Functional barriers against migration for food packaging

Multifunctional and Nanoreinforced Polymers for Food Packaging

Volumn , Issue , 2011, Pages 316-344

  Johansson, C ^a  

^a KARLSTAD UNIVERSITY   (Sweden)

Author keywords

Food safety; Functional barrier; Migration; Multilayer; Nanotechnology; Plastics

Indexed keywords

EID: 84882819918     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9780857092786     Document Type: Chapter

References (72)

1. Alexandre, M. and Dubois, P. (2000). Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Materials Science and Engineering, 28, 1-63.
2. Amberg-Schwab, S., Hoffman, M., Bader, H. and Gessler, M. (1998). Inorganic-organic polymers with barrier properties for water vapor, oxygen and flavors. Journal of Sol-Gel Science and Technology, 1/2, 141-146.
3. Andersson, C., JaÈrnstroèm, L. and Hellgren, A.-C. (2002). Effects of carboxylation of latex on polymer interdiffusion and water vapor permeability of latex films. Nordic Pulp and Paper Research Journal, 17 (1), 20-28.
4. Arab-Tehrany, E., Mouawad, C. and Desobry, S. (2007). Determination of partition coefficient of migrants in food simulants by the PRV method. Food Chemistry, 105, 1571-1577.
5. Aurela, B. and RaÈisaÈnen, T. (1993). Residual solvent content in heatset offset print. Journal of High Resolution Chromatography, 16, 422-424.
6. Aurela, B., Tapanila, T., Osmonen, R.-M. and Soèderhjelm, L. (1997). Development of methods for testing barriers in food packaging materials. Journal of High Resolution Chromatography, 20, 499-502.
7. Aurela, B., Vuorimaa, M. and Lindell, H. (2000). Migration from ovenable boards at high temperatures. Nordic Pulp and Paper Research Journal, 15 (2), 150-154.
8. Aurela, B., Ohra-aho, T. and Soèderhjelm, L. (2001). Migration of alkylbenzenes from packaging into food and TenaxÕ. Packaging Technology and Science, 14, 71-77.
9. Belhaneche-Bensemra, N., Zeddam, C. and Ouahmed, S. (2002). Study of the migration of additives from plasticized PVC. Macromolecular Symposia, 180, 101-201.
10. Bilbao-Saâinz, C., Avena-Bustillos, R.J., Wood, D.F., Williams, T.G. and McHugh, T.H. (2010). Composite edible films based on hydroxypropyl methylcellulose reinforced with microcrystalline cellulose nanoparticles. Journal of Agricultural Food Chemistry, 58, 3753-3760.
11. Blaikstone, B. (1999). What suppliers need to know: a brief course in food chemistry, TAPPI 1999 Polymers, Laminations and Coatings Conference Proceedings, pp. 277-291. TAPPI Press, Atlanta, GA.
12. Brandsch, J. and Piringer, O. (2008). Characteristics of plastic materials. In O.G. Piringer and A.L. Baner, eds, Plastic Packaging: Interaction with Food and Pharmaceuticals. Second, completely revised edition, pp. 15-62. Wiley-VCH Verlag, Weinheim, Germany.
13. Brown, H. and Williams, J. (2003). Packaged product quality and shelf life. In R. Coles, D. McDowell and M.J. Kirwan, eds, Food Packaging Technology, pp. 65-94.Blackwell Publishing, CRC Press, Boca Raton, FL.
14. Chau, C.-F., Wu, S.-H. and Yen, G.-C. (2007). The developments of regulations for food nanotechnology. Trends in Food Science & Technology, 18, 269-280.
15. Cole, M.F. and Bergeson, L.L. (2006). FDA regulation of food packaging produced using nanotechnology. Food Safety Magazine, April/May 2006, www.foodsafetymagazine.com (accessed 3 December 2009).
16. Colvin, V.L. (2003). The environmental impact of engineered nanomaterials. Nature Biotechnology, 21 (10), 1166-1170.
17. Comyn, J. (1985). Polymer Permeability. Elsevier Applied Science, London.
18. Conti, M.E. (2007). Heavy metals in food packaging. In P. Szefer and J. Nriagu, eds, Mineral Components in Food, pp. 339-362. CRC Press, Boca Raton, FL.
19. Crank, J. (1999). The Mathematics of Diffusion, 2nd edition. Oxford University Press, Oxford, UK.
20. Crompton, T.R. (2007). Additive Migration from Plastics into Foods: a Guide for the Analytical Chemist. Smithers Rapra, Shrewsbury, UK.
21. Cruz, S.A., Zanin, M., Nascente, P.A.P. and Bica de Moraes, M.A. (2010). Superficial modification in recycled PET by plasma etching for food packaging. Journal of Applied Polymer Science, 115, 2728-2733.
22. Dadbin, S., Noferesti, M. and Frounchi, M. (2008). Oxygen barrier LDPE/LLDPE/ organoclay nano-composite films for food packaging. Macromolecular Symposia, 274, 22-27.
23. Dainelli, D., Gontard, N., Spyropoulos, D., Zondervan-van den Beuken, E. and Tobback, P. (2008). Active and intelligent food packaging: legal aspects and safety concerns. Trends in Food Science & Technology, 19, S103-S112.
24. de Azeredo, H.M.C. (2009). Nanocomposites for food packaging applications. Food Research International, 42, 1240-1253.
25. European Bioplastics, www.european-bioplastics.org (accessed 11 January 2010).
26. European Commission Directive 97/48/EC. Official Journal of the European Union, L 222, 12.8.1997, 10-15.
27. European Commission Directive 2002/72/EC. Official Journal of the European Union, L 220, 15.8.2002, 18-58.
28. European Commission Directive 2008/39/EC. Official Journal of the European Union, L 63, 6.3.2008, 6-13.
29. European Commission Regulation (EC) No. 450/2009. Official Journal of the European Union, L 135, 29.5.2009, 3-11.
30. European Council Directive 82/711/EEC. Official Journal of the European Union, L 297, 23.10.1982, 26-30.
31. European Council Directive 85/572/EEC. Official Journal of the European Union, L 372, 31.12.1985, 14-21.
32. European Council Directive 89/109/EEC. Official Journal of the European Union, L 40, 11.2.1989, 38-44.
33. European Parliament and Council Directive 94/62/EC. Official Journal of the European Union, L 365, 31.12.1994, 10-23.
34. Feigenbaum, A., Laoubi, S. and Vergnaud, J.M. (1997). Kinetics of diffusion of a pollutant from a recycled polymer through a functional barrier: recycling plastics for food packaging. Journal of Applied Polymer Science, 66, 597-607.
35. Fiselier, K., Rutschmann, E., McCombie, G. and Grob, K. (2010). Migration of di(2-ethylhexyl) maleate from cardboard boxes into foods. European Food and Research Technology, 230, 619-626.
36. Franz, R. and Stoèrmer, A. (2008). Migration of plastic constituents. In O.G. Piringer and A.L. Baner, eds, Plastic Packaging: Interaction with Food and Pharmaceuticals, second, completely revised edition, pp. 349-415. Wiley-VCH Verlag, Weinheim, Germany.
37. Franz, R., Huber, M., Piringer, O.-G., Damant, A.P., Jickells, S.M. and Castle, L. (1996). Study of functional barrier properties of multilayer recycled poly(ethylene terephthalate) bottles for soft drinks. Journal of Agricultural and Food Chemistry, 44, 892-897.
38. Gruner, A. and Piringer, O. (1999). Component migration from adhesives used in paper and paperboard packaging for foodstuffs. Packaging Technology and Science, 12, 19-28.
39. Gupta, M., Lin, Y., Deans, T., Crosby, A., Baer, E., Hiltner, A. and Schiraldi, D.A. (2009). Biaxially oriented poly(propylene-g-maleic anhydride)/phosphate glass composite films for high gas barrier applications. Polymer, 50, 598-604.
40. Han, J.-K., Selke, S.E., Downes, T.W. and Harte, B.R. (2003). Application of a computer model to evaluate the ability of plastics to act as functional barriers. Packaging Technology and Science, 16, 107-118.
41. Hoet, P.M., Nemmar, A. and Nemery, B. (2004). Health impact of nanomaterials? Nature Biotechnology, 22 (1), 19.
42. Homoelle, J. (1999). The inhibition of migration of contaminants from paper into packaged foods. TAPPI Journal, 82 (8), 127-131.
43. Hoèuètmann, U. (1999). Germ load on packaging paper and board: transfer of microorganisms. TAPPI Journal, 82 (1), 74-77.
44. Joerger, R.D. (2007). Antimicrobial films for food applications: a quantitative analysis of their effectiveness. Packaging Technology and Science, 20, 231-273.
45. Johns, S.M., Jickels, S.M., Read, W.A. and Castle, L. (2000). Studies on functional barriers to migration. 3. Migration of benzophenone and model ink components from cartonboard to food during frozen storage and microwave heating. Packaging Technology and Science, 13, 99-104.
46. Katan, L.L. (1996). Do 'functional' barriers function? Packaging Technology and Science, 9, 289-296.
47. Kimpimaèki, T. and Santamaèki, K. (1998). Barrier dispersion coating - New feasibility for the packaging industry. Paperi ja Puu, 80 (4), 249-256.
48. Kimpimaèki, T. and Savolainen, A.V. (1997). Barrier dispersion coating of paper and board. In J. Brander and I. Thorn, eds, Surface Application of Paper Chemicals, pp. 208-228. Blackie Academic & Professional, Chapman & Hall, London.
49. Kirwan, M.J. and Strawbridge, J.W. (2003). Plastics in food packaging. In R. Coles, D. McDowell and M.J. Kirwan, eds, Food Packaging Technology, pp. 174-240. Blackwell Publishing, CRC Press, Boca Raton, FL.
50. Klein, A. and Daniels, E.S. (1997). Formulation components. In P.A. Lovell and M.S. El-Aasser, eds, Emulsion Polymerization and Emulsion Polymers, pp. 207-237. John Wiley & Sons, Chichester, UK.
51. Langowski, H.-C. (2008). Permeation of gases and condensable substances through monolayer and multilayer structures. In O.G. Piringer and A.L. Baner, eds, Plastic Packaging: Interaction with Food and Pharmaceuticals, second, completely revised edition, pp. 297-347. Wiley-VCH Verlag, Weinheim, Germany.
52. Linssen, J.P.H., Reitsma, J.C.E. and Cozijnsen, J.L. (1998). Research note - migration of antioxidants from polyolefins into ethanolic simulants. Packaging Technology and Science, 11, 241-245.
53. Mazzola, L. (2003). Commercializing nanotechnology. Nature Biotechnology, 21 (10), 1137-1143.
54. Mueller, C., Topolkaraev, V., Soerens, D., Hiltner, A. and Baer, E. (2000). Breathable polymer films produced by the microlayer coextrusion process. Journal of Applied Polymer Science, 78, 816-828.
55. MuÈller, D., Voigt, W. and Ghosh, J. (2001). Vitamin E - a new choice for polyolefin stabilization. Macromolecular Symposia, 176, 17-29.
56. Oberdoèrster, G., Oberdoèrster, E. and Oberdoèrster, J. (2005). Nanotoxicology: an emerging discipline evolving from studies of ultrafine particles. Environmental Health Perspectives, 113 (7), 823-839.
57. Paez Soares, E. and Saiki, M. (2006). Study on element migration from plastic food packagings to simulating solutions. Macromolecular Symposia, 245-246, 129-131.
58. Pastorelli, S., Sanches-Silva, A., Cruz, J.M., Simoneau, C. and Losada, P.P. (2008). Study of the migration of benzophenone from printed paperboard packages to cakes through different plastic films. European Food Research and Technology, 227, 1585-1590.
59. Paull, R., Wolfe, J., Heâbert, P. and Sinkula, M. (2003). Investing in nanotechnology. Nature Biotechnology, 21 (10), 1144-1147.
60. Pavlath, A.E. and Orts, W. (2009). Edible films and coatings: why, what and how? In M.E. Embuscado and K.C. Huber, eds, Edible Films and Coatings for Food Applications, pp. 1-23. Springer Science+Business Media, New York.
61. Pennarun, P.Y., Saillard, P., Feigenbaum, A. and Dole, P. (2005) Experimental direct evaluation of functional barriers in PET recycled bottles: comparison of migration behaviour of mono- and multilayers. Packaging Technology and Science, 18, 107-123.
62. Pospõâsïil, J. and Nesïpuêrek, S. (2008). Polymer additives. In O.G. Piringer and A.L. Baner, eds, Plastic Packaging: Interaction with Food and Pharmaceuticals, second, completely revised edition, pp. 63-88. Wiley-VCH Verlag, Weinheim, Germany.
63. Resolution ResAP (2002). 1 on paper and board materials and articles intended to come into contact with foodstuffs, www.coe.int/soc-sp (accessed 14 April 2010).
64. Resolution ResAP (2005). 2 on packaging inks applied to the non-food contact surface of food packaging materials and articles intended to come into contact with foodstuffs, www.coe.int/soc-sp (accessed 14 April 2010).
65. Robertson, G. L. (1993). Food Packaging Principles and Practice, Marcel Dekker, New York.
66. Rodrõâguez-Bernaldo de Quiroâs, A., Paseiro-Cerrato, R., Pastorelli, S., Koivikko, R., SImoneau, C. and Paseiro-Losada, P. (2009). Migration of photoinitiators by gas phase into dry foods. Journal of Agricultural and Food Chemistry, 57, 10211-10215.
67. Roèper, H. and Koch, H. (1990). The role of starch in biodegradable thermoplastic materials. Starch/StaÈrke, 42 (4), 123-130.
68. Sanches Silva, A., Sendoân Garcõâa, R., Cooper, I., Franz, R. and Paseiro Losada, P. (2006). Compilation of analytical methods and guidelines for the determination of selected model migrants from plastic packaging. Trends in Food Science & Technology, 17, 535-546.
69. Sanguansri, P. and Augustin, M.A. (2006). Nanoscale materials development - a food industry perspective. Trends in Food Science & Technology, 17, 547-556.
70. Steven, M.D. and Hotchkiss, J.H. (2003). Non-migratory bioactive polymers (NMBP) in food packaging. In R. Ahvenainen, ed., Novel Food Packaging Techniques, pp. 71-102. Woodhead Publishing, Cambridge, UK.
71. Tosa, V. and Mercea, P. (2008). Solution of the diffusion equation for multilayer packaging. In O.G. Piringer and A.L. Baner, eds, Plastic Packaging: Interaction with Food and Pharmaceuticals, second, completely revised edition, pp. 247-296. Wiley-VCH Verlag, Weinheim, Germany.
72. Wang, Q. and Storm, B.K. (2006). Migration study of polypropylene (PP) oil blends in food simulants. Macromolecular Symposia, 242, 307-314.