Effects of synthetic phenolic antioxidants on physical, structural, mechanical and barrier properties of poly lactic acid film

Carbohydrate Polymers

Volumn 87, Issue 2, 2012, Pages 1763-1773

  Jamshidian, Majid ^a   Arab Tehrany, Elmira ^a   Cleymand, Franck ^b   Leconte, Stéphane ^c   Falher, Thierry ^c   Desobry, Stéphane ^a  

^a UNIVERSITÉ DE LORRAINE   (France)

^b INSTITUT JEAN LAMOUR   (France)

^c Institut Supérieur de Plasturgie d'Alenon   (France)

Author keywords

Atomic force microscopy; Gas barrier properties; Mechanical properties; Poly lactic acid; Synthetic phenolic antioxidants; X ray photoelectron spectroscopy

Indexed keywords

ACTIVE PACKAGING; BARRIER PROPERTIES; CRYSTALLINITIES; CRYSTALLIZATION TEMPERATURE; FILM MICROSTRUCTURES; GAS BARRIER PROPERTIES; MELTING TEMPERATURES; OXYGEN PERMEABILITY; PHENOLIC ANTIOXIDANT; POLY LACTIC ACID; POLYLACTIC ACIDS; ROUGHNESS PARAMETERS; SURFACE HYDROPHILICITY; SYNTHETIC PHENOLIC ANTIOXIDANTS; TECHNICAL PROPERTIES; WATER VAPOR PERMEABILITY; YOUNG'S MODULUS;

ATOMIC FORCE MICROSCOPY; GLASS TRANSITION; HYDROPHILICITY; LACTIC ACID; PHENOLS; SURFACE CHEMISTRY; TENSILE STRENGTH; WATER VAPOR; X RAY PHOTOELECTRON SPECTROSCOPY;

MECHANICAL PROPERTIES;

EID: 81255157793     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2011.09.089     Document Type: Article

References (66)

1. M. Arnoult, E. Dargent, and J.F. Mano Mobile amorphous phase fragility in semi-crystalline polymers: Comparison of PET and PLLA Polymer 48 2007 1012 1019 (Pubitemid 46201671)
2. O.L. Aruoma Free radicals, oxidative stress, and antioxidants in human health and disease Journal of the American Oil Chemists' Society 75 1998 199 212
3. I.S. Arvanitoyannis Totally and partially biodegradable polymer blends based on natural and synthetic macromolecules: Preparation, physical properties, and potential as food packaging materials Journal of Macromolecular Science - Reviews in Macromolecular Chemistry and Physics 39C 2 1999 205 271
4. ASME US National Standard ASME B46.1, surface texture (surface roughness, waviness and lay) 1995 The American Society of Mechanical Engineers New York, United States
5. ASTM Standard test method for oxygen gas transmission rate through plastic film and sheeting using a coulometric sensor Annual book of American Standard Testing Methods, D3985 1995 ASTM Philadelphia, PA
6. ASTM Standard test method for water vapor transmission rate through plastic film and sheeting using a modulated infrared sensor Annual book of American Standard Testing Methods, F1249 1995 ASTM Philadelphia, PA
7. ASTM Standard test methods for thickness of solid electrical insulation Annual book of American Standard Testing Methods, D374-99 1999 ASTM Philadelphia, PA
8. ASTM Standard method for tensile properties of thin plastic sheeting Annual book of American Standard Testing Methods, D 882-02 2002 ASTM Philadelphia, PA
9. Auras, B. Harte, and S. Selke Effect of water on the oxygen barrier properties of poly(ethylene terephthalate) and polylactide films Journal of Applied Polymer Science 92 3 2004 1790 1803 (Pubitemid 38517705)
10. R.A. Auras, S.P. Singh, and J.J. Singh Evaluation of oriented poly(lactide) polymers vs. existing PET and oriented PS for fresh food service containers Packaging Technology and Science 18 4 2005 207 216 (Pubitemid 41229465)
11. F. Awaja, M. Gilbert, G. Kelly, B. Fox, and P. Pigram Adhesion of polymers Progress in Polymer Science 34 2009 948 968
12. Y. Byun, Y.T. Kim, and S. Whiteside Characterization of an antioxidant polylactic acid (PLA) film prepared with α-tocopherol, BHT and polyethylene glycol using film cast extruder Journal of Food Engineering 100 2010 239 244
13. C. Chaiwong, P. Rachtanapun, P. Wongchaiya, R. Auras, and D. Boonyawan Effect of plasma treatment on hydrophobicity and barrier property of polylactic acid Surface and Coating Technology 204 2010 2933 2939
14. G. Colomines, S. Domenek, V. Ducruet, and A. Guinault Influences of the crystallisation rate on thermal and barrier properties of polylactide acid (PLA) food packaging films International Journal of Material Forming 1 Suppl. 1 2008 607 610
15. M.S. Dopico-Garcia, J.M. Lopez-Vilarino, and M.V. Gonzalez-Rodriguez Antioxidant content of and migration from commercial polyethylene, polypropylene, and polyvinyl chloride packages Journal of Agricultural and Food Chemistry 55 2007 3225 3231 (Pubitemid 46668339)
16. R. Dorati, I. Genta, C. Colonna, T. Modena, F. Pavanetto, and P. Perugini Investigation of the degradation behaviour of poly(ethylene glycol-co-d,l-lactide) copolymer, poly(ethylene glycol-co-d,l-lactide) copolymer Polymer Degradation and Stability 92 2007 1660 1668 (Pubitemid 47361351)
17. J.R. Dorgan, H. Lehermeier, and M. Mang Thermal and rheological properties of commercial-grade poly(lactic acids)s Journal of Polymers and the Environment 8 2000 1 9 (Pubitemid 34045965)
18. A.M. Gajria, V. Davé, R.A. Gross, and S.P. McCarthy Miscibility and biodegradability of blends of poly(lactic acid) and poly(vinyl acetate) Polymer 37 1996 437 444 (Pubitemid 126401901)
19. J.A. Garde, R. Catala, R. Gavara, and R.J. Hernandez Characterizing the migration of antioxidants from polypropylene into fatty food simulants Food Additives and Contaminants 18 8 2001 750 762 (Pubitemid 32677952)
20. S. Gemili, A. Yemenicioglu, and S.A. Altinkaya Development of antioxidant food packaging materials with controlled release properties Journal of Food Engineering 96 2010 325 332
21. S.C. George, and S. Thomas Transport phenomena through polymeric systems Progress in Polymer Science (Oxford) 26 6 2001 985 1017 (Pubitemid 32719899)
22. P.A. Gerin, P.B. Dengis, and P.G. Rouxhet Performance of XPS analysis of model biochemical compounds Journal of Chemical Physics 92 1995 1043 1065
23. D. Granda-Restrepo, E. Peralta, R. Troncoso-Rojas, and H. Soto-Valdez Release of antioxidants from co-extruded active packaging developed for whole milk powder International Dairy Journal 19 2009 481 488
24. D.W. Grijpma, H. Altpeter, M.J. Bevis, and J. Feijen Improvement of the mechanical properties of poly(d,l-lactide) by orientation Polymer International 51 2002 845 851 (Pubitemid 35337588)
25. M. Harada, T. Ohya, K. Iida, H. Hayashi, K. Hirano, and H. Fukuda Increased impact strength of biodegradable poly(lactic acid)/poly(butylene succinate) blend composites by using isocyanate as a reactive processing agent Journal of Applied Polymer Science 106 3 2007 1813 1820 (Pubitemid 47518233)
26. A.M. Harris, and E.C. Lee Improving mechanical performance of injection molded PLA by controlling crystallinity Journal of Applied Polymer Science 107 2008 2246 2255 (Pubitemid 351204641)
27. O. Hartman, C. Zhang, E.L. Adams, M.C. Farah-Carson, N.J. Petrelli, and B.D. Chase Biofunctionalization of electrospun PCL-based scaffolds with perlecan domain IV peptide to create a 3-D pharmacokinetic cancer model Biomaterials 31 2010 5700 5718
28. M. Jamshidian, E.A. Tehrany, M. Imran, M. Jacquot, and S. Desobry Poly-lactic acid: Production, applications, nanocomposites, and release studies Comprehensive Reviews in Food Science and Food Safety 9 2010 552 571
29. W.Y. Jang, B.Y. Shin, T.J. Lee, and R. Narayan Thermal properties and morphology of biodegradable PLA/starch compatibilized blends Journal of Industrial Engineering Chemistry 13 2007 457 464
30. D.H. Jeon, G.Y. Park, I.S. Kwak, K.H. Lee, and H.J. Park Antioxidants and their migration into food simulants on irradiated LLDPE film Lebensmittel-Wissenschaft and Technologie - Food Science and Technology 40 2007 151 156 (Pubitemid 44118982)
31. B. Jeong, Y.K. Choi, Y.H. Bae, G. Zentner, and S.W. Kim New biodegradable polymers for injectable drug delivery systems Journal of Controlled Release 62 1999 109 114 (Pubitemid 29486489)
32. F. Jing, and M.A. Hillmyer A bifunctional monomer derived from lactide for toughening polylactide Journal of the American Oil Chemists' Society 130 2008 13826 13827
33. Y. Kikkawa, M. Fujita, H. Abe, and Y. Doi Effect of water on the surface molecular mobility of poly(lactide) thin film: An atomic force microscopy study Biomacromolecules 5 4 2004 1187 1193 (Pubitemid 39089716)
34. E. Kiss, I. Bertóti, and E.I. Vargha-Butler XPS and wettability characterization of modified poly(lactic acid) and poly(lactic/glycolic acid) films Journal of Colloid and Interface Science 245 1 2002 91 98 (Pubitemid 34953371)
35. J. Kylmä, M. Härkönen, and J.V. Seppälä The modification of lactic acid based poly(ester-urethane) by copolymerization Journal of Applied Polymer Science 63 1997 1865 1872 (Pubitemid 127557418)
36. L.V. Labrecque, R.A. Kumar, V. Davé, R.A. Gross, and S.P. McCarthy Citrate esters as plasticizers for poly(lactic acid) Journal of Applied Polymer Science 66 1997 1507 1513 (Pubitemid 127626740)
37. B.H. Li, and M.C. Yang Improvement of thermal and mechanical properties of poly(l-lactic acid) with 4,4-methylene diphenyl diisocyanate Polymers for Advanced Technologies 17 2006 439 443
38. H. Li, and M.A. Huneault Effect of nucleation and plasticization on the crystallization of poly(lactic acid) Polymer 48 2007 6855 6866 (Pubitemid 47615074)
39. H. Li, W. Nie, C. Deng, X. Chen, and X. Ji Crystalline morphology of poly (l.lactic acid) thin films European Polymer Journal 45 2009 123 130
40. Y. Li, and H. Shimizu Improvement in toughness of poly(l-lactide) (PLLA) through reactive blending with acrylonitrile-butadiene-styrene copolymer (ABS): Morphology and properties European Polymer Journal 45 2009 738 746
41. X. Ling, and J.E. Spruiell Analysis of the complex thermal behavior of poly(l-lactic acid) film. II. Samples crystallized from the melt Journal of Polymer Science, Part B: Polymer Physics 44 23 2006 3378 3391 (Pubitemid 44846465)
42. R.Y.F. Liu, Y.S. Hu, D.A. Schiraldi, A. Hiltner, and E. Baer Crystallinity and oxygen transport properties of PET bottle walls Journal of Applied Polymer Science 94 2 2004 671 677 (Pubitemid 39253073)
43. N. Ljungberg, and B. Wesslén The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid) Journal of Applied Polymer Science 86 5 2002 1227 1234 (Pubitemid 35011732)
44. N. Ljungberg, D. Colombini, and B. Wessleén Plasticization of poly(lactic acid) with oligomeric malonate esteramides: Dynamic mechanical and thermal film properties Journal of Applied Polymer Science 96 2005 992 1002 (Pubitemid 40566878)
45. A. Lopez-Rubio, and J.M. Lagaron Improved incorporation and stabilisation of β-carotene in hydrocolloids using glycerol Food Chemistry 125 3 2011 997 1004
46. M. Lundback, M.S. Hedenqvist, A. Mattozzi, and U.W. Gedde Migration of phenolic antioxidants from linear and branched polyethylene Polymer Degradation and Stability 91 2006 1571 1580
47. M.C. Michalski, S. Desobry, and J. Hardy Adhesion of edible oils and food emulsions to rough surfaces Lebensmittel-Wissenschaft and Technologie - Food Science and Technology 31 1998 495 502 (Pubitemid 128350169)
48. A.J. Nijenhuis, E. Colstee, D.W. Grijpma, and A.J. Pennings High molecular weight poly(l-lactide) and poly(ethylene oxide) blends: Thermal characterization and physical properties Polymer 37 1996 5849 5857 (Pubitemid 126396672)
49. D. Quan, K. Liao, and J. Zhao Effects of physical aging on glass transition behavior of poly(lactic acid)s Acta Polymerica Sinica 5 2004 726 730 (Pubitemid 40348857)
50. J.W. Rhim, A.K. Mohanty, S.P. Singh, and P.K.W. Ng Effect of the processing methods on the performance of polylactide films: Thermocompression versus solvent casting Journal of Applied Polymer Science 101 2006 3736 3742 (Pubitemid 44327888)
51. M.D. Sanchez-Garcia, E. Gimenez, and J.M. Lagaron Novel PET nanocomposites of interest in food packaging applications and comparative barrier performance with biopolyester nanocomposites Journal of Plastic Film and Sheeting 23 2 2007 133 148 (Pubitemid 350011254)
52. M.D. Sanchez-Garcia, E. Gimenez, and J.M. Lagaron Morphology and barrier properties of solvent cast composites of thermoplastic biopolymers and purified cellulose fibers Carbohydrate Polymers 71 2008 235 244 (Pubitemid 350110348)
53. J.R. Sarasua, E. Zuza, N. Imaz, and E. Meaurio Crystallinity and crystalline confinement of the amorphous phase in polylactides Macromolecular Symposia 272 1 2008 81 86
54. K.M. Schaich, N. Obinata, and K. Yam Delivering natural antioxidants via controlled release packaging Acta Horticulutrae 778 2008 53 64
55. C.D. Soto-Cantú, A.Z. Graciano-Verdugo, E. Peralta, A.R. Islas-Rubio, A. González-Córdova, and A. González- León Release of butylated hydroxytoluene from an active film packaging to asadero cheese and its effect on oxidation and odor stability Journal of Dairy Science 91 2008 11 19 (Pubitemid 351455813)
56. D.E. Till, D.J. Ehntholt, R.C. Reid, P.S. Schwartz, K.R. Sidman, and A.D. Schwope Migration of BHT antioxidant from high density polyethylene to foods and food simulants Industrial Engineering and Chemical, Product Research and Development 21 1982 106 113
57. M. Todo Effect of unidirectional drawing process on fracture behavior of poly(l-lactide) Journal of Materials Science 42 2007 1393 1396
58. H. Tsuji, R. Okino, H. Daimon, and K. Fujie Water vapor permeability of poly(lactide)s: Effects of molecular characteristics and crystallinity Journal of Applied Polymer Science 99 2006 2245 2252
59. M. Van Aardt, S.E. Duncan, J.E. Marcy, T.E. Long, S.F. O'Keefe, and S.R. Sims Release of antioxidants from poly(lactide-co-glycolide) films into dry milk products and food simulating liquids International Journal of Food Science and Technology 42 2007 1327 1337 (Pubitemid 47624041)
60. P.K.J.P.D. Wanasundara, and F. Shahidi Antioxidants: Science, technology, and applications 2005 John Wiley & Sons, Inc.
61. N. Wang, X. Zhang, J. Yu, and J. Fang Study of the properties of plasticised poly(lactic acid) with poly(1,3-butylene adipate) Polymer Composites 16 2008 597 604
62. C. Wessling, T. Nielsen, and A. Leufvén Influence of α-tocopherol concentration on the stability of linoleic acid and the properties of low-density polyethylene Packaging Technology and Science 13 2000 19 28 (Pubitemid 32085338)
63. C. Wessling, T. Nielsen, and J.R. Giacin Antioxidant ability of BHT- and α-tocopherol-impregnated LDPE film in packaging of oatmeal Journal of the Science of Food and Agriculture 81 2001 194 201 (Pubitemid 32097559)
64. C. Wessling, T. Nielsen, A. Leufvén, and M. Jagerstad Mobility of α-tocopherol and BHT in LDPE in contact with fatty food simulants Food Additives and Contaminants 15 1998 709 715 (Pubitemid 28421236)
65. C. Wessling, T. Nielsen, A. Leufvén, and M. Jagerstad Retention of α-tocopherol in low-density polyethylene (LDPE) and polypropylene (PP) in contact with foodstuffs and food-simulating liquids Journal of the Science of Food and Agriculture 79 1999 1635 1641 (Pubitemid 29429079)
66. G.H. Yew, A.M. Mohd Yusof, Z.A. Mohd Ishak, and U.S. Ishiaku Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites Polymer Degradation and Stability 90 3 2005 488 500 (Pubitemid 41376414)