Transient and residual stresses in a pressable glass-ceramic before and after resin-cement coating determined using profilometry

Journal of Dentistry

Volumn 39, Issue 5, 2011, Pages 368-375

  Isgro G ^a   Addison, O ^b   Fleming, G J P ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Biaxial flexure strength; Glass ceramic; Profilometric technique; Transient and residual stresses

Indexed keywords

ALUMINUM OXIDE; BIOMEDICAL AND DENTAL MATERIALS; GLASS CERAMICS; HYDROFLUORIC ACID; IPS E.MAX PRESS; LITHIA DISILICATE; RESIN CEMENT;

ALGORITHM; ARTICLE; CEMENTATION; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; DENTAL ACID ETCHING; DENTAL ETCHING; HEAT; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PLIABILITY; SURFACE PROPERTY; TIME; TOOTH BRUSHING; TOOTH PROSTHESIS; YOUNG MODULUS;

ACID ETCHING, DENTAL; ALGORITHMS; ALUMINUM OXIDE; CEMENTATION; CERAMICS; DENTAL ETCHING; DENTAL MATERIALS; DENTAL POLISHING; DENTAL PORCELAIN; ELASTIC MODULUS; HOT TEMPERATURE; HUMANS; HYDROFLUORIC ACID; MATERIALS TESTING; PLIABILITY; RESIN CEMENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; TIME FACTORS;

EID: 79955066190     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2011.02.008     Document Type: Article

References (46)

1. F.J.T. Burke, and D.C. Watts Fracture resistance of teeth restored with dentin-bonded crowns Quintessence International 25 1994 335 340
2. F.J.T. Burke, A.J.E. Qualthrough, and R.W. Hale Dentine-bonded all-ceramic crowns: current status Journal of the American Dental Association 129 1998 455 460
3. H.R. Horn Porcelain laminate veneers bonded to etched enamel R.W. Phillips, Symposium on dental materials vol. 27 1983 Dental Clinics of North America 671 684
4. J.B. Quinn, G.D. Quinn, J.R. Kelly, and S.S. Scherrer Fractographic analyses of three ceramic whole crown restoration failures Dental Materials 21 2005 920 929 (Pubitemid 41336634)
5. J.R. Kelly, S.D. Campbell, and H.K. Bowen Fracture-surface analysis of dental ceramics Journal of Prosthetic Dentistry 62 1989 536 541
6. J.R. Kelly Clinically relevant approach to failure testing of all-ceramic restorations Journal of Prosthetic Dentistry 81 1999 652 661
7. K.J. Anusavice, and B. Hojjatie Tensile stresses in glass-ceramic crowns: effect of flaws and cement voids International Journal of Prosthodontics 5 1992 351 358
8. J.R. Mackert, and C.M. Russel Leucite crystallization during processing of a heat-pressed dental ceramic International Journal of Prosthodontics 9 1996 261 265
9. S.C. Oh, G. Donh, H. Lünthy, and P. Schärer Strength and microstructure of IPS Empress 2 glass-ceramic after different treatments International Journal of Prosthodontics 13 2000 468 472
10. M.J. Cattell, R.L. Clarke, and E.J.R. Lynch The biaxial flexural strength and reliability of four dental ceramics - Part II Journal of Dentistry 25 1997 409 414 (Pubitemid 127382106)
11. M.J. Cattell, J.C. Knowles, R.L. Clarke, and E.J.R. Lynch The biaxial flexural strength of two pressable ceramic systems Journal of Dentistry 27 1999 183 196
12. C.M. Gorman, W.E. McDevitt, and R.G. Hill Comparison of two heat-pressed all-ceramic dental materials Dental Materials 16 2000 389 395
13. L. Probster, J.G. Gerstorfer, E. Kirchner, and P. Kanjantra In vitro evaluation of a glass-ceramic dental material Journal of Oral Rehabilitation 24 1997 636 645 (Pubitemid 127732475)
14. K. Zeng, A. Oden, and D. Rowcliffe Flexure tests on dental ceramics International Journal of Prosthodontics 9 1996 434 439 (Pubitemid 126700477)
15. W.C. Wagner, and T.M. Chu Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics Journal of Prosthetic Dentistry 76 1996 140 144 (Pubitemid 126655143)
16. M. Albakry, M. Guazzato, and M.V. Swain Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials Journal of Prosthetic Dentistry 89 2003 374 380 (Pubitemid 37323893)
17. M. Albakry, M. Guazzato, and M.V. Swain Effect of sandblasting, grinding, polishing and glazing on the flexural strength of two pressable all-ceramic dental materials Journal of Dentistry 32 2004 91 99 (Pubitemid 38121634)
18. G.J.P. Fleming, F.J. Shaini, and P.M. Marquis An assessment of the influence of mixing induced variability on the bi-axial flexure strength of dentine porcelain discs and the implications for laboratory testing of porcelain specimens Dental Materials 16 2000 114 119
19. M. Guazzato, M. Albakry, S.P. Ringer, and M.V. Swain Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics Dental Materials 20 2004 441 448
20. ® Press: Scientific documentation obtained from company website www.ivoclarvivadent.us/emax/./IPS%20e. max%20Press%20Scientific%20Doc.pdf.
21. A.A. Griffith The phenomena of rupture and flow in solids Philosophical Transactions of the Royal Society 221 1921 163 198
22. J.P. Coffey, K.J. Anusavice, P.H. DeHoff, R.B. Lee, and B. Hojjatie Influence of contraction mismatch and cooling rate on flexural failure of PFM systems Journal of Dental Research 67 1988 61 65
23. G. Isgró, O. Addison, and G.J.P. Fleming Stress induced deformation of a dental ceramic following adhesive cementation Journal of Dental Research 89 2010 87 90
24. G. Isgró, O. Addison, and G.J.P. Fleming Transient and residual stresses induced during the sintering of two dentine ceramics Dental Materials 27 2010 379 385
25. Isgró G, Addison O, Fleming GJP. The deformation and strength of a dental ceramic following resin-cement coating. Journal of Dentistry, 39:122-7.
26. J.W. McLean, and T.H. Hughes The reinforcement of dental porcelain with ceramic oxides British Dental Journal 119 1965 251 267
27. I.L. Denry, and J.A. Holloway Effect of heat pressing on the mechanical properties of mica-based glass-ceramic Journal of Biomedical Materials Research B: Applied Biomaterials 70 2004 37 42 (Pubitemid 38849988)
28. J.L. Drummond, T.J. King, M.S. Bapana, and R.D. Koperski Mechanical property evaluation of pressable restorative ceramics Dental Materials 16 2000 226 233
29. O. Addison, P.M. Marquis, and G.J.P. Fleming Resin elasticity and the strengthening of all-ceramic restorations Journal of Dental Research 86 2007 519 523
30. G.J.P. Fleming, and O. Addison Adhesive cementation and the strengthening of all-ceramic dental restorations Journal of Adhesive Science and Technology 23 2009 945 959
31. O. Addison, P.M. Marquis, and G.J.P. Fleming Quantifying the strength of a resin-coated ceramic Journal of Dental Research 87 2008 542 547
32. K.A. Malament, and S.S. Socransky Survival of Dicor glass-ceramic dental restorations over 14 years: Part l. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender and age Journal of Prosthetic Dentistry 81 1999 23 32
33. K.A. Malament, and S.S. Socransky Survival of Dicor glass-ceramic dental restorations over 16 years: Part lll. Effect of luting agent and tooth or tooth-substitute core structure Journal of Prosthetic Dentistry 86 2001 511 519 (Pubitemid 33624189)
34. ® Press Product Profile obtained from company website at http://www.ivoclarvivadent.com/en/all/products/all-ceramics/ips-e- max-technicians/ips-e-max-press - 1.
35. C.H. Hsueh, M.J. Lance, and M.K. Ferber Stress distributions in thin bilayer discs subjected to ball-on-ring tests Journal of the American Ceramic Society 88 2005 1687 1690 (Pubitemid 41557958)
36. N. De Jager, P. Pallav, and A.J. Feilzer The apparent increase of the Young's modulus in thin cement layers Dental Materials 20 2004 457 462
37. W. Konig, and M. Popp Precision machining of advanced ceramics Ceramics Bulletin 68 1989 550 553
38. M.P. Rao, and F.F. Lange Factors affecting threshold strength in laminar ceramics containing thin compressive layers Journal of the American Ceramic Society 85 2002 1222 1228 (Pubitemid 34566768)
39. R. Tandon, and D.J. Green Crack stability and T-curves due to macroscopic residual compressive stress profiles Journal of the American Ceramic Society 74 1991 1981 1986
40. R. Tandon, and D.J. Green The effect of crack-growth stability induced by residual compressive stresses on strength variability Journal of Materials Research 7 1992 765 771
41. 3+ microspectroscopy measurements and modelling of local variations in surface grinding stresses in polycrystalline alumina Journal of the European Ceramic Society 30 2010 2533 2545
42. I.L. Denry, and L.A. Tarr Effect of heat treatment on microcrack healing behaviour of a machinable dental ceramic Applied Biomaterials 48 1999 791 796
43. E.K. Pavelchek, and R.H. Doremus Fracture of soda-lime glass after etching Journal of Materials Science 9 1974 1803 1808
44. T.W. Yen, R.B. Blackman, and R.J. Baez Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic Journal of Prosthetic Dentistry 70 1993 224 233
45. O. Addison, P.M. Marquis, and G.J.P. Fleming The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material Dental Materials 23 2007 461 468 (Pubitemid 46281286)
46. D. Nathanson Principles of porcelain use as an inlay/onlay material G.A. Gaber, R.E. Goldstein, Porcelain and composite inlays and onlays 1993 Quintessence Illinois 23 32