Submicron tomography using high energy synchrotron radiation

Advanced Structured Materials

Volumn 10, Issue , 2011, Pages 151-170

  Borbély, András ^a   Cloetens, Peter ^b   Maire, Eric ^c   Requena, Guillermo ^d  

^a ECOLE DES MINES DE SAINT ETIENNE   (France)

^b EUROPEAN SYNCHROTRON RADIATION FACILITY   (France)

^c UNIVERSITÉ DE LYON   (France)

^d VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84874250833     PISSN: 18698433     EISSN: 18698441     Source Type: Book Series    
DOI: 10.1007/978-3-642-17782-8_7     Document Type: Article

References (56)

1. Spanne, P., Rivers, L.: Computerized microtomography using synchrotron radiation from the NSLS. Nucl. Instrum. Meth. Phys. Res. B 24(25), 1063-1067 (1987)
2. Flannery, B.P., et al.: Three-dimensional X-ray microtomography. Science 237, 1439-1444 (1987)
3. Spanne, P., Throvert, J.F., et al.: Synchrotron computed microtomography of porous media: topology and transports. Phys. Rev. Lett. 73, 2001-2004 (1994)
4. Borbély, A., Kenesei, P., Biermann, H.: Estimation of effective properties of particle reinforced metal-matrix composites from microtomographic reconstructions. Acta Mater. 54, 2735-2744 (2006)
5. Stock, S.R.: Micro Computed Tomography: Methodology and Applications. CRC Press, Boca Raton (2008)
6. Banhart, J. (ed.): Advanced Tomographic Methods in Materials Research and Engineering, edited by. Oxford University Publishing, Oxford (2008)
7. Buffière, J.-Y., Maire, E., Cloetens, P., et al.: Characterisation of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography. Acta Metall. 47, 1613-1625 (1999)
8. Marrow, T.J., Buffiere, J.-Y., Withers, P.J., et al.: High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron. Int. J. Fatigue 26, 717-725 (2004)
9. Babout, L., Maire, E., Fougères, R.: Damage initiation in model metallic materials: X-ray tomography and modelling. Acta Mater. 52, 2475-2487 (2004)
10. Maire, E., Bouaziz, O., Di Michiel, M., et al.: Initiation and growth of damage in a dual phase steel observed by X-ray microtomography. Acta Mater. 56, 4954-4964 (2008)
11. Pyzalla, A., Camin, B., Buslaps, T., et al.: Simultaneous tomography and diffraction analysis of creep damage. Science 308, 92-95 (2005)
12. Maire, E., Carmona, V., Courbon, J., et al.: Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests. Acta Mater. 55, 6806-6815 (2007)
13. Cloetens, P., Ludwig, W., Baruchel, W., et al.: Holotomography: quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays. Appl. Phys. Lett. 75, 2912-2914 (1999)
14. Bleuet, P., Lemelle, L., Tucoulou, R. et al.: 3D chemical imaging based on a third-generation synchrotron source. Trends Anal. Chem. 29, 518-527 (2010)
15. Bleuet, P., Welcomme, E., Dooryhee, E., et al.: Probing the structure of heterogeneous diluted materials by diffraction tomography. Nat. Mater. 7, 468-472 (2008)
16. Ludwig, L., King, A., Reischig, P., et al.: New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging. Mater. Sci. Eng. A 524, 69-76 (2009)
17. Withers, P.J.: X-ray nanotomography. Mater. Today 10, 26-34 (2007)
18. Barty, A., Marchesini, S., Chapman, H.N.: Three-dimensional coherent X-ray diffraction imaging of a ceramic nanofoam: determination of structural deformation mechanisms. Phys. Rev. Lett. 101, 055501 (2008)
19. Adrien, J., Maire, E., Gimenez, N., et al.: Experimental study of the compression behavior of syntactic foams by in situ X-ray tomography. Acta Mater. 55, 1667-1679 (2007)
20. Requena, G., Degischer, H.P.: Creep behavior of reinforced and short fibre reinforced AlSi12CuMgNi piston. Mat. Sci. Eng. A-Struct. 420, 265-275 (2006)
21. Requena, G., Degischer, H.P., Marks, E., et al.: Microtomographic study of the evolution of microstructure during creep of an AlSi12CuMgNi alloy reinforced with Al2O3 short fibres. Mat. Sci. Eng. A 487, 99-107 (2008)
22. Marks, E., Requena, G., Degischer, H.P., et al.: Microtomography and creep model-ling of a short fibre reinforced aluminium piston alloy. Adv. Eng. Mat. (2010). doi:10.1002/adem. 201000237
23. Requena, G., Cloetens, P., Altendorfer, W., et al.: Submicrometer synchrotron tomography using Kirkpatrick-Baez optics. Scripta Mater. 61, 760-763 (2009)
24. Mokso, R., Cloetens, P., Maire, E., et al.: Nanoscale zoom tomo-graphy with hard x rays using Kirkpatrick-Baez optics. Appl. Phys. Lett. 90, 144104 (2007)
25. Labiche, J.C., Mathon, O., Pascarelli, S., et al.: The fast readout low noise camera as a versatile x-ray detector for time resolved dispersive extended x-ray absorption fine structure and diffraction studies of dynamic problems in materials science, chemistry, and catalysis. Rev. Sci. Instrum. 78, 091301 (2007)
26. http://mmc-assess.tuwien.ac.at
27. Kainer, U.: Basics of metal matrix composites. In: Kainer, U. (ed.) Metal Matrix Composites. Wiley-VCH, Weinheim (2006)
28. Yolton, C.T.: The pre-alloyed powder metallurgy of titanium with boron and carbon additions. JOM 56-5, 56-59 (2004)
29. Poletti, C., Warchomicka, F., Degischer, H.P.: Local deformation of Ti6Al4V modified 1 wt% B and 0.1 wt% C. Mat. Sci. Eng. A-Struct. 527, 1109-1116 (2010)
30. Poletti, C., Requena, G., Tolnai, D. et al.: Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1wt%B. Int. J. Mater. Res. 101, 1151-1157 (2010)
31. Banerjee, R., Collins, P.C., Genç, A., et al.: Direct laser deposition of in situ Ti-6Al-4V-TiB composites. Mat. Sci. Eng. A-Struct. 358, 343-349 (2003)
32. Bauer, B., Requena, G., Lieblich, M.: Creep resistance depending on particle reinforce-ment size of Al-alloys produced by powder metallurgy. In: Proceedings of the 2009 International Conference on Powder Metallurgy & Particulate Materials (2009)
33. Davis, J.R.: Aluminium and Aluminium Alloys. ASM International, Specialty hand-book, Ohio (2004)
34. Riedel, H.: Fracture at High Temperatures, p. 70. Springer Verlag, Berlin (1987)
35. Chuang, T.J., Kagava, K.I., Rice, J.R., et al.: Non-equilibrium for diffusive cavitation of grain boundaries. Acta Metall. 27, 265-284 (1973)
36. Budiansky, B., Hutchinson, J.W., Slutsky, S.: In: Hopkins, H.G., Sewell, M.J. (eds.) Mechanics of solids. The R. Hill 60th anniversary volume. Pergamon, Oxford (1982)
37. Di Michiel, M., Merino, J.M., Fernandez-Carreiras, D., et al.: Fast microtomography using high energy synchrotron radiation. Rev. Sci. Instrum. 76, 1-7 (2005)
38. De Carlo, F., Xiao, X., Tieman, B.: X-ray tomography system, automation and remote access at beamline 2-BM of the advanced photon source. Proc. SPIE 6318, 63180K (2006)
39. Rivers, M.L., Wang, Y., Uchida, T.: Microtomography at GeoSoilEnviroCARS. Proc. SPIE 5535, 783-791 (2004)
40. Rivers, M.L., Wang, Y.: Recent developments in microtomography at GeoSoilEnviro-CARS. Proc. SPIE 6318, 63180J (2006)
41. Uesugi, K., Takeuchi, A., Suzuki, Y.: High-definition high-throughput micro-tomography at SPring-8. J. Phys. Conf. Ser. 186, 012050 (2009)
42. Haibel, A., Beckmann, F., Dose, T., et al.: The GKSS beamlines at PETRA III and DORIS III. Proc. SPIE 7078, 70780Z (2008)
43. Beckmann, F., Herzen, J., Haibel, A., et al.: High density resolution in synchrotron-radiation-based attenuation-contrast microtomography. Proc. SPIE 7078, 70781D (2008)
44. Rack, A., Zabler, S., Müller, B.R., et al.: High resolution synchrotron-based radiography and tomography using hard X-rays at the BAMline (BESSY II). Nucl. Instrum. Meth. A 586, 327-344 (2008)
45. Rack, A., Weitkamp, T., Bauer Trabelsi, S.T., et al.: The micro-imaging station of the TopoTomo beamline at the ANKA synchrotron light source. Nucl. Instrum. Meth. B 267, 1978-1988 (2009)
46. Stampanoni, M., Grosso, A., Isenegger, A., et al.: Trends in synchrotron-based tomographic imaging: the SLS experience. Proc. SPIE 6318, 63180M (2006)
47. Marone, F., Hintermüller, C., McDonald, S., et al.: X-ray tomographic microscopy at TOMCAT. Proc. SPIE 7078, 707822 (2008)
48. Cloetens, P., Barrett, R., Baruchel, J., et al.: Phase objects in synchrotron radiation hard x-ray imaging. J. Phys. D Appl. Phys. 29, 133-146 (1996)
49. Toda, H., Uesugi, K., Takeuchi, A., et al.: Three-dimensional observation of nanoscopic precipitates in an aluminum alloy by microtomography with Fresnel zone plate optics. Appl. Phys. Lett. 89, 143112 (2006)
50. Suzuki, Y., Toda, H., Ch, Schroer.: Tomography using magnifying optics. In: Banhart, J. (ed.) Advanced Tomographic Methods in Materials Research and Engineering. Oxford University Press, Oxford (2008)
51. Uesugi, K., Takeuchi, A., Suzuki, Y.: Development of micro-tomography system with Fresnel zone plate optics at SPring-8. Proc. SPIE 6318, 63181F (2006)
52. Takeuchi, A., Uesugi, K., Suzuki, A.: Zernike phase-contrast X-ray microscope with pseudo-Kohler illumination generated by sectored (polygon) condenser plate. J. Phys. Conf. Ser. 186, 012020 (2009)
53. Kang, H., Yan, H., Winarksi, R., et al.: Focusing of hard x-rays to 16 nanometers with a multilayer Laue lens. Appl. Phys. Lett. 92, 221114 (2008)
54. Chu, Y.S., Yi, J.M., De Carlo, F., et al.: Hard-x-ray microscopy with Fresnel zone plates reaches 40 nm Rayleigh resolution. Appl. Phys. Lett. 92, 103119 (2008)
55. Stampanoni, M., Marone, F., Mikuljan, G., et al.: Advanced X-ray diractive optics. J. Phys. Conf. Ser. 186, 012018 (2009)
56. Stampanoni, M., Mokso, R., Marone, F., et al.: Phase-contrast tomography at the nanoscale using hard x-rays. Phys. Rev. B 81, 140105 (2010)