Modeling and control strategy development of a parallel hybrid electric bus

International Journal of Automotive Technology

Volumn 14, Issue 6, 2013, Pages 971-985

  Ye, X ^a   Jin, Z ^a   Hu, X ^b,c   Li, Y ^a   Lu, Q ^a  

^a TSINGHUA UNIVERSITY   (China)

^b BEIJING INSTITUTE OF TECHNOLOGY   (China)

^c CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Energy management; Hybrid electric vehicle; Model based design; Powertrain control

Indexed keywords

AUTOMATIC MANUAL TRANSMISSIONS; COMPARISON WITH EXPERIMENTS; ENERGY MANAGEMENT STRATEGIES; EXPERIMENT VALIDATIONS; HYBRID-ELECTRIC POWERTRAIN; MODEL- BASED DESIGNS; MODELING AND CONTROL; SYSTEM ARCHITECTURES;

ENERGY MANAGEMENT; EXPERIMENTS; HYBRID VEHICLES; MATHEMATICAL MODELS; POWERTRAINS;

COMPUTER SIMULATION;

EID: 84887427662     PISSN: 12299138     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12239-013-0107-y     Document Type: Article

References (46)

1. Alt, B., Antritter, F., Svaricek, F. and Schultalbers, M. (2010). A model based control design approach for powertrain control of a parallel hybrid electric vehicle. At-Automatisierungstechnik, 58, 568-579.
2. Ambuhl, D., Sundstr, M. O., Sciarretta, A. and Guzzella, L. (2010). Explicit optimal control policy and its practical application for hybrid electric powertrains. Control Engineering Practice, 18, 1429-1439.
3. Bayindir, K. C., Gozukucuk, M. A. and Teke, A. (2011). A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units. Energy Conversion and Management, 52, 1305-1313.
4. Borhan, H., Vahidi, A., Phillips, A. M., Kuang, M. L., Kolmanovsky, I. V. and Di Cairano, S. (2012). MPC-based energy management of a power-split hybrid electric vehicle. IEEE Trans. Control Systems Technology, 20, 593-603.
5. Boukehili, A., Zhang, Y. T., Zhao, Q., Ni, C. Q., Su, H. F. and Huang, G. J. (2012). Hybrid vehicle power management modeling and refinement. Int. J. Automotive Technology13, 6, 987-998.
6. Butler, K. L., Ehsani, M. and Kamath, P. (1999). A matlab-based modeling and simulation package for electric and hybrid electric vehicle design. IEEE Trans. Vehicular Technology, 48, 1770-1778.
7. Dac Viet, N., Hofman, T., Steinbuch, M. and Serrarens, A. F. A. (2010). An optimal control-based algorithm for hybrid electric vehicle using preview route information. 2010 American Control Conf. - ACC 2010, IEEE, 5818-5823.
8. Debert, M., Padovani, T. M., Colin, G., Chamaillard, Y. and Guzzella, L. (2012). Implementation of comfort constraints in dynamic programming for hybrid vehicle energy management. J. Supercritical Fluids, 58, 367-386.
9. Delprat, S., Lauber, J., Guerra, T. M. and Rimaux, J. (2004). Control of a parallel hybrid powertrain: Optimal control. IEEE Trans. Vehicular Technology, 53, 872-881.
10. Filippa, M., Mi, C. T., Shen, J. and Stevenson, R. C. (2005). Modeling of a hybrid electric vehicle powertrain test cell using Bond graphs. IEEE Trans. Vehicular Technology, 54, 837-845.
11. Gao, J. P., Zhu, G. M. G., Strangas, E. G. and Sun, F. C. (2009). Equivalent fuel consumption optimal control of a series hybrid electric vehicle. Proc. Institution of Mechanical Engineers Part D-J. Automobile Engineering, 223, 1003-1018.
12. Garofalo, F., Glielmo, L., Iannelli, L. and Vasca, F. (2001). Smooth engagement for automotive dry clutch. In Decision and Control, 2001. Proc. 40th IEEE Conf. Decision and Control. IEEE, 1, 529-534.
13. Glielmo, L. and Vasca, F. (2000). Engagement control for automotive dry clutch. 2000 American Control Conf. ACC 2000. IEEE, 2, 1016-1017.
14. Han, S. B., Chang, Y. H., Lee, E. Y., Chung, Y. J. and Suh, B. (2010). Emissions simulation in a 7000 kg-grade diesel hybrid electric vehicle. Int. J. Automotive Technology11, 1, 105-110.
15. He, H. W., Liu, Z. T., Zhu, L. M. and Liu, X. L. (2012). Dynamic coordinated shifting control of automated mechanical transmissions without a clutch in a plug-in hybrid electric vehicle. Energies, 5, 3094-3109.
16. Hoberock, L. (1976). A survey of longitudinal acceleration comfort studies in ground transportation vehicles. J. Dynamic Systems, Measurement, and Control, 99, 76-84.
17. Hu, X., Li, S. and Peng, H. (2012a). A comparative study of equivalent circuit models for Li-ion batteries. J. Power Sources, 198, 359-367.
18. Hu, X., Li, S., Peng, H. and Sun, F. (2012b). Robustness analysis of state-of-charge estimation methods for two types of Li-ion batteries. J. Power Sources, 217, 209-219.
19. Huang, Y. J., Yin, C. L. and Zhang, J. W. (2009). Design of an energy management strategy for parallel hybrid electricvehicles using a logic threshold and instantaneous optimization method. Int. J. Automotive Technology10, 4, 513-521.
20. Hwang, H. S., Yang, D. H., Choi, H. K., Kim, H. S. and Hwang, S. H. (2011). Torque control of engine clutch to improve the driving quality of hybrid electric vehicles. Int. J. Automotive Technology12, 5, 763-768.
21. Johannesson, L., Asbogard, M. and Egardt, B. (2007). Assessing the potential of predictive control for hybrid vehicle powertrains using stochastic dynamic programming. IEEE Trans. Intelligent Transportation Systems, 8, 71-83.
22. Johnson, V. H. (2002). Battery performance models in ADVISOR. J. Power Sources, 110, 321-329.
23. Kim, N., Cha, S. and Peng, H. (2011). Optimal control of hybrid electric vehicles based on pontryagin's minimum principle. IEEE Trans. Control Systems Technology, 19, 1279-1287.
24. Kim, N., Cha, S. and Peng, H. (2012). Optimal equivalent fuel consumption for hybrid electric vehicles. IEEE Trans. Control Systems Technology, 20, 817-825.
25. Kluger, M. A. and Long, D. M. (1999). An overview of current automatic, manual and continuously variable transmission efficiencies and their projected future improvements. SAE Trans., 108, 1-6.
26. Kulkarni, M., Shim, T. and Zhang, Y. (2007). Shift dynamics and control of dual-clutch transmissions. Mechanism and Machine Theory, 42, 168-182.
27. Li, K. Q., Chen, T., Luo, Y. G. and Wang, J. Q. (2012). Intelligent environment-friendly vehicles: Concept and case studies. IEEE Trans. Intelligent Transportation Systems, 13, 318-328.
28. Li, S. G., Sharkh, S. M., Walsh, F. C. and Zhang, C. N. (2011). Energy and battery management of a plug-in series hybrid electric vehicle using fuzzy logic. IEEE Trans. Vehicular Technology, 60, 3571-3585.
29. Lin, C. C., Peng, H., Grizzle, J. W. and Kang, J. M. (2003). Power management strategy for a parallel hybrid electric truck. IEEE Trans. Control Systems Technology, 11, 839-849.
30. Markel, T., Brooker, A., Hendricks, I., Johnson, V., Kelly, K., Kramer, B., O'keefe, M., Sprik, S. and Wipke, K. (2002). ADVISOR: A systems analysis tool for advanced vehicle modeling. J. Power Sources, 110, 255-266.
31. Minh, V. T. and Rashid, A. A. (2012). Automatic control of clutches and simulations for parallel hybrid vehicles. Int. J. Automotive Technology13, 4, 645-651.
32. Moore, R. M., Ramaswamy, S., Cunningham, J. M. and Hauer, K. H. (2006). A dynamic simulation tool for the battery-hybrid hydrogen fuel cell vehicle. Fuel Cells, 6, 387-402.
33. Musardo, C., Rizzoni, G., Guezennec, Y. and Staccia, B. (2005). A-ECMS: An adaptive algorithm for hybrid electric vehicle energy management. European J. Control, 11, 509-524.
34. Nelson, P., Bloom, I., Amine, K. and Henriksen, G. (2002). Design modeling of lithium-ion battery performance. J. Power Sources, 110, 437-444.
35. Opila, D. F., Wang, X. Y., Mcgee, R., Gillespie, R. B., Cook, J. A. and Grizzle, J. W. (2012). An energy management controller to optimally trade off fuel economy and drivability for hybrid vehicles. IEEE Trans. Control Systems Technology, 20, 1490-1505.
36. Rizzoni, G., Guzzella, L. and Baumann, B. M. (1999). Unified modeling of hybrid electric vehicle drivetrains. IEEE-ASME Trans. Mechatronics, 4, 246-257.
37. Rousseau, A., Saglini, S., Jakov, M., Gray, D. and Hardy, K. (2003). Trade-offs between fuel economy and NOx emissions using fuzzy logic control with a hybrid CVT configuration. Int. J. Automotive Technology4, 1, 47-55.
38. Serrarens, A., Dassen, M. and Steinbuch, M. (2004). Simulation and control of an automotive dry clutch. American Control Conf. Proc., 5, 4078-4083.
39. Shemshadi, A., Bathaee, S. M. T., Azirani, A. A. and Kashani, S. J. (2010). Design of sugeno-type fuzzy logic controller for torque distribution in a parallel hybrid vehicle. Int. Review of Electrical Engineering-IREE, 5, 536-541.
40. Sorrentino, M., Rizzo, G. and Arsie, I. (2011). Analysis of a rule-based control strategy for on-board energy management of series hybrid vehicles. Control Engineering Practice, 19, 1433-1441.
41. Sundström, O., Ambühl, D. and Guzzella, L. (2010). On implementation of dynamic programming for optimal control problems with final state constraints. Oil & Gas Science and Technology-Revue de l'Institut Français du Pétrole65, 1, 91-102.
42. Syed, F. U., Kuang, M. L., Czubay, J. and Ying, H. (2006). Derivation and experimental validation of a power-split hybrid electric vehicle model. IEEE Trans. Vehicular Technology, 55, 1731-1747.
43. Tate, E. D., Grizzle, J. W. and Peng, H. E. (2010). SP-SDP for fuel consumption and tailpipe emissions minimization in an EVT hybrid. IEEE Trans. Control Systems Technology, 18, 673-687.
44. van Mierlo, J. and Maggetto, G. (2001). Vehicle simulation program: A tool to evaluate hybrid power management strategies based on an innovative iteration algorithm. Proc. Institution of Mechanical Engineers Part D-J. Automobile Engineering, 215, 1043-1052.
45. Wipke, K. B., Cuddy, M. R. and Burch, S. D. (1999). ADVISOR 2. 1: A user-friendly advanced powertrain simulation using a combined backward/forward approach. IEEE Trans. Vehicular Technology, 48, 1751-1761.
46. Zweiri, Y. H., Whidborne, J. F. and Seneviratne, L. D. (2000). Numerical inversion of the dynamic model of a single-cylinder diesel engine. Communications in Numerical Methods in Engineering, 16, 505-517.