Specific engine performance and gaseous emissions characteristics of European test cycle and worldwide harmonized driving cycle for a heavy-duty diesel engine

Journal of Mechanical Science and Technology

Volumn 27, Issue 12, 2013, Pages 3893-3902

  Myung, Cha Lee ^a   Ko, Ahyun ^a   Kim, Juwon ^a   Choi, Kwanhee ^a   Kwon, Sangil ^b   Park, Simsoo ^a  

^a Korea University   (South Korea)

^b National Institute of Environmental Research   (South Korea)

Author keywords

Coefficient of variation; Continuous regeneration trap; European test cycle; Heavy duty diesel engine; Worldwide harmonized test cycle

Indexed keywords

COEFFICIENT OF VARIATION; CONTINUOUS REGENERATION TRAP; DIESEL PARTICULATE FILTERS; EMISSIONS CHARACTERISTICS; ENGINE OPERATING CONDITIONS; HEAVY-DUTY DIESEL ENGINE; TEMPERATURE RISING CHARACTERISTIC; TEST CYCLES;

DIESEL ENGINES;

EXHAUST SYSTEMS (ENGINE);

EID: 84891284493     PISSN: 1738494X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12206-013-0934-9     Document Type: Article

References (41)

1. J. B. Heywood and O. Z. Welling, Trends in performance characteristics of modern automobile SI and diesel engines, SAE Technical Paper, 2009-01-1892 (2009).
2. T. V. Johnson, Diesel emissions in review, SAE Technical Paper, 2011-01-0304 (2011).
3. T. V. Johnson, Review of diesel emissions and control, International Journal of Engine Research, 10(5) (2009) 275-285.
4. P. Eastwood, Particulate emissions from vehicles, John Wiley & Sons, Chichester, West Sussex, UK (2008).
5. H. Kim, Y. Sung, K. Jung, B. Choi and M. T. Lim, Size distributions and number concentrations of particles from the DOC and CDPF, Journal of Mechanical Science and Technology, 22(9) (2008) 1793-1799.
6. H. S. Surenhalli, K. Premchand, J. Johnson and G. Parker, Modeling study of active regeneration of a catalyzed particulate filter using one dimensional DOC and CPF models, SAE Technical Paper, 2011-01-1242 (2011).
7. M. Kobayashi, Y. Aoyagi, T. Adachi, T. Murayama, M. Hashimoto, Y. Goto and H. Suzuki, Effective BSFC and NOx reduction on super clean diesel of heavy duty diesel engine by high boosting and high EGR rate, SAE Technical Paper, 2011-01-0369 (2011).
8. J. Benajes, R. Novella, S. Arthozoul and C. Kolodziej, Particle size distribution measurements from early to late injection timing low temperature combustion in a heavy duty diesel engine, SAE Technical Paper, 2010-01-1121 (2010).
9. C. D. Rakopoulos and E. G. Giakoumis, Diesel engine transient operation: principles of operation and simulation analysis, Springer, London, UK (2009).
10. J. Ristimaki, J. Keskinen, A. Virtanen, M. Maricq and P. Aakko, Cold temperature PM emissions measurement: Method evaluation and application to light duty vehicles, Environmental Science & Technology, 39(24) (2005) 9424-9430.
11. R. Brück, P. Hirth and M. Rice, NOx aftertreatment for passenger cars and heavy duty truck applications for EU 6 and EUVI/US2010 legislation, SAE Technical Paper, 2009-01-0904 (2009).
12. J. Czerwinski, Y. Zimmerli, A. Mayer, N. Heeb and G. D'Urbano, Diesel emission with DPF+SCR in VERTdePN - testing & potentials, SAE Technical Paper, 2011-01-1139 (2011).
13. J. R. Theis, M. Dearth and R. McCabe, LNT+SCR catalyst systems optimized for NOx conversion on diesel applications, SAE Technical Paper, 2011-01-0305 (2011).
14. S. Choi, W. Park, S. Lee, K. Min and H. Choi, Methods for in-cylinder EGR stratification and its effects on combustion and emission characteristics in a diesel engine, Energy, 36(12) (2011) 6948-6959.
15. C. L. Myung, H. Lee, S. Kwon, S. Lee, J. Jun, Y. Lee, Y. Woo, M. Lee, G. N. Bae and S. Park, Inter-laboratory correlation exercise on a light-duty diesel passenger vehicle to verify nano-particle emission characteristics by Korea particle measurement program, Journal of Mechanical Science and Technology, 23(3) (2009) 729-738.
16. S. Park, H. Kim and B. Choi, Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20), Journal of Mechanical Science and Technology, 23(9) (2009) 2555-2564.
17. J. Lim, Y. Kim, S. Lee, J. Chung, W. Kang and K. Min, 3-D Simulation of the combustion process for di-methyl etherfueled diesel engine, Journal of Mechanical Science and Technology, 24(12) (2010) 2597-2604.
18. D. Jung, O. Kwon and O. T. Lim, Comparison of DME HCCI operating ranges for the thermal stratification and fuel stratification based on a multi-zone model, Journal of Mechanical Science and Technology, 25(6) (2011) 1383-1390.
19. C. Arcoumanis, C. Bae, R. Crookes and E. Kinoshita, The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review, Fuel, 87(7) (2008) 1014-1030.
20. Y. Sung, G. S. Jung and M. T. Lim, Delay of ignition in early direct-injected PCCI engine combustion using fuelevaporative cooling and cooled EGR, Journal of Mechanical Science and Technology, 25(6) (2011) 1409-1414.
21. S. I. Kwon and J. H. Hong, Particle number and size distribution characteristics from diesel- and liquefied-natural-gasfuelled buses for various emission certification modes in the Republic of Korea, Proc. of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 224(D12) (2010) 1569-1579.
22. H. Steven, Development of a worldwide harmonized heavyduty engine emission test cycle final report, Report TRANS/WP. 29/GRPE/2001/2, Economic Commission for Europe, Geneva, Switzerland (2001).
23. Proposal for Supplement 2 to the 05 series of amendments to Regulation No. 49 (Emissions of C. I. and P. I. (LPG and CNG) engines), Report ECE/TRANS/WP. 29/2009/114, Economic Commission for Europe, Geneva, Switzerland (2009).
24. J. May, D. Bosteels, A. Nicol, J. Andersson and C. Such, The application of emissions control technologies to a lowemissions engine to evaluate the capabilities of future systems for European and world-harmonized regulations, 16th Aachen Colloquium, Aachen, Germany, 8-10 October 2007 (2007).
25. C. L. Myung and S. Park, Exhaust nanoparticle emissions from internal combustion engines: A review, International Journal of Automotive Technology, 13(1) (2012) 9-22.
26. P. Bielaczyc, A. Szczotka and J. Woodburn, The effect of a low ambient temperature on the cold-start emissions and fuel consumption of passenger cars, Proc. of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 225(D9) (2011) 1253-1264.
27. C. L. Myung, J. Kim, S. Kwon, K. Choi, A. Ko and S. Park, Nano-particle emission characteristics of European and worldwide harmonized test cycles for heavy-duty diesel engines, International Journal of Automotive Technology, 12(3) (2011) 331-337.
28. J. Anderson, A. Mamakos, B. Giechaskiel, M. Carriero and G. Martini, Particle Measurement Programme (PMP) heavy-duty inter-laboratory correlation exercise (ILCE_HD) final report, Report EUR 24561 EN, European Commission, Joint Research Centre, Institute for Environment and Sus tainability, Ispra, Italy (2010).
29. J. Anderson and D. Clarke, UN-GRPE PMP phase 3 interlaboratory correlation exercise: Updated framework and laboratory guide for heavy duty (HD) engine testing: A document for the UK Department for Transport, Report RD 07/578701. 2a, Ricardo, Shoreham-by-Sea, West Sussex, UK (2008).
30. J. Stein, Installation and operation guide round robin engine for UN-GRPE PMP phase 3 inter-laboratory correlation exercise, Daimler AG, Stuttgart, Germany (2008).
31. Worldwide emissions standards-heavy duty and off-road vehicles, Delphi, Troy, Michigan, USA (2012).
32. Z. Zheng, K. C. Johnson, Z. Liu, T. D. Durbin, S. Hu, T. Huai, D. B. Kittelson and H. S. Jung, Investigation of solid particle number measurement: Existence and nature of sub-23 nm particles under PMP methodology, Journal of Aerosol Science, 42(12) (2011) 883-897.
33. A. Ayala, S. Zhang, J. Collins, T. Zhan, H. Dwyer, T. Huai, J. Herner and W. Chau, California's informal participation in the particle measurement programme (PMP) light duty inter-laboratory correlation exercise (ILCE_LD), Final research report, California Air Resources Board, Sacramento, California, USA (2008).
34. B. Giechaskiel, A. Mamakos, J. Andersson, P. Dilara, G. Martini, W. Schindler and A. Bergmann, Measurement of automotive nonvolatile particle number emissions within the European legislative framework: A review, Aerosol Science and Technology, 46(7) (2012) 719-749.
35. S. Lee, Y. Cho, M. Song, H. Kim, J. Park and D. Baik, Experimental study on the characteristics of nano-particle emissions from a heavy-duty diesel engine using a urea-SCR system, International Journal of Automotive Technology, 13(3) (2012) 355-363.
36. A. Ko, J. Kim, K. Choi, C. L. Myung, S. Kwon, K. Kim, Y. J. Y. Cho and S. Park, Experimental study of particle emission characteristics of heavy-duty diesel engine and effects of after-treatment systems: Selective catalytic reduction, diesel particulate filter, and diesel particulate and NOx reducetion, Proc. of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 226(D12) (2012) 1689-1696.
37. M. M. Maricq, Chemical characterization of particulate emissions from diesel engines: A review, Journal of Aerosol Science, 38(11) (2007) 1079-1118.
38. S. M. Zhang, F. Tian, G. F. Ren and L. Yang, SCR control strategy based on ANNs and Fuzzy PID in a heavy-duty diesel engine, International Journal of Automotive Technology, 13(5) (2012) 693-699.
39. J. Lee, K. Hong, S. Choi, S. Yu, H. Choi and K. Min, Comparison of the effects of multiple injection strategy on the emissions between moderate and heavy EGR rate conditions: part 1-pilot injections, Journal of Mechanical Science and Technology, 27(4) (2013) 1135-1141.
40. K. Poorghasemi, F. Ommi, H. Yaghmaei and A. Namaki, An investigation on effect of high pressure post injection on soot and NO emissions in a DI diesel engine, Journal of Mechanical Science and Technology, 26(1) (2012) 269-281.
41. H. Kim and J. Lee, Quantitative analysis of vehicle particle emission by using calibrated CPC system, Journal of Mechanical Science and Technology, 25(11) (2011) 2959-2967.