FPGA-based multiple-channel vibration analyzer for industrial applications in induction motor failure detection

IEEE Transactions on Instrumentation and Measurement

Volumn 59, Issue 1, 2010, Pages 63-72

  Contreras Medina, Luis Miguel ^a   Romero Troncoso, Rene De Jesus ^a   Cabal Yepez, Eduardo ^a   Rangel Magdaleno, Jose De Jesus ^b   Millan Almaraz, Jesus Roberto ^b  

^a UNIVERSITY OF GUANAJUATO   (Mexico)

^b UNIVERSIDAD AUTÓNOMA DE QUERÉTARO   (Mexico)

Author keywords

Failure detection; Field programmable gate arrays (FPGAs); Induction motors; Monitoring; Vibration analysis

Indexed keywords

AUTOMATIC DIAGNOSIS; BROKEN BAR; CONTINUOUS MONITORING; EARLY DETECTION; EARLY FAILURE DETECTION; FAILURE DETECTION; FIELD-PROGRAMMABLE GATE ARRAYS (FPGAS); FREQUENCY DOMAINS; MOTOR FAILURE; MOTOR STATE; MULTI-CHANNEL; MULTICHANNEL ANALYSIS; MULTICHANNEL MEASUREMENT; MULTIPLE-CHANNEL; ONLINE CONTINUOUS MONITORING; RECONFIGURABLE DEVICES; TRAINED STAFF; VIBRATION ANALYZER;

COST BENEFIT ANALYSIS; FAILURE ANALYSIS; FIELD PROGRAMMABLE GATE ARRAYS (FPGA); FREQUENCY DOMAIN ANALYSIS; INDUSTRIAL APPLICATIONS; LOGIC GATES; MONITORING; MOTORS; PARALLEL ARCHITECTURES; QUALITY ASSURANCE; VIBRATION ANALYSIS;

INDUCTION MOTORS;

EID: 72349091515     PISSN: 00189456     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIM.2009.2021642     Document Type: Conference Paper

References (26)

1. J. Ilonen, J. Kamarainen, T. Lindh, J. Ahola, H. Kalvianen, and J. Partanen, "Diagnosis tool for motor condition monitoring," IEEE Trans. Instrum. Meas., vol. 47, no. 4, pp. 963-971, Jul./Aug. 2005. (Pubitemid 41135847)
2. G. K. Sing and S. A. K. S. Ahmed, "Vibration signal analysis using wavelet transform for isolation and identification of electrical faults in induction machine," Elect. Power Syst. Res., vol. 68, no. 2, pp. 119-136, Feb. 2003.
3. S. A. Ansari and R. Baig, "A PC-based vibration analyzer for condition monitoring of process machinery," IEEE Trans. Instrum. Meas., vol. 47, no. 2, pp. 378-383, Apr. 1998.
4. P. Bilski and W. Winiecki, "Virtual spectrum analyzer based on data acquisition card," IEEE Trans. Instrum. Meas., vol. 51, no. 1, pp. 82-87, Feb. 2002.
5. P. Bilski and W. Winiecki, "A low-cost real-time virtual spectrum analyzer," IEEE Trans. Instrum. Meas., vol. 56, no. 6, pp. 2169-2174, Dec. 2007.
6. G. Betta, C. Liguori, and A. Pietrosanto, "A multi-application FFT analyzer based on DSP architecture," IEEE Trans. Instrum. Meas., vol. 50, no. 3, pp. 825-832, Jun. 2001.
7. G. Betta, M. D'Apuzzo, C. Ligouri, and A. Pietrosanto, "An intelligent FFT-analyzer," IEEE Trans. Instrum. Meas., vol. 47, no. 5, pp. 1173-1179, Oct. 1998.
8. G. Betta, C. Ligouri, A. Paolillo, and A. Pietrosanto, "A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis," IEEE Trans. Instrum. Meas., vol. 51, no. 6, pp. 1316-1322, Dec. 2002.
9. J. A. Vite-Frias, R. J. Romero-Troncoso, and A. Ordaz-Moreno, "VHDL core for 1024-point radix-4 FFT computation," in Proc. Int. Conf. ReCon-Fig, Puebla, Mexico, 2005, p. 24.
10. L. M. Contreras-Medina, R. J. Romero-Troncoso, J. R. Millan-Almaraz, and C. Rodriguez-Donate, "FPGA based multiple-channel vibration analyzer embedded system for industrial application in automatic failure detection," in Proc. SIES, Montpellier, France, Jun. 2008, pp. 229-232.
11. J. Proakis and D. Manolakis, Digital Signal Processing: Principles, Algorithms and Applications. Englewood Cliffs, NJ: Prentice-Hall, 1995.
12. M. Aiello, A. Cataliotti, and S. Nuccio, "A comparison of spectrum estimation techniques for nonstationary signals in induction motor drive measurements," IEEE Trans. Instrum. Meas., vol. 54, no. 6, pp. 2264-2271, Dec. 2005.
13. B. Ayhan, M. Chow, and M. Song, "Multiple signature processing-based fault detection schemes for broken rotor bar in induction motors," IEEE Trans. Energy Convers., vol. 20, no. 2, pp. 336-343, Jun. 2005.
14. M. El Hachemi Benbouzid, "A review of induction motors signature analysis as medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-992, Oct. 2000.
15. F. Ponci, A. Monti, L. Cristaldi, and M. Lazzaroni, "Diagnostic of faulty induction motor drive via wavelet decomposition," IEEE Trans. Instrum. Meas., vol. 56, no. 6, pp. 2606-2615, Dec. 2007.
16. A. Ordaz-Moreno, R. J. Romero-Troncoso, J. A. Vite-Frias, J. R. Rivera-Guillen, and A. Garcia-Perez, "Automatic online diagnosis algorithm for broken-bar detection on induction motors based on discrete wavelet transform for FPGA implementation," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 2193-2202, May 2008.
17. J. J. Rangel-Magdaleno, R. J. Romero-Troncoso, L. M. Contreras-Medina, and A. Garcia-Perez, "FPGA implementation of a novel algorithm for on-line bar breakage detection on induction motors," in Proc. IMTC, Victoria, BC, Canada, May 2008, pp. 720-725.
18. C. Rodriguez-Donate, R. J. Romero-Troncoso, A. Garcia-Perez, and D. A. Razo-Montes, "FPGA based embedded system for induction motor failure monitoring at the start-up transient vibrations with wavelets," in Proc. SIES, Montpellier, France, Jun. 2008, pp. 208-214.
19. S. A. S. A. Kazzaz and G. K. Singh, "Experimental investigations on induction machine condition monitoring and fault diagnosis using digital signal processing techniques," Elect. Power Syst. Res., vol. 65, no. 3, pp. 197-221, Jun. 2003.
20. P. J. Tavner and Penman, Condition Monitoring of Electrical Machines. Chichester, U.K.: Wiley, 1987.
21. M. Neale and J. R. Cameron, A Guide to the Condition Monitoring of Machinery. London, U.K.: HMSO Publications, 1979.
22. R. A. Collacot, Vibration Monitoring and Diagnosis. London, U.K.: George Godwin Ltd., 1979.
23. H. Bloch and F. K. Geither, Machinery Failure Analysis and Troubleshooting. Houston, TX: Gulf Publishing Company, 1990.
24. N. Roy, P. Purkait, and K. Bhattacharya, "Application of wavelet and Fourier transform for vibration analysis of motor," in Proc. Annu. IEEE INDICON, Chennai, India, Dec. 2005, pp. 609-613.
25. STMicroelectronics Data Sheet LIS3L02ASA, STMicroelectronics Company, Geneva, Switzerland, 2005.
26. Texas Instruments Data Sheet ADS7841, Burr-Brown Division, Texas Instrum., Dallas, TX, 1998.