Preparation and properties of aluminum nitride-filled epoxy composites: Effect of filler characteristics and composite processing conditions

Journal of Applied Polymer Science

Volumn 127, Issue 5, 2013, Pages 3456-3466

  Zhu, B L ^a   Wang, J ^a   Ma, J ^a   Wu, J ^a   Yung, K C ^b   Xie, C S ^c  

^a WUHAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

^c HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

AlN; crosslink density; dielectric properties; epoxy matrix composites; microstructure; nanometer sized filler; tensile properties; thermal properties; viscosity

Indexed keywords

ALN; BROMINATED EPOXY; COMPOSITE PROCESSING; CROSS-LINK DENSITIES; DISSIPATION FACTORS; ELONGATION AT BREAK; EPOXY COMPOSITE; EPOXY MATRICES; EPOXY-MATRIX COMPOSITE; FOURIER TRANSFORM INFRARED; LOW VACUUM; PREPARATION AND PROPERTIES; PROCESSING CONDITION; SCANNING ELECTRON MICROSCOPE; SOLVENT EVAPORATION; VACUUM CONDITION; YOUNG'S MODULUS;

ALUMINUM NITRIDE; DIELECTRIC PROPERTIES; DIELECTRIC PROPERTIES OF SOLIDS; FILLED POLYMERS; FILLERS; MICROSTRUCTURE; SCANNING ELECTRON MICROSCOPY; TENSILE PROPERTIES; THERMODYNAMIC PROPERTIES; VACUUM EVAPORATION; VISCOSITY;

POLYMER MATRIX COMPOSITES;

EID: 84870509749     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.37599     Document Type: Article

References (41)

1. Lee, G. W.; Park. M.; Kim, J.; Lee, J. I.; Yoon, H. G., Compos. A Appl. Sci. Manuf. 2006, 37, 727.
2. Yung, K. C.; Wang, J.; Yue, T. M., Adv. Compos. Mater. 2006, 15, 371.
3. Todd, M. G.; Shi, F. G., IEEE Trans. Compon. Pack. Technol. 2003, 26, 667.
4. Kim, W.; Bae, J. W.; Choi, I. D.; Kim, Y. S., Polym. Eng. Sci. 1999, 39, 756.
5. Wong, C. P.; Bollampally, R. S., J. Appl. Polym. Sci. 1999, 74, 3396.
6. Procter, P.; Solc, J., IEEE Trans. Compon. Hybrids Manuf. Technol. 1991, 14, 708.
7. Ohashi, M.; Kawakami, S.; Yokogawa, Y.; Lai, G. C., J. Am. Ceram. Soc. 2005, 88, 2615.
8. Lee, G. W.; Lee, J. I.; Lee, S. S.; Park, M.; Kim, J., J. Mater. Sci. 2005, 40, 1259.
9. Xu, Y. S.; Chung, D. D. L.; Mroz, C., Compos. A Appl. Sci. Manuf. 2001, 32, 1749.
10. Bae, J. W.; Kim, W.; Cho, S. H.; Lee, S. H., J. Mater. Sci. 2000, 35, 5907.
11. Hsieh, C. Y.; Chung, S. L., J. Appl. Polym. Sci. 2006, 102, 4734.
12. Yu, S. Z.; Hing, P.; Hu, X., Compos. A Appl. Sci. Manuf. 2002, 33, 289.
13. Yu, S. Z.; Hing, P.; Hu, X., J. Appl. Phys. 2000, 88, 398.
14. Yung, K. C.; Wu, J.; Yue, T. M.; Xie, C. S., J. Compos. Mater. 2006, 40, 567.
15. Yung, K. C.; Zhu, B. L.; Wu, J.; Yue, T. M.; Xie, C. S., J. Polym. Sci. Part B: Polym. Phys. 2007, 45, 1662.
16. Yung, K. C.; Zhu, B. L.; Yue, T. M.; Xie, C. S., J. Appl. Polym. Sci. 2010, 116, 225.
17. Zhu, B. L.; Ma, J.; Wu, J.; Yung, K. C.; Xie, C. S., J. Appl. Polym. Sci. 2010, 118, 2754.
18. Hong, S. G.; Wu, C. S., Thermochim. Acta 1998, 316, 167.
19. Hong, S. G.; Wu, C. S., J. Therm. Anal. Calorim. 2000, 59, 711.
20. Xu, J. W.; Wong, C. P., Compos. A Appl. Sci. Manuf. 2007, 38, 13.
21. Zong, L. M.; Kempel, L. C.; Hawley, M. C., Polymer 2005, 46, 2638.
22. Zhou, Y. X.; Pervin, F.; Rangari, V. K.; Jeelani, S., Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. 2006, 426, 221.
23. Qi, B.; Zhang, Q. X.; Bannister, M.; Mai, Y. W., Compos. Struct. 2006, 75, 514.
24. Goyal, R. K.; Tiwari, A. N.; Mulik, U. P.; Negi, Y. S., Compos. A Appl. Sci. Manuf. 2007, 38, 516.
25. Goyanes, S. N.; Konig, P. G.; Marconi, J. D., J. Appl. Polym. Sci. 2003, 88, 883.
26. Choi, Y. K.; Sugimoto, K.; Song, S. M.; Gotoh, Y.; Ohkoshi, Y.; Endo, M., Carbon 2005, 43, 2199.
27. Xu, J. W.; Moon, K. S.; Tison, C.; Wong, C. P., IEEE Trans. Adv. Pack. 2006, 29, 295.
28. Ash, B. J.; Siegel, R. W.; Schadler, L. S., J. Polym. Sci. Part B: Polym. Phys. 2004, 42, 4371.
29. Miyagawa, H.; Drzal, L. T., Polymer 2004, 45, 5163.
30. Preghenella, M.; Pegoretti, A.; Migliaresi, C., Polymer 2005, 46, 12065.
31. Zhang, Y. H.; Binner, J., J. Mater. Sci. Lett. 2002, 21, 803.
32. Liu, G.; Liu, H.; Liu, Y.; He, S. Y., Polym. Degrad. Stab. 2011, 96, 732.
33. Luda, M. P.; Balabanovich, A. I.; Zanetti, M.; Guaratto, D., Polym. Degrad. Stab. 2007, 92, 1088.
34. Bandyopadhyay, A.; Valavala, P. K.; Clancy, T. C.; Wise, K. E.; Odegard, G. M., Polymer 2011, 52, 2445.
35. Greenwood, R.; Luckham, P. F.; Gregory, T. J., Colloid Interface Sci. 1997, 191, 11.
36. Wang, Q.; Gao, W.; Xie, Z.M., J. Appl. Polym. Sci. 2003, 89, 2397.
37. Kwon, S. C.; Adachi, T.; Araki, W.; Yamaji, A., Acta Mater. 2006, 54, 3369.
38. Sanada, K.; Tada, Y.; Shindo, Y., Compos. A Appl. Sci. Manuf. 2009, 40, 724.
39. Lee, E. S.; Lee, S. M.; Shanefield, D. J.; Cannon, W. R., J. Am. Ceram. Soc. 2008, 91, 1169.
40. Lee, E. S.; Lee, S. M.; Cannon, W. R.; Shanefield, D. J., Colloid Surf. A 2008, 316, 95.
41. Jesionowski, T.; Bula, K.; Janiszewski, J.; Jurga, J., Compos. Interface 2003, 10, 225.