Effects of multiple firings on the mechanical properties and microstructure of veneering ceramics for zirconia frameworks

Journal of Dentistry

Volumn 40, Issue 5, 2012, Pages 372-380

  Tang, Xuehua ^a   Nakamura, Takashi ^a   Usami, Hirofumi ^a   Wakabayashi, Kazumichi ^a   Yatani, Hirofumi ^a  

^a OSAKA UNIVERSITY   (Japan)

Author keywords

Firing; Mechanical properties; Microstructure; Veneering ceramics; Zirconia

Indexed keywords

ALUMINUM OXIDE; ALUMINUM SILICATE; APATITE; DENTAL MATERIAL; FLUORAPATITE; GLASS CERAMICS; LEUCITE; POTASSIUM DERIVATIVE; SILICON DIOXIDE; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; CHEMISTRY; CRYSTALLIZATION; DENTAL PORCELAIN; DENTAL VENEER; DENTURE; FELDSPAR; HARDNESS; HEAT; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; MECHANICS; PLIABILITY; POROSITY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; THERMODYNAMICS; X RAY DIFFRACTION; YOUNG MODULUS;

ALUMINUM OXIDE; ALUMINUM SILICATES; APATITES; CERAMICS; CRYSTALLIZATION; DENTAL CASTING TECHNIQUE; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL VENEERS; ELASTIC MODULUS; HARDNESS; HOT TEMPERATURE; HUMANS; MATERIALS TESTING; MECHANICAL PHENOMENA; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; POROSITY; POTASSIUM COMPOUNDS; SILICON DIOXIDE; STRESS, MECHANICAL; SURFACE PROPERTIES; THERMODYNAMICS; X-RAY DIFFRACTION; ZIRCONIUM;

EID: 84862797020     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2012.01.014     Document Type: Article

References (37)

1. I. Sailer, A. Fehér, F. Filser, H. Lüthy, L.J. Gauckler, and P. Schärer Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up Quintessence International 37 2006 685 693 (Pubitemid 44475645)
2. I. Sailer, J. Gottnerb, S. Kanelb, and C.H. Hämmerle Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up International Journal of Prosthodontics 22 2009 553 560
3. F. Zarone, S. Russo, and R. Sorrentino From porcelain-fused-to-metal to zirconia: clinical and experimental considerations Dental Materials 27 2011 83 96
4. J. Fischer, B. Stawarczyk, A. Trottmann, and C.H. Hämmerle Impact of thermal misfit on shear strength of veneering ceramic/zirconia composites Dental Materials 25 2009 419 423
5. G. Isgró, O. Addison, and G.J. Fleming Transient and residual stresses in a pressable glass-ceramic before and after resin-cement coating determined using profilometry Journal of Dentistry 39 2011 368 375
6. B. Lawn, S. Bhowmick, M.B. Bush, T. Qasim, E.D. Rekow, and Y. Zhang Failure modes in ceramic-based layer structures: a basis for materials design of dental crowns Journal of the American Ceramic Society 90 2007 1671 1683 (Pubitemid 46863323)
7. M. Rosentritt, D. Steiger, M. Behr, G. Handel, and C. Kolbeck Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns Journal of Dentistry 37 2009 978 983
8. M. Abou Tara, S. Eschbach, S. Wolfart, and M. Kern Zirconia ceramic inlay-retained fixed dental prostheses - first clinical results with a new design Journal of Dentistry 39 2011 208 211
9. P.G. Coelho, N.R. Silva, E.A. Bonfante, P.C. Guess, E.D. Rekow, and V.P. Thompson Fatigue testing of two porcelain-zirconia all-ceramic crown systems Dental Materials 25 2009 1122 1127
10. F.C. Lorenzoni, L.M. Martins, N.R. Silva, P.G. Coelho, P.C. Guess, and E.A. Bonfante Fatigue life and failure modes of crowns systems with a modified framework design Journal of Dentistry 38 2010 626 634
11. B. Ohlmann, P. Rammelsberg, M. Schmitter, S. Schwarz, and O. Gabbert All-ceramic inlay-retained fixed partial dentures: preliminary results from a clinical study Journal of Dentistry 36 2008 692 696
12. F. Beuer, J. Schweiger, M. Eichberger, H.F. Kappert, W. Gernet, and D. Edelhoff High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings - a new fabrication mode for all-ceramic restorations Dental Materials 25 2009 121 128
13. S. Rues, E. Kröger, D. Müller, and M. Schmitter Effect of firing protocols on cohesive failure of all-ceramic crowns Journal of Dentistry 38 2010 987 994
14. V. Preis, M. Behr, C. Kolbeck, S. Hahnel, G. Handel, and M. Rosentritt Wear performance of substructure ceramics and veneering porcelains Dental Materials 27 2011 796 804
15. M. Baldassarri, Y. Zhang, V.P. Thompson, E.D. Rekow, and C.F. Stappert Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques Journal of Dentistry 39 2011 489 498
16. M.P. Dittmer, L. Borchers, M. Stiesch, and P. Kohorst Stresses and distortions within zirconia-fixed dental prostheses due to the veneering process Acta Biomaterialia 5 2009 3231 3239
17. M.J. Cattell, T.C. Chadwick, J.C. Knowles, R.L. Clarke, and D.Y.D. Samarawickrama The nucleation and crystallization of fine grained leucite glass-ceramics for dental applications Dental Materials 22 2006 925 933 (Pubitemid 44301465)
18. M. Borba, M.D. de Araújo, K.A. Fukushima, H.N. Yoshimura, P.F. Cesar, and J.A. Griggs Effect of the microstructure on the lifetime of dental ceramics Dental Materials 27 2011 710 721
19. J.E. Choi, J.N. Waddell, B. Torr, and M.V. Swain Pressed ceramics onto zirconia. Part 1: Comparison of crystalline phase present, adhesion to a zirconia system and flexural strength Dental Materials 27 2011 1204 1212
20. M. Kon, W.J. Brien, S.T. Rasmussen, and K. Asaoka Mechanical properties of glass-only porcelains prepared by the use of two feldspathic frits with different thermal properties Journal of Dental Research 80 2001 1758 1763 (Pubitemid 32931353)
21. X. Chen, T.C. Chadwick, R.M. Wilson, R. Hill, and M.J. Cattell Crystallization of high-strength fine-sized leucite glass-ceramics Journal of Dental Research 89 2010 1510 1516
22. J.E. Choi, J.N. Waddell, and M.V. Swain Pressed ceramics onto zirconia. Part 2: Indentation fracture and influence of cooling rate on residual stresses Dental Materials 27 2011 1111 1118
23. International Organization for Standardization. ISO 6872. Dentistry-Ceramic materials, 3rd ed. ISO; 2008.
24. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall A critical-evaluation of indentation techniques for measuring fracture-toughness: I. Direct crack measurements Journal of the American Ceramic Society 64 1981 533 538
25. B. Shah, V.K. Kakumanu, and A.K. Bansal Analytical techniques for quantification of amorphous/crystalline phases in pharmaceutical solids Journal of Pharmaceutical Sciences 95 2006 1641 1665 (Pubitemid 44229572)
26. J. Fischer, B. Stawarczyk, and C.H. Hämmerle Flexural strength of veneering ceramics for zirconia Journal of Dentistry 36 2008 316 321
27. Y. Yang, Y. Wang, W. Tian, Z. Wang, Y. Zhao, and L. Wang Reinforcing and toughening alumina/titania ceramic composites with nano-dopants from nanostructured composite powders Materials Science and Engineering A 508 2009 161 166
28. 4 ceramics synthesized by spark plasma sintering Ceramics International 37 2011 2459 2465
29. N.M. Chavan, M. Ramakrishna, P.S. Phani, D.S. Rao, and G. Sundararajan The influence of process parameters and heat treatment on the properties of cold sprayed silver coating Surface & Coatings Technology 205 2011 4798 4807
30. A.A. El-Kheshen, and M.F. Zawrah Sinterability, microstructure and properties of glass/ceramic composites Ceramics International 29 2003 251 257
31. D.G. Charlton, H.W. Roberts, and A. Tiba Measurement of select physical and mechanical properties of 3 machinable ceramic materials Quintessence International 39 2008 573 579
32. W.S. Oh, R. Delong, and K.J. Anusavice Factors affecting enamal and ceramic wear: a literature review Journal of Prosthetic Dentistry 87 2002 451 459 (Pubitemid 40433975)
33. E. Kotonasaki, N. Kantiranis, L. Papadopoulou, X. Chatzistawrou, P. Javouras, and T. Zorba Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal-ceramic restorations Dental Materials 24 2008 1362 1373
34. Y. Zhang, C. Qu, P.G. Rao, M. Lv, and J.Q. Wu Nanocrystalline seeding effect on the crystallization of two leucite precursors Journal of the American Ceramic Society 90 2007 2390 2398 (Pubitemid 47220871)
35. Y. Imanaka, S. Aoki, N. Kamehara, and K. Niwa Cristobalite phase formation in glass/ceramic composites Journal of the American Ceramic Society 78 1995 1265 1271
36. I. Szabó, B. Nagy, G. Völksch, and W. Höland Structure, chemical durability and microhardness of glass-ceramics containing apatite and leucite crystals Journal of Non-Crystalline Solids 272 2000 191 199
37. N.Y. Mostafa, A.A. Shaltout, M.S. Abdel-Aal, and A. El-maghraby Sintering mechanism of blast furnace slag-kaolin ceramics Materials & Design 31 2010 3677 3682