Connecting physical properties of spin-casting solvents with morphology, nanoscale charge transport, and device performance of poly(3-hexylthiophene): Phenyl-C61-butyric acid methyl ester bulk heterojunction solar cells

Journal of Photonics for Energy

Volumn 1, Issue 1, 2011, Pages

  Dutta, Pavel ^a   Xie, Yu ^a   Kumar, Mukesh ^a   Rathi, Monika ^b   Ahrenkiel, Phil ^b   Galipeau, David ^a   Qiao, Qiquan ^a   Bommisetty, Venkat ^a  

^a South Dakota State University   (United States)

^b United States   (United States)

Author keywords

Blend morphology; Bulk heterojunction; Hole mobility; Nanoscale charge transport; Organic solar cell; Scanning probe microscopy

Indexed keywords

AROMATIC SOLVENT; BLEND MORPHOLOGY; BULK HETEROJUNCTION; BULK HETEROJUNCTION SOLAR CELLS; DEPENDENT PROCESS; DEVICE PERFORMANCE; DRYING RATES; EXCITON GENERATION; EXTERNAL QUANTUM EFFICIENCY; FILM MORPHOLOGY; HOLE TRANSPORTS; ISOLATED CLUSTER; LENGTH SCALE; LIMITED DEVICES; METHYL ESTERS; NANO SCALE; ORGANIC SOLAR CELL; ORTHO-DICHLOROBENZENE; POLY (3-HEXYLTHIOPHENE); POWER CONVERSION EFFICIENCIES; SPIN CAST;

BUTYRIC ACID; CONVERSION EFFICIENCY; ESTERIFICATION; ESTERS; EXCITONS; HETEROJUNCTIONS; HOLE MOBILITY; NANOTECHNOLOGY; ORGANIC SOLVENTS; PHASE SEPARATION; PHYSICAL PROPERTIES; SCANNING PROBE MICROSCOPY; SOLAR CELLS;

MORPHOLOGY;

EID: 84858646937     PISSN: None     EISSN: 19477988     Source Type: Journal    
DOI: 10.1117/1.3662467     Document Type: Article

References (59)

1. G. Li, V. Shrotriya, J. Huang, Y. Yao, T. Moriarty, K. Emery, and Y. Yang, "High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends", Nature Mater. 4, 864-868 (2005).
2. C. J. Brabec, N. S. Sariciftci, and J. C. Hummelen, "Plastic solar cells", Adv. Funct. Mater. 11, 15-26 (2001). (Pubitemid 33046405)
3. G. Yu, J. Gao, J. C. Hummelen, F. Wudl, and A. J. Heeger, "Polymer photovoltaic cells: Enhanced efficiencies via a network of internal donor-acceptor heterojunctions", Science 270, 1789-1791 (1995). (Pubitemid 126635480)
4. G. Yu and A. J. Heeger, "Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions", J. Appl. Phys. 78, 4510-4515 (1995).
5. J. J. M. Halls, C. A. Walsh, N. C. Greenham, E. A. Marseglia, R. H. Friend, S. C. Moratti, and A. B. Holmes, "Efficient photodiodes from interpenetrating polymer networks", Nature 376, 498-500 (1995).
6. S. E. Shaheen, C. J. Brabec, N. S. Sariciftc, F. Padinger, T. Fromherz, and J. C. Hummelen, "2.5% efficient organic plastic solar cells", Appl. Phys. Lett. 78, 841-843 (2001). (Pubitemid 33630368)
7. M. Siddiki, J. Li, D. Galipeau, and Q. Qiao, "A review on polymer multijunction solar cell", Energy Environ. Sci. 3, 867-883 (2010).
8. S. N. Dayal, D. C. Kopidakis, D. S. G. Olson, and G. Rumbles, "Photovoltaic devices with a low band gap polymer and CdSe nanostructures exceeding 3% efficiency", Nano Lett. 10, 239-242 (2010).
9. 2 solar cells", Appl. Phys. Lett. 86, 153501 (2005).
10. W. L. Ma, C. Y. Yang, X. Gong, K. Lee, and A. J. Heeger, "Thermal stable, efficient polymer solar cells with nanoscale controlled of the interpenetrating network morphology", Adv. Funct. Mater. 15, 1617-1622 (2005). (Pubitemid 41454589)
11. J. Y. Kim, K. Lee, N. E. Coates, D. Moses, T. Q. Nguyen, M. Dante, and A. J. Heeger, "Efficient tandem polymer solar cells fabricated by all-solution processing", Science 317, 222-225 (2007). (Pubitemid 47076192)
12. P. Peumans, A. Yakimov, and S. R. Forrest, "Small molecular weight organic thin-film photodetectors and solar cells", J. Appl. Phys. 93, 3693-3723 (2003).
13. D. E. Markov, E. Amsterdam, P. W. M. Blom, A. B. Sieval, and J. C. Hummelen, "Accurate measurement of the exciton diffusion length in a conjugated polymer using a heterostructure with a side-chain cross-linked fullerene layer", J. Phys. Chem. A 109, 5266-5274 (2005).
14. Y. Terao, H. Sasabe, and C. Adachi, "Correlation of hole mobility, exciton diffusion length, and solar cell characteristics in phthalocyanine/ fullerene organic solar cells", Appl. Phys. Lett. 90, 103515 (2007).
15. H. Xin, O. G. Reid, G. Ren, F. S. Kim, D. S. Ginger, and S. A. Jenekhe, "Polymer nanowire/fullerene bulk heterojunction solar cells: How nanostructures determines photovoltaic properties", ACS Nano 4, 1861-1872 (2010).
16. C. Deibel and V. Dyakonov, "Polymer-fullerene bulk heterojunction solar cells", Rep. Prog. Phys. 73, 096401 (2010).
17. Y. Xie, Y. Li, L. Xiao, Q. Qiao, R. Dhakal, Z. Zhang, Q. Gong, D. Galipeau, and X. Yan, "Femtosecond time-resolved fluorescence study of P3HT/PCBM blend films", J. Phys. Chem. C 114, 14590-14600 (2010).
18. V. D. Mihailetchi, H. Xie, B. D. Boer, L. M. Popescu, J. C. Hummelen, P. W. M. Blom, and L. J. A. Koster, "Origin of the enhanced performance in poly (3-hexylthiophene): 6, 6-phenyl C61-butyric acid methyl ester solar cells upon slow drying of the active layer", Appl. Phys. Lett. 89, 012107 (2006).
19. D. Chirvase, J. Parisi, J. C. Hummelen, and V. Dyakonov, "Influence of nanomorphology on the photovoltaic action of polymer-fullerene composites", Nanotechnology 15, 1317-1323 (2004).
20. H. Hoppe and N. S. Sariciftci, "Morphology of polymer/fullerene bulk heterojunction solar cells", J. Mater. Chem. 16, 45-61 (2006). (Pubitemid 43324484)
21. Y. Zhao, Z. Xie, Y. Qu, Y. Geng, and L. Wang, "Solvent-vapor treatment induced performance enhancement of poly (3-hexylthiophene): methanofullerene bulk-heterojunction photovoltaic cells", Appl. Phys. Lett. 90, 043504 (2007).
22. X. Yang, J. Loos, S. C. Veenstra, W. J. H. Verhees, M. M. Wienk, J. M. Kroon, M. A. J. Michels, and R. A. J. Janssen, "Nanoscale morphology of high-performance polymer solar cell", Nano Lett. 5, 579-583 (2005). (Pubitemid 40609723)
23. M. N. Yusli, T. W. Yun, and K. Sulaiman, "Solvent effect on the thin film formation of polymeric solar cells", Mater. Lett. 63, 2691-2694 (2009).
24. K. Kawano, J. Sakai, M. Yahiroa, and C. Adachi, "Effect of solvent on fabrication of active layers in organic solar cells based on poly (3-hexylthiophene) and fullerene derivatives", Sol. Energy Mater. Sol. Cells 93, 514-518 (2009).
25. D. M. DeLongchamp, B. M. Vogel, Y. Jung, M. C. Gurau, C. A. Richter, O. A. Kirillov, J. Obrzut, D. A. Fischer, S. Sambasivan, L. J. Richter, and E. K. Lin, "Variations in semiconducting polymer microstructure and holemobility with spin-coating", Chem. Mater. 17, 5610-5612 (2005). (Pubitemid 41692212)
26. Y. Kim, S. A. Choulis, J. Nelson, D. D. C. Bradley, S. Cook, and J. R. Durrant, "Device annealing effect in organic solar cells with blends of regioregular poly (3-hexylthiophene) and soluble fullerene", Appl. Phys. Lett. 86, 063502 (2005).
27. 3/poly (9, 9-dioctylfluorene-co-N-[4-(3-methylpropyl)]-diphenylamine) double-interlayer effect on polymer solar cells", Appl. Phys. Lett. 96, 063303 (2010).
28. C. M. Amb, S. Chen, K. R. Graham, J. Subbiah, C. E. Small, F. So, and J. R. Reynolds, "Dithienogermole as a fused electron donor in bulk heterojunction, solar cells", J. Am. Chem. Soc. 133, 10062-10065 (2011).
29. J. Subbiah, K. R. Choudhury, S. Ellinger, J. R. Reynolds, and F. So, "Color tunable p-conjugated polymers for solar-cell applications: Engineering of bandgap, interface, and charge transport properties", IEEE J. Sel. Top. Quantum Electron. 16, 1792-1800 (2010).
30. Y. Xie, P. Dutta, D. Cengher, V. Bommisetty, J. Li, D. Galipeau, and Q. Qiao, "Solvent effect on the morphology of P3HT/PCBM films", Proc. SPIE 7416, 74161Q (2009).
31. A. Douhéret, S. Swinnen, I. Bertho, J. D'Haen Haeldermans, M. D'Olieslaeger, D. Vanderzande, and J. V. Manca, "High-resolution morphological and electrical characterisation of organic bulk heterojunction solar cells by scanning probe microscopy", Prog. Photovoltaics 15, 713-726 (2007). (Pubitemid 350284433)
32. K. Maturova, R. A. J. Janssen, and M. Kemerink, "Connecting scanning tunneling spectroscopy to device performance for polymer: fullerene organic solar cells", ACS Nano 4, 1385-1392 (2010).
33. L. S. C. Pingree, O. G. Reid, and D. S. Ginger, "Electrical scanning probe microscopy on active organic electronic devices", Adv. Mater. 21, 19-28 (2009).
34. H. Hoppe, T. Glatzel, M. Niggemann, A. Hinsch, M. Lux-Steiner, and N. S. Sariciftci, "Kelvin probe forcemicroscopy study on conjugated polymer/fullerene bulk heterojunction organic solar cells", Nano Lett. 5, 269-274 (2005). (Pubitemid 40308283)
35. K. Maturová, M. Kemerink, M. M. Wienk, S. H. Charrier, and R. A. J. Janssen, "Scanning Kelvin probe microscopy on bulk hetrojunction polymer blend", Adv. Funct. Mater. 19, 1379-1386 (2009).
36. M. Dante, J. Peet, and T. Q. Nguyen, "Nanoscale charge transport and internal structures of bulk hetrojunction conjugated polymer/fullerene solar cells by scanning probe microscopy", J. Phys. Chem. C 112, 7241-7249 (2008). (Pubitemid 351704655)
37. X. Wang, D. Zhang, K. Braun, H. Egelhaaf, C. J. Brabec, and A. J. Meixner, "Highresolution spectroscopic mapping of the chemical contrast from nanometer domains in P3HT: PCBM organic blend films for solar-cell applications", Adv. Funct. Mater. 20, 492-499 (2010).
38. C. R. McNeill, H. Frohne, J. L. Holdsworth, J. E. Furst, B. V. King, and P. C. Dastoor, "Direct photocurrent mapping of organic solar cells using a near-field scanning optical microscope", Nano Lett. 4, 219-223 (2004). (Pubitemid 38292891)
39. L. F. Drummy, R. J. Davis, D. L. Moore, M. Durstock, R. A. Vaia, and J. W. P. Hsu, "Molecular-scale and nanoscalemorphology of P3HT: PCBM bulk heterojunctions: Energyfiltered TEM and low-dose HREM", Chem. Mater. 23, 907-912 (2011).
40. J. P. Cleveland, B. Anczykowski, A. E. Schmid, and V. B. Elings, "Energy dissipation in tapping-mode atomic force microscopy", Appl. Phys. Lett. 72, 2613-2615 (1998). (Pubitemid 128671593)
41. E. Thormann, T. Pettersson, J. Kettle, and P. M. Claesson, "Probing material properties of polymeric surface layers with tapping mode AFM: Which cantilever spring constant, tapping amplitude and amplitude setpoint gives good image contrast and minimal surface damage?", Ultramicroscopy 110, 313-319 (2010).
42. Y. Yao, J. Hou, Z. Xu, G. Li, and Y. Yang, "Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells", Adv. Mater. 18, 1783-1789 (2008).
43. T. J. Savenije, J. E. Kroeze, X. Yang, and J. Loos, "The effect of thermal treatment on the morphology and charge carrier dynamics in polythiophene-fullerene bulk heterojunction", Adv. Funct. Mater. 15, 1260-1266 (2005). (Pubitemid 41119969)
44. X. Yang and J. Loos, "Toward high-performance polymer solar cells: The importance of morphology control", Macromolecules 40, 1353-1362 (2007). (Pubitemid 46423651)
45. L. M. Chen, Z. Hong, G. Li, and Y. Yang, "Multi-source/component spray coating for polymer solar cells", Adv. Mater. 21, 1434-1449 (2009).
46. Y. Yao, C. Shi, G. Li, V. Shrotriya, Q. Pei, and Y. Yang, "Modeling optical effects and thickness dependent current in polymer bulk-heterojunction solar cells", Appl. Phys. Lett. 89, 153507 (2006).
47. 60 in a variety of solvents", J. Phys. Chem. 97, 3379-3383 (1993).
48. K. E. Strawhecker and S. K. Kumar, "The critical role of solvent evaporation on the roughness of spin-cast polymer films", Macromolecules 34, 4669-4672 (2001). (Pubitemid 34217321)
49. G. Li, V. Shrotriya, Y. Yao, and Y. Yang, "Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly (3-hexylthiophene)", J. Appl. Phys. 98, 043704 (2005).
50. A. C. Arias, "Vertically segregated polymer blends: Their use in organic electronics", J. Macromol. Sci., Polym. Rev. 46, 103-125 (2006).
51. L. S. C. Pingree, O. G. Reid, and D. S. Ginger, "Imaging the evolution of nanoscale photocurrent collection and transport networks during annealing of polythiophene/fullerene solar cells", Nano Lett. 9, 2946-2952 (2009).
52. O. Douhéreta, L. Lutsen, A. Swinnen, M. Breselge, K. Vandewal, L. Goris, and J. Manca, "Nanoscale electrical characterization of organic photovoltaic blends by conductive atomic force microscopy", Appl. Phys. Lett. 89, 032107 (2006).
53. R. A. Marsh, C. R. McNeill, A. Abrusci, A. R. Campbell, and R. H. Friend, "A unified description of current-voltage characteristics in organic and hybrid photovoltaics under low light intensity", Nano Lett. 8, 1393-1398 (2008).
54. O. G. Reid, K. Munechika, and D. S. Ginger, "Space charge limited current measurements on conjugated polymer films using conductive atomic force microscopy", Nano Lett. 8, 1602-1609 (2008).
55. J. Nelson, J. Kirkpatrick, and P. Ravirajan, "Factors limiting the efficiency of molecular photovoltaic devices", Phys. Rev. B 69, 035337 (2004).
56. A. Kumar, S. Sista, and Y. Yand, "Dipole induced S-shaped I-V curves in polymer solar cells", J. Appl. Phys. 105, 094512 (2009).
57. A. Wagenpfahl, D. Rauh, M. Binder, C. Deibel, and V. Dyakonov, "S-shaped currentvoltage characteristics of organic solar cell", Phys. Rev. B 82, 115306 (2010).
58. A. Kumar, G. Li, Z. Hong, and Y. Yang, "High efficiency polymer solar cells with vertically modulated nanoscale morphology", Nanotechnology 20, 165202 (2009).
59. C. R. McNeill, S. Westenhoff, C. Groves, R. H. Friend, and N. C. Greenham, "Influence of nanoscale phase separation on the charge generation dynamics and photovoltaic performance of conjugated polymer blends: Balancing charge generation and separation", J. Phys. Chem. C 111, 19153-19160 (2007).