Indirect measurement of volumetric accuracy for three-axis and five-axis machine tools: A review

International Journal of Automation Technology

Volumn 6, Issue 2, 2012, Pages 110-124

  Ibaraki, Soichi ^a   Knapp, Wolfgang ^b  

^a KYOTO UNIVERSITY   (Japan)

^b NONE   (Switzerland)

Author keywords

Indirect measurement; Kinematic model; Machine tools; Volumetric accuracy

Indexed keywords

ERROR COMPENSATION; KINEMATICS; VOLUMETRIC ANALYSIS;

FIVE-AXIS MACHINE TOOLS; INDIRECT MEASUREMENTS; KINEMATIC MODEL; MACHINE TOOL KINEMATICS; NUMERICAL COMPENSATION; POSITION AND ORIENTATIONS; VOLUMETRIC ACCURACY; VOLUMETRIC ERRORS;

MACHINE TOOLS;

EID: 84858022453     PISSN: 18817629     EISSN: 18838022     Source Type: Journal    
DOI: 10.20965/ijat.2012.p0110     Document Type: Review

References (173)

1. ISO/PDTR 16907, "Numerical compensation of geometric errors of machine tools," 2011.
2. ISO/FDIS 230-1, "Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions," 2011.
3. S. Sartori and G. Zhang, "Geometric Error Measurement and Compensation of Machines," CIRP Annals - Manufacturing Technology, Vol.44, No.2, pp. 599-609, 1995.
4. S. C. Veldhuis and M. A. Elbestawi, "A Strategy for the Compensation of Errors in Five-Axis Machining," CIRP Annals - Manufacturing Technology, Vol.44, No.1, pp. 373-377, 1995.
5. M. Weck, P. McKeown, R. Bonse, and U. Herbst, "Reduction and Compensation of Thermal Errors in Machine Tools," CIRP Annals - Manufacturing Technology, Vol.44, No.2, pp. 589-598, 1995.
6. H. Spaan, "Software error compensation of machine tools," Ph.D. dissertation at Eindhoven University of Technology, 1995.
7. R. Ramesh, M. A. Mannan, and A. N. Poo, "Error compensation in machine tools - a review: Part I: geometric, cutting-force induced and fixture-dependent errors," Int. J. of Machine Tools and Manufacture, Vol.40, Issue 9, pp. 1235-1256, 2000.
8. S. Fletcher, S. R. Postlethwaite, ansd D. G. Ford, "Volumetric compensation through the machine controller," Laser Metrology and Machine Performance V, pp. 321-330, 2001.
9. E. L. J. Bohez, "Compensating for systematic error in 5-axis NC machining," Computer Aided Design, Vol.34, Issue 5, pp. 391-403, 2002.
10. H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine, "Geometric error measurement and compensation of machines -An update," CIRP Annals - Manufacturing Technology, Vol.57, No.2, pp. 560-575, 2008.
11. A.W. Khan and W. Chen, "A methodology for systematic geometric error compensation in five-axis machine tools," Int. J. of Advanced Manufacturing Technology, Vol.53, No.5-8, pp. 615-628, 2010.
12. ISO 230-2, "Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes," 2006.
13. ISO 230-4, "Test code for machine tools - Part 4: Circular tests for numerically controlled machine tools," 2005.
14. ISO 230-7, "Test code for machine tools - Part 7: Geometric accuracy of axes of rotation," 2006.
15. S. H. H. Zargarbashi and J. R. R. Mayer, "Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor," Int. J. of Machine Tools and Manufacture, Vol.49, Issue 10, pp. 759-766, 2009
16. M. Tsutsumi and A. Saito, "Identification and compensation of systematic deviations particular to 5-axis machining centers," Int. J. of Machine Tools and Manufacture, Vol.43, Issue 8, pp. 771-780, 2003.
17. Y. Abbaszadeh-Mir, J. R. R. Mayer, G. Cloutier, and C. Fortin, "Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar," Int. J. of Production Research, Vol.40, Issue 18, pp. 4781-4797, 2002.
18. M. Tsutsumi and A. Saito, "Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements," Int. J. of Machine Tools and Manufacture, Vol.44, Issue 12/13, pp. 1333-1342, 2004.
19. I. Inasaki, K. Kishinami, S. Sakamoto, N. Sugimura, Y. Takeuchi, and F. Tanaka, "Shaper generation theory of machine tools - its basis and applications," Yokendo, Tokyo, 1997. (in Japanese)
20. R. J. Hocken, J. A. Simpson, B. Borchardt, J. Lazar, C. Reeve, and P. Stein, "Three dimensional metrology," Annals of CIRP, Vol.26, No.1, pp. 403-408, 1977.
21. M. Donmez, D. Blomquist, R. Hocken, C. Liu, and M. Barash, "A general methodology for machine tool accuracy enhancement by error compensation," Precision Engineering, Vol.8, No.4, pp. 187-196, 1986.
22. A. Kurtoglu and G. Sohlenius, The Accuracy Improvement of Machine Tools, CIRP Annals - Manufacturing Technology, Vol.39, No.1, pp. 417-419, 1990.
23. J. Soons, F. Theuws, and P. Schellekens, "Modeling the errors of multi-axis machines: a general methodology," Precision Engineering, Vol.14, No.1, pp. 5-19, 1992.
24. V. S. B. Kiridena and P. M. Ferreira, "Kinematic modeling of quasistatic errors of three-axis machining centers," Int. J. of Machine Tools and Manufacture, Vol.34, Issue 1, pp. 85-100, 1994.
25. J. A. Soons, "Analysis of the step-diagonal test," Laser Metrology and Machine Performance 8, pp. 126-137, 2005.
26. K. F. Eman, B. T. Wu, and M. F. DeVries, "A Generalized Geometric Error Model for Multi-Axis Machines," CIRP Annals - Manufacturing Technology, Vol.36, No.1, pp. 253-256, 1987.
27. S. Ibaraki, C. Oyama, and H. Otsubo, "Construction of an error map of rotary axes on a five-axis machining center by static R-test," Int. J. of Machine Tools and Manufacture, Vol.51, Issue 3, pp. 190-200, 2011.
28. B. Bringmann and W. Knapp, "Model-based 'Chase-the-Ball' calibration of a 5-axis machining center," CIRP Annals - Manufacturing Technology, Vol.55, No.1, pp. 531-534, 2006.
29. J. Bryan, "A simple method for testing measuring machines and machine tools. Part 2: Construction details," Precision Engineering, Vol.4, No.3, pp. 125-138, 1982.
30. A. Matsubara, K. Nagaoka, and T. Fujita, "Model-reference feedforward controller design for high-accuracy contouring control of machine tool axes," CIRP Annals - Manufacturing Technology, Vol.60, pp. 415-418, 2011.
31. C. Wang and B. Griffin, "A noncontact laser technique for circular contouring accuracy measurement," Review of Scientific Instruments, 72-2, pp. 1594-1596, 2001.
32. W. Knapp and S. Hrovat, "The Circular Test for Testing NC Machine Tools," S. Hrovat, Zurich, 1987.
33. G. T. Smith, C. Sims, A. D. Hope, and M. Gull, "A stereometric artefact for volumetric calibration of machining centres," Laser Metrology and Machine Performance 5, 2001.
34. Y. Kakino, Y. Ihara, and A. Shinohara, "Accuracy Inspection of NC Machine Tools by Double Ball Bar Method," Hanser Publishers, 1993.
35. W. Knapp, "Test of the Three-Dimensional Uncertainty of Machine Tools and Measuring Machines and its Relation to the Machine Errors," CIRP Annals - Manufacturing Technology, Vol.32, No.1, pp. 459-464, 1983.
36. Y. Kakino, Y. Ihara, and Y. Nakatsu, "The Measurement of Motion Errors of NC Machine Tools and Diagnosis of their Origins by Using Telescoping Magnetic Ball Bar Method," CIRP Annals - Manufacturing Technology, Vol.36, No.1, pp. 377-380, 1987.
37. S.-W. Hong, Y.-J. Shin, and H.-S. Lee, "An efficient method for identification of motion error sources from circular test results in NC machines," Int. J. of Machine Tools and Manufacture, Vol.77, Issue 3, pp. 327-340, 1997.
38. H. J. Pahk, Y. S. Kim, and J. H. Moon, "A New Technique for Volumetric Error Assessment of Machine Tools Incorporating Ball Bar Measurement and 3D Volumetric Error Model," Int. J. of Machine Tools and Manufacture, Vol.37, Issue 11, pp. 1583-1596, 1997.
39. J.-M. Lai, J.-S. Liao, and W.-H. Chieng, "Modeling and analysis of nonlinear guideway for double ball bar (DBB) measurement and diagnosis," Int. J. of Machine Tools and Manufacture, Vol.37, Issue 5, pp. 687-707, 1997.
40. G. H. J. Florussen, F. L. M. Delbressine, M. J. G. van de Molengraft, and P. H. J. Schellekens, "Assessing geometrical errors of multi-axis machines by three-dimensional length measurements," Measurement, Vol.30, No.4, pp. 241-255, 2001.
41. G. Florussen, F. Delbressine, and P. Schellekens, "Assessing Thermally Induced Errors of Machine Tools by 3D Length Measurements," CIRP Annals - Manufacturing Technology, Vol.52, No.1, pp. 333-336, 2003.
42. S.-H. Yang, K.-H. Kim, and Y. K. Park, "Measurement of spindle thermal errors in machine tool using hemispherical ball bar test," Int. J. of Machine Tools and Manufacture, Vol.44, Issue 2/3, pp. 333-340, 2004.
43. ISO 230-6, "Test code for machine tools - Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)," 2002.
44. S. Ibaraki and T. Hata, "A new formulation of laser step diagonal measurement - Three-dimensional case," Precision Engineering, Vol.34, No.3, pp. 516-525, 2010.
45. L. Zhou and P. Vanherck, "A method for squareness error verification on a coordinate measuring machine," Int. J. of Advanced Manufacturing Technology, Vol.21, pp. 874-878, 2003.
46. T. J. Morris, "A new slant on diagonal laser testing," Laser Metrology and Machine Performance 5, pp. 29-40, 2001.
47. M. Chapman, "Limitations of laser diagonal measurements," Precision Engineering, Vol.27, No.4, pp. 401-406, 2003.
48. th Int. Conf. on Positioning Technology, 2010.
49. C. Wang, "Laser vector measurement technique for the determination and compensation of volumetric positioning errors. Part I: Basic theory," Review of Scientific Instruments, Vol.71, No.10, pp. 3933-3937, 2000.
50. J. Janeczko, B. Griffin, and C. Wang, "Laser vector measurement technique for the determination and compensation of volumetric position errors. Part II: Experimental verification," Review of Scientific Instruments, Vol.71, No.10, pp. 3938-3941, 2000.
51. H. Zhang, J. Yang, Y. Zhang, J. Shen, and C. Wang, "Measurement and compensation for volumetric positioning errors of CNC machine tools considering thermal effect," Int. J. of Advanced Manufacturing Technology, Vol.55, No.1/4, pp. 275-283, 2010.
52. Z. He, J. Fu, and X. Yao, "Volumetric Error Identification for CNC Machine Tool Based on Multi-body System and Vector Diagonal Measurement," Proc. of Int. Sympo. on Precision Engineering and Micro/Nanotechnology (ISPEN), 2009.
53. S. Ibaraki, T. Hata, and Matsubara, "A new formulation of laser step-diagonal measurement - two-dimensional case," Precision Engineering, Vol.33, No.1, pp. 56-64, 2009.
54. Y. Jianguo, R. Yongqiang, C. Wang, and G. Liotto, "Theoretical derivations of 4 body diagonal displacement errors in 4 machine configurations," Laser Metrology and Machine Performance 8, 2005.
55. C. Wang and G. Liotto, "A theoretical analysis of 4 body diagonal displacement measurement and sequential step diagonal measurement," Laser Metrology and Machine Performance 6, 2006.
56. G. Sato and S. Ibaraki, "The estimation of angular errors of machine tools using by laser diagonal measurement," Proc. of the 2011 Fall JSPE Semiannual Meeting, 2011. (in Japanese)
57. G. Zhang, R. Ouyang, B. Lu, R. Hocken, R. Veale, and A. Donmez, "A Displacement Method for Machine Geometry Calibration," CIRP Annals - Manufacturing Technology, Vol.37, No.1, pp. 515-518, 1988.
58. J. S. Chen, T.W. Kou, and S. H. Chiou, "Geometric error calibration of multi-axis machines using an auto-alignment laser interferometer," Precision Engineering, Vol.23, No.4, pp. 243-252, 1999.
59. G. Chen, J. Yuan, and J. Ni, "A displacement measurement approach for machine geometric error assessment," Int. J. of Machine Tools and Manufacture, Vol.41, pp. 149-161, 2001.
60. A. Balsamo, P. Pedone, E. Ricci, and M. Verdi, "Low-cost interferometric compensation of geometrical errors," CIRP Annals - Manufacturing Technology, Vol.58, No.1, pp. 459-462, 2009.
61. ISO 10360-2, "Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions," 2009.
62. P. Cauchick-Miguel, "CMM verification: a survey," Measurement, 17-1, pp. 1-16, 1996.
63. G. Peggs, "Creating a Standards Infrastructure for Co-Ordinate Measurement Technology in the UK," CIRP Annals - Manufacturing Technology, Vol.38, No.1, pp. 521-523, 1989.
64. G. X. Zhang and Y. F. Zang, "A Method for Machine Geometry Calibration Using 1-D Ball Array," CIRP Annals - Manufacturing Technology, Vol.40, No.1, pp. 519-522, 1991.
65. E. Trapet, J. Aguilarmartin, J. Yague, H. Spaan, and V. Zeleny, "Self-centering probes with parallel kinematics to verify machinetools," Precision Engineering, Vol.30, No.2, pp. 165-179, 2006.
66. H. Kunzmann, "A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects," CIRP Annals - Manufacturing Technology, Vol.39, No.1, pp. 561-564, 1990.
67. E. Trapet and F. Wiudele, "A reference object based method to determine the parametric error components of coordinate measuring machines and machine tools," Measurement, Vol.9, Issue 1, pp. 17-22, 1991.
68. X. Mao, B. Li, H. Shi, H. Liu, X. Li, and P. Li, "Error measurement and assemble error correction of a 3D-step-gauge," Frontiers of Mechanical Engineering in China, Vol.2, No.4, pp. 388-393, 2007.
69. B. Bringmann, A. Küng, and W. Knapp, "A Measuring Artefact for true 3D Machine Testing and Calibration," CIRP Annals - Manufacturing Technology, Vol.54, No.1, pp. 471-474, 2005.
70. T. Liebrich, B. Bringmann, and W. Knapp, "Calibration of a 3D-ball plate," Precision Engineering, Vol.33, No.1, pp. 1-6, Jan. 2009.
71. A. Teimel, "Technology and applications of grating interferometers in high-precision measurement," Precision Engineering, Vol.14, No.3, pp. 147-154, 1992.
72. W. Gao and A. Kimura, "A Three-axis Displacement Sensor with Nanometric Resolution," CIRP Annals - Manufacturing Technology, Vol.56, No.1, pp. 529-532, 2007.
73. W. Knapp and S. Weikert, "Testing the contouring performance in 6 degrees of freedom," Annals of the CIRP, Vol.48, No.1, pp. 433-436, 1999.
74. K. Lee, S. Ibaraki, A. Matsubara, Y. Kakino, Y. Suzuki, S. Arai, and J. Braasch, "A Servo Parameter Tuning Method for High-speed NCMachine Tools based on Contouring Error Measurement," Laser Metrology and Machine Performance VI, WIT Press, 2002.
75. K. Nagaoka, A. Matsubara, T. Fujita, and T. Sato, "Analysis Method of Motion Accuracy Using NC System with Synchronized Measurement of Tool-Tip Position," Int. J. of Automation Technology, Vol.3, No.4, pp. 394-400, 2009.
76. Z. Du, S. Zhang, and M. Hong, "Development of a multi-step measuring method for motion accuracy of NC machine tools based on cross grid encoder," Int. J. of Machine Tools and Manufacture, Vol.50, Issue 3, pp. 270-280, 2010.
77. W. Zhu, Z. Wang, and K. Yamazaki, "Machine tool component error extraction and error compensation by incorporating statistical analysis," Int. J. of Machine Tools and Manufacture, Vol.50, Issue 9, pp. 798-806, 2010.
78. S. Ibaraki and Y. Tanizawa, "Vision-Based Measurement of Two- Dimensional Positioning Errors of Machine Tools," J. of Advanced Mechanical Design, Systems, and Manufacturing, Vol.5, No.4, pp. 315-328, 2011.
79. E. Loewen, "Self-Calibration: Reversal, Redundancy, Error Separation, and 'Absolute Testing'," CIRP Annals - Manufacturing Technology, Vol.45, No.2, pp. 617-634, 1996.
80. J. Ye, "An exact algorithm for self-calibration of two-dimensional precision metrology stages," Precision Engineering, Vol.20, No.1, pp. 16-32, 1997.
81. S. Ibaraki, W. Goto, A. Matsubara, T. Ochi, and M. Hamamura, "Self-calibration of a cross grid encoder," J. of the Japan Society for Precision Engineering, Vol.72, No.8, pp. 1032-1037, 2006. (in Japanese)
82. O. Sato, S. Osawa, and T. Takatsuji, "Calibration of two dimensional grid prates with the reversal measuring technique," Proc. Of Asian Sympo. for Precision Engineering and Nanotechnology (ASPEN), 2009.
83. M. Ushio, H. Ushijima, M. Kouya, H. Narahara, and H. Suzuki, "Development of a Motion Accuracy Measurement System of NC Machine Tools," J. of the Japan Society for Precision Engineering, Vol.71, No.8, pp. 1000-1004, 2005. (in Japanese)
84. T. Saiki, M. Tsutsumi, and H. Suzuki, "Development of Measurement for Motion Accuracy of 5 Axis NC Machine Tool," Int. J. of Automation Technology, Vol.2, No.2, pp. 111-118, 2008.
85. H. Qiu, Y. Li, and Y. Li, "A new method and device for motion accuracy measurement of NC machine tools. Part 1: principle and equipment," Int. J. of Machine Tools and Manufacture, Vol.41, Issue 4,pp. 521-534, 2001.
86. K. Iwasawa, A. Iwama, and K. Mitsui, "Development of a measuring method for several types of programmed tool paths for NC machine tools using a laser displacement interferometer and a rotary encoder," Precision Engineering, Vol.28, No.4, pp. 399-408, 2004.
87. H. Iwai and K. Mitsui, "Development of a measuring method for motion accuracy of NC machine tools using links and rotary encoders," Int. J. of Machine Tools and Manufacture, Vol.49, Issue 1,pp. 99-108, 2009.
88. Y. Ihara and S. Matsushita, "A Study on Tool Position and Posture Measurement Device by Using Parallel Mechanism," Int. J. of Automation Technology, Vol.3, No.3, pp. 271-276, 2009.
89. st Report: Principle of Measurement Method and Measurement Experiments)," Trans. of the Japan Society of Mechanical Engineers (C), Vol.68, No.676, pp. 3735-3741, 2002. (in Japanese)
90. J. Ziegert and C. Mize, "The laser ball bar: a new instrument for machine tool metrology," Precision Engineering, Vol.16, No.4, pp. 259-267, 1994.
91. T. Schmitz and J. Ziegert, "Dynamic evaluation of spatial CNC contouring accuracy," Precision Engineering, Vol.24, No.2, pp. 99-118, 2000.
92. K.-C. Fan, H. Wang, F.-J. Shiou, and C.-W. Ke, "Design analysis and applications of a 3D laser ball bar for accuracy calibration of multiaxis machines," J. of Manufacturing Systems, Vol.23, Issue 4, pp. 338-338, 2004.
93. T. Takatsuji, M. Goto, S. Osawa, R. Yin, and T. Kurosawa, "Wholeviewing- angle cat's-eye retroreflector as a target of laser trackers," Measurement Science and Technology, Vol.10, No.7, pp. 87-90, 1999.
94. K. Lau, R. Hocken, and W. Haight, "Automatic laser tracking interferometer system for robot metrology," Precision Engineering, Vol.8, No.1, pp. 3-8, 1986.
95. A. Kohama, R. Mori, S. Komai, M. Suzuki, S. Aoyagi, J. Fujioka, and Y. Kamiya, "Calibration of kinematic parameters of a robot using neural networks by a laser tracking system," Proc. of 7th Int. Conf. on Machine Automation, pp. 251-256, 2008.
96. G. N. Peggs, "Virtual technologies for advanced manufacturing and metrology," Int. J. of Computer Integrated Manufacturing, Vol.16, No.7/8, pp. 485-490, 2003.
97. E. B. Hughes, A. Wilson, and G. N. Peggs, "Design of a highaccuracy CMMbased on multi-lateration techniques," CIRP Annals - Manufacturing Technology, Vol.49, No.1, pp. 391-394, 2000.
98. H. Schwenke, M. Franke, J. Hannaford, and H. Kunzmann, "Error mapping of CMMs and machine tools by a single tracking interferometer," CIRP Annals - Manufacturing Technology, Vol.54, No.1, pp. 475-478, 2005.
99. K. Umetsu, R. Furutnani, S. Osawa, T. Takatsuji, and T. Kurosawa, "Geometric calibration of a coordinate measuring machine using a laser tracking system," Measurement Science and Technology, Vol.16, pp. 2466-2472, 2005.
100. T. Yano, T. Takatsuji, S. Osawa, T. Suzuki, Y. Motomura, and T. Itabe, "Development of a Small Two Axis Spherical Motor Type Laser Tracker with Submicron Measurement Accuracy," IEEJ Trans. on Sensors and Micromachines, Vol.126, No.4, pp. 144-149, 2006. (in Japanese)
101. H. Schwenke, R. Schmitt, P. Jatzkowski, and C. Warmann, "Onthe- fly calibration of linear and rotary axes of machine tools and CMMs using a tracking interferometer," CIRP Annals - Manufacturing Technology, Vol.58, No.1, pp. 477-480, 2009.
102. S. Ibaraki, K. Takeuchi, T. Yano, T. Takatsuji, S. Osawa, and O. Sato, "Estimation of Three-Dimensional Volumetric Errors of Numerically Controlled Machine Tools by a Tracking Interferometer," J. of Mechanics and Automation, pp. 313-319, 2011.
103. T. Takatsuji, M. Goto, A. Kirita, T. Kurosawa, and Y. Tanimura, "The relationship between the measurement error and the arrangement of laser trackers in laser trilateration," Measurement Science and Technology, Vol.11, No.5, pp. 477-483, 2000.
104. ISO 10791-1, "Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)," 1998.
105. ISO 10791-2, "Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)," 2001.
106. ISO 10791-3, "Test conditions for machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)," 1998.
107. ISO/CD 10791-1, "Test conditions for machining centres - Part 1: Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)," 2011.
108. ISO 10791-6, "Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations," 1998.
109. ISO/CD 10791-6, "Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations, 2011.
110. Y. Kakino, Y. Ihara, H. Sato, and H. Otsubo, "A Study on the motion accuracy of NC machine tools (7th report) -Measurement of motion accuracy of 5-axis machine by DBB tests-," J. of Japan Society for Precision Engineering, Vol.60, No.5, pp. 718-723, 1994. (in Japanese)
111. S. Sakamoto, I. Inasaki, H. Tsukamoto, and T. Ichikizaki, "Identification of alignment errors in five-axis machining centers using telescoping ballbar," Trans. of the Japan Society of Mechanical Engineers (C), Vol.63, No.605, pp. 262-267, 1997. (in Japanese)
112. R. M. Mahbubur, J. Heikkala, K. Lappalainen, and J. A. Karjalainen, "Positioning accuracy improvement in five-axis milling by post processing," Int. J. of Machine Tools and Manufacture, Vol.37, Issue 2, pp. 223-236, 1997.
113. Y. Abbaszaheh-Mir, J. R. R. Mayer, G. Clotier, and C. Fortin, "Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ballbar," Int. J. of Production Research, Vol.40, Issue 18, pp. 4781-4797, 2002.
114. Z. Li, Y. Kakino, A. Kawashima, Y. Ihara, I. Yamaji, and M. Wakizaka, "Diagnosis of Motion Errors of the Rotary Axes in 5-axis Machining Center (1st Report) - The Procedure for Diagnosis of Angular Error Sources -," J. of the Japan Society for Precision Engineering, Vol.69, No.5, pp. 703-709, 2003. (in Japanese)
115. S. Zargarbashi and J. Mayer, "Assessment of machine tool trunnion axis motion error, using magnetic double ball bar," Int. J. of Machine Tools and Manufacture, Vol.46, Issue 14, pp. 1823-1834, Nov. 2006.
116. W. Lei, M. Sung, W. Liu, and Y. Chuang, "Double ballbar test for the rotary axes of five-axis CNC machine tools," Int. J. of Machine Tools and Manufacture, Vol.47, Issue 2, pp. 273-285, 2007.
117. M. S. Uddin, S. Ibaraki, A. Matsubara, and T. Matsushita, "Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors," Precision Engineering, Vol.33, No.2, pp. 194-201, 2009.
118. S. Ibaraki, Y. Kakino, T. Akai, N. Takayama, I. Yamaji, and K. Ogawa, "Identification of Motion Error Sources on Five-axis Machine Tools by Ball-bar Measurements (1st Report) - Classification ofMotion Error Components and Development of the Modified Ball Bar Device (DBB5) -," J. of the Japan Society for Precision Engineering, Vol.76, No.3, pp. 333-337, 2010. (in Japanese)
119. K. Dassanayake, M. Tsutsumi, and A. Saito, "A strategy for identifying static deviations in universal spindle head type multi-axis machining centers," Int. J. of Machine Tools and Manufacture, Vol.46, Issue 10, pp. 1097-1106, 2006.
120. K. Dassanayake, C. Cui and M. Tsutsumi, "Accuracy evaluation method for multi-tasking turning centre," Int. J. Mechatronics and Manufacturing Systems, Vol.4, No.3/4, pp. 285-303, 2011.
121. S. Ibaraki, M. Sawada, A. Matsubara, M. Mori, K. Kashihara, and Y. Kakino, "Measurement of Dynamic Angular Error of a Rotation Axis of a Universal Spindle on Integrated Machine Tools by Using the Ball Bar Method," J. of the Japan Society for Precision Engineering, Vol.73, No.5, pp. 583-587, 2007. (in Japanese)
122. M. Tsutsumi, N. Miyama, C. Cui, T. Saiki, and A. Saito, "Generalization of Identification Method of Geometric Deviations for Mixed Type Five-Axis Machining Centres," Trans. of the Japan Society of Mechanical Engineers (C), Vol.76, No.776, pp. 1597-1608, 2011. (in Japanese)
123. M. Dasssanayake, M. Tsutsumi, K. Higashiyama, and K. Yamamoto, "An approach to estimate the inherent deviations by means of simultaneous five-axis motion," Proc. of the 4th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), pp. 423-428, 2007.
124. Y. Ihara and K. Tanaka, "Ball bar measurement equivalent to cone frustum cutting on multi-axis machine: Comparison of ball bar measurement with cutting test on spindle-tilt type 5-axis MC," J. of the Japan Society for Precision Engineering, Vol.71, No.12, pp. 1553-1557, 2005. (in Japanese)
125. D. Yumiza, K. Utsumi, M. Tsutsumi, and R. Sato, "Accuracy Assessment of Synchronous Motion in Five-axis Machining Centers," Proc. of the CIRP 2nd Int. Conf. on High Performance Cutting, 2006.
126. R. Sato and M. Tsutsumi, "High Performance Motion Control of Rotary Table for 5-Axis Machining Centers," Int. J. of Automation Technology, Vol.1, No.2, pp. 113-119, 2007
127. W. T. Lei, I. M. Paung, and C.-C. Yu, "Total ballbar dynamic tests for five-axis CNCmachine tools," Int. J. ofMachine Tools and Manufacture, Vol.49, Issue 6, pp. 488-499, 2009.
128. K. Ustumi, T. Kosugi, A. Saito, and M. Tsutsumi, "Measurement Method of Geometric Accuracy of Five-axis Controlled Machining Centres: Measurement by a Master Ball and a Displacement Sensor," Trans. of the Japan Society of Mechanical Engineers (C), Vol.72, No.719, pp. 2293-2298, 2006. (in Japanese)
129. S. Weikert, "R-Test, a New Device for Accuracy Measurements on Five Axis Machine Tools," CIRP Annals - Manufacturing Technology, Vol.53, No.1, pp. 429-432, 2004.
130. S. Ibaraki, C. Hong, and C. Oyama, "Construction of an error map of rotary axes by static R-test," Proc. of the 6th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), 2011.
131. th Lamdamap Conference, pp.196-202, 2007.
132. European patent, EP 1549459 B1, "System and process for measuring, compensating and testing numerically controlled machine tool heads and/or tables," 2007.
133. M. Slamani, R. Mayer, M. Balazinski, S. H. H. Zargarbashi, S. Engin, and C. Lartigue, "Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements," Int. J. of Advanced Manufacturing Technology, Vol.50, No.9/12, pp. 1063-1073, 2010.
134. L. Andolfatto, J. R. R. Mayer, and S. Lavernhe, "Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance," Int. J. of Machine Tools and Manufacture, Vol.51, Issue 7/8, pp. 618-627, 2011.
135. W. T. Lei and Y. Y. Hsu, "Accuracy test of five-axis CNC machine tool with 3D probe-ball. Part I: design and modeling," Int. J. of Machine Tools and Manufacture, Vol.42, Issue 10, pp. 1153-1162, 2002.
136. W. T. Lei and Y. Y. Hsu, "Accuracy test of five-axis CNC machine tool with 3D probe-ball. Part II: errors estimation," Int. J. of Machine Tools and Manufacture, Vol.42, Issue 10, pp. 1163-1170, 2002.
137. K. Tajima, M. Dassanayake, C. Cui, and M. Tsutsumi, "Development of 3D-probe for measuring the rotation accuracy of tilting rotary tables," Proc. of the 8th Manufacturing and Machine Tool Conf., pp. 287-288, 2010. (in Japanese)
138. Y. Ihara and Y. Hiramatsu, "Design of Motion Accuracy Measurement Device for NC Machine Tools with Three Displacement Sensors," Int. J. of Automation Technology, Vol.5, No.6, pp. 847-854, 2011.
139. C. Hong and S. Ibaraki, "Non-contact R-test for Dynamic Measurement on Five-axis Machine Tool," Proc. of the 6th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), 2011.
140. B. Bringmann, J. Besuchet, and L. Rohr, "Systematic evaluation of calibration methods," CIRP Annals - Manufacturing Technology, Vol.57, No.1, pp. 529-532, 2008.
141. B. Bringmann and W. Knapp, "Machine tool calibration: Geometric test uncertainty depends on machine tool performance," Precision Engineering, Vol.33, No.4, pp. 524-529, 2009.
142. B. Bringmann and P. Maglie, "A method for direct evaluation of the dynamic 3D path accuracy of NC machine tools," CIRP Annals - Manufacturing Technology, Vol.58, No.1, pp. 343-346, 2009.
143. Y. Ota and S. Ibaraki, "Evaluation of dynamic errors of rotary axis in five-axis machining centers at the reversing point," Proc. of the JSME Mechanical Engineering Congress 2011, 2011.
144. C. Hong and S. Ibaraki, "Observation of thermal influence on error motions of rotary axes on a five-axis machine tool by static R-test," To be presented in Int. J. of Automation Technology, Vol.6, No.2, pp. 196-204, 2012.
145. ISO 230-10, "Test code for machine tools - Part 10: Determination of measuring performance of probing systems of numerically controlled machine tools," 2011.
146. ISO 10360-3, "Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis," 2000.
147. US Patent, US 7278222, "Method for measuring a programcontrolled machine tool," 2007.
148. T. Yamamoto and M. Tsutsumi, "Determination of axis of rotation of rotary table for five-axis machining centers," J. of the Japan Society for Precision Engineering, Vol.77, No.3, pp. 301-305, 2011. (in Japanese)
149. T. Erkan and J. R. R. Mayer, "A cluster analysis applied to volumetric errors of five-axis machine tools obtained by probing an uncalibrated artefact," CIRP Annals - Manufacturing Technology, Vol.59, No.1, pp. 539-542, 2010.
150. T. Erkan, J. R. R. Mayer, and Y. Dupont, "Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact," Precision Engineering, Vol.35, pp. 116-125, 2011.
151. T. Iritani, S. Ibaraki, and T. Matsushita, "Error calibration for 5-axis controlled machine tools based on on-machine geometric measurement of artifact," Proc. of the 2010 Spring JSPE Semiannual Meeting, pp. 1023-1024, 2010. (in Japanese)
152. T. Matsushita and T. Oki, "Identification of Geometric Errors in Five-axis Controlled Machine Tool with Touch Trigger Probe," Proc. of the 2010 Spring JSPE Semiannual meeting, pp. 1105-1106, 2010. (in Japanese)
153. S. Ibaraki, T. Iritani, and T. Matsushita, "Error Calibration on Fiveaxis Machine Tools by on-the-machine Measurement of Artifacts using a Touch-trigger Probe," Proc. of 4th CIRP Int. Conf. on High Performance Cutting (CIRP HPC 2010), 2010.
154. T. Hayashi, X. Liu, Y. Kiyoshi, K. Yamazaki, and M. Mori, "Laser-CCD Based Measurement System for Angular Motion of Integrated Machine Tools," in Proc. of Int. Conf. on Leading Edge Manufacturing in 21st century (LEM21), pp. 85-90, 2005.
155. NAS 979, "Uniform cutting test - NAS series. Metal cutting equipments," 1969.
156. ISO/CD 10701-7, "Test conditions for machining centres - Part 7: Accuracy of a finished test piece," 2011.
157. S. Bossoni and J. Cupic, "Test piece for simultaneous 5-axis machining," Laser metrology and machine performance 8, pp. 24-33, 2007.
158. N. Kata, M. Tsutsumi, Y. Tsuchihashi, D. Yumiza, C. Cui, and Y. Ihara, "Analysis of NC data for machining test of cone-frustum under simultaneous five-axis control," Trans. of the Japan Society of Mechanical Engineers Series C, Vol.77, No.780, pp. 3149-3160, 2011. (in Japanese)
159. T. Matsushita, T. Oki, A. Matsubara, "The accuracy of cone frustum machined by five-axis machine tool with tilting table," J. of the Japan Society for Precision Engineering, Vol.74, No.6, pp. 632-636, 2008. (in Japanese)
160. T. Matsushita and A. Matsubara, "Identification and compensation of geometric errors in five-axis machine tools with a tilting rotary table using conic trajectories measured by double ball bar," J. of the Japan Society for Precision Engineering, Vol.77, No.6, pp. 594-598, 2011. (in Japanese)
161. C. Hong, S. Ibaraki, and A. Matsubara, "Influence of positiondependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools," Precision Engineering, Vol.35, No.1, pp. 1-11, 2011.
162. http://www.ncg.de
163. M. Tsutsumi, T. Saiki, K. Kiotoshi, C. Cui, and Y. Ihara, "Development of Testing Method of Five-Axis Machining Centres Based on Finishing of Truncated Square Pyramid," Trans. of the Japan Society of Mechanical Engineers Series C, Vol.77, No.780, pp. 3137-3148, 2011. (in Japanese)
164. H. Takeshima and Y. Ihara, "Finished Test Piece Example for Fiveaxis Machining Centers," Proc. of the 5th Int. Conf. on Leading Edge Manufacturing in 21st century (LEM21), pp. 123-126, 2009.
165. P. Lin and C. Tzeng, "Modeling and measurement of active parameters and workpiece home position of a multi-axis machine tool," Int. J. of Machine Tools and Manufacture, Vol.48, Issue 3/4, pp. 338-349, 2008.
166. M. Bono and J. Kroll, "Tool setting on a B-axis rotary table of a precision lathe," Int. J. of Machine Tools and Manufacture, Vol.48, Issue 11, pp. 1261-1267, 2008.
167. T. Ohashi, Y. Morimoto, Y. Ichida, R. Sato, K. Ugamochi, and T. Akaba, "Study on Accuracy Compensation of Machining Center Based on Measurement Results of Workpiece (3rd Report) - Accuracy Compensation of
168. ISO 10701-7, " Test conditions for machining centres - Part 7: Accuracy of a finished test piece," 2006.
169. ISO 13041-6, "Test Conditions for Numerically Controlled Turning Machines and Turning Centres. Part 6. Accuracy of a Finished Test Piece," 2005.
170. Y. Morimoto, K. Nakato, and M. Gontani, "Study on Accuracy Evaluation of Machining Center Based on Measurement Results of Machined Workpiece - Evaluation of Accuracy of 5-axis Controlled Machining Center -," Proc. of the 6th Int. Conf. on Leading Edge Manufacturing in 21st century (LEM21), 2011.
171. S. Ibaraki, M. Sawada, A. Matsubara, and T. Matsushita, "Machining tests to identify kinematic errors on five-axis machine tools," Precision Engineering, Vol.34, No.3, pp. 387-398, 2010.
172. T. Yamamoto, T. Hasebe, and M. Tsutsumi, "Development of testing method for five-axis machining centers by thin groove cutting," J. of the Japan Society for Precision Engineering, Vol.77, No.4, pp. 405-410, 2011. (in Japanese)
173. T. Yamamoto, T. Hasebe, and M. Tsutsumi, "Development of fiveaxis machining center geometric errors estimation method by thin groove cutting," J. of the Japan Society for Precision Engineering, Vol.77, No.8, pp. 776-780, 2011. (in Japanese)