368(1929): 4755-4774
156. Lee S M. International Encyclopedia of Composites. New York: VCH Publishers, 1990
157. Rohatgi P J B P K, Yust C S. Tribology of Composite Materials. ASM International, Materials Park, 1990: 101
158. Sung N P S N H. Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites. Wear, 1979, 53(1): 129-141
159. Khedkar I N J, Meletis E I. Sliding wear behavior of PTFE composites. Wear, 2002, 252(5-6): 361-369
160. Blanchet F E K T A. Sliding wear mechanism of polytetrafluoroethylene (PTFE) and PTFE composites. Wear, 1992, 153(1): 229-243
161. Li F, Yan F Y, Yu L G, et al. The tribological behaviors of coppercoated graphite filled PTFE composites. Wear, 2000, 237(1): 33-38
162. 2 filled polyetheretherketone. Tribol Int, 1997, 30(3): 193-197
163. 2-filled polyetheretherketone. J Appl Polym Sci, 1998, 69(1):135-141
164. He J, Wang L, Li W, et al. Experimental observations on the mechanical properties of nanoscale ceramic/teflon multilayers. Mate Chem Phys, 1998, 54(1-3): 334-337
165. Vande Voort S B J. The growth and bonding of transfer film and the role of CuS and PTFE in the tribological behavior of peek. Wear, 1995, 181-183: 212-221
166. Ben T, Chen C H, Cao H, et al. LB film structure of nanometer-scale PEEKK macrocyclic oligomers. Macromol Rapid Commun, 2002, 23: 196-199
167. Mondelin A, Furet B, Rech J. Characterisation of friction properties between a laminated carbon fibres reinforced polymer and a monocrystalline diamond under dry or lubricated conditions. Tribol Int, 2010, 43(9): 1665-1673
168. Dhieb H, Buijnsters J G, Celis J P, et al. Degradation of carbon fiber reinforced epoxy composites under sliding in ambient air. Sustain Constr Design, 2011: 53-58
169. Theiler G, Hubner W, Gradt T, et al. Friction and wear of carbon fibre filled polymer composites at room and low temperatures. Matwiss. u. Werkstofftechnik, 2004, 35(10-11): 683-689
170. Shi Y. The effect of surface modification on the friction and wear behavior of carbon nanofiber-filled PTFE composites. Wear, 2008, 264(11-12): 934-939
171. Jia J, Chen J, Zhou H, et al. Comparative investigation on the wear and transfer behaviors of carbon fiber reinforced polymer composites under dry sliding and water lubrication. Compos Sci Technol, 2005, 65(7-8): 1139-1147
172. Sun L, Yang Z, Li X. Tensile and tribological properties of ptfe and nanoparticles modified epoxy-based polyester fabric composites. Mater Sci Eng A, 2008, 497(1-2): 487-494
173. Bijwe J, Rattan R, Fahim M. Abrasive wear performance of carbon fabric reinforced polyetherimide composites: Influence of content and orientation of fabric. Tribol Int, 2007, 40(5): 844-854
174. Wan Y, Chen G, Raman S, et al. Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under dry sliding conditions. Wear, 2006, 260(9-10): 933-941
175. 4. Composites Part A, 2006, 37(9): 1351-1357
176. Su F, Zhang Z, Guo F, et al. Effects of solid lubricants on friction and wear properties of nomex fabric composites. Mater Sci Eng A, 2006, 424(1-2): 333-339
177. Su F, Zhang Z, Guo F, et al. Tribological properties of the composites made of pure and plasma treated-nomex fabrics. Wear, 2006, 261(3-4): 293-300
178. Zhang Z, Su F, Wang K, et al. Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nanoparticles. Mater Sci Eng A, 2005, 404(1-2): 251-258
179. 2. Mater Design, 2009, 30(10): 4414-4420
180. 2. Mater Design, 2010, 31(3): 1403-1409
181. Sang K. A study of the SiC-L composite ceramics for self-lubrication. Wear, 2002, 253(11-12): 1188-1193
182. 4-BN ceramic materials for dry sliding applications. Wear, 2002, 253: 1070-1076
183. Bewilogua K, Bräuer G, Dietz A, et al. Surface technology for automotive engineering. CIRP Annals-Manuf Technol, 2009, 58(2): 608-627
184. Donnet C, Erdemirb A. Historical developments and new trends in tribological and solid lubricant coatings. Surf Coat Technol, 2004, 180-181: 76-84
185. Wolf Dieter M. Titanium aluminum nitride films: A new alternative to tin coatings. J Vac Sci Technol, 1986, A4(6): 2717-2725
186. PalDey S C D S. Single layer and multilayer wear resistant coatings of (Ti, Al)N: A review. Mater Sci Eng A, 2003, 342: 58-79
187. 4 system. Appl Phys Lett, 1995, 66(20): 2640
188. Yuan Z G, Yang J F, Wang X, et al. Characterization and properties of quaternary Mo-Si-C-N coatings synthesized by magnetron sputtering technique. Surf Coat Technol, 2011, 205(10): 3307-3312
189. Polcar T, Cavaleiro A. High temperature properties of CrAlN, CrAlSiN and AlCrSiN coatings-structure and oxidation. Mater Chem Phys, 2011, 129(1-2): 195-201
190. Polcar T, Cavaleiro A. Structure and tribological properties of alcrtin coatings at elevated temperature. Surf Coat Technol, 2011, 205: S107-S110
191. Hong Y S, Kwon S H, Wang T, et al. Effects of Cr interlayer on mechanical and tribological properties of Cr-Al-Si-N nanocomposite coating. T Nonferr Metal Soc, 2011, 21: s62-s67
192. Lin J, Moore J J, Moerbe W C, et al. Structure and properties of selected (Cr-Al-N, TiC-C, Cr-B-N) nanostructured tribological coatings. Int J Refractory Metals Hard Mater, 2010, 28: 2-14
193. y coatings on mild steels derived from RF Magnetron sputtering. Surf Coat Technol, 2008, 203(5-7): 558-561
194. Ma S L, Ma D Y, Guo Y, et al. Synthesis and characterization of super hard, self-lubricating Ti-Si-C-N nanocomposite coatings. Acta Mater, 2007, 55(18): 6350-6355
195. Capek J, Hreben S, Zeman P, et al. Effect of the gas mixture composition on high-temperature behavior of magnetron sputtered Si-BZC-N coatings. Surf Coat Technol, 2008, 203(5-7): 466-469
196. Paternoster C, Fabrizi A, Cecchini R, et al. Thermal evolution and mechanical properties of hard Ti-Cr-B-N and Ti-Al-Si-B-N coatings. Surf Coat Technol, 2008, 203(5-7): 736-740
197. Krzanowski J E. Fabrication and tribological properties of composite coatings produced by lithographic and microbeading methods. Surf Coat Technol, 2009, 204(6-7): 955-961
198. Panjan M, Sturm S, Panjan P, et al. The influence of rotation during sputtering on the stoichiometry of TiAlN/CrNx multilayer coating. Surf Coat Technol, 2008, 203(5-7): 554-557
199. Luo Q S, Wang S C, Zhou Z Z, et al. Structure characterization and tribological study of magnetron sputtered nanocomposite nc-TiAlV (N,C)/a-C coatings. J Mater Chem, 2011, 21: 9746-9756
200. xN coating. Mater Corros, 2010, 61(11): 939-946
201. Savisalo T, Lewis D, Hovsepian P. Microstructure and properties of novel wear and corrosion resistant CrON/NbON nano-scale multilayer coatings. Surf Coat Technol, 2006, 200(8): 2731-2737
202. Hovsepian P E, Munz W D. Recent progress in large-scale production of nanoscale multilayer/superlattice hard coatings. Vacuum, 2003, 69: 27-36
203. Erdemir A, Donnet C. Tribology of diamond-like carbon films: Recent progress and future prospects. J Phys D-Appl Phys, 2006, 39(18): R311-R327
204. Kalin M, Velkavrh I, Vižintin J, et al. Review of boundary lubrication mechanisms of DLC coatings used in mechanical applications. Meccanica, 2008, 43(6): 623-637
205. Hainsworth S V, Uhure N J. Diamond like carbon coatings for tribology: Production techniques, characterisation methods and applications. Int Mater Rev, 2007, 52(3): 153-174
206. Kano M, Tanimoto I. Wear mechanism of high wear-resistant materials or automotive valve trains. Wear, 1991, 151(2): 229-243
207. Dai M J, Zhou K S, Yuan Z H, et al. The cutting performance of diamond and DLC-coated cutting tools. Diamond Relat Mater, 2000, 9(9-10): 1753-1757
208. Jiang J. Structure and mechanics of W-DLC coated spur gears. Surf Coat Technol, 2003, 176(1): 50-56
209. Tung S. Tribological characteristics and surface interaction between piston ring coatings and a blend of energy-conserving oils and ethanol fuels. Wear, 2003, 255(7-12): 1276-1285
210. Hershberger J. Evaluation of DLC coatings for spark-ignited, directinjected fuel systems. Surf Coat Technol, 2004, 179(2-3): 237-244
211. Kalin M, Vizintin J. The tribological performance of dlc-coated gears lubricated with biodegradable oil in various pinion/gear material combinations. Wear, 2005, 259(7-12): 1270-1280
212. Etsion I, Halperin G, Becker E. The effect of various surface treatments on piston pin scuffing resistance. Wear, 2006, 261(7-8): 785-791
213. Kano M. DLC coating technology applied to sliding parts of automotive engine. New Diamond Frontier Carbon Technol, 2006, 16: 201-210
214. Vanhulsel A, Velasco F, Jacobs R, et al. DLC solid lubricant coatings on ball bearings for space applications. Tribol Int, 2007, 40(7): 1186-1194
215. Lawes S D A, Hainsworth S V, Fitzpatrick M E. Impact wear testing of diamond-like carbon films for engine valve-tappet surfaces. Wear, 2010, 268(11-12): 1303-1308
216. Igor V, Mitjan K, Jozef V. The performance and mechanisms of DLC coated surfaces in contact with steel in boundary-lubrication conditions-A review. J Mech Eng, 2008, 54: 189-206
217. Ronkainen H, Varjus S, Koskinen J, et al. Differentiating the tribological performance of hydrogenated and hydrogen-free DLC coatings. Wear, 2001, 249(3-4): 260-266
218. Dimigen H, Hübsch H, Memming R. Tribological and electrical properties of metal-containing hydrogenated carbon films. Appl Phys Lett, 1987, 50(16): 1056-1058
219. Chen J S, Lau S P, Sun Z, et al. Metal-containing amorphous carbon films for hydrophobic application. Thin Solid Films, 2001, 398-399: 110-115
220. Rubio-Roy M, Corbella C, Andújar J L, et al. Tribological properties of fluorinated amorphous carbon thin films New Tribological Ways 2011, ISBN: 978-953-307-206-7, InTech, Available from: http://www.intechopen. com/articles/show/title/tribological-properties-of-fluorinated-amorphous-carbon- thin-films(47-70)
221. Vercammen K. Tribological behaviour of DLC coatings in combination with biodegradable lubricants. Tribol Int, 2004, 37(11-12): 983-989
222. Yang S H, Kong H, Lee K R, et al. Effect of environment on the tribological behavior of Si-incorporated diamond-like carbon films. Wear, 2002, 252(1-2): 70-79
223. Choi J, Nakao S, Miyagawa S, et al. The effects of Si incorporation on the thermal and tribological properties of DLC films deposited by PBII&D with bipolar pulses. Surf Coat Technol, 2007, 201(19-20): 8357-8361
224. Zou Y S, Wu Y F, Huang R F, et al. Mechanical properties and thermal stability of nitrogen incorporated diamond-like carbon films. Vacuum, 2009, 83(11): 1406-1410
225. Voevodin A A, O'Neill J P, Zabinski J S. Tribological performance and tribochemistry of nanocrystalline WC/amorphous diamond-like carbon composites. Thin Solid Films, 1999, 342(1-2): 194-200
226. Yu X, Hua M, Wang C. Influence of Ag content and nanograin size on microstructure, mechanical and sliding tribological behaviors of Ag-DLC films. J Nanosci Nanotechnol, 2009, 9: 6366-6371
227. Yu X, Wang C, Hua M, et al. Influence of Cr contents and nanograin sizes on microstructure, mechanical and sliding tribological behaviors of hard Cr-diamond-like carbon films. J Nanosci Nanotechnol, 2010, 10: 5379-5382
228. Cselle T. Application of coatings for tooling quo vadis 2005? Vakuum in Forschung Und Praxis VIP, 2005, 17(S1): 33-39
229. Veprek S, Veprekheijman M, Karvankova P, et al. Different approaches to superhard coatings and nanocomposites. Thin Solid Films, 2005, 476(1): 1-29
230. Veprek S, Veprekheijman M. Industrial applications of superhard nanocomposite coatings. Surf Coat Technol, 2008, 202(21): 5063-5073
231. Voevodin A A, Zabinski J S. Supertough wear-resistant coatings with "chameleon" surface adaptation. Thin Solid Films, 2000, 370: 223-231
232. Lin D Y, Zhao Y T. Preparation of novel hydroxyapatite/Yttria-stabilized- Zirconia gradient coatings by magnetron sputtering. Adv Eng Mater, 2011, 13(1-2): B18-B24
233. Zhang J, Lv H, Cui G, et al. Effects of bias voltage on the microstructure and mechanical properties of (Ti, Al, Cr)N hard films with N-gradient distributions. Thin Solid Films, 2011, 519(15): 4818-4823
234. Louro C, Moura C W, Carvalho N, et al. Thermal stability in oxidative and protective environments of a-C:H cap layer on a functional gradient coating. Diamond Relat Mater, 2011, 20(2): 57-63
235. Wang L, Wan S, Wang S C, et al. Gradient DLC-based nanocomposite coatings as a solution to improve tribological performance of aluminum alloy. Tribol Lett, 2010, 38(2): 155-160
236. 2 films grown by pulsed laser deposition. Thin Solid Films, 1992, 214: 156-163
237. 2 lubricant systems using Raman spectroscopy. Wear, 1993, 165(1): 103-108
238. Wang Y, Wang L, Wang S C, et al. Nanocomposite microstructure and environment self-adapted tribological properties of highly hard graphite-like film. Tribol Lett, 2010, 40(3): 301-310
239. Donnet C. Historical developments and new trends in tribological and solid lubricant coatings. Surf Coat Technol, 2004, 180-181: 76-84
240. Carre D. The use of solid ceramic and ceramic hard-coated components to prolong the performance of perfluoropolyalkylether lubricants. Surf Coat Technol, 1990, 43-44: 609-617
241. Xia Y, Zhou F, Sasaki S, et al. Remarkable friction stabilization of AISI 52100 steel by plasma nitriding under lubrication of alkyl naphthalene. Wear, 2010, 268(7-8): 917-923
242. Kano M. Super low friction of dlc applied to engine cam follower lubricated with ester-containing oil. Tribol Int, 2006, 39(12): 1682-1685
243. Leschziner M A, Choi H, ChoiPhil K S. Flow-control approaches to drag reduction in aerodynamics: Progress and prospects. Phil Trans R Soc A, 2011, 369: 1349-1351
244. Mavros P, Ricard A, Xuereb C, et al. A study of the effect of dragreducing surfactants on flow patterns in stirred vessels. Chem Eng Res Des, 2011, 89(1): 94-106
245. Dean B, Bhushan B. Shark-skin surfaces for fluid-drag reduction in turbulent flow: A review. Phil Trans R Soc A, 2010, 368: 4775-4806
246. Voronov R S, Papavassiliou D V, Lee L L. Boundary slip and wetting properties of interfaces: Correlation of the contact angle with the slip length. J Chem Phys, 2007, 124(20): 204701-10
247. Sbragaglia M, Prosperetti A. A note on the effective slip properties for microchannel flows with ultrahydrophobic surfaces. Phys Fluids, 2007, 19(4): 043603-8
248. Sahraoui M, Kaviany M. Slip and no-slip temperature boundary conditions at interface of porous, plain media: Conduction. Int J Heat Mass Transfer, 1993, 36: 1019-1033
249. Herr A E, Molho J I, Santiago J G, et al. Electroosmotic capillary flow with nonuniform Zeta potential. Anal Chem, 2000, 72(5): 1053-1057
250. Pismen L M, Rubinstein B Y. Kinetic slip condition, van der waals forces, and dynamic contact angle. Langmuir, 2001, 17: 5265-5270
251. Sparreboom W, van den Berg A, Eijkel J C T. Principles and applications of nanofluidic transport. Nature Nanotech, 2009, 4: 713-720
252. Chakraborty S. Microfluidics and Microfabrication. Berlin: Springer Science+Business Media, LLC, 2010
253. Wu W C, Wang X L, Wang D A, et al. Alumina nanowire forests via unconventional anodization and super-repellency plus low adhesion to diverse liquids. Chem Comm, 2009, 9: 1043-1045
254. Forsberg P, Nikolajeff F, Karlsson M. Cassie-Wenzel and Wenzel-Cassie transitions on immersed superhydrophobic surfaces under hydrostatic pressure. Soft Matter, 2011, 7: 104-109
255. Ou J, Perot J B, Rothstein J P. Laminar drag reduction in microchannels using ultrahydrophobic surfaces. Phys Fluids, 2004, 16: 4635-4643
256. Choi C H, Kim C J. Large slip of aqueous liquid flow over a nanoengineered superhydrophobic surface. Phys Rev Lett, 2006, 96: 066001-4
257. Zhou M, Li J, Wu C X, et al. Fluid drag reduction on superhydrophobic surfaces coated with carbon nanotube forests (CNTs). Soft Matter, 2011, 7: 4391-4396
258. Truesdell R, Mammoli A, Vorobieff P, et al. Drag reduction on a patterned superhydrophobic surface. Phys Rev Lett, 2006, 97: 044504-4
259. Watanabe K, Udagawa Y, Udagawa H. Drag reduction of Newtonian fluid in a circular pipe with a highly water-repellent wall. J Fluid Mech, 1999, 381, 225-238
260. Daniello R J, Waterhouse N E, Rothstein J P. Drag reduction in turbulent flows over superhydrophobic surface. Phys Fluids, 2009, 21: 085103-9
261. Chen J H, Tsai C C, Kehr Y Z, et al. An experimental study of drag reduction in a pipe with superhydrophobic coating at moderate reynolds numbers. EPJ Web of Conferences, 2010, 6: 19005
262. Bechert D W, Bruse M, Hage W, et al. Experiments on drag-reducing surfaces and their optimization with an adjustable geometry. J Fluid Mech, 1997, 338: 59-87
263. Walsh M J, Anders J B Jr. Riblet/LEBU research at NASA Langley. Appl Sci Res, 1989, 46: 255-262
264. Bechert D W, Bruse M, Hage W, et al. Biological surfaces and their technological application-Laboratory and flight experiments on drag reduction and separation control. InAIAA 28th Fluid Dynamics Conference. Snowmass Village, 1997, paper No. AIAA-1997-1960
265. Weiss M H. Implementation of drag reduction techniques in natural gas pipelines. In 10th European Drag Reduction Working Meeting, Berlin, Germany, 1997. 19-21
266. Matthews J N A. Low-drag suit propels swimmers. Phys Today, 2008, 61(8): 32
267. Kramer M O. Boundary layer stabilisation by distributed damping. J Aero Sci, 1957, 24: 459-460
268. Kramer M O. Boundary layer stabilisation by distributed damping. J Am Soc NavEngr, 1960, 72: 25-33
269. Benjamin T B. Fluid flow with flexible boundaries. In Proc. 11th Int. Cong. on Applicationof Mathematics. Gortler H, ed. Berlin: Springer, 1964: 109-128
270. Semenov B N. On conditions of modelling and choice of viscoelastic coatings for drag reduction. In: Recent Developments in turbulence management. Choi K S, ed. Dordrecht: Kluwer. 1991, 241-262
271. Choi K S, Yang X, Clayton B R, et al. Turbulent drag reduction using compliant surfaces. Proc R Soc Lond A, 1997, 453: 2229-2240
272. Kulik V M, Poguda I S, Semenov B N. Experimental investigation of one-layer viscoelastic coatings action on turbulent friction and wall pressure pulsations. In: Recent Developments in Turbulence Management. Choi K S, ed. Dordrecht: Kluwer, 1991. 263-289
273. Carpenter P W. Optimization of multiple-panel compliant walls for delay of laminar-turbulent transition. AIAA J, 1993, 31: 1187-1188
274. Gad-el-Hak M. Compliant coatings for drag reduction. Prog Aerosp Sci, 2002, 38(1): 77-99
275. Semenov B N, Amirov A I, Kulik V M, et al. Experimental studies of compliant coatings for reduction of turbulent friction. Thermophys Aeromech, 2007, 14(1): 133-142
276. Lee I W, Chun H H. Design parameter optimization of compliant coating for drag reduction. International Conference on Ship Drag Reduction (SMOOTH-SHIPS), Istanbul, Turkey, 20-21 May, 2010
277. McCormick M E, Bhattacharya R. Drag reduction of a submersible hull by electrolysis. Nav Eng J, 1973, 85(2): 11-16
278. Pang M J, Wei J J, Yu B. Numerical studies on effects of bubbles regular array on the liquid-phase turbulence. Can J Chem Eng, 2010, 88(6): 945-958
279. Madavan N K, Deutsch S, Merkle C L. Reduction of turbulent skin friction by micro-bubbles. Phys Fluids, 1984, 27: 356-363
280. Kato H, Iwashina T, Miyanaga M, et al. Effect of microbubbles on the structure of turbulence in a turbulent boundary layer. J Marine Sci Technol, 1999, 4: 155-162
281. Tsai J F, Chen C C. Experimental study on the micro-bubble drag reduction effect in water tunnel and towing tank. The 13th Asia-Pacific Workshop on Marine Hydrodynamics, Shanghai, China, 2006
282. Vakarelski I U, Marston J O, Chan D Y C, et al. Drag reduction by Leidenfrost vapor layers. Phys Rev Lett, 2011, 106: 214501-4
283. Latorre R. Ship hull drag reduction using bottom air injection. Ocean Eng, 1997, 24: 161-175
284. Sanders W C, Winkel E S, Dowling D R, et al. Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layer. J Fluid Mech, 2006, 552: 353-380
285. Elbing B R, Winkel E S, Lay K A, et al. Bubble-induced skin-friction drag reduction and the abrupt transition to air-layer drag reduction. J Fluid Mech, 2008, 612: 201-236
286. Ceccio S L. Friction drag reduction of external flows with bubble and gas injection. Annu Rev Fluid Mech, 2010, 42: 183-203
287. Toms B A. Some observation on the flow of linear polymer solutions through straight tubes at large Reynolds number. In: Proceedings of the 1st International Congress on Rheology, North-Holland Amsterdam, 1948, Vol. 2. 135-141
288. Lumley J L. Drag reduction in turbulent flow by polymer additives. J Polym Sci Macromol Rev, 1973, 7(1): 263-190
289. L'vov V S, Pomyalov A, ProcacciaI I, et al. Drag reduction by polymers in wall bounded turbulence. Phys Rev Lett, 2004, 92: 244503-4
290. Joseph D D. Fluid Dynamics of Viscoelastic Liquids. New York: Springer Verlag, 1990
291. Al-Sarkhi A, Abu-Nada E. Effect of drag reducing polymer onannular flow patterns of air and water in a small horizontal pipeline. In: Twelfth International Conference on Multiphase Production Technology, 25-27 May 2005, Barcelona, Spain
292. Al-Wahaibi T, Smith M, Angeli P. Effect of drag-reducing polymers on horizontal oil-water flows. J Petrol Sci Eng, 2007, 57: 334-346
293. Al-Yaari M, Soleimani A, Abu-Sharkh B, et al. Effect of drag reducing polymers on oil-water flow in a horizontal pipe. Int J Multiphase flow, 2009, 35: 516-524
294. Kulicke W M, Kotter M, Gragem H. Drag Reduction Phenomenon With Special Emphasis On Homogenous Polymer Solutions: Polymer Characterization/Polymer Solutions. Berlin: Springer-Verlag, 1989
295. Counc N S. Submarine platform technology. In: Technology for the United States Navy and Marine Corps, 2000-2035: Becoming a 21st-Century Force. Vol. 6, Platforms. Washington, DC: Natl Acad Press, 1997. 85-114
296. Winkel E S, Oweis G F, Vanapalli S A, et al. Friction drag reduction at high reynolds numbers using injected polymer solutions. 26th ONR Symp. Naval Hydrodynamics, Rome
297. Winkel E S, Oweis G F, Vanapalli S A, et al. High-Reynolds-number turbulent boundary layer friction drag reduction from wall-injected polymer solutions. J Fluid Mech, 2009, 621: 259-288
298. Stenzel V, Wilke Y, Hage W. Drag-reducing paints for the reduction of fuel consumption in aviation and shipping. Prog Org Chem, 2011, 70: 224-229
299. Sabadini E, Francisco K R, Bouteiller L. Bis-urea-based supramolecular polymer: The first self-assembled drag reducer for hydrocarbon solvents. Langmuir, 2010, 26(3): 1482-1486
300. Watanabe K. In: Proceedings of the International Symposium on Seawater Drag Reduction. Newport Rhode Island, July 1998
301. Semenov B N. The combination of polymer, compliant wall, and microbubble drag reduction schemes. Adv Mech Eng, 2011, Article ID 743975, doi:10.1155/2011/743975
302. Liu Y H, Xiao Y Q, Luo J B. Preparation of poly (N-isopropylacrylamide) brush bonded on silicon substrate and its water-based lubricating property. Sci China Tech Sci, 2012, 55: 2656-2661
303. Guo Y B, Wang D G, Liu S H, et al. Shear of molecular deposition films on glass substrates determined by tribometer. Sci China Tech Sci, 2011, 54: 1005-1010
304. Liu Y H, Wang X K, Liu P X, et al. Modification on the tribological properties of ceramics lubricated by water using fullerenol as a lubricating additive. Sci China Techn Sci, 2012, 55: 2656-2661