메뉴 건너뛰기




Volumn 24, Issue 2, 2008, Pages 327-342

Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution

Author keywords

A. Ductility; A. Microstructures; B. Crystal plasticity; C. Numerical algorithms; Property closures

Indexed keywords

CRYSTALLOGRAPHY; DUCTILITY; HOMOGENIZATION METHOD; POLYCRYSTALLINE MATERIALS; STATISTICAL METHODS; STRAIN HARDENING; TENSILE STRENGTH; TEXTURES;

EID: 35748972651     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.05.002     Document Type: Article
Times cited : (78)

References (35)
  • 1
    • 20644431588 scopus 로고    scopus 로고
    • Finite approximations to the second-order properties closure in single phase polycrystals
    • Adams B.L., Gao X., and Kalidindi S.R. Finite approximations to the second-order properties closure in single phase polycrystals. Acta Materialia 53 13 (2005) 3563-3577
    • (2005) Acta Materialia , vol.53 , Issue.13 , pp. 3563-3577
    • Adams, B.L.1    Gao, X.2    Kalidindi, S.R.3
  • 2
    • 21344435044 scopus 로고    scopus 로고
    • Microstructure design of a two phase composite using two-point correlation functions
    • Adams B.L., Garmestani H., and Saheli G. Microstructure design of a two phase composite using two-point correlation functions. Journal of Computer-Aided Materials Design 11 (2004) 103-115
    • (2004) Journal of Computer-Aided Materials Design , vol.11 , pp. 103-115
    • Adams, B.L.1    Garmestani, H.2    Saheli, G.3
  • 4
    • 2342450525 scopus 로고    scopus 로고
    • Microstructures by design: linear problems in elastic-plastic design
    • Adams B.L., Lyon M., and Henrie B. Microstructures by design: linear problems in elastic-plastic design. International Journal of Plasticity 20 8-9 (2004) 1577-1602
    • (2004) International Journal of Plasticity , vol.20 , Issue.8-9 , pp. 1577-1602
    • Adams, B.L.1    Lyon, M.2    Henrie, B.3
  • 5
    • 0020895305 scopus 로고
    • Micromechanics of crystals and polycrystals
    • Asaro R.J. Micromechanics of crystals and polycrystals. Advances in Applied Mechanics 23 (1983) 1-115
    • (1983) Advances in Applied Mechanics , vol.23 , pp. 1-115
    • Asaro, R.J.1
  • 6
    • 0022083554 scopus 로고
    • Texture development and strain hardening in rate dependent polycrystals
    • Asaro R.J., and Needleman A. Texture development and strain hardening in rate dependent polycrystals. Acta Metallurgica et Materialia 33 6 (1985) 923-953
    • (1985) Acta Metallurgica et Materialia , vol.33 , Issue.6 , pp. 923-953
    • Asaro, R.J.1    Needleman, A.2
  • 7
    • 58149321545 scopus 로고
    • A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking
    • Beaudoin A.J., Dawson P.R., Mathur K.K., and Kocks U.F. A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking. International Journal of Plasticity 11 5 (1995) 501-521
    • (1995) International Journal of Plasticity , vol.11 , Issue.5 , pp. 501-521
    • Beaudoin, A.J.1    Dawson, P.R.2    Mathur, K.K.3    Kocks, U.F.4
  • 8
    • 0027800087 scopus 로고
    • Three-dimensional deformation process simulation with explicit use of polycrystal plasticity models
    • Beaudoin A.J., Mathur K.K., Dawson P.R., and Johnson G.C. Three-dimensional deformation process simulation with explicit use of polycrystal plasticity models. International Journal of Plasticity 9 7 (1993) 833-860
    • (1993) International Journal of Plasticity , vol.9 , Issue.7 , pp. 833-860
    • Beaudoin, A.J.1    Mathur, K.K.2    Dawson, P.R.3    Johnson, G.C.4
  • 11
    • 36849125416 scopus 로고
    • Solid mixture permittivities
    • Brown W.F. Solid mixture permittivities. The Journal of Chemical Physics 23 8 (1955) 1514-1517
    • (1955) The Journal of Chemical Physics , vol.23 , Issue.8 , pp. 1514-1517
    • Brown, W.F.1
  • 15
    • 0000378073 scopus 로고
    • Mémoire sur l'emploi du fer et de l'acier dans les constructions
    • Considère M. Mémoire sur l'emploi du fer et de l'acier dans les constructions. Annales des Ponts et Chaussées 9 (1885) 574
    • (1885) Annales des Ponts et Chaussées , vol.9 , pp. 574
    • Considère, M.1
  • 16
    • 0032348480 scopus 로고    scopus 로고
    • Normal-boundary intersection: a new method for generating Pareto optimal points in multicriteria optimization problems
    • Das I.Y., and Dennis J.E. Normal-boundary intersection: a new method for generating Pareto optimal points in multicriteria optimization problems. SIAM Journal of Optimization 8 (1998) 631-657
    • (1998) SIAM Journal of Optimization , vol.8 , pp. 631-657
    • Das, I.Y.1    Dennis, J.E.2
  • 17
    • 0037175039 scopus 로고    scopus 로고
    • Quantitative prediction of textures in aluminium cold rolled to moderate strains
    • Delannay L., Kalidindi S.R., and Van Houtte P. Quantitative prediction of textures in aluminium cold rolled to moderate strains. Materials Science and Engineering A 336 1-2 (2002) 233-244
    • (2002) Materials Science and Engineering A , vol.336 , Issue.1-2 , pp. 233-244
    • Delannay, L.1    Kalidindi, S.R.2    Van Houtte, P.3
  • 18
    • 33846236532 scopus 로고    scopus 로고
    • Generalized Pareto front methods applied to second-order material property closures
    • Fullwood D.T., Adams B.L., and Kalidindi S.R. Generalized Pareto front methods applied to second-order material property closures. Computational Materials Science 38 4 (2007) 788-799
    • (2007) Computational Materials Science , vol.38 , Issue.4 , pp. 788-799
    • Fullwood, D.T.1    Adams, B.L.2    Kalidindi, S.R.3
  • 19
    • 33646824176 scopus 로고    scopus 로고
    • Elastic properties closures using second-order homogenization theories: case studies in composites of two isotropic constituents
    • Kalidindi S.R., Binci M., Fullwood D., and Adams B.L. Elastic properties closures using second-order homogenization theories: case studies in composites of two isotropic constituents. Acta Materialia 54 11 (2006) 3117-3126
    • (2006) Acta Materialia , vol.54 , Issue.11 , pp. 3117-3126
    • Kalidindi, S.R.1    Binci, M.2    Fullwood, D.3    Adams, B.L.4
  • 21
    • 33644885703 scopus 로고    scopus 로고
    • Spectral calibration of crystal plasticity models
    • Kalidindi S.R., Duvvuru H.K., and Knezevic M. Spectral calibration of crystal plasticity models. Acta Materialia 54 7 (2006) 1795-1804
    • (2006) Acta Materialia , vol.54 , Issue.7 , pp. 1795-1804
    • Kalidindi, S.R.1    Duvvuru, H.K.2    Knezevic, M.3
  • 22
    • 35748949715 scopus 로고    scopus 로고
    • Kalidindi, S.R., Houskamp, J.R., in press. Application of the spectral methods of microstructure design to continuous fiber reinforced composites. Journal of Composite Materials.
  • 23
    • 2342531004 scopus 로고    scopus 로고
    • Microstructure sensitive design of an orthotropic plate subjected to tensile load
    • Kalidindi S.R., Houskamp J.R., Lyon M., and Adams B.L. Microstructure sensitive design of an orthotropic plate subjected to tensile load. International Journal of Plasticity 20 8-9 (2004) 1561-1575
    • (2004) International Journal of Plasticity , vol.20 , Issue.8-9 , pp. 1561-1575
    • Kalidindi, S.R.1    Houskamp, J.R.2    Lyon, M.3    Adams, B.L.4
  • 24
    • 17444403970 scopus 로고    scopus 로고
    • Adaptive weighted-sum method for bi-objective optimization: Pareto front generation
    • Kim I.Y., and de Weck O.L. Adaptive weighted-sum method for bi-objective optimization: Pareto front generation. Structural and Multidisciplinary Optimization 29 (2005) 149-158
    • (2005) Structural and Multidisciplinary Optimization , vol.29 , pp. 149-158
    • Kim, I.Y.1    de Weck, O.L.2
  • 25
    • 34247159639 scopus 로고    scopus 로고
    • Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures
    • Knezevic M., and Kalidindi S.R. Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures. Computational Materials Science 39 3 (2007) 643-648
    • (2007) Computational Materials Science , vol.39 , Issue.3 , pp. 643-648
    • Knezevic, M.1    Kalidindi, S.R.2
  • 26
    • 0002531324 scopus 로고
    • Bounds for effective elastic moduli of disordered materials
    • Kroner E. Bounds for effective elastic moduli of disordered materials. Journal of the Mechanics and Physics of Solids 25 2 (1977) 137-155
    • (1977) Journal of the Mechanics and Physics of Solids , vol.25 , Issue.2 , pp. 137-155
    • Kroner, E.1
  • 27
    • 2942722247 scopus 로고    scopus 로고
    • A stable spatio-temporal G-closure and Gm-closure of a set of isotropic dielectrics with respect to one-dimensional wave propagation
    • Lurie K.A. A stable spatio-temporal G-closure and Gm-closure of a set of isotropic dielectrics with respect to one-dimensional wave propagation. Wave Motion 40 2 (2004) 95-110
    • (2004) Wave Motion , vol.40 , Issue.2 , pp. 95-110
    • Lurie, K.A.1
  • 29
    • 0024774103 scopus 로고
    • On modelling the development of crystallographic texture in bulk forming processes
    • Mathur K., and Dawson P.R. On modelling the development of crystallographic texture in bulk forming processes. International Journal of Plasticity 5 (1989) 67-94
    • (1989) International Journal of Plasticity , vol.5 , pp. 67-94
    • Mathur, K.1    Dawson, P.R.2
  • 30
    • 35748936590 scopus 로고    scopus 로고
    • Murat, F., Tartar, L., 1985. Optimality conditions and homogenization. In: Marino, A., Modica, L., Spagnolo, S., Deqiovannieds, M. (Eds.), Non-linear variational problems, Research Notes in Mathematics, Pitman, London.
  • 31
    • 35748984812 scopus 로고    scopus 로고
    • Press, W.H., Teukolsky, S.A., Vetterling, W.T., Flannery. B.P., 2002. Numerical Recipes in C++.
  • 32
    • 33646849451 scopus 로고    scopus 로고
    • Procedures for construction of anisotropic elastic-plastic property closures for face-centered cubic polycrystals using first-order bounding relations
    • Proust G., and Kalidindi S.R. Procedures for construction of anisotropic elastic-plastic property closures for face-centered cubic polycrystals using first-order bounding relations. Journal of the Mechanics and Physics of Solids 54 8 (2006) 1744-1762
    • (2006) Journal of the Mechanics and Physics of Solids , vol.54 , Issue.8 , pp. 1744-1762
    • Proust, G.1    Kalidindi, S.R.2
  • 34
    • 0036008016 scopus 로고    scopus 로고
    • Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction
    • Van Houtte P., Delannay L., and Kalidindi S.R. Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction. International Journal of Plasticity 18 3 (2002) 359-377
    • (2002) International Journal of Plasticity , vol.18 , Issue.3 , pp. 359-377
    • Van Houtte, P.1    Delannay, L.2    Kalidindi, S.R.3
  • 35
    • 34047151824 scopus 로고    scopus 로고
    • Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories
    • Wu X., Proust G., Knezevic M., and Kalidindi S.R. Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories. Acta Materialia 55 8 (2007) 2729-2737
    • (2007) Acta Materialia , vol.55 , Issue.8 , pp. 2729-2737
    • Wu, X.1    Proust, G.2    Knezevic, M.3    Kalidindi, S.R.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.