Comprehensive topological analysis of conductive and inductive charging solutions for plug-in electric vehicles

IEEE Transactions on Vehicular Technology

Volumn 61, Issue 8, 2012, Pages 3475-3489

  Khaligh, Alireza ^a   Dusmez, Serkan ^a  

^a UNIVERSITY OF MARYLAND   (United States)

Author keywords

Electric vehicles (EVs); inductive charging; plug in hybrid electric vehicles (PHEVs); power electronics; wide bandgap semiconductor devices

Indexed keywords

CHARGING SOLUTIONS; FUEL-EFFICIENT VEHICLES; GLOBAL ENERGY; INDUCTIVE CHARGING; LEVEL-1; PLUG-IN HYBRID ELECTRIC VEHICLE; PLUG-IN HYBRID ELECTRIC VEHICLES; PLUG-INS; POWER LEVELS; SINGLE STAGE; TOPOLOGICAL ANALYSIS; TOPOLOGICAL SURVEYS; WIDE-BAND-GAP SEMICONDUCTOR;

AUTOMOTIVE INDUSTRY; ELECTRIC VEHICLES; ENERGY POLICY; GALLIUM NITRIDE; HYBRID VEHICLES; POWER ELECTRONICS; SILICON CARBIDE; TOPOLOGY;

CHARGING (BATTERIES);

EID: 84867837912     PISSN: 00189545     EISSN: None     Source Type: Journal    
DOI: 10.1109/TVT.2012.2213104     Document Type: Article

References (73)

1. U.S. Energy Information Admin., AnnualEnergy Review. [Online]. Avail- able: http://www.eia.gov/totalenergy/data/annual/index.cfm
2. A. Emadi, S. S. Williamson, and A. Khaligh, "Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems," IEEE Trans. PowerElectron., vol. 21, no. 3, pp. 567-577, May 2006.
3. S. S. Raghavan, O. C. Onar, and A. Khaligh, "Power electronic interfaces for future plug-in transportation systems," IEEE Power Electron. Soc. Newslett., vol. 24, no. 3, pp. 23-26, Jul. 2010.
4. A. Khaligh and Z. Li, "Battery, ultracapacitor, fuel-cell, and hybrid energy storage systems for electric, hybrid electric, fuel cell, and plug-in hybrid electric vehicles: State-of-Art," IEEE Trans. Veh. Technol., vol. 59, no. 6, pp. 2806-2814, Jul. 2010.
5. M. Yilmaz and P. T. Krein, "Review of charging power levels and infras-tructure for plug-in electric and hybrid vehicles," in Proc. IEEE Elect. Veh. Conf., Greenville, SC, Mar. 2012, pp. 1-8.
6. T. Bohn, Plug-in Electric (PEV) Standards, Upcoming PEVs/Features, charging system overview, U.S Dept. of Energy, Clean Cities Coali-tion, Golden, CO. [Online]. Available: http://www1.eere.energy.gov/ cleancities/
7. J. P. M. Figuerido, F. L. Tofili, and B. L. A. Silva, "A review of single-phase PFC topologies based on the boost converter," in Proc. IEEE Int. Conf. Ind. Appl., Sao Paulo, Brazil, Nov. 2010, pp. 1-6.
8. F. Musavi, W. Eberle, and W. G. Dunford, "A high-performance single-phase bridgeless interleaved PFC converter for plug-in hybrid electric vehicle battery chargers," IEEE Trans. Ind. Electron., vol. 47, no. 4, pp. 1833-1843, Aug. 2011.
9. F. Musavi, W. Eberle, and W. G. Dunford, "A phase shifted semi-bridgeless boost power factor corrected converter for plug-in hybrid elec-tric vehicle battery chargers," in Proc. IEEE Appl. Power Electron. Conf. Expo., FortWorth, TX, Mar. 2011, pp. 821-828.
10. B. Singh, B. N. Singh, A. Chandra, K. Al-Haddad, A. Pandey, and D. P. Kothari, "A review of single phase improved power quality AC-DC converters," IEEE Trans. Power Del., vol. 50, no. 5, pp. 962-981, Oct.2003.
11. D. C. Erb, O. C. Onar, and A. Khaligh, "Bi-directional charging topologies for plug-in hybrid electric vehicles," in Proc. IEEE Appl. Power Electron. Conf. Expo., Feb. 21-25, 2010, pp. 2066-2072.
12. Y. Du, S. Lukic, B. Jacobson, and A. Huang, "Review of high power isolated bi-directional dc/dc converters for PHEV/EV DC charging in-frastructure," in Proc. IEEEEnergy Convers. Congr. Expo., Phoenix, AZ, Sep. 2011, pp. 553-560.
13. D. Gautam, F. Musavi, M. Edington, W. Eberle, and W. G. Dunford, "An automotive on-board 3.3 kW battery charger for PHEV application," in Proc. IEEE Veh. PowerPropulsion Conf., Chicago, IL, Sep. 2011, pp. 1-6.
14. D. Gautam, F. Musavi, M. Edington, W. Eberle, and W. G. Dunford, "A zero voltage switching full-bridge DC-DC converter with capacitive output filter for a plug-in-hybrid electric vehicle battery charger," in Proc. IEEEAppl. PowerElectron. Conf. Expo., Orlando, FL, May 2012, pp. 1381-1386.
15. H. J. Chae, H. T. Moon, and J. Y. Lee, "On-board battery charger for PHEV without high-voltage electrolytic capacitor," Electron. Lett., vol. 46, no. 25, pp. 1691-1692, Dec. 2010.
16. H. J. Chae, W. Y. Kim, S. Y. Yun, Y. S. Jeong, J. Y. Lee, and H. T. Moon, "3.3 kW on board charger for electric vehicles," in Proc. Int. Conf. Power Electron., Shilla Jeju, Korea, Jun. 2011, pp. 2717-2719.
17. J. S. Kim, G.-Y. Choe, H.-M. Jung, B.-K. Lee, Y.-J. Cho, and K.-B. Han, "Design and implementation of a high-efficiency on-board battery charger for electric vehicles with frequency control strategy," in Proc. IEEE Veh. Power Propulsion Conf., Lille, France, Sep. 2010, pp. 1-6.
18. Y. J. Lee, A. Khaligh, and A. Emadi, "Advanced integrated bidirectional ac/dc and dc/dc converter for plug-in hybrid electric vehicles," IEEE Trans. Veh. Technol., vol. 58, no. 8, pp. 3970-3980, Oct. 2009.
19. D. C. Erb, O. C. Onar, and A. Khaligh, "An integrated bidirectional power electronic converter with multi-level AC-DC/DC-AC converter and non-inverted buck-boost converter for PHEVs with minimal grid level disruptions," in Proc. IEEE Veh. Power Propulsion Conf., Sep. 1-3, 2010, pp. 1-6.
20. H. Chen, X. Wang, and A. Khaligh, "A single stage integrated bidirec-tional ac/dc and dc/dc converter for plug-in hybrid electric vehicles," in Proc. IEEE Veh. Power Propulsion Conf., Sep. 6-9, 2011, pp. 1-6.
21. S. Dusmez and A. Khaligh, "A novel low cost integrated on-board charger topology for electric vehicles and plug-in hybrid electric vehicles," in Proc. Appl. PowerElectron. Conf., Feb. 2012, pp. 2611-2616.
22. S. Dusmez and A. Khaligh, "Cost effective solutions to level-3 on-board battery chargers," in Proc. Appl. PowerElectron. Conf., Feb. 5-8, 2012, pp. 2121-2127.
23. W. E. Rippel, "Integrated traction inverter and battery charger apparatus," U.S. Patent 4 920 475, Apr. 24, 1990.
24. W. E. Rippel and A. G. Cocconi, "Integrated motor drive and recharge system," U.S. Patent 5 099 186, Mar. 24, 1992.
25. A. G. Cocconi Glendora, "Combined motor drive and battery charger system," U.S. Patent 5 341075, Aug. 23, 1994.
26. S. Sul and S. Lee, "An integral battery charger for four-wheel drive electric vehicle," IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1096-1099, Sep./Oct. 1995.
27. L. Solero, "Nonconventional on-board charger for electric vehicle propul- sion batteries," IEEE Trans. Veh. Technol., vol. 50, no. 1, pp. 144-149, Jan. 2001. (Pubitemid 32444223)
28. G. Pellegrino, E. Armando, and P. Guglielmi, "An integral battery charger with power factor correction for electric scooter," IEEE Trans. Power Electron., vol. 25, no. 3, pp. 751-759, Mar. 2010.
29. H. Chang and C. Liaw, "An integrated driving/charging switched reluc- tance motor drive using three-phase power module," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1763-1775, May 2011.
30. G. Su and L. Tang, "Current source inverter based traction drive for EV battery charging applications," in Proc. IEEE Veh. Power Propulsion Conf., Sep. 6-9, 2011, pp. 1-6.
31. S. Haghbin, S. Lundmark, M. Alakula, and O. Carlson, "An isolated high- power integrated charger in electrified-vehicle applications," IEEE Trans. Veh. Technol., vol. 60, no. 9, pp. 4115-4126, Nov. 2011.
32. S. Lacroix, E. Laboure, and M. Hilairet, "An integrated fast battery charger for electric vehicle," in Proc. IEEE Veh. Power Propulsion Conf., Sep. 1-3, 2010, pp. 1-6.
33. S. Bai and S. Lukic, "Design considerations for DC charging for plug-in vehicles," in Proc. IEEE Veh. Power Propulsion Conf., Sep. 6-9, 2011, pp. 1-6.
34. P. Verdelho and G. D. Marques, "Four-wire current-regulated PWM voltage converter," IEEE Trans. Ind. Electron., vol. 45, no. 5, pp. 761-770, Oct. 1998. (Pubitemid 128740297)
35. R. Zhang, F. C. Lee, and D. Boroyevich, "Four-legged three-phase PFC rectifier with fault tolerant capability," in Proc. IEEE Power Electron. Spec. Conf., 2000, pp. 359-364. (Pubitemid 32190333)
36. J. W. Kolar and F. C. Zach, "A novel three-phase utility interface mini- mizing line current harmonics of high-power telecommunications rectifier modules," IEEE Trans. Ind. Electron., vol. 44, no. 4, pp. 456-467, Aug. 1997. (Pubitemid 127828673)
37. N. Bel Haj Youssef, K. Al-Haddad, and H. Y. Kanaan, "Implementation of a new linear control technique based on experimentally validated small- signal model of three-phase three-level boost-type vienna rectifier," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1666-1676, Oct. 2008. (Pubitemid 351585980)
38. K. Jin, X. Ruan, M. Yang, and M. Xu, "A hybrid fuel cell power system," IEEE Trans. Ind. Electron., vol. 56, no. 4, pp. 1212-1222, Apr. 2009.
39. R. Beiranvand, B. Rashidian, M. R. Zolghadri, and S. M. H. Alavi, "De- signing an adjustable wide range regulated current sources," IEEE Trans. PowerElectron., vol. 25, no. 1, pp. 197-208, Jan. 2010.
40. O. Garcia, P. Zumel, A. de Castro, and A. Cobos, "Automotive DC-DC bidirectional converter made with many interleaved Buck Stages," IEEE Trans. PowerElectron., vol. 21, no. 3, pp. 578-586, May 2006.
41. D. Aggeler, F. Canales, H. Z. L. Parra, A. Coccia, N. Butcher, and O. Apeldoorn, "Ultra-fast DC-charge infrastructures for EV-mobility and future smart grids," in Proc. IEEE Innov. Smart Grid Technol. Conf., Oct. 11-13,2010,pp. 1-8.
42. S. Dusmez, A. Cook, and A. Khaligh, "Comprehensive analysis of high quality power converters for level 3 Off-board chargers," in Proc. IEEE Veh. Power Propulsion Conf., Sep. 6-9, 2011, pp. 1-10.
43. K. W. Klontz, A. Esser, R. R. Bacon, D. M. Divan, D. W. Novotny, and R. D. Lorenz, "An electric vehicle charging system with universal induc- tive interface," in Proc. IEEE Power Convers. Conf., Yokohama, Japan, Apr. 1993, pp. 227-232.
44. R. Severns, E. Yeow, G. Woody, J. Hall, and J. Hayes, "An ultra-compact transformer for a 100 W to 120 kW inductive coupler for electric vehicle charging," in Proc. IEEE Appl. Power Electron. Conf. Expo., San Jose, CA, Mar. 1996, pp. 32-38.
45. H. Ayano, K. Yamamato, N. Hino, and I. Yamato, "Highly Efficient Contactless Electrical Energy Transmission System," in Proc. Annu. Conf. IEEEInd. Electron. Soc., Sevilla, Spain, Nov. 2002, pp. 1364-1369.
46. R. Myunghyo, C. Honnyong, P. Yonghwan, and B. Juwon, "Analysis of the contactless power transfer system using modeling and analysis of the contactless transformer," in Proc. Annu. Conf. IEEEInd. Electron. Soc., Raleigh, NC, Nov. 2005, pp. 1036-1042.
47. C. S. Wang, O. H. Stielau, and G. A. Covic, "Design considerations for a contactless electric vehicle battery charger," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1308-1314, Oct. 2005. (Pubitemid 41489373)
48. C. S. Wang, G. A. Covic, and O. H. Stileu, "Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems," IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 148-157, Feb. 2004.
49. J. Hirai, T. W. Kim, and A. Kawamura, "Study on intelligent battery charging using inductive transmission of power and information," IEEE Trans. Power Electron., vol. 15, no. 2, pp. 335-345, Mar. 2000.
50. J. Sallan, L. Villa, A. Llombart, and J. F. Sanz, "Optimal design of ICPT systems applied to electric vehicle battery charge," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2140-2149, Jun. 2009.
51. M. Budhia, G. A. Covic, and J. T. Boys, "Design and optimization of circular magnetic structures for lumped inductive power transfer systems," IEEE Trans. Power Electron., vol. 26, no. 11, pp. 3096-3108, Nov. 2011.
52. S. Lee, J. Huh, C. Park, N. S. Choi, G. H. Cho, and C. T. Rim, "On-line electric vehicle using inductive power transfer system," in Proc. IEEE Energy Convers. Congr. Expo., Atlanta, GA, 2010, pp. 1598-1601.
53. H. H. Wu, A. Gilchrist, K. Sealy, P. Israelsen, and J. Muhs, "A review on inductive charging for electric vehicles," in Proc. IEEE Int. Elect. Mach. Drives Conf., Niagara Falls, ON, Canada, May 2011, pp. 143-147.
54. J. Huh, S. W. Lee, W. Y. Lee, G. H. Cho, and C. T. Rim, "Narrow-width in- ductive power transfer system for online electrical vehicles," IEEE Trans. Power Electron., vol. 26, no. 12, pp. 3666-3679, Dec. 2011.
55. M. L. G. Kissin, G. A. Covic, and J. T. Boys, "Steady-state flat-pickup loading effects in polyphase inductive power transfer systems," IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2274-2282, Jun. 2011.
56. S. Raabe, G. A. Covic, J. T. Boys, C. Pennalligen, and P. Shekar, "Practical considerations in the design of multiphase pick-ups for contactless power transfer systems," in Proc. Annu. Conf. IEEE Ind. Electron. Soc., Porto, Portugal, Nov. 2009, pp. 753-758.
57. L. Marlino, "FreedomCAR and DOE roadmap for automotive power electronics," in Proc. Appl. Power Electron. Conf., Fort Worth, TX, Mar. 2011.
58. Mitsubishi Motors Press Release. [Online]. Available: http://www. mitsubishielectric.com/news/2012/0308.html
59. Cree Semiconductors press release. [Online]. Available: http:// www.cree.com/news-and-events/cree-news/press-releases/2012/may/ 120502- 50a-power
60. J. W. Palmour, "SiC power devices for smart grid systems," in Proc. IEEE Power Electron. Conf., Sapporo, Japan, Jun. 2010, pp. 1006-1013.
61. T. Ninomiya, "HVDC system for a data center equipped with SiC power devices," in Proc. IEEE Elect. Power Equip.-Switching Technol. Conf., X'ian, China, Oct. 2011, pp. 421-426.
62. S. K. Mazumder and P. Jedrazczak, "Evaluation of a SiC dc/dc converter for plug-in hybrid electric vehicle at high inlet coolant temperature," IET Power Electron. J., vol. 4, no. 6, pp. 708-774, Oct. 2010.
63. J. L. Hudgins, G. S. Simin, E. Santi, and M. A. Khan, "An assessment of wide bandgap semiconductors for power devices," IEEE Trans. Power Electron., vol. 18, no. 3, pp. 907-914, May 2003.
64. J. Biela, M. Schweizer, S. Waffler, B. Wrzecionko, and J. W. Kolar, "SiC vs. Si\-Evaluation of potentials for performance improvement of power electronics converter systems by SiC power semiconductors," in Proc. Mater. Sci. Forum, Apr. 2010, pp. 1101-1106.
65. B. Wrzecionko, J. Biela, and J. W. Kolar, "SiC power semiconductors in HEVs: Influence of junction temperature on power density, chip utiliza- tion and efficiency," in Proc. IEEE IECON, Porto, Portugal, Nov. 2009, pp. 3834-3841.
66. H. Zhang, L. M. Tolbert, and B. Ozpineci, "Impact of SiC devices on hybrid electric and plug-in electric vehicles," IEEE Trans. Ind. Appl., vol. 47, no. 2, pp. 912-921, Mar. 2011.
67. B. Ozpineci, L. M. Tolbert, S. K. Islam, and M. Hasanuzzaman, "Effects of Silicon Carbide (SiC) power devices on HEV PWM inverter losses," in Proc. Annu. Conf. IEEE Ind. Electron. Soc., Denver, CO, Dec. 2001, pp. 1061-1066. (Pubitemid 34078963)
68. A. Elasser, M. H. Kheraluwala, M. Ghezzo, R. L. Steigerwald, N. A. Evers, J. Kretchmer, and T. P. Chow, "Comparative evaluation of new silicon carbide diodes and state-of-the-art silicon diodes for power electronic applications," IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 915- 921, Aug. 2003.
69. Y. Jang, D. L. Dillman, and M. Jovanovic, Performance Evaluation of Silicon-Carbide MOSFET in Three Phase High-Power Factor Recti-fier, Delta Prod. Corporation, Taipei, Taiwan. [Online]. Available: www. deltartp.com
70. U. K. Mishra, "Gallium nitride based high power heterojunction field effect transistor: Process development and present status at UCSB," IEEE Trans. Electron Devices, vol. 48, no. 3, pp. 552-559, Mar. 2001. (Pubitemid 32271173)
71. O. Ambacher, J. Smart, J. R. Shealy, N. G. Weimann, K. Chu, M. Murphy, W. J. Schaff, L. F. Eastman, R. Dimitrov, L. Wittmer, M. Stutzman, W. Rieger, and J. Hilsenbeck, "Two-dimensional electron gases induced by spontaneous and piezoelectric polarization in undoped and doped AlGaN/GaN heterostructures, " J. Appl. Phys., vol. 85, no. 6, pp. 3222-3232, Mar. 1999.
72. S. Potbhare, A. Akturk, N. Goldsman, J. M. McGarrity, and A. Agarwal, "Modeling and design of high temperature silicon carbide DMOSFET based medium power DC-DC converter," in Proc. Int. Conf. HiTEC May 2010.
73. S. S. Raghavan and A. Khaligh, "Electrification potential factor: Energy-based value proposition analysis of plug-in hybrid electric vehicles," IEEE Trans. Veh. Technol., vol. 61, no. 3, pp. 1052-1059, Mar. 2012.