In-situ tensile testing of single-crystal molybdenum-alloy fibers with various dislocation densities in a scanning electron microscope

Journal of Materials Research

Volumn 27, Issue 3, 2012, Pages 508-520

  Johanns, Kurt E ^a   Sedlmayr, Andreas ^b   Sudharshan Phani, P ^a   Mönig, Reiner ^b   Kraft, Oliver ^b   George, Easo P ^a,c   Pharr, George M ^a,c  

^a University of Tennessee   (United States)

^b KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^c OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

Mo; Strength; Stress strain relationship

Indexed keywords

AS-GROWN; COMPRESSION TESTS; DISLOCATION DENSITIES; DUAL BEAM; EDGE LENGTH; GAUGE LENGTH; IN-SITU TENSILE TEST; IN-SITU TENSILE TESTING; SCANNING ELECTRON MICROSCOPE; SQUARE CROSS SECTION; STATISTICAL MODELS; STRENGTH; STRESS-STRAIN BEHAVIORS; STRESS/STRAIN RELATIONSHIP; SUBMICRON; TENSION AND COMPRESSION; THEORETICAL STRENGTH;

ALLOYS; COMPRESSION TESTING; DISLOCATIONS (CRYSTALS); FIBERS; MOLYBDENUM; SCANNING ELECTRON MICROSCOPY; SINGLE CRYSTALS; TENSILE TESTING; YIELD STRESS;

MOLYBDENUM ALLOYS;

EID: 84856442028     PISSN: 08842914     EISSN: 20445326     Source Type: Journal    
DOI: 10.1557/jmr.2011.298     Document Type: Article

References (33)

1. M.D. Uchic and D.M. Dimiduk: A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing. Mater. Sci. Eng., A 400-401, 268 (2005).
2. J.R. Greer, W.C. Oliver, and W.D. Nix: Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients. Acta Mater. 53, 1821 (2005).
3. D. Kiener, C. Motz, T. Schöberl, M. Jenko, and G. Dehm: Determination of mechanical properties of copper at the micron scale. Adv. Eng. Mater. 8, 1119 (2006).
4. C.A. Volkert and E.T. Lilleodden: Size effects in the deformation of sub-micron Au columns. Philos. Mag. 86, 5567 (2006).
5. K.J. Hemker and W.N. Sharpe: Microscale characterization of mechanical properties. Annu. Rev. Mater. Res. 37, 93 (2007).
6. D. Kiener, W. Grosinger, G. Dehm, and R. Pippan: A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples. Acta Mater. 56, 580 (2008).
7. M.D. Uchic, P.A. Shade, andD.M.Dimiduk: Plasticity of micrometerscale single crystals in compression. Annu. Rev. Mater. Res. 39, 361 (2009).
8. A.S. Schneider, B.G. Clark, C.P. Frick, P.A. Gruber, and E. Arzt: Effect of orientation and loading rate on compression behavior of small-scale Mo pillars. Mater. Sci. Eng., A 508, 241 (2009).
9. O. Kraft, P.A. Gruber, R. Mönig, and D. Weygand: Plasticity in confined dimensions. Annu. Rev. Mater. Res. 40, 293 (2010).
10. G.M. Pharr, E.G. Herbert, and Y. Gao: The indentation size effect: A critical examination of experimental observations and mechanistic interpretations. Annu. Rev. Mater. Res. 40, 271 (2010).
11. D. Gianola and C. Eberl: Micro- and nanoscale tensile testing of materials. JOM 61, 24 (2009).
12. H. Bei, S. Shim, E.P. George, M.K. Miller, E.G. Herbert, and G.M. Pharr: Compressive strengths of molybdenum alloy micropillars prepared using a new technique. Scr. Mater. 57, 397 (2007).
13. H. Bei, S. Shim, G.M. Pharr, and E.P. George: Effects of pre-strain on the compressive stress-strain response of Mo-alloy single-crystal micropillars. Acta Mater. 56, 4762 (2008).
14. S. Ogata, J. Li, N. Hirosaki, Y. Shibutani, and S. Yip: Ideal shear strain of metals and ceramics. Phys. Rev. B 70, 104104 (2004).
15. P.S. Phani, K.E. Johanns, G. Duscher, A. Gali, E.P. George, and G.M. Pharr: Scanning transmission electron microscope observations of defects in as-grown and pre-strained Mo alloy fibers. Acta Mater. 59, 2172 (2011).
16. M.B. Lowry, D. Kiener,M.M. LeBlanc, C. Chisholm, J.N. Florando, J.W. Morris Jr., and A.M. Minor: Achieving the ideal strength in annealed molybdenum nanopillars. Acta Mater. 58, 5160 (2010).
17. R. Maaß, S. Van Petegem, C.N. Borca, and H. Van Swygenhoven: In situ Laue diffraction of metallic micropillars. Mater. Sci. Eng., A 524, 40 (2009).
18. D. Kiener, C. Motz, M. Rester, M. Jenko, and G. Dehm: FIB damage of Cu and possible consequences for miniaturized mechanical tests. Mater. Sci. Eng., A 459, 262 (2007).
19. J.R. Greer and W.D. Nix: Size dependence of mechanical properties of gold at the sub-micron scale. Appl. Phys., A Mater. Sci. Process. 80, 1625 (2005).
20. H. Bei and E.P. George: Microstructures and mechanical properties of a directionally solidified NiAl-Mo eutectic alloy. Acta Mater. 53, 69 (2005).
21. J.M. Dickinson and P.E. Armstrong: Temperature dependence of the elastic constants of molybdenum. J. Appl. Phys. 38, 602 (1967).
22. D.S. Gianola, A. Sedlmayr, R. Monig, C.A. Volkert, R.C. Major, E. Cyrankowski, S.A.S. Asif, O.L. Warren, and O. Kraft: In situ nanomechanical testing in focused ion beam and scanning electron microscopes. Rev. Sci. Instrum. 82, 063901 (2011).
23. C. Eberl, D. Gianola, and K. Hemker: Mechanical characterization of coatings using microbeam bending and digital image correlation techniques. Exp. Mech. 50, 85 (2010).
24. J-Y. Kim and J.R. Greer: Tensile and compressive behavior of gold and molybdenum single crystals at the nano-scale. Acta Mater. 57, 5245 (2009).
25. J-Y. Kim, D. Jang, and J.R. Greer: Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale. Acta Mater. 58, 2355 (2010).
26. D. Frankel, S. Milenkovic, A.J. Smith, and A.W. Hassel: Nanostructuring of NiAl-Mo eutectic alloys by selective phase dissolution. Electrochim. Acta 54, 6015 (2009).
27. P. Roediger, H.D.Wanzenboeck, G. Hochleitner, and E. Bertagnolli: Evaluation of chamber contamination in a scanning electron microscope. J. Vac. Sci. Technol. B 27, 2711 (2009).
28. W.F. van Dorp and C.W. Hagen: A critical literature reviewof focused electron beam induced deposition. J. Appl. Phys. 104, 081301 (2008).
29. S. Shim, H. Bei, M.K. Miller, G.M. Pharr, and E.P. George: Effects of focused-ion-beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface. Acta Mater. 57, 503 (2009).
30. H. Bei, S. Shim, M.K. Miller, G.M. Pharr, and E.P. George: Effects of focused-ion-beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal. Appl. Phys. Lett. 91, 111915 (2007).
31. S.S. Brenner: Tensile strength of whiskers. J. Appl. Phys. 27, 1484 (1956).
32. S.S. Brenner: Plastic deformation of copper and silver whiskers. J. Appl. Phys. 28, 1023 (1957).
33. T.A. Parthasarathy, S.I. Rao, D.M. Dimiduk, M.D. Uchic, and D.R. Trinkle: Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples. Scr. Mater. 56, 313 (2007).