Vision-based measurement of two-dimensional positioning errors of machine tools

Journal of Advanced Mechanical Design, Systems and Manufacturing

Volumn 5, Issue 4, 2011, Pages 315-328

  Ibaraki, Soichi ^a   Tanizawa, Yusuke ^a  

^a KYOTO UNIVERSITY   (Japan)

Author keywords

Camera; Five Axis Machining Center; Grid; Vision Based Measurement; Volumetric Accuracy

Indexed keywords

CHARGE COUPLED DEVICE CAMERA; DYNAMIC ERROR; ERROR CALIBRATION; EXPERIMENTAL APPLICATION; FIVE-AXIS MACHINING; GRID; GRID POINTS; POSITIONING ERROR; VISION-BASED MEASUREMENTS; VOLUMETRIC ACCURACY; WORKING DISTANCES;

CAMERAS; CHARGE COUPLED DEVICES; MACHINE TOOLS; MEASUREMENTS; TWO DIMENSIONAL; VOLUMETRIC ANALYSIS;

MEASUREMENT ERRORS;

EID: 82455174288     PISSN: None     EISSN: 18813054     Source Type: Journal    
DOI: 10.1299/jamdsm.5.315     Document Type: Article

References (24)

1. ISO/PDTR 16907:2011, Numerical compensation of geometric errors of machine tools.
2. ISO/FDIS 230-1:2011, Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions.
3. H. Schwenke,W. Knapp, H. Haitjema, A.Weckenmann, R. Schmitt, and F. Delbressine, Geometric error measurement and compensation of machines -An update, CIRP Annals - Manufacturing Technology, Vol.57, No.2, (2008), pp.560-575.
4. R. Ramesh, M. A. Mannan, and A. N. Poo, Error compensation in machine tools - a review: Part I: geometric, cutting-force induced and fixture-dependent errors, International Journal of Machine Tools and Manufacture, Vol.40, No.9, (2000), pp.1235-1256. (Pubitemid 30592198)
5. ISO 230-4:2005, Test code for machine tools - Part 4: Circular tests for numerically controlled machine tools.
6. Y. Kakino, Y. Ihara, and A. Shinohara, Accuracy Inspection of NC Machine Tools by Double Ball Bar Method, (1993), Hanser Publishers.
7. G. N. Peggs, Virtual technologies for advanced manufacturing and metrology, International Journal of Computer Integrated Manufacturing, Vol.16, No.7-8, (2003), pp. 485-490.
8. H. Schwenke, M. Franke, J. Hannaford, and H. Kunzmann, Error mapping of CMMs and machine tools by a single tracking interferometer, CIRP Annals - Manufacturing Technology, Vol.54, No.1, (2005), pp. 475-478. (Pubitemid 40948500)
9. T. Yano, T. Takatsuji, S. Osawa, T. Suzuki, Y. Motomura, and T. Itabe, Development of a Small Two Axis Spherical Motor Type Laser Tracker with Submicron Measurement Accuracy, IEEJ Trans. on Sensors and Micromachines, Vol.126, No.4, (2006), pp.144- 149. (in Japanese)
10. Dr. Johannes Heidenhain GmbH, Measuring systems for machine tool inspection and acceptance testing (catalog), (2007).
11. A. Teimel, Technology and Application of Grating Interferometers in High Precision Measurement, Precision Engineering, Vol.4, (1992), pp.147-154.
12. W. Knapp and S. Weikert, Testing the contouring performance in 6 degrees of freedom, Annals of the CIRP - Manufacturing Technology, Vol.48, No.1, (1999), pp. 433-436.
13. K. Lee, S. Ibaraki, A. Matsubara, Y. Kakino, Y. Suzuki, S. Arai, and J. Braasch, A Servo Parameter Tuning Method for High-speed NC Machine Tools based on Contouring Error Measurement, Laser Metrology and Machine Performance VI, WIT Press, (2002).
14. Z. Du, S. Zhang, and M. Hong, Development of a multi-step measuring method for motion accuracy of NC machine tools based on cross grid encoder, International Journal of Machine Tools and Manufacture, Vol.50, No.3, (2010), pp. 270-280.
15. A. Hornberg (editor), Handbook of Machine Vision, Wiley-VCH, (2006).
16. G. Papari, N. Petkov, Edge and line oriented contour detection: State of the art, Image and Vision Computing, Vol.29, No.2-3, (2011), pp.79-103.
17. A. K. Jain, Fundamentals of Digital Image Processing. Prentice-Hall, (1989).
18. A. Matsubara, K. Nagaoka, and T. Fujita, Model-reference feedforward controller design for high-accuracy contouring control of machine tool axes, CIRP Annals - Manufacturing Technology, Vol.60, (2011), pp. 415-418.
19. S. Yi, R. M. Haralick, and L. G. Shapiro. Error propagation in machine vision, Machine Vision and Applications, Vol.7, (1994), pp.93-114.
20. M. de Santo, C. Liguori, A. Paolillo, and A. Pietrosanto, Standard uncertainty evaluation in image-based measurements, Measurement, Vol.36, (2004), pp.347-358.
21. R. Anchini, C. Liguori, and A. Paolillo, Evaluation of the uncertainty of edge detector algorithms, IEEE Transactions on Instrumentation and Measurement, Vol.56, No.3, (2007) pp.681-688. (Pubitemid 46784533)
22. S. Ibaraki, W. Goto, A. Matsubara, T. Ochi, M. Hamamura, Self-calibration of a cross grid encoder, Journal of the Japan Society for Precision Engineering, Vol.72, No. 8, (2006), pp.1032-1037 (in Japanese).
23. O. Sato, S. Osawa, and T. Takatsuji, Intercomparison of the calibration 2-D dimensional standard, Proceedings of JSPE Spring Conference, (2010), pp.375-376 (in Japanese).
24. J. Ye, M. Takac, C. N. Berglund, G. Owen, and R. F. Pease, An exact algorithm for self-calibration of two-dimensional precision metrology stages, Precision Engineering, Vol.20, No.1, (1997) pp.16-32. (Pubitemid 127427797)