Nano-groove and 3D fabrication by controlled avalanche using femtosecond laser pulses

Optical Materials Express

Volumn 3, Issue 10, 2013, Pages 1674-1686

  Buividas, Ričardas ^a   Rekštyte, Sima ^b   Malinauskas, Mangirdas ^b   Juodkazis, Saulius ^a  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

^b VILNIUS UNIVERSITY   (Lithuania)

Author keywords

[No Author keywords available]

Indexed keywords

3D FABRICATION; 3D STRUCTURE; CONTROLLED AVALANCHE; LASER SCANS; RIPPLE FORMATION; SUB-100 NM; TWO PHOTON;

IONIZATION; SAPPHIRE; SILICONES; SOL-GELS; THREE DIMENSIONAL;

ULTRASHORT PULSES;

EID: 84888024583     PISSN: None     EISSN: 21593930     Source Type: Journal    
DOI: 10.1364/OME.3.001674     Document Type: Article

References (53)

1. S. Maruo and K. Ikuta, "Three-dimensional microfabrication by use of single-photon-absorbed polymerization," Appl. Phys. Lett. 76, 2656-2658 (2000).
2. C.Y. Liao, M. Bouriauand, P. L. Baldeck, J.-C. Léon, C. Masclet, and T.-T. Chung, "Two-dimensional slicing method to speed up the fabrication of microobjects based on two-photon polymerization," Appl. Phys. Lett. 91, 033108 (2007).
3. M. Thiel, J. Fischer, G. von Freymann, and M. Wegener, "Direct laser writing of three-dimensional submicron structures using a continuous-wave laser at 532 nm," Appl. Phys. Lett. 97, 221102 (2010).
4. M. Malinauskas, P. Danilevicius, and S. Juodkazis, "Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses," Opt. Express 19, 5602-5610 (2011).
5. S. Maruo, O. Nakamura, and S. Kawata, "Three-dimensional microfabrication with two-photon-absorbed photopolymerization," Opt. Lett. 2, 132-134 (1997).
6. S. Kawata, H.-B. Sun, T. Tanaka, and K. Takada, "Finer features for functional microdevices," Nature 412, 697-698 (2001).
7. P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, "Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering," J. Biomed. Optics 17, 081405 (2012).
8. M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, "Mechanisms of threedimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses," Opt. Express 18, 10209-10221 (2010).
9. K. K. Seet, S. Juodkazis, V. Jarutis, and H. Misawa, "Feature-size reduction of photopolymerized structures by femtosecond optical curing of SU-8," Appl. Phys. Lett. 89, 024106 (2006).
10. M. Farsari and B. Chichkov, "Materials processing: Two-photon fabrication," Nature Photon. 3, 450-452 (2009).
11. A. Ovsianikov, J. Viertl, B. Chichkov, M. Oubaha, B. MacCraith, I. Sakellari, A. Giakoumaki, D.Gray, M. Vamvakaki, M. Farsari, and C. Fotakis, "Ultra-low shrinkage hybrid photosensitive material for multi-photon polymerization microfabrication," ACS Nano 2, 2257-2262 (2008).
12. J.F. Xing, X.Z. Dong, W.Q. Chen, X.-M. Duan, N. Takeyasu, T. Tanaka, and S. Kawata, "Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency," Appl. Phys. Lett. 90, 131106 (2007).
13. Q. Wu, Y. Ma, R. Fang, Y. Liao, Q. Yu, X. Chen, and K. Wang, "Femtosecond laser-induced periodic surface structure on diamond film," Appl. Phys. Lett. 82, 1703 (2003).
14. N. Yasumaru, K. Miyazaki, and J. Kiuchi, "Femtosecond-laser-induced nanostructure formed on hard thin films of TiN and DLC," Appl. Phys. A 76, 983-985 (2003).
15. A. Borowiec and H. Haugen, "Subwavelength ripple formation on the surfaces of compound semiconductors irradiated with femtosecond laser pulses," Appl. Phys. Lett. 82, 4462 (2003).
16. S. Sakabe, M. Hashida, S. Tokita, S. Namba, and K. Okamuro, "Mechanism for self-formation of periodic grating structures on metal surface by femtosecond laser pulse," Phys. Rev. B 79, 033409 (2009).
17. M. Hashida, Y. Ikuta, Y. Miyasaka, S. Tokita, and S. Sakabe, "Simple formula for the interspaces of periodic grating structures selforganized on metal surfaces by femtosecond laser ablation," Appl. Phys. Lett. 102, 174106 (2013).
18. Y. Shimotsuma, P. Kazansky, J. Qiu, and K. Hirao, "Self-organized nanogratings in glass irradiated by ultrashort light pulses," Phys. Review Lett. 91, 247405 (2003).
19. P. Rajeev, M. Gertsvolf, E. Simova, C. Hnatovsky, R. Taylor, V. Bhardwaj, D. Rayner, and P. Corkum, "Memory in nonlinear ionization of transparent solids," Phys. Rev. Lett. 97, 253001 (2006).
20. M. Birnbaum, "Semiconductor surface damage produced by ruby lasers," J. Appl. Phys. 36, 3688 (1965).
21. A. Ovsianikov, J. Viertl, B. Chichkov, M. Oubaha, B. MacCraith, I. Sakellari, A. Giakoumaki, D. Gray, M. Vamvakaki, M. Farsari, and C. Fotakis, "Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication," ACS Nano 2, 2257-2262 (2008).
22. A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, "Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications," Acta Biomater. 7, 967-974 (2011).
23. 3DPoli@gmail.com.
24. M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, "Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers," Lith. J. Phys. 50, 201-208 (2010).
25. E. G. Gamaly, Femtosecond Laser-Matter Interactions: Theory, Experiments and Applications (Pan Stanford Publishing, USA, 2011).
26. S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, "Recording and reading of three-dimensional optical memory in glasses," Appl. Phys. B 77, 361-368 (2003).
27. J. Sipe, J. Young, J. Preston, and H. Van Driel, "Laser-induced periodic surface structure. I. Theory," Phys. Rev. B 27, 1141-1154 (1983).
28. R. Buividas, T. Kudrius, R. Sliupas, L. Rosa, G. Slekys, S. Bagdonas, R. Rotomskis, and S. Juodkazis, "Ripplepatterned substrates for light enhancement applications," Proc. SPIE 7376, 737620 (2010).
29. R. A. Ganeev, M. Baba, T. Ozaki, and H. Kuroda, "Long- and short-period nanostructure formation on semiconductor surfaces at different ambient conditions," J. Opt. Soc. Am. B 27, 1077-1082 (2010).
30. R.Buividas, L. Rosa, R. Šliupas, T. Kudrius, G. Šlekys, V. Datsyuk, and S. Juodkazis, "Mechanism of fine ripple formation on surfaces of (semi)transparent materials via a half-wavelength cavity feedback," Nanotechnology 22, 055304 (2011).
31. L. P. R. Ramirez, M. Heinrich, S. Richter, F. Dreisow, R. Keil, A. V. Korovin, U. Peschel, S. Nolte, and A. Tünnermann, "Tuning the structural properties of femtosecond-laser-induced nanogratings," Appl. Phys. A 100, 1-6 (2010).
32. F. Liang, R. Vallee, and S. L. Chin, "Mechanism of nanograting formation on the surface of fused silica," Opt. Express 20, 4389-4396 (2012).
33. L. Bressel, D. de Ligny, C. Sonneville, V. Martinez, V. Mizeikis, R. Buividas, and S. Juodkazis, "Femtosecond laser induced density changes in GeO 2 and SiO 2 glasses: fictive temperature effect [Invited]," Opt. Mat. Express 1, 605 (2011).
34. B. Wu, M. Zhou, J. Li, X. Ye, G. Li, and L. Cai, "Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laser," Appl. Surf. Science 256, 61-66 (2009).
35. R. Buividas, P. R. Stoddart, and S. Juodkazis, "Laser fabricated ripple substrates for surface-enahnced Raman scattering," Annalen der Physik 524, L5-L10 (2012).
36. Y. Liao, Y. L. Shen, L. L. Qiao, D. P. Chen, Y. Cheng, K. Sugioka, and K. Midorikawa, "Femtosecond laser nanostructuring in porous glass with sub-50 nm feature sizes," Opt. Lett. 38, 187-189 (2013).
37. C. Hnatovsky, V. Shvedov, W. Krolikowski, and A. Rode, "Revealing local field structure of focused ultrashort pulses," Phys. Rev. Lett. 12, 123901 (2011).
38. R. Taylor, C. Hnatovsky, E. Simova, P. Rajeev, D. Rayner, and P. Corkum, "Femtosecond laser erasing and rewriting of self-organized planar nanocracks in fused silica glass," Opt. Lett. 32, 2888-2890 (2007).
39. R. Taylor, E. Simova, and C. Hnatovsky, "Creation of chiral structures inside fused silica glass," Opt. Lett. 33, 1312-1314 (2008).
40. K. Ueno, S. Juodkazis, T. Shibuya, V. Mizeikis, Y. Yokota, and H. Misawa, "Nano-particle-enhanced photopolymerization," J. Phys. Chem. C 113, 11720-11724 (2009).
41. J. Morikawa, E. Hayakawa, T. Hashimoto, R. Buividas, and S. Juodkazis, "Thermal imaging of a heat transport in regions structured by femtosecond laser," Opt. Express 19, 20542-20550 (2011).
42. J. Morikawa, A. Orie, T. Hashimoto, and S. Juodkazis, "Thermal and optical properties of the femtosecond-laserstructured and stress-induced birefringent regions of sapphire," Opt. Express 18, 8300-8310 (2010).
43. J. Morikawa, A. Orie, T. Hashimoto, and S. Juodkazis, "Thermal diffusivity in femtosecond-laser-structured micro-volumes of polymers," Appl. Phys. A. 98, 551-556 (2010).
44. J. Morikawa, A. Orie, T. Hashimoto, and S. Juodkazis, "Thermal and optical properties of femtosecond laserstructured PMMA," Appl. Phys. A 101, 27-31 (2010).
45. S. Rekštyte, M. Malinauskas, and S. Juodkazis, "Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds," Opt. Express 21, 17028 (2013).
46. S. Maruo, T. Hasegawa, and N. Yoshimura, "Single-anchor support and supercritical CO2 drying enable highprecision microfabrication of three-dimensional structures," Opt. Express 17, 20945-20951 (2009).
47. T. Kondo, S. Juodkazis, and H. Misawa, "Reduction of capillary force for high-aspect ratio nanofabrication," Appl. Phys. A 81, 1583-1586 (2005).
48. M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, "Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization," J. Opt. 12, 124010 (2010).
49. C. Coenjarts and C. Ober, "Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers," Chem. Mater. 16, 5556-5558 (2004).
50. M. Malinauskas, D. Baltriukiene, A. Kraniauskas, P. Danilevicius, R. Jarasiene, R. Sirmenis, A. Zukauskas, E. Balciunas, V. Purlys, R. Gadonas, V. Bukelskiene, V. Sirvydis, and A. Piskarskas, "In vitro and in vivo biocompatibility study on laser 3D microstructurable polymers." Appl. Phys. A 108, 751-759 (2012).
51. R. Houbertz, G. Domann, J. Schulz, B. Olsowski, L. Frohlich and W.-S. Kim, "Impact of photoinitiators on the photopolymerization and the optical properties of inorganicorganic hybrid polymers," Appl. Phys. Lett. 84, 1105-1107 (2004).
52. S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, "Mechanical properties and tuning of three-dimensional polymeric photonic crystals," Appl. Phys. Lett. 91, 241904 (2007).
53. K. Cicha, T. Koch, J. Torgersen, Z. Li, R. Liska, and J. Stampfl, "Youngs modulus measurement of two-photon polymerized micro-cantilevers by using nanoindentation equipment," J. Appl. Phys. 112, 094906 (2012).