Reconfigurable monitoring system for time-frequency analysis on industrial equipment through STFT and DWT

IEEE Transactions on Industrial Informatics

Volumn 9, Issue 2, 2013, Pages 760-771

  Cabal Yepez, Eduardo ^a   Garcia Ramirez, Armando G ^a   Romero Troncoso, Rene J ^a   Garcia Perez, Arturo ^a   Osornio Rios, Roque A ^b  

^a UNIVERSITY OF GUANAJUATO   (Mexico)

^b UNIVERSIDAD AUTÓNOMA DE QUERÉTARO   (Mexico)

Author keywords

Discrete wavelet transform (DWT); Field programmable gate arrays (FPGAs); Short time fourier transform (STFT); System monitoring; System on chip (SoC); Time frequency analysis

Indexed keywords

DESIGN AND IMPLEMENTATIONS; DYNAMIC CHARACTERISTICS; EQUIPMENT MONITORING; SHORT TIME FOURIER TRANSFORMS; SYSTEM MONITORING; SYSTEM ON CHIP DESIGN; SYSTEM-ON-CHIP; TIME FREQUENCY ANALYSIS;

ACCIDENT PREVENTION; APPLICATION SPECIFIC INTEGRATED CIRCUITS; COSTS; FIELD PROGRAMMABLE GATE ARRAYS (FPGA); INDUCTION MOTORS; INDUSTRIAL APPLICATIONS; MACHINERY; MICROPROCESSOR CHIPS; MONITORING; PROGRAMMABLE LOGIC CONTROLLERS; VARIABLE SPEED DRIVES;

DISCRETE WAVELET TRANSFORMS;

EID: 84889239975     PISSN: 15513203     EISSN: None     Source Type: Journal    
DOI: 10.1109/TII.2012.2221131     Document Type: Conference Paper

References (48)

1. W. Cao, B. C. Mecrow, G. J. Atkinson, J. W. Bennett, and D. J. Atkinson, "Overview of electric motor technologies used for more electric aircraft (MEA)," IEEE Trans. Ind. Electron., vol. 59, no. 9, pp. 3523-3531, Sep. 2012.
2. P. Zhang, Y. Du, T. G. Habetler, and B. Lu, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 34-46, Jan./Feb. 2011.
3. I. P. Georgakopoulos, E. D. Mitronikas, and A. N. Safacas, "Detection of induction motor faults in inverter drives using inverter input current analysis," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4365-4373, Sep. 2011.
4. M. P. Kazmierkowski, M. Jasinski, and W. Wrona, "DSP-based control of gird-connected power converters operating under grid distortions," IEEE Trans. Ind. Inform., vol. 7, no. 2, pp. 204-2011, May 2011.
5. C. A. Sepulveda, J. A. Munoz, J. R. Espinoza,M. E. Figueroa, and P. E. Melin, "All-on-chip dq-frame based D-STATCOM control implementation in a low-cost FPGA," IEEE Trans. Ind. Electron., vol. 60, no. 2, pp. 659-669, Feb. 2013.
6. N. Pogkas, G. E. Karastergios, C. P. Antonopoulos, S. Koubias, and G. Papadopoulos, "Architecture design and implementation of an ad-hoc network for disaster relief operations," IEEE Trans. Ind. Inform., vol. 3, no. 1, pp. 63-72, Feb. 2007.
7. P. K. Mahapatra, A. Kumar, M. Singh, N. S. Grewal, L. Pandey, and M. L. Singla, "Microcontroller based portable instrument for determination of nickel in edible oils," J. Sci. Ind. Res. India, vol. 67, pp. 132-135, Feb. 2008.
8. B. Akin, S. Choi, U. Orguner, and H. A. Toliyat, "A simple real-time fault signature monitoring tool for motor-drive-embedded fault diagnosis system," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1990-2001, May 2011.
9. D. Li, M. Shen, J. Huangfu, J. Long, Y. Tao, J. Wang, and C. Li, "Wireless sensing system-on-chip for near-field monitoring of analog and switch quantities," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1288-1299, Feb. 2012.
10. E. Monmasson, L. Idkhajine, N. Cirstea, I. Bahri, A. Tisan, and M. W. Naouar, "FPGAs in industrial control applications," IEEE Trans. Ind. Inform., vol. 7, no. 2, pp. 224-243, May 2011.
11. C. Buccella, C. Cecati, and H. Latafat, "Digital control of power converters - A survey," IEEE Trans. Ind. Inform., vol. 8, no. 3, pp. 437-447, Aug. 2012.
12. L. Costas, P. Colodron, J. J. Rodriguez-Andina, J. Farina, and M.-Y. Chow, "Analysis of two FPGA design methodologies applied to an image processing system," in Proc. IEEE Int. Symp. Ind. Electron. (ISIE), Bari, Italy, 2010, pp. 3040-3044.
13. A. Malinowski and Y. Hao, "Comparison of embedded system design for industrial applications," IEEE Trans. Ind. Inform., vol. 7, no. 2, pp. 244-254, May 2011.
14. R. J. Romero-Troncoso, R. Saucedo-Gallaga, E. Cabal-Yepez, A. Garcia-Perez, R. A. Osornio-Rios, R. Alvarez-Salas, H. Miranda-Vidales, and N. Huber, "FPGA-based online detection of multiple combined faults in induction motors through information entropy and fuzzy inference," IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5263-5270, Nov. 2011.
15. D. Granados-Lieberman, R. J. Romero-Troncoso, E. Cabal-Yepez, R. A. Osornio-Rios, and L. A. Franco-Gasca, "A real-time smart sensor for high-resolution frequency estimation in power systems," Sensors-Basel, vol. 9, pp. 7412-7429, Sep. 2009.
16. X. Pei and Y. Kang, "Short-circuit fault protection strategy for high-power three-phase three-wire inverter," IEEE Trans. Ind. Inform., vol. 8, no. 3, pp. 545-553, Aug. 2012.
17. D. Ramirez-Munoz, D. Moro-Perez, J. Sanchez-Moreno, S. Casans- Berga, and E. Castro-Montero, "Design and experimental verification of a smart sensor to measure the energy and power consumption in a one-phase AC line," Measurement, vol. 42, pp. 412-419, Apr. 2009.
18. M. Nemec, K. Drobnic, D. Nedeljkovic, R. Fiser, and V. Ambrozic, "Detection of broken bars in induction motor through the analysis of supply voltage modulation," IEEE Trans. Ind. Electron., vol. 57, no. 8, pp. 2879-2888, Aug. 2010.
19. P. Kundu and A. Das, "Microprocessor-based system for identification of phase sequence and detection of phase unbalance on three-phase ac supply," J. Sci. Ind. Res. India, vol. 68, pp. 597-604, Feb. 2009.
20. W.Wang and O. A. Jianu, "A smart sensing unit for vibration measurement and monitoring," IEEE-ASME T. Mech., vol. 15, pp. 70-78, Feb. 2010.
21. Z. He, P. Zanchetta, K. J. Bradley, and C. Gerada, "A low-intrusion load and efficiency evaluation method for in-service motors using vibration tests with an accelerometer," IEEE Trans. Ind. Appl., vol. 46, pp. 1341-1349, Jul./Aug. 2010.
22. A. S. Raj and N. Murali, "Early classification of bearing faults using morphological operators and fuzzy inference," IEEE Trans. Ind. Electron., vol. 60, pp. 567-574, Feb. 2013.
23. M. Trejo-Hernandez, R. A. Osornio-Rios, R. J. Romero-Troncoso, C. Rodriguez-Donate, A. Dominguez-Gonzalez, and G. Herrera-Ruiz, "FPGA-based fused smart-sensor for tool-wear area quantitative estimation in CNC machine inserts," Sensors-Basel, vol. 10, pp. 3373-3388, Apr. 2010.
24. J.-D. Son, G. Niu, B.-S. Yang, D.-H. Hwang, and D.-S.Kang, "Development of smart sensors system for machine fault diagnosis," Expert Syst. Appl., vol. 39, pp. 11981-11991, Nov. 2009.
25. A. Garcia-Perez, R. J. Romero-Troncoso, E. Cabal-Yepez, and R. A. Osornio-Rios, "The application of high-resolution spectral analysis for identifyingmultiple combined faults in inductionmotors," IEEE Trans. Ind. Electron., vol. 58, pp. 2002-2010, May 2011.
26. M. Delgado, J. C. Urresty, L. Albiol, J. A. Ortega, A. Garcia, L. Romeral, and E. Vidal, "Motor fault classification system including a novel hybrid feature reduction methodology," in Proc. Ind. Electron. Society Annual Conference (IECON), Melbourne, Australia, 2011, pp. 2382-2387.
27. S. Bolognani, S. Calligaro, R. Petrella, and M. Tursini, "Sensorless control of IPM motors in the low-speed range and at standstill by HF injection and DFT processing," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 96-104, Jan./Feb. 2011.
28. K. Komeza and M. Dems, "Finite-element and analytical calculations of no-load core losses in energy-saving inductionmotors," IEEE Trans. Ind. Electron., vol. 59, no. 7, pp. 2934-2946, Jul. 2012.
29. Z. Wang and C. S. Chang, "Online fault detection of induction motors using frequency domain independent components analysis," in Proc. IEEE Int. Symp. Ind. Electron. (ISIE), Gdansk, Poland, 2011, pp. 2132-2137.
30. L. M. Contreras-Medina, R. J. Romero-Troncoso, E. Cabal-Yepez, J. J. Rangel-Magdaleno, and J. R. Millan-Almaraz, "FPGA-based multiple-channel vibration analyzer for industrial applications in induction motor failure detection," IEEE Trans. Instrum. Meas., vol. 59, no. 1, pp. 63-72, Jan. 2010.
31. J. P. Amezquita-Sanchez, E. Cabal-Yepez, R. J. Romero-Troncoso, R. A. Osornio-Rios, and A. Garcia-Perez, "Determination of system frequencies inmechanical systems during shutdown transient," J. Sci. Ind. Res. India, vol. 69, pp. 415-421, Jun. 2010.
32. S. Nandi, T. C. Ilamparithi, S. B. Lee, and D. Hyun, "Detection of eccentricity faults in induction machines based on nameplate parameters," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1673-1683, May 2011.
33. S. R. Samantaray and P. K. Dash, "Transmission line distance relaying using a variable window short-time Fourier transform," Electr. Pow. Syst. Res., vol. 78, pp. 595-604, Apr. 2008.
34. M. Pan, G. Liu, T. Lin, and X. Hong, "WEIS wheel speed real-time measuring method for VOSM," Front. Mech. Eng. China, vol. 5, pp. 322-327, Mar. 2010.
35. Y.-Y. Hong and Y. Y. Chen, "Placement of power quality monitors using enhanced genetic algorithm and wavelet transform," IET Gener. Transm. Dis., vol. 5, pp. 461-466, Apr. 2011.
36. A. Ordaz-Moreno, R. J. Romero-Troncoso, J. A. Vite-Frias, J. R. Rivera-Guillen, and A. Garcia-Perez, "Automatic online diagnosis algorithm for broken-bar detection on induction motors based on discrete wavelet transform for FPGA implementation," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 2193-2202, May 2008.
37. J. Pons-Llinares, J. A. Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and V. Climente-Alarcon, "Induction motor diagnosis based on a transient current analytic wavelet transform via frequency B-splines," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1530-1544, May 2011.
38. J. Antonino-Daviu, S. Aviyente, E. Strangas, and M. Riera-Guasp, "A scale invariant algorithm for the automatic diagnosis of rotor bar failures in induction motors," in Proc. IEEE Int. Symp. Ind. Electron. (ISIE), Gdansk, Poland, 2011, pp. 496-501.
39. E. Rivas, J. C. Burgos, and J. C. Garcia-Prada, "Vibration analysis using envelope wavelet for detecting faults in the OLTC tap selector," IEEE Trans. Power Del., vol. 25, no. 3, pp. 1629-1636, Jul. 2010.
40. J. G. Proakis and D. G. Manolakis, Digital Signal Processing Principles, Algorithms, and Applications. Upper Saddle River, NJ: Prentice-Hall, 2006.
41. L. Cohen, Time-Frequency Analysis. Englewood Cliffs, NJ: Prentice-Hall, 1995.
42. E. G. Strangas, S. Aviyente, and S. S. H. Zaidi, "Time-Frequency analysis for efficient fault diagnosis and failure prognosis for interior permanent-magnet AC motors," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4191-4199, Dec. 2008.
43. G. A. Kaiser, Friendly Guide to Wavelets. Boston, MA, USA: Birkhäuser, 1994.
44. S. Mallat, A Wavelet Tour of Signal Processing, The Sparse Way, 3rd ed. Burlington, MA: Elsevier, 2009.
45. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche-Panadero, and J. Perez-Cruz, "A general approach for the transient detection of slip-dependent faults components based on the discrete wavelet transform," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4167-4180, Dec. 2008.
46. T. W. Chua, W. W. Tan, Z.-X. Wang, and C. S. Chang, "Hybrid time-frequency domain analysis for inverter-fed inductionmotor fault detection," in Proc. IEEE Int. Symp. Ind. Electron. (ISIE), Bari, Italy, 2010, pp. 1633-1638.
47. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Practical aspects of mixed-eccentricity detection in PWM voltage-source-inverter-fed induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 252-262, Jan. 2010.
48. C. Rodriguez-Donate, L. M. Morales-Velazquez, R. A. Osornio-Rios, G. Herrera-Ruiz, and R. J. Romero-Troncoso, "FPGA-based fused smart sensor for dynamic and vibration parameter extraction in industrial robot links," Sensors-Basel, vol. 10, pp. 4114-4129, Apr. 2010.