High-performance nanocomposites based on polyetherketones

Progress in Materials Science

Volumn 57, Issue 7, 2012, Pages 1106-1190

  Díez Pascual, Ana M ^a   Naffakh, Mohammed ^a   Marco, Carlos ^a   Ellis, Gary ^a   Gómez Fatou, Marián A ^a  

^a INSTITUTO DE CIENCIA Y TECNOLOGÍA DE POLÍMEROS   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON-BASED; COEFFICIENT OF FRICTIONS; CONVENTIONAL TECHNIQUES; COVALENT GRAFTING; FLAME RETARDANCY; FUNCTIONALIZATIONS; HIGH TEMPERATURE; IN-FIELD; INORGANIC NANOPARTICLE; MECHANOCHEMICAL TREATMENT; MULTIFUNCTIONAL NANOCOMPOSITES; NANO-FILLERS; NANOFILLER; NEAT POLYMER; POLYETHERKETONES; POTENTIAL APPLICATIONS; PRE-PROCESSING; PREPARATION AND PROCESSING; RESULTING MATERIALS; SOLVENT RESISTANCE; STRUCTURE AND PROPERTIES; TECHNOLOGICAL APPLICATIONS; THERMO-OXIDATIVE STABILITY; THERMOPLASTIC MATERIALS; TRIBOLOGICAL PROPERTIES;

CARBON; CHEMICAL INDUSTRY; CHEMICAL STABILITY; COMPRESSION MOLDING; ETHERS; LOADING; MECHANICAL PROPERTIES; NANOPARTICLES; NANOTUBES; ORGANIC SOLVENTS; POLYMERS; THERMAL CONDUCTIVITY;

NANOCOMPOSITES;

EID: 84860270751     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2012.03.003     Document Type: Review

References (303)

1. N.G. Sahoo, S. Rana, J.W. Cho, L. Li, and S.H. Chan Polymer nanocomposites based on functionalized carbon nanotubes Prog Polym Sci 35 7 2010 837 867
2. G. Kickelbick Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale Prog Polym Sci 28 1 2003 83 114
3. E. Manias Nanocomposites: stiffer by design Nat Mater 6 1 2007 9 11
4. A. Rahman, I. Ali, S.M. Al Zahrani, and R.H. Eleithy A review of the applications of nanocarbon polymer composites Nano 6 3 2011 185 203
5. E.T. Thostenson, Z. Ren, and T.-W. Chou Advances in the science and technology of carbon nanotubes and their composites: a review Compos Sci Technol 61 13 2001 1899 1912
6. M. Moniruzzaman, and K.I. Winey Polymer nanocomposites containing carbon nanotubes Macromolecules 39 16 2006 5194 5205
7. P.A. Staniland Poly(ether ketone)s G. Allen, J.C. Bevington, Comprehensive Polymer Science Vol. 5 1989 Pergamon Press New York 484 497
8. Dahl KJ, Jansons V. Polymers and other advanced materials: emerging technologies and business opportunities, vols. 69-81. New York: P.N. Prasad ed., Plenum Press; 1995. p. 69-81.
9. T.E. Attwood, P.C. Dawson, J.L. Freeman, L.R.J. Hoy, J.B. Rose, and P.A. Staniland Synthesis and properties of polyaryletherketones Polymer 22 8 1981 1096 1103
10. A.M. Díez-Pascual, G. Martínez, and M.A. Gómez Synthesis and characterization of poly(ether ether ketone) derivatives obtained by carbonyl reduction Macromolecules 42 18 2009 6885 6892
11. S.J. Oh, H.J. Lee, D.K. Keum, S.W. Lee, D.H. Wang, and S.Y. Park Multiwalled carbon nanotubes and nanofibers grafted with polyetherketones in mild and viscous polymeric acid Polymer 47 4 2006 1132 1140
12. A.M. Díez-Pascual, M. Naffakh, M.A. Gómez, C. Marco, G. Ellis, and J.M. Gonzalez-Domínguez The influence of a compatibilizer on the thermal and dynamic mechanical properties of PEEK/carbon nanotube composites Nanotechnology 20 31 2009 315707 315720
13. A.M. Díez-Pascual, M. Naffakh, J.M. González- Domínguez, A. Ansón, Y. Martínez-Rubi, and M.T. Martínez High performance PEEK/carbon nanotube composites compatibilized with polysulfones-I. Structure and thermal properties Carbon 48 12 2010 3485 3499
14. N.C. Frederic Thermoplastic aromatic polymer composites 1992 Butterworth Heinemann Ltd. Oxford
15. A.J. Lovinger, and D.D. Davis Solution crystallization of poly(ether ether ketone) Macromolecules 19 7 1986 1861 1867
16. D.J. Blundell, and B.N. Osborn The morphology of poly(aryl-ether-ether- ketone) Polymer 24 8 1983 953 958
17. V.L. Rao Polyether ketones J Macromol Sci, Part C: Polym Rev 35 4 1995 661 712
18. Victrex, plc. Product Data Sheet, Victrex PEEK, 2011. < http://www.victrex.com/ >.
19. Ticona engineering polymers. Product data sheet, PPS Fortron, 2011. < http://www.ticona.com/ >.
20. Sabic innovative plastics. Product data sheet, Ultem PEI, 2011. < http://www.sabic-ip.com >.
21. Bonner WH. Aromatic polyketones and preparation thereof. US Patent 3065205; 1962.
22. Y. Sakaguchi, M. Tokai, and Y. Kato Synthesis of poly(ether ketone) by Friedel-Crafts acylation: effects of reaction conditions Polymer 34 7 1993 1512 1515
23. R.N. Johnson, A.G. Farnham, R.A. Clendinning, W.F. Hale, and C.N. Merriam Poly(aryl ethers) by nucleophilic aromatic substitution. I. Synthesis and properties J Polym Sci, Part A: Polym Chem 5 9 1967 2375 2398
24. O.B. Searle, and R.H. Pfeiffer Victrex® poly(ethersulfone) (PES) and Victrex® poly(etheretherketone) (PEEK) Polym Eng Sci 25 8 1985 474 476
25. D.P. Jones, D.C. Leach, and D.R. Moore Mechanical properties of poly(ether-ether-ketone) for engineering applications Polymer 26 9 1985 1385 1393
26. K.H. Gardner, B.S. Hsiao, R.R. Matheson, and B.A. Wood Structure, crystallization and morphology of poly (aryl ether ketone ketone) Polymer 33 12 1992 2483 2495
27. V.N. Popov Carbon nanotubes: Properties and application Mater Sci Eng R 43 3 2004 61 102
28. E. Dervishi, Z. Li, Y. Xu, V. Saini, A.R. Biris, and D. Lupu Carbon nanotubes: Synthesis, properties, and applications Particul Sci Technol 27 2 2009 107 125
29. S.C. Tsang, Y.K. Chen, P.J.F. Harris, and M.L.H. Green A simple chemical method of opening and filling carbon nanotubes Nature 372 6502 1994 159 162
30. W. Huang, Y. Lin, S. Taylor, J. Gaillard, A.M. Rao, and Y.-P. Sun Sonication-assisted functionalization and solubilization of carbon nanotubes Nano Lett 2 3 2002 231 234
31. P.-C. Ma, N.A. Siddiqui, G. Marom, and J.-K. Kim Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review Composites Part A 41 10 2010 1345 1367
32. J.Y. Choi, S.J. Oh, H.J. Lee, D.H. Wang, L.S. Tan, and J.B. Baek In-situ grafting of hyperbranched poly(ether ketone)s onto multiwalled carbon nanotubes via the A3 + B2 approach Macromolecules 40 13 2007 4474 4480
33. I.Y. Jeon, L.S. Tan, and J.B. Baek Nanocomposites derived from in situ grafting of linear and hyperbranched poly(ether-ketone)s containing flexible oxyethylene spacers onto the surface of multiwalled carbon nanotubes J Polym Sci, Part A: Polym Chem 46 11 2008 3471 3481
34. R. Jain, Y.H. Choi, Y. Liu, M.L. Minus, H.G. Chae, and S. Kumar Processing, structure and properties of poly(ether ketone) grafted few wall carbon nanotube composite fibers Polymer 51 17 2010 3940 3947
35. Y. Du, N. Hu, H. Zhou, P. Li, P. Zhang, and X. Zhao Dispersion of multi-walled carbon nanotubes in poly(aryl ether ketone) obtained by in situ polymerization Polym Int 58 7 2009 832 837
36. M.R. Babaa, J.L. Bantignies, L. Alvarez, P. Parent, F. Le Normande, and M. Gulas NEXAFS study of multi-walled carbon nanotubes functionalization with sulfonated poly(ether ether ketone) chains J Nanosci Nanotechnol 7 10 2007 3463 3467
37. E. Abou-Hamad, M.-R. Babaa, and C. Goze-Bac NMR evidence of the diamagnetic interaction between carbon nanotubes functionalized with polymer chains J Appl Phys 106 2 2009 023915 23919
38. A.M. Díez-Pascual, G. Martínez, J.M. González- Domínguez, A. Ansón, M.T. Martínez, and M.A. Gómez Grafting of a hydroxylated poly(ether ether ketone) to the surface of single-walled carbon nanotubes J Mater Chem 20 38 2010 8285 8296
39. A.M. Díez-Pascual, G. Martínez, M.T. Martínez, and M.A. Gómez Novel nanocomposites reinforced with hydroxylated poly(ether ether ketone)-grafted carbon nanotubes J Mater Chem 20 38 2010 8247 8256
40. X. Zhou, X. Xie, F. Zeng, R.K. Li, and Y.W. Mai Properties of polypropylene/carbon nanotube composites compatibilized by maleic anhydride grafted SEBS Key Eng Mater 321 2006 223 228
41. A.M. Díez-Pascual, J.M. González-Domínguez, Y. Martínez-Rubi, M. Naffakh, A. Ansón, and M.T. Martínez Synthesis and properties of PEEK/carbon nanotube nanocomposites M. Vikas, Polymer nanotube nanocomposites: synthesis, properties and applications 2010 Wiley/Scrivener publishing LLC Massachusetts 281 313
42. A.M. Díez-Pascual, M. Naffakh, J.M. González- Domínguez, A. Ansón, Y. Martínez-Rubi, and M.T. Martínez High performance PEEK/carbon nanotube composites compatibilized with polysulfones-II. Mechanical and electrical properties Carbon 48 12 2010 3500 3511
43. A.M. Díez-Pascual, M. Naffakh, M.A. Gómez, C. Marco, G. Ellis, and M.T. Martínez Development and characterization of PEEK/carbon nanotube composites Carbon 47 13 2009 3079 3090
44. Kumar R, Isayev AI, Lewis T. Processing and characterization of PEEK/MWNT nanocomposites prepared by high power ultrasonic waves. In: 68th Annual technical conference on the society of plastics engineers, Orlando, FL; 2010. p. 1570-4.
45. A.M. Díez-Pascual, B. Ashrafi, M. Naffakh, J.M. González-Domínguez, A. Johnston, and B. Simard Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates Carbon 49 8 2011 2817 2833
46. D.S. Bangarusampath, H. Ruckdäschel, V. Altstädt, J.K.W. Sandler, D. Garray, and M.S.P. Shaffer Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites Polymer 50 24 2009 5803 5811
47. F. Deng, T. Ogasawara, and N. Takeda Evaluating the orientation and dispersion of carbon nanotubes inside nanocomposites by a focused-ion-beam technique Mater Lett 61 29 2007 5095 5097
48. S. Kumar, D.P. Anderson, and W.W. Adams Crystallization and morphology of poly(aryl-ether-ether-ketone) Polymer 27 3 1986 329 336
49. B.-R. Cho, and J.L. Kardos Consolidation and self-bonding in poly(ether ether ketone) (PEEK) J Appl Polym Sci 56 11 1995 1435 1454
50. M. Liang, C. Lu, Y. Huang, and C. Zhang Morphological and structural development of poly(ether ether ketone) during mechanical pulverization J Appl Polym Sci 106 6 2007 3895 3902
51. Y. Kong, and J.N. Hay The measurement of the crystallinity of polymers by DSC Polymer 43 14 2002 3873 3878
52. P. Iannelli Molecular structure refinement of poly(aryl ether ether ketone) by means of the whole fiber X-ray diffraction pattern analysis Macromolecules 26 9 1993 2309 2314
53. B.S. Hsiao, K.H. Gardner, D.Q. Wu, and B. Chu Time-resolved X-ray study of poly(aryl ether ether ketone) crystallization and melting behaviour: 1. Crystallization Polymer 34 19 1993 3986 3995
54. A.M. Jonas, T.P. Russell, and D.Y. Yoon Synchrotron X-ray scattering studies of crystallization of poly(ether-ether-ketone) from the glass and structural changes during subsequent heating-cooling processes Macromolecules 28 25 1995 8491 8503
55. C. Fougnies, P. Damman, D. Villers, M. Dosière, and M.H.J. Koch Time-resolved SAXS, WAXS, and DSC study of the annealing of poly(aryl ether ether ketone) (PEEK) from the glassy state Macromolecules 30 5 1997 1385 1391
56. Y.Z. Meng, and S.C. Tjong Facile synthesis and properties of semicrystalline copoly(arylene ether ketone) containing hydroquinone and phthalazinone J Appl Polym Sci 81 11 2001 2687 2695
57. M. Naffakh, M.A. Gómez, G. Ellis, and C. Marco Isothermal crystallization kinetics of PEEK/Vectra® blends by DSC and time-resolved synchrotron X-ray diffraction Polym Eng Sci 46 10 2006 1411 1418
58. I.M. Salin, and J.C. Seferis Kinetic analysis of high-resolution TGA variable heating rate data J Appl Polym Sci 47 5 1993 847 856
59. Y.N. Gupta, A. Chakraborty, G.D. Pandey, and D.K. Setua Thermal and thermooxidative degradation of engineering thermoplastics and life estimation J Appl Polym Sci 92 3 2004 1737 1748
60. A.J. Lovinger, and D.D. Davis Electron-microscopic investigation of the morphology of a melt-crystallized polyaryletherketone J Appl Phys 58 8 1985 2843 2853
61. J. Wang, X. Yang, G. Li, and E. Zhou Isothermal and nonisothermal crystallization of poly(aryl ether ketone ketone) with all-para phenylene linkage J Appl Polym Sci 82 14 2001 3431 3438
62. G. Zhao, Y. Men, Z. Wu, X. Ji, and W. Jiang Effect of shear on the crystallization of the poly(ether ether ketone) J Polym Sci, Part B: Polym Phys 48 2 2010 220 225
63. Y. Lee, J.-M. Lefebvre, and R.S. Porter Uniaxial draw of poly(aryl-ether-ether-ketone) by solid state extrusion J Polym Sci, Part B: Polym Phys 26 4 1988 795 805
64. A.M. Voice, D.I. Bower, and I.M. Ward Molecular orientation in uniaxially drawn poly(aryl ether ether ketone): 1. Refractive index and X-ray measurements Polymer 34 6 1993 1154 1163
65. S. Wang, J. Wang, T. Liu, Z. Mo, H. Zhang, and D. Yang The crystal structure and drawing-induced polymorphism in poly(aryl ether ketone)s, 2. Poly(ether ether ketone ketone), PEEKK. Macromol Chem Phys 198 4 1997 969 982
66. T. Liu, S. Wang, Z. Mo, and H. Zhang Crystal structure and drawing-induced polymorphism in poly(aryl ether ether ketone). IV J Appl Polym Sci 73 2 1999 237 243
67. Q. Lu, Z. Yang, X. Li, and S. Jin Synthesis, morphology, and melting behavior of poly(ether ether ketone) of different molecular weights J Appl Polym Sci 114 4 2009 2060 2070
68. W.G. Kampert, and B.B. Sauer Temperature modulated DSC studies of melting and recrystallization in poly (oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4- phenylene) (PEEK) Polym Eng Sci 41 10 2001 1714 1730
69. D.J.Y.S. Pagé, H.W. Bonin, V.T. Bui, and P.J. Bates Mixed radiation field effects from a nuclear reactor on poly(aryl ether ether ketone): A melt viscosity study J Appl Polym Sci 86 11 2002 2713 2719
70. C. Fougnies, M. Dosière, M.H.J. Koch, and J. Roovers Morphological study and melting behavior of narrow molecular weight fractions of poly(aryl ether ether ketone) (PEEK) annealed from the glassy state Macromolecules 31 18 1998 6266 6274
71. C.N. Velisaris, and J.C. Seferis Crystallization kinetics of polyetheretherketone (PEEK) matrices Polym Eng Sci 26 22 1986 1574 1581
72. A. Jonas, and R. Legras Thermal stability and crystallization of poly(aryl ether ether ketone) Polymer 32 15 1991 2691 2706
73. M. Day, Y. Deslandes, J. Roovers, and T. Suprunchuk Effect of molecular weight on the crystallization behaviour of poly(aryl ether ether ketone): a differential scanning calorimetry study Polymer 32 7 1991 1258 1266
74. M. Chen, and J.-Y. Chen Analysis of crystallization kinetics of poly(ether ether ketone) J Polym Sci, Part B: Polym Phys 36 8 1998 1335 1348
75. F.J. Medellín-Rodríguez, and P.J. Phillips Bulk crystallization of poly(aryl ether ether ketone) (PEEK) Polym Eng Sci 36 5 1996 703 712
76. D.C. Bassett, R.H. Olley, and I.A.M. Al Raheil On crystallization phenomena in PEEK Polymer 29 10 1988 1745 1754
77. D.J. Blundell On the interpretation of multiple melting peaks in poly(ether ether ketone) Polymer 28 13 1987 2248 2251
78. Y. Lee, R.S. Porter, and J.S. Lin On the double-melting behavior of poly(ether ether ketone) Macromolecules 22 4 1989 1756 1760
79. C.-L. Wei, M. Chen, and F.-E. Yu Temperature modulated DSC and DSC studies on the origin of double melting peaks in poly(ether ether ketone) Polymer 44 26 2003 8185 8193
80. D.A. Ivanov, R. Legras, and A.M. Jonas The crystallization of poly(aryl-ether-ether-ketone) (PEEK): reorganization processes during gradual reheating of cold-crystallized samples Polymer 41 10 2000 3719 3727
81. H. Marand, A. Alizadeh, R. Farmer, R. Desai, and V. Velikov Influence of structural and topological constraints on the crystallization and melting behavior of polymers. 2. Poly(arylene ether ether ketone) Macromolecules 33 9 2000 3392 3403
82. M.P. Lattimer, J.K. Hobbs, M.J. Hill, and P.J. Barham On the origin of the multiple endotherms in PEEK Polymer 33 18 1992 3971 3973
83. R. Verma, H. Marand, and B. Hsiao Morphological changes during secondary crystallization and subsequent melting in poly(ether ether ketone) as studied by real time small angle X-ray scattering Macromolecules 29 24 1996 7767 7775
84. J. Wang, M. Alvarez, W. Zhang, Z. Wu, Y. Li, and B. Chu Synchrotron small-angle X-ray scattering study of crystalline structures and isothermal crystallization kinetics of poly(aryl ether ether ketones) Macromolecules 25 25 1992 6943 6951
85. K.N. Krueger, and H.G. Zachmann Investigation of the melting behavior of poly(aryl ether ketones) by simultaneous measurements of SAXS and WAXS employing synchrotron radiation Macromolecules 26 19 1993 5202 5208
86. M. Day, T. Suprunchuk, J.D. Cooney, and D.M. Wiles Thermal degradation of poly(aryl-ether-ether-ketone) (PEEK): A differential scanning calorimetry study J Appl Polym Sci 36 5 1988 1097 1106
87. Y. Lee, and R.S. Porter Effects of thermal history on crystallization of poly(ether ether ketone) (PEEK) Macromolecules 21 9 1988 2770 2776
88. M. Day, D. Sally, and D.M. Wiles Thermal degradation of poly(aryl-ether-ether-ketone): Experimental evaluation of crosslinking reactions J Appl Polym Sci 40 9-10 1990 1615 1625
89. G.-W. Lee, S. Jagannathan, H.G. Chae, M.L. Minus, and S. Kumar Carbon nanotube dispersion and exfoliation in polypropylene and structure and properties of the resulting composites Polymer 49 7 2008 1831 1840
90. A.R. Bhattacharyya, T.V. Sreekumar, T. Liu, S. Kumar, L.M. Ericson, and R.H. Hauge Crystallization and orientation studies in polypropylene/single wall carbon nanotube composite Polymer 44 8 2003 2373 2377
91. L. Li, C.Y. Li, C. Ni, L. Rong, and B. Hsiao Structure and crystallization behavior of nylon 66/multi-walled carbon nanotube nanocomposites at low carbon nanotube contents Polymer 48 12 2007 3452 3460
92. J. Jin, M. Song, and F. Pan A DSC study of effect of carbon nanotubes on crystallisation behaviour of poly(ethylene oxide) Thermochim Acta 456 1 2007 25 31
93. M.J. Jenkins Crystallisation in miscible blends of PEEK and PEI Polymer 42 5 2001 1981 1986
94. G. Crevecoeur, and G. Groeninckx Binary blends of poly (ether ether ketone) and poly (ether imide). Miscibility, crystallization behavior, and semicrystalline morphology Macromolecules 24 5 1991 1190 1195
95. A. Dobreva, and I. Gutzow Activity of substrates in the catalyzed nucleation of glass-forming melts: I. Theory J Non-Cryst Sol 162 1-2 1993 1 12
96. A. Dobreva, and I. Gutzow Activity of substrates in the catalyzed nucleation of glass-forming melts. II. Experimental evidence J Non-Cryst Sol 162 1-2 1993 13 25
97. H.E. Kissinger Variation of Peak temperature with heating rate in differential thermal analysis J Res Bur Stand 57 1956 217 221
98. T.F. Conceição, J.R. Bertolino, G.M.O. Barra, and A.T.N. Pires Poly (ether ether ketone) derivatives: Synthetic route and characterization of nitrated and sulfonated polymers Mater Sci Eng C 29 2 2009 575 582
99. P. Xing, G.P. Robertson, M.D. Guiver, S.D. Mikhailenko, K. Wang, and S. Kaliaguine Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes J Membr Sci 229 1-2 2004 95 106
100. C. Rong, G. Ma, S. Zhang, L. Song, Z. Chen, and G. Wang Effect of carbon nanotubes on the mechanical properties and crystallization behavior of poly(ether ether ketone) Compos Sci Technol 70 2 2010 380 386
101. M. Day, J.D. Cooney, and D.M. Wiles The thermal stability of poly(aryl-ether-ether-ketone) as assessed by thermogravimetry J Appl Polym Sci 38 2 1989 323 337
102. J.N. Hay, and D.J. Kemmish Thermal decomposition of poly(aryl ether ketones) Polymer 28 12 1987 2047 2051
103. S. Shenogin, A. Bodapati, L. Xue, R. Ozisik, and P. Keblinski Effect of chemical functionalization on thermal transport of carbon nanotube composites Appl Phys Lett 85 12 2004 2229 2231
104. B. Nandan, L.D. Kandpal, and G.N. Mathur Poly(ether ether ketone)/poly(aryl ether sulphone) blends: thermal degradation behaviour Eur Polym J 39 1 2003 193 198
105. X.H. Yan, Y. Xiao, and Z.M. Li Effects of intertube coupling and tube chirality on thermal transport of carbon nanotubes J Appl Phys 99 12 2006 124305 124309
106. F. Deng, T. Ogasawara, and N. Takeda Tensile properties at different temperature and observation of micro deformation of carbon nanotubes-poly(ether ether ketone) composites Compos Sci Technol 67 14 2007 2959 2964
107. J.N. Coleman, U. Khan, W.J. Blau, and Y.K. Gun'ko Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites Carbon 44 9 2006 1624 1652
108. K. Wang, L. Chen, J. Wu, M.L. Toh, C. He, and A.F. Yee Epoxy nanocomposites with highly exfoliated clay: mechanical properties and fracture mechanisms Macromolecules 38 3 2005 788 800
109. J.P. Salvetat, J.M. Bonard, N.B. Thomson, A.J. Kulik, L. Forró, and W. Benoit Mechanical properties of carbon nanotubes Appl Phys A: Mater Sci Process 69 3 1999 255 260
110. P.G. Jang, K.S. Suh, M. Park, J.K. Kim, W.N. Kim, and H.G. Yoon Electrical behavior of polyurethane composites with acid treatment-induced damage to multiwalled carbon nanotubes J Appl Polym Sci 106 1 2007 110 116
111. R.W. Haskins, R.S. Maier, R.M. Ebeling, C.P. Marsh, D.L. Majure, and A.J. Bednar Tight-binding molecular dynamics study of the role of defects on carbon nanotube moduli and failure J Chem Phys 127 7 2007 074708 74710
112. J. Li, and L.Q. Zhang The research on the mechanical and tribological properties of carbon fiber and carbon nanotube-filled PEEK composite Polym Compos 31 8 2010 1315 1320
113. T. Ogasawara, T. Tsuda, and N. Takeda Stress-strain behavior of multi-walled carbon nanotube/PEEK composites Compos Sci Technol 71 2 2011 73 78
114. A. Nogales, T.A. Ezquerra, Z. Denchev, I. Šics, F.J.B. Calleja, and B.S. Hsiao Molecular dynamics and microstructure development during cold crystallization in poly(ether-ether-ketone) as revealed by real time dielectric and X-ray methods J Chem Phys 115 8 2001 3804 3813
115. A. Gupta, and V. Choudhary Effect of multiwall carbon nanotubes on thermomechanical and electrical properties of poly(trimethylene terephthalate) J Appl Polym Sci 123 3 2012 1548 1556
116. F.H. Gojny, M.H.G. Wichmann, B. Fiedler, W. Bauhofer, and K. Schulte Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites Composites Part A 36 11 2005 1525 1535
117. T. Tsuda, T. Ogasawara, F. Deng, and N. Takeda Direct measurements of interfacial shear strength of multi-walled carbon nanotube / PEEK composite using a nano-pullout method Compos Sci Technol 71 10 2011 1295 1300
118. S.B. Kharchenko, J.F. Douglas, J. Obrzut, E.A. Grulke, and K.B. Migler Flow-induced properties of nanotube-filled polymer materials Nat Mater 3 8 2004 564 568
119. P. Pötschke, M. Abdel-Goad, I. Alig, S.M. Dudkin, and D. Lellinger Rheological and dielectrical characterization of melt mixed polycarbonate- multiwalled carbon nanotube composites Polymer 45 26 2004 8863 8870
120. P. Werner, R. Verdejo, F. Wöllecke, V. Altstädt, J.K.W. Sandler, and M.S.P. Shaffer Carbon nanofibers allow foaming of semicrystalline poly(ether ether ketone) Adv Mater 17 23 2005 2864 2869
121. W. Bauhofer, and J.Z. Kovacs A review and analysis of electrical percolation in carbon nanotube polymer composites Compos Sci Technol 69 10 2009 1486 1498
122. O. Breuer, and U. Sundararaj Big returns from small fibers: A review of polymer/carbon nanotube composites Polym Compos 25 6 2004 630 645
123. A. Celzard, E. McRae, C. Deleuze, M. Dufort, G. Furdin, and J.F. Marêché Critical concentration in percolating systems containing a high-aspect-ratio filler Phys Rev B 53 10 1996 6209 6214
124. J.Z. Kovacs, B.S. Velagala, K. Schulte, and W. Bauhofer Two percolation thresholds in carbon nanotube epoxy composites Compos Sci Technol 67 5 2007 922 928
125. P. Pötschke, S.M. Dudkin, and I. Alig Dielectric spectroscopy on melt processed polycarbonate-multiwalled carbon nanotube composites Polymer 44 17 2003 5023 5030
126. F. Du, R.C. Scogna, W. Zhou, S. Brand, J.E. Fischer, and K.I. Winey Nanotube networks in polymer nanocomposites: rheology and electrical conductivity Macromolecules 37 24 2004 9048 9055
127. D.S. Bangarusampath, H. Ruckdäschel, V. Altstädt, J.K.W. Sandler, D. Garray, and M.S.P. Shaffer Rheological and electrical percolation in melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites Chem Phys Lett 482 1-3 2009 105 109
128. Y.P. Mamunya, V.V. Davydenko, P. Pissis, and E.V. Lebedev Electrical and thermal conductivity of polymers filled with metal powders Eur Polym J 38 9 2002 1887 1897
129. C.W. Nan, G. Liu, Y. Lin, and M. Li Interface effect on thermal conductivity of carbon nanotube composites Appl Phys Lett 85 16 2004 3549 3551
130. K. Friedrich, Z. Lu, and A.M. Häger Overview on polymer composites for friction and wear application Theor Appl Fract Mech 19 1 1993 1 11
131. K. Friedrich, Z. Lu, and A.M. Häger Recent advances in polymer composites' tribology Wear 190 2 1995 139 144
132. F. Oster, F. Haupert, K. Friedrich, M. Müller, and W. Bickle New polyetheretherketone-based coatings for severe tribological applications Mater Sci Eng Technol 35 10-11 2004 690 695
133. J. Li, and L.Q. Zhang Reinforcing effect of carbon nanotubes on PEEK composite filled with carbon fibre Mater Sci Technol 27 1 2011 252 256
134. D. Chen, K.O. Christensen, E. Ochoa-Fernández, Z. Yu, B. Totdal, and N. Latorre Synthesis of carbon nanofibers: effects of Ni crystal size during methane decomposition J Catal 229 1 2005 82 96
135. W. Xia, D. Su, A. Birkner, L. Ruppel, Y. Wang, and C. Wöll Chemical vapor deposition and synthesis on carbon nanofibers: sintering of ferrocene-derived supported iron nanoparticles and the catalytic growth of secondary carbon nanofibers Chem Mater 17 23 2005 5737 5742
136. T.G. Ros, A.J. van Dillen, J.W. Geus, and D.C. Koningsberger Surface oxidation of carbon nanofibres Chem Eur J 8 5 2002 1151 1162
137. H. Ruckdäschel, J.K.W. Sandler, and V. Altstädt On the friction and wear of carbon nanofiber-reinforced PEEK-based polymer composites Tribol Interf Eng 55 2008 149 208
138. E. Hammel, X. Tang, M. Trampert, T. Schmitt, K. Mauthner, and A. Eder Carbon nanofibers for composite applications Carbon 42 5-6 2004 1153 1158
139. G.G. Tibbetts, M.L. Lake, K.L. Strong, and B.P. Rice A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites Compos Sci Technol 67 7-8 2007 1709 1718
140. J. Li, R. Luo, and Y. Yan Effect of carbon nanofibers on the infiltration and thermal conductivity of carbon/carbon composites Mater Res Bull 46 9 2011 1437 1442
141. M. Endo, T. Koyama, and Y. Hishiyama Structure improvement of carbon fibers prepared from benzene Jpn J Appl Phys 15 11 1976 2073 2076
142. Z. Zhou, C. Lai, L. Zhang, Y. Qian, H. Hou, and D.H. Reneker Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties Polymer 50 13 2009 2999 3006
143. Ozkan T, Naraghi M, Polycarpou AA, Chasiotis I. Mechanical strength of pyrolytically stripped and functionalized heat treated vapor grown carbon nanofibers. In: 11th International congress and exhibition on experimental and applied mechanics 2008, Orlando, FL; 2008. p. 1108-13.
144. M.M. Hasan, Y. Zhou, and S. Jeelani Thermal and tensile properties of aligned carbon nanofiber reinforced polypropylene Mater Lett 61 4-5 2007 1134 1136
145. S. Lee, M.S. Kim, and A.A. Ogale Influence of carbon nanofiber structure on properties of linear low density polyethylene composites Polym Eng Sci 50 1 2010 93 99
146. Liao CZ, Tjong SC. Fabrication, mechanical properties and fracture toughness of thermoplastic polyolefin filled with carbon nanofibers. In: 3rd International nanoelectronics conference, Hongkong; 2010. p. 527-8.
147. J. Sandler, P. Werner, M.S.P. Shaffer, V. Demchuk, V. Altstädt, and A.H. Windle Carbon-nanofibre-reinforced poly(ether ether ketone) composites Composites Part A 33 8 2002 1033 1039
148. J. Sandler, A.H. Windle, P. Werner, V. Altstädt, M.V. Es, and M.S.P. Shaffer Carbon-nanofibre-reinforced poly(ether ether ketone) fibres J Mater Sci 38 10 2003 2135 2141
149. S.H. Modi, K.B. Dikovics, H. Gevgilili, G. Mago, S.F. Bartolucci, and F.T. Fisher Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity Polymer 51 22 2010 5236 5244
150. R. Verdejo, P. Werner, J. Sandler, V. Altstädt, and M.S.P. Shaffer Morphology and properties of injection-moulded carbon-nanofibre poly(etheretherketone) foams J Mater Sci 44 6 2009 1427 1434
151. Bartolucci S, Mago G, Gevgilili H, Vural S, Dikovics K, Kalyon D. Investigation of the properties of PEEK-nanotube composites prepared by solution methods. In: Proceedings of the ASME international mechanical engineering congress and exposition, Florida; 2010. p. 279-82.
152. A.J. Waddon, M.J. Hill, A. Keller, and D.J. Blundell On the crystal texture of linear polyaryls (PEEK, PEK and PPS) J Mater Sci 22 5 1987 1773 1784
153. Z. Hanmin, Z. Zhiyi, P. Weizou, and P. Tiayou Transcrystalline structure of PEEK Eur Polym J 30 2 1994 235 237
154. A. Saleem, L. Frormann, and A. Iqbal High performance thermoplastic composites: Study on the mechanical, thermal, and electrical resistivity properties of carbon fiber-reinforced polyetheretherketone and polyethersulphone Polym Compos 28 6 2007 785 796
155. S.-L. Gao, and J.-K. Kim Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion Composites Part A 31 6 2000 517 530
156. M. Zhang, J. Xu, Z. Zhang, H. Zeng, and X. Xiong Effect of transcrystallinity on tensile behaviour of discontinuous carbon fibre reinforced semicrystalline thermoplastic composites Polymer 37 23 1996 5151 5158
157. T.Q. Li, M.Q. Zhang, and H.M. Zeng Strong interaction at interface of carbon fiber reinforced aromatic semicrystalline thermoplastics Polymer 40 15 1999 4307 4313
158. C.Y. Barlow, J.A. Peacock, and A.H. Windle Relationships between microstructures and fracture energies in carbon fibre/PEEK composites Compos 21 5 1990 383 388
159. R.A. Crick, D.C. Leach, P.J. Meakin, and D.R. Moore Interlaminar fracture morphology of carbon fibre/PEEK composites J Mater Sci 22 6 1987 2094 2104
160. H. Krenchel Fibre Reinforcement 1964 Akademisk Forlag Copenhagen p. 159
161. L. David, and S. Etienne Molecular mobility in para-substituted polyaryls. 1. Sub-Tg relaxation phenomena in poly(aryl-ether-ether-ketone) Macromolecules 25 17 1992 4302 4308
162. P. Patel, T.R. Hull, R.W. McCabe, D. Flath, J. Grasmeder, and M. Percy Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies Polym Deg Stab 95 5 2010 709 718
163. K. Lozano, J. Bonilla-Rios, and E.V. Barrera A study on nanofiber-reinforced thermoplastic composites (II): Investigation of the mixing rheology and conduction properties J Appl Polym Sci 80 8 2001 1162 1172
164. P. Pötschke, T.D. Fornes, and D.R. Paul Rheological behavior of multiwalled carbon nanotube/polycarbonate composites Polymer 43 11 2002 3247 3255
165. T. McNally, P. Pötschke, P. Halley, M. Murphy, D. Martin, and S.E.J. Bell Polyethylene multiwalled carbon nanotube composites Polymer 46 19 2005 8222 8232
166. P. Werner, V. Altstädt, R. Jaskulka, O. Jacobs, J.K.W. Sandler, and M.S.P. Shaffer Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone) Wear 257 9-10 2004 1006 1014
167. H. Voss, and K. Friedrich On the wear behaviour of short-fibre-reinforced PEEK composites Wear 116 1 1987 1 18
168. J. Flöck, K. Friedrich, and Q. Yuan On the friction and wear behaviour of PAN- and pitch-carbon fiber reinforced PEEK composites Wear 225-229 Part 1 1999 304 311
169. A.K. Geim, and K.S. Novoselov The rise of graphene Nat Mater 6 3 2007 183 191
170. K.S. Novoselov, A.K. Geim, S.V. Morozov, D. Jiang, Y. Zhang, and S.V. Dubonos Electric field in atomically thin carbon films Science 306 5696 2004 666 669
171. K.S. Novoselov, Z. Jiang, Y. Zhang, S.V. Morozov, H.L. Stormer, and U. Zeitler Room-temperature quantum hall effect in graphene Science 315 5817 2007 1379
172. A.A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrhan, and F. Miao Superior thermal conductivity of single-layer graphene Nano Lett 8 3 2008 902 907
173. C. Lee, X. Wei, J.W. Kysar, and J. Hone Measurement of the elastic properties and intrinsic strength of monolayer graphene Science 321 5887 2008 385 388
174. P. Sutter Epitaxial graphene: How silicon leaves the scene Nat Mater 8 3 2009 171 172
175. T. Kuilla, S. Bhadra, D. Yao, N.H. Kim, S. Bose, and J.H. Lee Recent advances in graphene based polymer composites Prog Polym Sci 35 11 2010 1350 1375
176. H.J. Salavagione, G. Martinez, and G. Ellis Recent advances in the covalent modification of graphene with polymers Macromol Rapid Commun 32 22 2011 1771 1789
177. H.J. Salavagione, G. Martinez, and G. Ellis Graphene-based polymer nanocomposites S. Mikhailov, Physics and applications of graphene experiments Vol. 1 2010 Intech Rijeka (Croatia) 169 192
178. E.-K. Choi, I.-Y. Jeon, S.-J. Oh, and J.-B. Baek "Direct" grafting of linear macromolecular "wedges" to the edge of pristine graphite to prepare edge-functionalized graphene-based polymer composites J Mater Chem 20 48 2010 10936 10942
179. K. Iakoubovskii, M.V. Baidakova, B.H. Wouters, A. Stesmans, G.J. Adriaenssens, and A.Y. Vul Structure and defects of detonation synthesis nanodiamond Diamond Relat Mater 9 3-6 2000 861 865
180. X. Xu, Z. Yu, Y. Zhu, and B. Wang Influence of surface modification adopting thermal treatments on dispersion of detonation nanodiamond J Solid State Chem 178 3 2005 688 693
181. L. Li, J.L. Davidson, and C.M. Lukehart Surface functionalization of nanodiamond particles via atom transfer radical polymerization Carbon 44 11 2006 2308 2315
182. Q. Zhang, K. Naito, Y. Tanaka, and Y. Kagawa Grafting polyimides from nanodiamonds Macromolecules 41 3 2008 536 538
183. D.H. Wang, L.-S. Tan, H. Huang, L. Dai, and E. Osawa In-situ nanocomposite synthesis: arylcarbonylation and grafting of primary diamond nanoparticles with a poly(ether-ketone) in polyphosphoric acid Macromolecules 42 1 2008 114 124
184. A.G. Rinzler, J. Liu, H. Dai, P. Nikolaev, C.B. Huffman, and F.J. Rodríguez-Macías Large-scale purification of single-wall carbon nanotubes: process, product, and characterization Appl Phys A: Mater Sci Process 67 1 1998 29 37
185. G.T. Pham, Y.B. Park, S. Wang, Z. Liang, B. Wang, and C. Zhang Mechanical and electrical properties of polycarbonate nanotube buckypaper composite sheets Nanotechnology 19 32 2008 325705 325709
186. L. Berhan, Y.B. Yi, A.M. Sastry, E. Munoz, M. Selvidge, and R. Baughman Mechanical properties of nanotube sheets: Alterations in joint morphology and achievable moduli in manufacturable materials J Appl Phys 95 8 2004 4335 4345
187. X. Zhang, T.V. Sreekumar, T. Liu, and S. Kumar Properties and structure of nitric acid oxidized single wall carbon nanotube films J Phys Chem B 108 42 2004 16435 16440
188. P. Gonnet, Z. Liang, E.S. Choi, R.S. Kadambala, C. Zhang, and J.S. Brooks Thermal conductivity of magnetically aligned carbon nanotube buckypapers and nanocomposites Curr Appl Phys 6 1 2006 119 122
189. L. Song, H. Zhang, Z. Zhang, and S. Xie Processing and performance improvements of SWNT paper reinforced PEEK nanocomposites Composites Part A 38 2 2007 388 392
190. A.M. Diez-Pascual, J. Guan, B. Simard, and M.A. Gomez-Fatou Poly(phenylene sulphide) and poly(ether ether ketone) composites reinforced with single-walled carbon nanotube buckypaper. I - Structure, thermal stability and crystallization behaviour Composites Part A 43 7 2012 997 1006
191. A.M. Diez-Pascual, J. Guan, B. Simard, and M.A. Gomez-Fatou Poly(phenylene sulphide) and poly(ether ether ketone) composites reinforced with single-walled carbon nanotube buckypaper. II - Mechanical properties, electrical and thermal conductivity Composites Part A 43 7 2012 1007 1015
192. R. Tenne, L. Margulis, M. Genut, and G. Hodes Polyhedral and cylindrical structures of tungsten disulphide Nature 360 6403 1992 444 446
193. L. Margulis, G. Salitra, R. Tenne, and M. Talianker Nested fullerene-like structures [4] Nature 365 6442 1993 113 114
194. 2 nested inorganic fullerenes and nanotubes Science 267 5195 1995 222 225
195. 2 (M = W, Mo; X = S, Se) probed by high-resolution electron microscopy and scanning tunneling microscopy J Am Chem Soc 116 5 1994 1914 1917
196. R. Tenne Inorganic nanotubes and fullerene-like nanoparticles Nat Nanotechnol 1 2 2006 103 111
197. R. Tenne, and G. Seifert Recent progress in the study of inorganic nanotubes and fullerene-like structures Annu Rev Mater Res 39 2009 387 413
198. M. Remškar Inorganic nanotubes Adv Mater 16 17 2004 1497 1504
199. R. Tenne, and M. Redlich Recent progress in the research of inorganic fullerene-like nanoparticles and inorganic nanotubes Chem Soc Rev 39 5 2010 1423 1434
200. Y. Feldman, A. Zak, R. Popovitz-Biro, and R. Tenne New reactor for production of tungsten disulfide hollow onion-like (inorganic fullerene-like) nanoparticles Solid State Sci 2 6 2000 663 672
201. 2 fullerene-like nanoparticles by gas-phase synthesis J Am Chem Soc 122 45 2000 11108 11116
202. 2 nanotubes phases J Am Chem Soc 122 21 2000 5169 5179
203. 2 nanoparticles with ultra-low friction and wear Nature 407 6801 2000 164 167
204. R. Sen, A. Govindaraj, K. Suenaga, S. Suzuki, H. Kataura, and S. Iijima Encapsulated and hollow closed-cage structures of WS2 and MoS2 prepared by laser ablation at 450-1050°C Chem Phys Lett 340 3-4 2001 242 248
205. 2 nanotubes Adv Mater 13 4 2001 283 286
206. 2 Chem Mater 15 23 2003 4498 4502
207. Y. Mastai, M. Homyonfer, A. Gedanken, and G. Hodes Room temperature sonoelectrochemical synthesis of molybdenum sulfide fullerene-like nanoparticles Adv Mater 11 12 1999 1010 1013
208. 2 J Am Chem Soc 120 4 1998 734 742
209. H. Wu, R. Yang, B. Song, Q. Han, J. Li, and Y. Zhang Biocompatible inorganic fullerene-like molybdenum disulfide nanoparticles produced by pulsed laser ablation in water ACS Nano 5 2 2011 1276 1281
210. NanoMaterials Ltd. NanoLub® RL, Lubricant Nano Powder product data sheet. < http://www.apnano.com/ >.
211. 2 as potential solid-state lubricants Nature 387 6635 1997 791 793
212. 2 nanotubes and the application as the catalyst of methanation Chem Comm 16 2002 1722 1723
213. 2 nanotubes [9] J Am Chem Soc 123 47 2001 11813 11814
214. M. Nath, and C.N.R. Rao Nanotubes of group 4 metal disulfides Angew Chem Int Ed 41 18 2002 3451 3454
215. 2 nanoparticles with fullerene-like structures under shock wave pressure J Am Chem Soc 127 46 2005 16263 16272
216. 2 nanoparticles for orthodontic wires and other possible medical applications Tribol Lett 21 2 2006 135 139
217. 2 impregnated in electroless nickel-phosphorous film Dent Mater 24 12 2008 1640 1646
218. G.R. Samorodnitzky-Naveh, M. Redlich, L. Rapoport, Y. Feldman, and R. Tenne Inorganic fullerene-like tungsten disulfide nanocoating for friction reduction of nickel-titanium alloys Nanomedicine 4 8 2009 943 950
219. Moore GE. Acute inhalation toxicity study in rats - limit test. In: Product safety laboratories, study number 18503. Dayton, New Yersey (USA); 2006.
220. L. Rapoport, O. Nepomnyashchy, A. Verdyan, R. Popovitz-Biro, Y. Volovik, and B. Ittah Polymer nanocomposites with fullerene-like solid lubricant Adv Eng Mater 6 1 2004 44 48
221. 2 nanoparticles on the thermal behavior of isotactic polypropylene J Polym Sci, Part B: Polym Phys 45 16 2007 2309 2321
222. 2 nanoparticles Thermochim Acta 472 1-2 2008 11 16
223. 2 nanocomposites J Phys Chem B 112 47 2008 14819 14828
224. 2 nanoparticles in polyphenylene sulfide nanocomposites: Isokinetic and isoconversional study of dynamic crystallization kinetics J Phys Chem B 113 20 2009 7107 7115
225. 2 to produce new high-performance polyphenylene sulfide nanocomposites: Role of the nanoparticle concentration J Phys Chem B 113 30 2009 10104 10111
226. 2 nanocomposites: Complex isothermal crystallization kinetics and melting behaviour Mater Chem Phys 128 1-2 2011 265 273
227. 2 nanocomposites for critical applications Mater Chem Phys 129 1-2 2011 641 648
228. 2 nanoparticles for critical applications J Phys Chem B 114 35 2010 11444 11453
229. C. Sanchez, B. Julián, P. Belleville, and M. Popall Applications of hybrid organic-inorganic nanocomposites J Mater Chem 15 35-36 2005 3559 3592
230. X. Hou, C.X. Shan, and K.L. Choy Microstructures and tribological properties of PEEK-based nanocomposite coatings incorporating inorganic fullerene-like nanoparticles Surf Coat Technol 202 11 2008 2287 2291
231. 2 nanoparticles and poly(ether ether ketone) (PEEK) J Mater Chem 21 20 2011 7425 7433
232. 3 particulates Mater Chem Phys 90 1 2005 185 195
233. 2 hybrid nanocomposites: Experimental measurements and theoretical predictions Mater Chem Phys 130 1-2 2011 126 133
234. 2 composites compounded using a ball milling technique Compos Sci Technol 68 15-16 2008 3073 3080
235. P. Sheng Fluctuation-induced tunneling conduction in disordered materials Phys Rev B 21 6 1980 2180
236. B.H. Stuart Tribological studies of poly(ether ether ketone) blends Tribol Int 31 11 1998 647 651
237. R.K. Goyal, Y.S. Negi, and A.N. Tiwari Preparation of high performance composites based on aluminum nitride/poly(ether-ether-ketone) and their properties Eur Polym J 41 9 2005 2034 2044
238. R.K. Goyal, Y.S. Negi, and A.N. Tiwari High performance polymer composites on PEEK reinforced with aluminum oxide J Appl Polym Sci 100 6 2006 4623 4631
239. 3 Eur Polym J 40 10 2004 2357 2363
240. M.S. Abu Bakar, P. Cheang, and K.A. Khor Thermal processing of hydroxyapatite reinforced polyetheretherketone composites J Mater Process Technol 89-90 1999 462 466
241. S.M. Kurtz, and J.N. Devine PEEK biomaterials in trauma, orthopedic, and spinal implants Biomaterials 28 32 2007 4845 4869
242. K. Fujihara, Z.-M. Huang, S. Ramakrishna, K. Satknanantham, and H. Hamada Performance study of braided carbon/PEEK composite compression bone plates Biomaterials 24 15 2003 2661 2667
243. Y.-C. Chou, D.-C. Chen, W.A. Hsieh, W.-F. Chen, P.-S. Yen, and T. Harnod Efficacy of anterior cervical fusion: Comparison of titanium cages, polyetheretherketone (PEEK) cages and autogenous bone grafts J Clin Neurosci 15 11 2008 1240 1245
244. K.B. Sagomonyants, M.L. Jarman-Smith, J.N. Devine, M.S. Aronow, and G.A. Gronowicz The in vitro response of human osteoblasts to polyetheretherketone (PEEK) substrates compared to commercially pure titanium Biomaterials 29 11 2008 1563 1572
245. M.S. Abu Bakar, M.H.W. Cheng, S.M. Tang, S.C. Yu, K. Liao, and C.T. Tan Tensile properties, tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants Biomaterials 24 13 2003 2245 2250
246. S. Yu, K.P. Hariram, R. Kumar, P. Cheang, and K.K. Aik In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites Biomaterials 26 15 2005 2343 2352
247. M.S. Abu Bakar, P. Cheang, and K.A. Khor Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites Compos Sci Technol 63 3-4 2003 421 425
248. M.Z. Rong, M.Q. Zhang, Y.X. Zheng, H.M. Zeng, R. Walter, and K. Friedrich Structure-property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites Polymer 42 1 2001 167 183
249. M. Sumita, T. Shizuma, K. Miyasaka, and K. Ishikawa Effect of reducible properties of temperature, rate of strain and filler content on the tensile yield stress of nylon 6 composites filled with ultrafine particles J Macromol Sci B22 4 1983 601 618
250. 4 filled PEEK Wear 196 1-2 1996 82 86
251. 2 on the tribological behaviour of PEEK Wear 198 1-2 1996 216 219
252. Q.-H. Wang, J. Xu, W. Shen, and Q. Xue The effect of nanometer SiC filler on the tribological behavior of PEEK Wear 209 1-2 1997 316 321
253. 2 nanocomposites prepared by cryomilling J Polym Sci, Part B: Polym Phys 44 8 2006 1161 1167
254. C. Suryanarayana Mechanical alloying and milling Prog Mater Sci 46 1-2 2001 1 184
255. 4 nanocomposites J Appl Polym Sci 119 1 2011 311 318
256. 2 nanocomposites containing untreated and surface-treated nanoparticles J Appl Polym Sci 100 4 2006 2684 2696
257. L. Wang, L. Weng, and S. Song Hydrothermal synthesis of hydroxyapatite nanoparticles with various counterions as templates J Ceram Soc Jpn 118 1384 2010 1195 1198
258. L. Wang, L. Weng, S. Song, Z. Zhang, S. Tian, and R. Ma Characterization of polyetheretherketone-hydroxyapatite nanocomposite materials Mater Sci Eng A 528 10-11 2011 3689 3696
259. 3/poly(ether ether ketone) nanocomposites for electronics applications Compos Sci Technol 67 9 2007 1802 1812
260. M.C. Kuo, J.C. Huang, and M. Chen Non-isothermal crystallization kinetic behavior of alumina nanoparticle filled poly(ether ether ketone) Mater Chem Phys 99 2-3 2006 258 268
261. M.C. Kuo, J.S. Kuo, M.H. Yang, and J.C. Huang On the crystallization behavior of the nano-silica filled PEEK composites Mater Chem Phys 123 2-3 2010 471 480
262. J. Jordan, K.I. Jacob, R. Tannenbaum, M.A. Sharaf, and I. Jasiuk Experimental trends in polymer nanocomposites - a review Mater Sci Eng A 393 1-2 2005 1 11
263. H. Zou, S. Wu, and J. Shen Polymer/Silica Nanocomposites: Preparation, characterization, properties, and applications Chem Rev 108 9 2008 3893 3957
264. F. Hussain, M. Hojjati, M. Okamoto, and R.E. Gorga Polymer-matrix nanocomposites, processing, manufacturing, and application: An overview J Compos Mater 40 17 2006 1511 1575
265. Y.H. Lai, M.C. Kuo, J.C. Huang, and M. Chen On the PEEK composites reinforced by surface-modified nano-silica Mater Sci Eng A 458 1-2 2007 158 169
266. Y. Sun, Z. Zhang, and C.P. Wong Study on mono-dispersed nano-size silica by surface modification for underfill applications J Colloid Interf Sci 292 2 2005 436 444
267. M. Hedayati, M. Salehi, R. Bagheri, M. Panjepour, and A. Maghzian Ball milling preparation and characterization of poly (ether ether ketone)/surface modified silica nanocomposite Powder Technol 207 1-3 2011 296 303
268. 4 nanocomposites: New electronic substrate materials Polym Eng Sci 51 3 2011 509 517
269. S.H. Ahn, S.H. Kim, and S.G. Lee Surface-modified silica nanoparticle-reinforced poly(ethylene 2,6-naphthalate) J Appl Polym Sci 94 2 2004 812 818
270. B.J. Meenan, C. McClorey, and M. Akay Thermal analysis studies of poly(etheretherketone)/hydroxyapatite biocomposite mixtures J Mater Sci Mater Med 11 8 2000 481 489
271. L.H. Sperling Introduction to physical polymer science 1993 John Wiley & Son New York
272. T. Liu, Z. Mo, S. Wang, and H. Zhang Nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone) Polym Eng Sci 37 3 1997 568 575
273. C.P. Wong, and R.S. Bollampally Thermal conductivity, elastic modulus, and coefficient of thermal expansion of polymer composites filled with ceramic particles for electronic packaging J Appl Polym Sci 74 14 1999 3396 3403
274. R.K. Goyal, A.N. Tiwari, U.P. Mulik, and Y.S. Negi Thermal expansion behaviour of high performance PEEK matrix composites J Phys D: Appl Phys 41 8 2008 085403 85407
275. W.D.J. Callister Material science and engineering, an introduction 2003 John Wiley & Sons New York
276. R.K. Goyal, A.N. Tiwari, and Y.S. Negi High performance nanocomposites for tribological applications: Preparation and characterization Mater Sci Eng A 486 1-2 2008 602 610
277. 3 composites J Appl Polym Sci 110 6 2008 3379 3387
278. R.K. Goyal, A.N. Tiwari, and Y.S. Negi Microhardness of PEEK/ceramic micro- and nanocomposites: Correlation with Halpin-Tsai model Mater Sci Eng A 491 1-2 2008 230 236
279. C.L. Wu, M.Q. Zhang, M.Z. Rong, and K. Friedrich Tensile performance improvement of low nanoparticles filled-polypropylene composites Compos Sci Technol 62 10-11 2002 1327 1340
280. H. Zhang, Z. Zhang, J.-L. Yang, and K. Friedrich Temperature dependence of crack initiation fracture toughness of various nanoparticles filled polyamide 66 Polymer 47 2 2006 679 689
281. M.-H.R. Jen, Y.-C. Tseng, and C.-H. Wu Manufacturing and mechanical response of nanocomposite laminates Compos Sci Technol 65 5 2005 775 779
282. 2 filled polyetheretherketone Tribol Int 30 3 1997 193 197
283. G. Tsagaropoulos, and A. Eisenberg Direct observation of two glass transitions in silica-filled polymers. Implications to the morphology of random ionomers Macromolecules 28 1 1995 396 398
284. G. Tsagaropoulos, and A. Eisenberg Dynamic mechanical study of the factors affecting the two glass transition behavior of filled polymers. similarities and differences with random ionomers Macromolecules 28 18 1995 6067 6077
285. 3 nanoparticles reinforced polyetheretherketone Mater Sci Eng A 492 1-2 2008 383 391
286. A. Ravaglioli, and A. Krajewski Bioceramics: materials, properties, applications 1992 Chapman & Hall New York
287. L. Wang, L. Weng, S. Song, and Q. Sun Mechanical properties and microstructure of polyetheretherketone-hydroxyapatite nanocomposite materials Mater Lett 64 20 2010 2201 2204
288. S.W. Shang, J.W. Williams, and K.J.M. Söderholm How the work of adhesion affects the mechanical properties of silica-filled polymer composites J Mater Sci 29 9 1994 2406 2416
289. X.L. Ji, J.K. Jing, W. Jiang, and B.Z. Jiang Tensile modulus of polymer nanocomposites Polym Eng Sci 42 5 2002 983 993
290. S.M. Tang, P. Cheang, M.S. AbuBakar, K.A. Khor, and K. Liao Tension-tension fatigue behavior of hydroxyapatite reinforced polyetheretherketone composites Int J Fatigue 26 1 2004 49 57
291. K. Friedrich, Z. Zhang, and A.K. Schlarb Effects of various fillers on the sliding wear of polymer composites Compos Sci Technol 65 15-16 2005 2329 2343
292. S. Bahadur, and D. Gong The role of copper compounds as fillers in the transfer and wear behavior of polyetheretherketone Wear 154 1 1992 151 165
293. C.J. Schwartz, and S. Bahadur Studies on the tribological behavior and transfer film-counterface bond strength for polyphenylene sulfide filled with nanoscale alumina particles Wear 237 2 2000 261 273
294. L. Yu, S. Yang, W. Liu, Q. Xue, and S. Bahadur Action of transfer film in improving friction and wear behaviors of iron- and copper-filled poly(ether ether ketone) composites J Appl Polym Sci 76 2 2000 179 184
295. Nanocyl, Product data sheet. < http://www.nanocyl.com >.
296. Solvay Advanced Polymers, LLC. < http://www.solvayplastics.com/ >.
297. J. Denault, and M. Dumouchel Consolidation process of PEEK/Carbon composite for aerospace applications Adv Perform Mater 5 1 1998 83 96
298. Sedlak P, Enoki M, Ogasawara T, Sikula J. Electromagnetic and acoustic emission in PEEK/Carbon nanotube composites. In: 29th European conference on acoustic emission testing, Vienna (Austria); 2010.
299. Hull TR. Flammability properties of PEEK and carbon nanotube composites. In: 13th European meeting on fire retardant polymers, Alessandria (Italy); 2011.
300. K.H. Tan, C.K. Chua, K.F. Leong, C.M. Cheah, and P. Cheang Abu Bakar MS, et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends Biomaterials 24 18 2003 3115 3123
301. A. Godara, D. Raabe, and S. Green The influence of sterilization processes on the micromechanical properties of carbon fiber-reinforced PEEK composites for bone implant applications Acta Biomater 3 2 2007 209 220
302. S.D. Cook, and A.M. Rust-Dawicki Preliminary evaluation of titanium coated PEEK dental implants J Oral Implantol 21 3 1995 176 181
303. A. Wang, R. Lin, C. Stark, and J.H. Dumbleton Suitability and limitations of carbon fiber reinforced PEEK composites as bearing surfaces for total joint replacements Wear 225-229 1999 724 727