Practical aspects of mixed-eccentricity detection in PWM voltage-source-inverter-fed induction motors

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 1, 2010, Pages 252-262

  Morinigo Sotelo, Daniel ^a,b   Garcia Escudero, L A ^a   Duque Perez, Oscar ^a   Perez Alonso, Marcelo ^a,c,d  

^a UNIVERSITY OF VALLADOLID   (Spain)

^b FOUNDATION FOR RESEARCH AND DEVELOPMENT IN TRANSPORT AND ENERGY   (Spain)

^c Renfe Operadora   (Spain)

^d UNIVERSIDAD ANTONIO DE NEBRIJA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CAGE INDUCTION MOTORS; INVERTER-FED INDUCTION MOTORS; MIXED ECCENTRICITY; SPECTRAL ANALYSIS; STATISTICAL ANALYSIS; SUPPLY SOURCES; UTILITY VOLTAGES; VOLTAGE CONVERTER; VOLTAGE SOURCE;

MOTORS; SPECTRUM ANALYSIS; SPECTRUM ANALYZERS;

INDUCTION MOTORS;

EID: 72749127856     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2024654     Document Type: Article

References (53)

1. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Some practical aspects of eccentricity detection in induction motors for different supply conditions," in Proc. 18th ICEM, Vilamoura, Portugal, Sep. 2008, pp. 1-4.
2. J. Faiz and M. Ojaghi, "Different indexes for eccentricity faults diagnosis in three-phase squirrel-cage induction motors: A review," Mechatronics, vol.19, no.1, pp. 2-13, Feb. 2009.
3. L. Xiaodong, W. Qing, and S. Nandi, "Performance analysis of a threephase induction machine with inclined static eccentricity," IEEE Trans. Ind. Appl., vol.43, no.2, pp. 531-541, Mar./Apr. 2007.
4. P. Jover-Rodriguez, A. Belahcen, A. Arkkio, A. Laiho, and J. Antonino-Daviu, "Air-gap force distribution and vibration pattern of induction motors under dynamic eccentricity," Elect. Eng., vol.90, no.3, pp. 209-218, Feb. 2008.
5. D. G. Dorrell, W. T. Thomson, and S. Roach, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Trans. Ind. Appl., vol.33, no.1, pp. 24-34, Jan./Feb. 1997.
6. J. R. Cameron, W. T. Thomson, and A. B. Dow, "Vibration and current monitoring for detecting airgap eccentricity in large induction motors," in Proc. Inst. Elect. Eng. B-Elect. Power Appl., May 1986, vol.133, no.3, pp. 155-163.
7. N. A. Al-Nuaim and H. Toliyat, "A novel method for modeling dynamic air-gap eccentricity in synchronous machines based on modified winding function theory," IEEE Trans. Energy Convers., vol.13, no.2, pp. 156-162, Jun. 1998.
8. D. G. Dorrell, W. T. Thomson, and S. Roach, "Combined effects of static and dynamic eccentricity on airgap flux waves and the application of current monitoring to detect dynamic eccentricity in 3-phase induction motors," in Proc. 7th Int. Conf. Elect. Mach. Drives, 1995, pp. 151-155.
9. W. T. Thomson, D. Rankin, and D. G. Dorrell, "On-line current monitoring to diagnose airgap eccentricity in large three-phase induction motors-Industrial case histories verify the predictions," IEEE Trans. Energy Convers., vol.14, no.4, pp. 1372-1378, Dec. 1999.
10. B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, "Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis," IEEE Trans. Ind. Electron., vol.55, no.2, pp. 610-619, Feb. 2008.
11. R. R. Obaid, T. G. Habetler, and R. M. Tallam, "Detecting load unbalance and shaft misalignment using stator current in inverter-driven induction motors," in Proc. IEMDC, Torrance, CA, Jun. 2003, vol.3, pp. 1454-1458.
12. R. R. Schoen and T. G. Habetler, "Effects of time-varying loads on rotor fault detection in induction machines," IEEE Trans. Ind. Appl., vol.31, no.4, pp. 900-906, Jul./Aug. 1995.
13. S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, "Analytic-wavelet-ridge-based detection of dynamic eccentricity in Brushless Direct Current (BLDC) motors functioning under dynamic operating conditions," IEEE Trans. Ind. Electron., vol.54, no.3, pp. 1410-1419, Jun. 2007.
14. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors- A review," IEEE Trans. Energy Convers., vol.20, no.4, pp. 719-729, Dec. 2005.
15. M. E. H. Benbouzid, "Bibliography on induction motors faults detection and diagnosis," IEEE Trans. Energy Convers., vol.14, no.4, pp. 1065-1074, Dec. 1999.
16. W. T. Thomson, "A review of on-line condition monitoring techniques for three phase squirrel induction motors-Past, present and future," in Proc. IEEE Int. Symp. Diagnostics Elect. Mach., Power Electron. Drives, 1999, pp. 3-18.
17. G. K. Singh and S. A. S. A. Kazzaz, "Induction machine drive condition monitoring and diagnostic research- A survey," Elect. Power Syst. Res., vol.64, no.2, pp. 145-158, Feb. 2003.
18. G. K. Singh and S. A. K. S. Ahmed, "Vibration signal analysis using wavelet transform for isolation and identification of electrical faults in induction machine," Elect. Power Syst. Res., vol.68, no.2, pp. 119-136, Feb. 2003.
19. A. K. Sen and A. S. R. Murty, "Parallel processing application in traction motor fault diagnosis," Elect. Power Syst. Res., vol.52, no.3, pp. 241-249, Dec. 1, 1999.
20. M. E. H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol.47, no.5, pp. 984-993, Oct. 2000.
21. M. E. H. Benbouzid and G. B. Kliman, "What stator current processingbased technique to use for induction motor rotor faults diagnosis?"IEEE Trans. Energy Convers., vol.18, no.2, pp. 238-244, Jun. 2003.
22. J.-H. Jung, J.-J. Lee, and B.-H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol.53, no.6, pp. 1842-1852, Dec. 2006.
23. A. Bellini, A. Yazidi, F. Filippetti, C. Rossi, and G. A. Capolino, "High frequency resolution techniques for rotor fault detection of induction machines," IEEE Trans. Ind. Electron., vol.55, no.12, pp. 4200-4209, Dec. 2008.
24. J. Antonino-Daviu, P. Jover-Rodriguez, M. Riera-Guasp, A. Arkkio, and J. Roger-Folch, "DWT analysis of numerical and experimental data for the diagnosis of dynamic eccentricities in induction motors," Mech. Syst. Signal Process., vol.21, no.6, pp. 2575-2589, Aug. 2007.
25. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche-Panadero, and J. Perez-Cruz, "A general approach for the transient detection of slip-dependent fault components based on the discrete wavelet transform," IEEE Trans. Ind. Electron., vol.55, no.12, pp. 4167-4180, Dec. 2008.
26. J. Milimonfared, H. M. Kelk, S. Nandi, A. D. Minassians, and H. Toliyat, "A novel approach for broken-rotor-bar detection in cage induction motors," IEEE Trans. Ind. Appl., vol.35, no.5, pp. 1000-1006, Sep./Oct. 1999.
27. J. Antonino-Daviu, M. Riera-Guasp, J. Roger-Folch, and M. Molina, "Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machines," IEEE Trans. Ind. Appl., vol.42, no.4, pp. 990-996, Jul./Aug. 2006.
28. H. Douglas, P. Pillay, and A. Ziarani, "Broken rotor bar detection in induction machines with transient operating speeds," IEEE Trans. Energy Convers., vol.20, no.1, pp. 135-141, Mar. 2005.
29. S. Nandi, S. Ahmed, and H. A. Toliyat, "Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages," IEEE Trans. Energy Convers., vol.16, no.3, pp. 253-260, Sep. 2001.
30. M. Sahraoui, A. Ghoggal, S. E. Zouzou, and M. E. Benbouzid, "Dynamic eccentricity in squirrel cage induction motors-Simulation and analytical study of its spectral signatures on stator currents," Simul. Model. Pract. Theory, vol.16, no.9, pp. 1503-1513, Oct. 2008.
31. I. Boldea and S. A. Nasar, Electric Drives. Boca Raton, FL: CRC Press, 1999.
32. X. Huang, T. G. Habetler, and R. G. Harley, "Detection of rotor eccentricity faults in a closed-loop drive-connected induction motor using an artificial neural network," IEEE Trans. Power Electron., vol.22, no.4, pp. 1552-1559, Jul. 2007.
33. X. Huang, T. G. Habetler, and R. G. Harley, "Analysis, simulation, and experiments of rotor eccentricity in closed-loop drive-connected induction motors," in Proc. 5th IEEE Int. SDEMPED, Vienna, Austria, Sep. 2005, pp. 1-6.
34. G. K. Singh, "A research survey of induction motor operation with nonsinusoidal supply wave forms," Elect. Power Syst. Res., vol. 75, no. 2/3, pp. 200-213, Aug. 2005.
35. F. Zidani, D. Diallo, M. E. H. Benbouzid, and R. Nait-Said, "A fuzzybased approach for the diagnosis of fault modes in a voltage-fed PWM inverter induction motor drive," IEEE Trans. Ind. Electron., vol.55, no.2, pp. 586-593, Feb. 2008.
36. C. Bruzzese, "Analysis and application of particular current signatures (symptoms) for cage monitoring in nonsinusoidally fed motors with high rejection to drive load, inertia, and frequency variations," IEEE Trans. Ind. Electron., vol.55, no.12, pp. 4137-4155, Dec. 2008.
37. A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol.55, no.12, pp. 4109-4126, Dec. 2008.
38. A. H. Bonnett, "Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors," IEEE Trans. Ind. Appl., vol.32, no.2, pp. 386-392, Mar./Apr. 1996.
39. F. Briz, M.W. Degner, P. Garcia, and A. B. Diez, "High-frequency carriersignal voltage selection for stator winding fault diagnosis in inverter-fed AC machines," IEEE Trans. Ind. Electron., vol.55, no.12, pp. 4181-4190, Dec. 2008.
40. B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, "Phase-sensitive detection of motor fault signatures in the presence of noise," IEEE Trans. Ind. Electron., vol.55, no.6, pp. 2539-2550, Jun. 2008.
41. R. M. Tallam, T. G. Habetler, and R. G. Harley, "Stator winding turn-fault detection for closed-loop induction motor drives," IEEE Trans. Ind. Appl., vol.39, no.3, pp. 720-724, May/Jun. 2003.
42. T. M. Wolbank, K. A. Loparo, and R. Wohrnschimmel, "Inverter statistics for online detection of stator asymmetries in inverter-fed induction motors," IEEE Trans. Ind. Appl., vol.39, no.4, pp. 1102-1108, Jul./Aug. 2003.
43. R. Wieser, C. Kral, F. Pirker, and M. Schagginger, "On-line rotor cage monitoring of inverter-fed induction machines by means of an improved method," IEEE Trans. Power Electron., vol.14, no.5, pp. 858-865, Sep. 1999.
44. O. Duque, M. Perez, and D. Morinigo, "Detection of bearing faults in cage induction motors fed by frequency converter using spectral analysis of line current," in Proc. IEEE IEMDC, San Antonio, TX, May 2005, pp. 17-22.
45. G. R. Bossio, C. H. D. Angelo, G. O. Garcia, J. A. Solsona, and M. I. Valla, "Effects of rotor bar and end-ring faults over the signals of a position estimation strategy for induction motors," IEEE Trans. Ind. Appl., vol.41, no.4, pp. 1005-1012, Jul./Aug. 2005.
46. J. Yang, S. B. Lee, J. Yoo, S. Lee, Y. Oh, and C. Choi, "A stator winding insulation condition monitoring technique for inverter-fed machines," IEEE Trans. Power Electron., vol.22, no.5, pp. 2026-2033, Sep. 2007.
47. O. Duque-Perez, M. Perez-Alonso, and D. Morinigo-Sotelo, "Practical application of the spectral analysis of line current for the detection of mixed eccentricity in cage induction motors fed by frequency converter," in Proc. 16th ICEM04, Cracow, Poland, 2004.
48. O. Duque-Perez and M. Perez-Alonso, (in Spanish), Induction Motors: Predictive Maintenance Techniques. Badajoz, Spain: Abecedario, 2005.
49. A. Tenhunen, T. Benedetti, T. P. Holopainen, and A. Arkkio, "Electromagnetic forces in cage induction motors with rotor eccentricity," in Proc. IEEE IEMDC, Torrance, CA, Jun. 2003, vol.3, pp. 1616-1622.
50. A. Ghoggal, S. E. Zouzou, H. Razik, M. Sahraoui, and A. Khezzar, "An improved model of induction motors for diagnosis purposes-Slot skewing effect and air-gap eccentricity faults," Energy Convers. Manage., vol.50, no.5, pp. 1336-1347, May. 2009.
51. H. DeGersem and T. Weiland, "Eccentric air-gap element for transient finite-element machine simulation," Compel-Int. J. Comput. Math. Elect. Electron. Eng., vol.25, no.2, pp. 344-356, 2006.
52. J. Ilonen, J. K. Kamarainen, T. Lindh, J. Ahola, H. Kalviainen, and J. Partanen, "Diagnosis tool for motor condition monitoring," IEEE Trans. Ind. Appl., vol.41, no.4, pp. 963-971, Jul./Aug. 2005.
53. R. Yacamini and S. C. Chang, "Noise and vibration from induction machines fed from harmonic sources," IEEE Trans. Energy Convers., vol.10, no.2, pp. 286-292, Jun. 1995.