Factors affecting enamel and ceramic wear: A literature review

Journal of Prosthetic Dentistry

Volumn 87, Issue 4, 2002, Pages 451-459

  Oh, Won Suck ^a   DeLong, Ralph ^b   Anusavice, Kenneth J ^a  

^a UNIVERSITY OF FLORIDA   (United States)

^b UNIVERSITY OF MINNESOTA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ABRASION; CRYSTAL; DEGRADATION; ENAMEL; FRICTION; HARDNESS; HEAT SENSITIVITY; MEDLINE; PEER REVIEW; POROSITY; PROSTHESIS FAILURE; REVIEW; RISK FACTOR; TOOTH OCCLUSION; TOOTH PROSTHESIS; CHEMISTRY; CRYSTALLIZATION; DENTAL CARE; HUMAN; PH; SURFACE PROPERTY; TENSILE STRENGTH; TOOTH DISEASE;

CRYSTALLIZATION; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; FRICTION; HARDNESS; HUMANS; HYDROGEN-ION CONCENTRATION; POROSITY; SURFACE PROPERTIES; TENSILE STRENGTH; TOOTH ABRASION;

EID: 0036548905     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1067/mpr.2002.123851     Document Type: Article

References (100)

1. Smith BG, Bartlett DW, Robb ND. The prevalence, etiology and management of tooth wear in the United Kingdom. J Prosthet Dent 1997;78:367-72.
2. Gregory-Head B, Curtis DA. Erosion caused by gastroesophageal reflux: diagnostic considerations. J Prosthodont 1997;6:278-85.
3. Schuyler CH. Full denture service as influenced by tooth forms and materials. J Prosthet Dent 1951;1:33-7.
4. Dawson PE. Evaluation, diagnosis, and treatment of occlusal problems. 2nd ed. St. Louis: CV Mosby; 1989. p. 274-97.
5. Bauer W, van den Hoven F, Diedrich P. Wear in the upper and lower incisors in relation to incisal and condylar guidance. J Orofac Orthop 1997;58:306-19.
6. Wedel A, Borrman H, Carlsson GE. Tooth wear and temporomandibular joint morphology in a skull material from the 17th century. Swed Dent J 1998;22:85-95.
7. Monasky GE, Taylor DF. Studies on the wear of porcelain, enamel, and gold. J Prosthet Dent 1971;25:299-306.
8. Mahalick JA, Knap FJ, Weiter EJ. Occlusal wear in prosthodontics. J Am Dent Assoc 1971;82:154-9.
9. Hudson JD, Goldstein GR, Georgescu M. Enamel wear caused by three different restorative materials. J Prosthet Dent 1995;74:647-54.
10. Jagger DC, Harrison A. An in vitro investigation into the wear effects of selected restorative materials on dentine. J Oral Rehabil 1995;22:349-54.
11. Fisher RM, Moore BK, Swartz ML, Dykema RW. The effects of enamel wear on the metal-porcelain interface. J Prosthet Dent 1983;50:627-31.
12. Wiley MG. Effects of porcelain on occluding surfaces of restored teeth. J Prosthet Dent 1989;61:133-7.
13. Anusavice KJ. Phillips' science of dental materials. 10th ed. Philadelphia: WB Saunders; 1996. p. 33, 69-71, 598-600.
14. Lawn BR. A model for the wear of brittle solids under fixed abrasive conditions. Wear 1975;33:269-372.
15. Archard JF. Contact and rubbing of flat surfaces. J Appl Phys 1953;24:981-8.
16. Attin T, Koidl U, Buchalla W, Schaller HG, Kielbassa AM, Hellwig E. Correlation of microhardness and wear in differently eroded bovine dental enamel. Arch Oral Biol 1997;42:243-50.
17. Dahl BL, Oilo G. In vivo wear ranking of some restorative materials. Quintessence Int 1994;25:561-5.
18. Callister WD Jr. Materials science and engineering: an introduction. 4th ed. New York: John Wiley & Sons; 1997. p. 179-95.
19. Seghi RR, Rosenstiel SF, Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res 1991;70:221-5.
20. DeLong R, Douglas WH, Sakaguchi RL, Pintado MR. The wear of dental porcelain in an artificial mouth. Dent Mater 1986;2:214-9.
21. Westwood ARC, Latanision RM. Environment sensitive machining behavior of nonmetals. Research Institute for Advanced Studies, Martin Marietta Corporation, Baltimore. Technical report 1970;10:70-100.
22. Yap AU, Teoh SH, Hastings GW, Lu CS. Comparative wear ranking of dental restorative materials utilizing different wear simulation modes. J Oral Rehabil 1997;24:574-80.
23. Magne P, Oh WS, Pintado MR, DeLong R. Wear of enamel and veneering ceramics after laboratory and chairside finishing procedures. J Prosthet Dent 1999;82:669-79.
24. Clelland NL, Agarwala V, Knobloch LA, Seghi RR. Wear of enamel opposing low-fusing and conventional ceramic restorative materials. J Prosthodont 2001;10:8-15.
25. Suit SR, Gibbs CH, Benz ST. Study of gliding tooth contacts during mastication. J Periodontol 1976;47:331-4.
26. Jemt T, Karlsson S, Hedegard B, Mandibular movements of young adults recorded by intraorally placed light-emitting diodes. J Prosthet Dent 1979;42:669-73.
27. Norman RL. Frictional resistance and dental prosthetics. J Prosthet Dent 1964;14:45-51.
28. Harrison A. Clinical results of the measurement of occlusal wear of complete dentures. J Prosthet Dent 1976;35:504-11.
29. Harrison A. Wear of combinations of acrylic resin and porcelain, on an abrasion testing machine. J Oral Rehabil 1978;5:111-5.
30. Koran A, Craig RG, Tillitson EW. Coefficient of friction of prosthetic tooth materials. J Prosthet Dent 1972;27:269-74.
31. Miller GR, Powers JM, Ludema KC. Frictional behavior and surface failure of dental feldspathic porcelain. Wear 1975;31:30716.
32. Kaidonis JA, Richards LC, Townsend GC, Tansley GD. Wear of human enamel: a quantitative in vitro assessment. J Dent Res 1998;77:1983-90.
33. Tillitson EW, Craig RG, Peyton FA. Friction and wear of restorative dental materials. J Dent Res 1971;50:149-54.
34. Mecholsky JJ. Fracture mechanics principles. Dent Mater 1995;11:111-2.
35. Ekfeldt A, Oilo G. Occlusal contact wear of prosthodontic materials. An in vivo study. Acta Odontol Scand 1988;46:159-69.
36. Ekfeldt A, Fransson B, Soderlund B, Oilo G. Wear resistance of some prosthodontic materials in vivo. Acta Odontol Scand 1993;51:99-107.
37. Southan DE, Jorgensen KD. The endurance limit of dental porcelain. Aust Dent J 1974;19:7-11.
38. Powers JM, Allen LJ, Craig RG. Two-body abrasion of commercial and experimental restorative and coating resins and an amalgam. J Am Dent Assoc 1974;89:1118-22.
39. Koseyan GK, Biswas CP. A study of ceramic-metal restoration process. J Prosthet Dent 1976;36:694-8.
40. Griffith AA. The phenomena of rupture and flow in solids. Philos Trans R Soc (London), Sect A 1920;221:163.
41. Kelly JR, Campbell SD, Bowen HK. Fracture-surface analysis of dental ceramics. J Prosthet Dent 1989;62:536-41.
42. Morena R, Lockwood PE, Fairhurst CW. Fracture toughness of commercial dental porcelains. Dent Mater 1986;2:58-62.
43. Morena R, Beaudreau GM, Lockwood PE, Evans AL, Fairhurst CW. Fatigue of dental ceramics in a simulated oral environment. J Dent Res 1986;65:993-7.
44. Jung YG, Peterson IM, Pajares A, Lawn BR. Contact damage resistance and strength degradation of glass-infiltrated alumina and spinel ceramics. J Dent Res 1999;77:804-14.
45. al-Hiyasat AS, Saunders WP, Smith GM. Three-body wear associated with three ceramics and enamel. J Prosthet Dent 1999;82:476-81.
46. Metzler KT, Woody RD, Miller AW 3rd, Miller BH. In vitro investigation of the wear of human enamel by dental porcelain. J Prosthet Dent 1999;81:356-64.
47. Jones DW, Wilson HJ. Porosity in dental ceramics. Br Dent J 1975;138:16-21.
48. Semmelman JO. A method of measuring porosity of porcelain teeth. J Dent Res 1957;36:945-9.
49. Adair PJ, Grossman DG. The castable ceramic crown. Int J Periodontics Restorative Dent 1984;4:32-46.
50. McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J 1965;119:251-67.
51. Oilo G. Flexural strength and internal defects of some dental porcelains. Acta Odontol Scand 1988;46:313-22.
52. Claus H. The structure and microstructure of dental porcelain in relationship to the firing conditions. Int J Prosthodont 1989;2:376-84.
53. Mattmuller A, Wassmann J, Biffar R. Hydrothermal ceramic for porcelain-fused-to-metal crowns: an initial experience report from clinical practice. Quintessence Int 1996;27:521-6.
54. Piddock V. Effect of alumina concentration on the thermal diffusivity of dental porcelain. J Dent 1989;17:290-4.
55. Jacobi R, Shillingburg HT Jr, Duncanson MG Jr. A comparison of the abrasiveness of six ceramic surfaces and gold. J Prosthet Dent 1991;66:303-9.
56. Krejci I, Lutz F, Reimer M. Wear of CAD/CAM ceramic inlays: restorations, opposing cusps, and luting cements. Quintessence Int 1994;25:199-207.
57. Mackert JR Jr, Butts MB, Fairhurst CW. The effect of the leucite transformation on dental porcelain expansion. Dent Mater 1986;2:32-6.
58. Mackert JR Jr, Evans AL. Effect of cooling rate on leucite volume fraction in dental porcelains. J Dent Res 1991;70:137-9.
59. Kon M, Kawano F, Asaoka K, Matsumoto N. Effect of leucite crystals on the strength of glassy porcelain. Dent Mater J 1994;13:138-47.
60. Denry IL, Mackert JR Jr, Holloway JA, Rosenstiel SF. Effect of cubic leucite stabilization on the flexural strength of feldspathic dental porcelain. J Dent Res 1996;75:1928-35.
61. Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996;75:18-32.
62. DeLong R, Sasik C, Pintado MR, Douglas WH. The wear of enamel when opposed by ceramic systems. Dent Mater 1989;5:266-71.
63. DeLong R, Pintado MR, Douglas WH. The wear of enamel opposing shaded ceramic restorative materials: an in vitro study. J Prosthet Dent 1992;68:42-8.
64. Derand P, Vereby P. Wear of low-fusing dental porcelains. J Prosthet Dent 1999;81:460-3.
65. MacCulloch WT. Advances in dental ceramics. Br Dent J 1968;124:361-5.
66. Campbell SD. Evaluation of surface roughness and polishing techniques for new ceramic materials. J Prosthet Dent 1989;61:563-8.
67. Palmer DS, Barco MT, Pelleu GB Jr, McKinney JE. Wear of human enamel against a commercial castable ceramic restorative material. J Prosthet Dent 1991;65:192-5.
68. Charles RJ. Static fatigue of glass. J Appl Phys 1958;29:1549-53.
69. Ernsberger FM. The role of molecular water in the diffusive transport of protons in glasses. Physics Chem Glasses 1980;21:146-9.
70. Newton RG. The durability of glass - a review. Glass Technol 1985;26:21-38.
71. Anusavice KJ, Zhang NZ. Chemical durability of Dicor and fluorocana-site-based glass-ceramics. J Dent Res 1998;77:1553-9.
72. Anusavice KJ. Degradability of dental ceramics. Adv Dent Res 1992;6:82-9.
73. Anusavice KJ. Zhang NZ. Chemical durability of Dicor and lithia-based glass-ceramics. Dent Mater 1997;13:13-9.
74. Robb ND, Cruwys E, Smith BG. Is "lingual surface attrition ot the maxillary teeth (LSAMAT)" caused by dental erosion? Am J Phys Anthropol 1991;85:345-7; discussion 348-51.
75. Larsen MJ. Chemical events during tooth dissolution. J Dent Res 1990;69:575-80; discussion 634-6.
76. Wunderlich RC, Yaman P. In vitro effect of topical fluoride on dental porcelain. J Prosthet Dent 1986;55:385-8.
77. Sposetti VJ, Shen C, Levin AC. The effect of topical fluoride application on porcelain restorations. J Prosthet Dent 1986;55:677-82.
78. al-Hiyasat AS, Saunders WP, Sharkey SW, Smith GM, Gilmour WH. The abrasive effect of glazed, unglazed, and polished porcelain on the wear of human enamel, and the influence of carbonated soft drinks on the rate of wear. Int J Prosthodont 1997;10:269-82.
79. Brewer JD, Garlapo DA, Chipps EA, Tedesco LA. Clinical discrimination between autoglazed and polished porcelain surfaces. J Prosthet Dent 1990;64:631-4.
80. Sulik WD, Plekavich EJ. Surface finishing of dental porcelain. J Prosthet Dent 1981;46:217-21.
81. Haywood VB, Heymann HO, Kusy RP, Whitley JQ, Andreaus SB. Polishing porcelain veneers: an SEM and specular reflectance analysis. Dent Mater 1988;4:116-21.
82. Klausner LH, Cartwright CB, Charbeneau GT. Polished versus auto-glazed porcelain surfaces. J Prosthet Dent 1982;47:157-62.
83. Haywood VB, Heymann HO, Scurria MS. Effects of water, speed, and experimental instrumentation on finishing and polishing porcelain intraorally. Dent Mater 1989;5:185-8.
84. Goldstein GR, Barnhard BR, Penugonda B. Profilometer, SEM, and visual assessment of porcealin polishing methods. J Prosthet Dent 1991;65:627-34.
85. Grieve AR, Jeffrey IW, Sharma SJ. An evaluation of three methods of polishing porcelain by comparison of surface topography with the original glaze. Restorative Dent 1991;7:34-6.
86. Patterson CJ, McLundie AC, Stirrups DR, Taylor WG. Efficacy of a porcelain refinishing system in restoring surface finish after grinding with fine and extra-fine diamond burs. J Prosthet Dent 1992;68:402-6.
87. Hulterstrom AK, Bergman M. Polishing systems for dental ceramics. Acta Odontol Scand 1993;51:229-34.
88. Scurria MS, Powers JM. Surface roughness of two polished ceramic materials. J Prosthet Dent 1994;71:174-7.
89. Ward MT, Tate WH, Powers JM. Surface roughness of opalescent porcelains after polishing. Oper Dent 1995;20:106-10.
90. Kawai K, Urano M, Ebisu S. Effect of surface roughness of porcelain on adhesion of bacteria and their synthesizing glucans. J Prosthet Dent 2000;83:664-7.
91. Fairhurst CW, Lockwood PE, Ringle RD, Thompson WO. The effect of glaze on porcelain strength. Dent Mater 1992;8:203-7.
92. Rosenstiel SF, Baiker MA, Johnston WM. A comparison of glazed and polished dental porcelain. Int J Prosthodont 1989;2:524-9.
93. Mackert JR Jr, Twiggs SW, Evans-Williams AL. Isothermal anneal effect on leucite content in dental porcelains. J Dent Res 1995;74:1259-65.
94. Mackert JR Jr, Williams AL. Microcracks in dental porcelain and their behavior during multiple firing. J Dent Res 1996;75:1484-90.
95. Krejci I, Lutz F, Reimer M, Heinzmann JL. Wear of ceramic inlays, their enamel antagonists, and luting cements. J Prosthet Dent 1993;69:425-30.
96. Jagger DC, Harrison A. An in vitro investigation into the wear effects of unglazed, glazed, and polished porcelain on human enamel. J Prosthet Dent 1994;72:320-3.
97. Tuccillo JJ. Thermal and firing effects in porcelain. Thermatrol Tech 1969;23:1.
98. Hobo S. Distortion of occlusal porcelain during glazing. J Prosthet Dent 1982;47:154-6.
99. Douglas HB Jr, Moon PC, Eshleman JR, Lutins ND. The occlusal dimensional change upon glazing porcelain. J Dent Res 1981;60:828-9.
100. Baharav H, Laufer BZ, Pilo R, Cardash HS. Effect of glaze thickness on the fracture toughness and hardness of alumina-reinforced porcelain. J Prosthet Dent 1999;81:515-9.