Detection of induction motor faults in inverter drives using inverter input current analysis

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 9, 2011, Pages 4365-4373

  Georgakopoulos, Ilias P ^a   Mitronikas, Epaminondas D ^a   Safacas, Athanasios N ^a  

^a UNIVERSITY OF PATRAS   (Greece)

Author keywords

Fault diagnosis; induction motors; inverter; spectral analysis; wavelet

Indexed keywords

AC-GRID; BROKEN ROTOR BAR; COMMON FAULTS; CONTROLLED VARIABLES; DIAGNOSTIC METHODS; FAULT CONDITIONS; FAULT DETECTION AND CLASSIFICATION; FREQUENCY COMPONENTS; INDUCTION MOTOR DRIVE; INDUSTRIAL DRIVES; INPUT CURRENT; INVERTER; INVERTER-DRIVEN MOTORS; LOW LOAD; OPEN LOOPS; SQUIRREL CAGE INDUCTION MOTOR; STATOR CURRENTS; TRANSIENT OPERATION; WAVELET;

DRIVES; ELECTRIC DRIVES; ELECTRIC FAULT CURRENTS; FAULT DETECTION; SPECTRUM ANALYSIS; SQUIRREL CAGE MOTORS;

AC GENERATOR MOTORS;

EID: 80051710796     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2093476     Document Type: Article

References (44)

1. A. Khezzar, M. El Kamel Oumaamar, M. Hadjami, M. Boucherma, and H. Razik, "Induction motor diagnosis using line neutral voltage signatures", IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4581-4591, Nov. 2009.
2. Z. Liu, X. Yin, Z. Zhang, D. Chen, and W. Chen, "Online rotor mixed fault diagnosis way based on spectrum analysis of instantaneous power in squirrel cage induction motors", IEEE Trans. Energy Convers., vol. 19, no. 3, pp. 485-490, Sep. 2004.
3. M. El Kamel Oumaamar, F. Babaa, A. Khezzar, and M. Boucherma, "Diagnostics of broken rotor bars in induction machines using the neutral voltage", in Conf. Rec. ICEM, Chania, Greece, Sep. 2006.
4. J. S. Hsu, "Monitoring of defects in induction motors through air-gap torque observation", IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1016-1021, Sep. 1995.
5. A. Ibrahim, M. El Badaoui, F. Guillet, and F. Bonnardot, "A new bearing fault detection method in induction machines based on instantaneous power factor", IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4252-4259, Dec. 2008.
6. F. Briz, M. W. Degner, P. García, and A. B. Diez, "Induction machine diagnostics using zero sequence components", in Conf. Rec. IEEE IAS Annu. Meeting, 2005, vol. 1, pp. 34-41. (Pubitemid 44042428)
7. M. Drif and A. J. Marques Cardoso, "Instantaneous real power signature analysis as a tool for airgap eccentricity diagnostics in three-phase induction motors", in Conf. Rec. ICEM, Chania, Greece, Sep. 2006.
8. A. Stavrou, "Impedance vector monitoring strategy for on-line detection of eccentricity in induction motors", in Conf. Rec. ICEM, Chania, Greece, Sep. 2006.
9. J. Kappatou, C. Marchand, and A. Razek, "Induction machine analysis for the diagnosis of rotor faults using the leakage magnetic field", in Proc. XVII ICEM, Chania, Greece, Sep. 2-5, 2006.
10. M. El Hachemi Benbouzid, "A review of induction motors signature analysis as a medium for faults detection", IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, Oct. 2000.
11. M. El Hachemi Benbouzid and G. B. Kliman, "What stator current processing-based technique to use for induction motor rotor faults diagnosis?", IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 238-244, Jun. 2003.
12. J. A. Antonino-Daviu, P. J. Rodrvguez, M. Riera-Guasp, A. Arkkio, and J. Roger-Folch, "Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines", in Conf. Rec. ICEM, Chania, Greece, Sep. 2006.
13. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "AI techniques in induction machines diagnosis including the speed ripple effect", IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 98-108, Jan./Feb. 1998. (Pubitemid 128739701)
14. S. Williamson and A. Smith, "Steady-state analysis of 3-phase cage motors with rotor-bar and end-ring faults", Proc. Inst. Elect. Eng., vol. 129, pt. B, no. 3, pp. 93-100, May 1982. (Pubitemid 12533218)
15. D. J. Tilak Siyambalapitya, P. G. McLaren, and P. P. Acarnley, "A rotor condition monitor for squirrel-cage induction machines", IEEE Trans. Ind. Appl., vol. IA-23, no. 2, pp. 334-340, Mar. 1987.
16. N. M. Elkasabgy, A. R. Eastham, and G. E. Dawson, "Detection of broken bars in the cage rotor on an induction machine", IEEE Trans. Ind. Appl., vol. 28, no. 1, pp. 165-171, Jan. 1992.
17. J. Gyselinck, J. Sprooten, and X. M. López-Fernández, "Multi-slice FE modelling of induction motors having a broken bar-influence of inter-bar currents and bar breakage location", in Conf. Rec. ICEM, Chania, Greece, Sep. 2006.
18. J. Faiz and B. M. Ebrahimi, "Locating rotor broken bars in induction motors using finite element method", Energy Convers. Manage., vol. 50, no. 1, pp. 125-131, Jan. 2009.
19. S. M. A. Cruz and A. J. M. Cardoso, "Rotor cage fault diagnosis in three-phase induction motors by extended Park's vector approach", Elect. Mach. Power Syst., vol. 28, pp. 289-299, 2000.
20. C. Kral, T. G. Habetler, and R. G. Harley, "Detection of mechanical imbalances of induction machines without spectral analysis of time-domain signals", IEEE Trans. Ind. Appl., vol. 40, no. 4, pp. 1101-1106, Jul. 2004.
21. I. P. Tsoumas, "Dynamic analysis of the subsynchronous cascade drive and development of fault diagnosis methods", Ph. D. dissertation, Univ. Patras, Patras, Greece, Aug., 2007.
22. W. T. Thomson and A. Barbour, "On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors", IEEE Trans. Energy Convers., vol. 13, no. 4, pp. 347-357, Dec. 1998.
23. W. T. Thomson, D. Rankin, and D. G. Dorrell, "On-line current monitoring to diagnose airgap eccentricity in large three-phase induction motors-industrial case histories verify the predictions", IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 1372-1378, Dec. 1999. (Pubitemid 30540951)
24. S. Nandi, S. Ahmed, and H. A. Toliyat, "Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages", IEEE Trans. Energy Convers., vol. 16, no. 3, pp. 253-260, Sep. 2001. (Pubitemid 32780118)
25. S. Nandi, R. M. Bharadwaj, and H. A. Toliyat, "Performance analysis of a three-phase induction motor under mixed eccentricity condition", IEEE Trans. Energy Convers., vol. 17, no. 3, pp. 392-399, Sep. 2002. (Pubitemid 35151676)
26. J. Faiz, I. Tabatabaei, and E. Sharifi-Ghazvini, "A precise electromagnetic modeling and performance analysis of a three phase squirrel cage induction motor under mixed eccentricity condition", Electromagnetics, vol. 24, no. 6, pp. 471-489, 2004.
27. M. Eltabach, A. Charara, and I. Zein, "A comparison of external and internal methods of signal spectral analysis for broken rotor bars detection in induction motors", IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 107-121, Feb. 2004.
28. C. Kral and F. Pirker, "Vienna monitoring method-Detection of faulty rotor bars by means of a portable measurement system", in Proc. ICEM, Espoo, Finland, Aug. 2000.
29. C. Kral, F. Pirker, G. Pascoli, and W. Berghold, "A Labview based rotor fault diagnostics tool for inverter fed induction machines by means of the Vienna monitoring method at variable speed", in Proc. CIEP, Acapulco, Mexico, Oct. 2000, pp. 324-329. (Pubitemid 32138123)
30. G. Bossio, C. De Angelo, J. Solsona, G. O. García, and M. I. Valla, "Application of an additional excitation in inverter-fed induction motors for air-gap eccentricity diagnosis", IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 839-847, Dec. 2006. (Pubitemid 44824168)
31. R. Wieser, C. Kral, F. Pinker, and M. Schagginger, "On-line rotor cage monitoring of inverter-fed induction machines by means of an improved method", IEEE Trans. Power Electron., vol. 14, no. 5, pp. 858-865, Sep. 1999. (Pubitemid 30503477)
32. C. Kral, R. Wieser, F. Pinker, and M. Schagginger, "Sequences of field oriented control for the detection of faulty rotor bars in induction machines. The Vienna monitoring method", IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1042-1050, Oct. 2000.
33. A. Bellini, F. Filippetti, G. Franceschini, and C. Tassoni, "Closed-loop control impact on the diagnosis of induction motors faults", IEEE Trans. Ind. Appl., vol. 36, no. 5, pp. 1318-1329, Sep./Oct. 2000.
34. A. Stefani, A. Bellini, and F. Filippetti, "Diagnosis of induction machines' rotor faults in time-varying conditions", IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4548-4556, Nov. 2009.
35. I. P. Georgakopoulos, E. D. Mitronikas, and A. N. Safacas, "Condition monitoring of an inverter-driven induction motor using wavelets", in Proc. ELECTROMOTION, Lille, France, Jul. 1-3, 2009, pp. 1-5.
36. I. P. Georgakopoulos, E. D. Mitronikas, A. N. Safacas, and I. P. Tsoumas, "Detection of eccentricity in inverter-fed induction machines using wavelet analysis of the stator current", in Proc. IEEE Power Electron. Spec. Conf., Rhodes Island, Greece, Jun. 15-19, 2008, pp. 487-492.
37. B.-K. Lee and M. Ehsani, "A simplified functional model for 3-phase voltage source inverter using switching function concept", IEEE Trans. Ind. Electron., vol. 48, no. 2, pp. 309-321, Apr. 2001. (Pubitemid 32416258)
38. P. D. Ziogas and P. N. D. Photiadis, "An exact input current analysis of ideal static PWM inverters", IEEE Trans. Ind. Appl., vol. IA-19, no. 2, pp. 281-295, Mar./Apr. 1983.
39. P. D. Ziogas, E. P. Wiechmann, and V. R. Stefanovic, "A computer-aided analysis and design approach for static voltage source inverters", IEEE Trans. Ind. Appl., vol. IA-21, no. 5, pp. 1234-1241, Sep./Oct. 1985.
40. D. G. Dorrell, W. T. Thomson, and S. Roach, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors", IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 24-34, Jan. 1997.
41. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Practical aspects of mixed-eccentricity detection in PWM voltage-source-inverter-fed induction motors", IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 252-262, Jan. 2010.
42. IMechE (Institution of Mechanical Engineers), Vibrations in Rotating Machinery. London, U. K.: Imeche Event Publications, 2004.
43. M. Riera-Guasp, J. A. Antonino-Daviu, J. Roger-Folch, and M. P. Molina Palomares, "The use of the wavelet approximation signal as a tool for the diagnosis of rotor bar failures", IEEE Trans. Ind. Appl., vol. 44, no. 3, pp. 716-726, May/Jun. 2008. (Pubitemid 351796118)
44. M. Pineda-Sanchez, M. Riera-Guasp, J. A. Antonino-Daviu, J. Roger-Folch, J. Perez-Cruz, and R. Puche-Panadero, "Instantaneous frequency of the left sideband harmonic during the start-up transient: A new method for diagnosis of broken bars", IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4557-4570, Nov. 2009.