Fit of screw-retained fixed implant frameworks fabricated by different methods: A systematic review

International Journal of Prosthodontics

Volumn 24, Issue 3, 2011, Pages 207-220

  Abduo, Jaafar ^a   Lyons, Karl ^b   Bennani, Vincent ^b   Waddell, Neil ^b   Swain, Michael ^b  

^a UNIVERSITY OF WESTERN AUSTRALIA   (Australia)

^b UNIVERSITY OF OTAGO   (New Zealand)

Author keywords

[No Author keywords available]

Indexed keywords

BONE SCREW; COMPUTER AIDED DESIGN; DENTURE; HUMAN; INSTRUMENTATION; PROSTHESIS; REVIEW; STATISTICAL MODEL; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

BONE SCREWS; COMPUTER-AIDED DESIGN; DENTAL ABUTMENTS; DENTAL CASTING TECHNIQUE; DENTAL IMPLANTS; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTURE DESIGN; DENTURE RETENTION; DENTURE, PARTIAL, REMOVABLE; HUMANS; MODELS, STATISTICAL; PROSTHESIS FITTING;

EID: 80052878672     PISSN: 08932174     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (49)

1. Brånemark PI. Osseointegration and its experimental background. J Prosthet Dent 1983;50:399-410.
2. Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res 2000;11(suppl 1):156-158.
3. Watanabe F, Uno I, Hata Y, Neuendorff G, Kirsch A. Analysis of stress distribution in a screw-retained implant prosthesis. Int J Oral Maxillofac Implants 2000;15:209-218.
4. Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: Current status. Implant Dent 2001; 10:85-92.
5. Karl M, Winter W, Taylor TD, Heckmann SM. In vitro study on passive fit in implant-supported 5-unit fixed partial dentures. Int J Oral Maxillofac Implants 2004;19:30-37.
6. Karl M, Rösch S, Graef F, Taylor TD, Heckmann SM. Strain situation after fixation of three-unit ceramic veneered implant superstructures. Implant Dent 2005;14:157-165.
7. Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Brånemark implants in edentulous jaws: A study of treatment from the time of prosthesis placement to the first annual checkup. Int J Oral Maxillofac Implants 1991;6:270-276.
8. Taylor TD. Prosthodontic problems and limitations associated with osseointegration. J Prosthet Dent 1998;79:74-78.
9. Clelland NL, Papazoglou E, Carr AB, Gilat A. Comparison of strains transferred to a bone simulant among implant overdenture bars with various levels of misfit. J Prosthodont 1995;4:243-250.
10. Bergkvist G, Sahlholm S, Karlsson U, Nilner K, Lindh C. Immediately loaded implants supporting fixed prostheses in the edentulous maxilla: A preliminary clinical and radiologic report. Int J Oral Maxillofac Implants 2005;20:399-405.
11. Zervas PJ, Papazoglou E, Beck FM, Carr AB. Distortion of three-unit implant frameworks during casting, soldering, and simulated porcelain firings. J Prosthodont 1999;8:171-179.
12. Sartori IA, Ribeiro RF, Francischone CE, de Mattos Mda G. In vitro comparative analysis of the fit of gold alloy or commercially pure titanium implant-supported prostheses before and after electroerosion. J Prosthet Dent 2004;92:132-138.
13. Castilio D, Pedreira AP, Rossetti PH, Rossetti LM, Bonachela WC. The influence of screw type, alloy and cylinder position on the marginal fit of implant frameworks before and after laser welding. J Appl Oral Sci 2006;14:77-81.
14. de Torres EM, Rodrigues RC, de Mattos Mda G, Ribeiro RF. The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks. J Dent 2007;35:800-805.
15. Tiossi R, Rodrigues RC, de Mattos Mda G, Ribeiro RF. Comparative analysis of the fit of 3-unit implant-supported frameworks cast in nickel-chromium and cobalt-chromium alloys and commercially pure titanium after casting, laser welding, and simulated porcelain firings. Int J Prosthodont 2008;21:121-123.
16. de Aguiar FA Jr, Tiossi R, Rodrigues RC, Mattos Mde G, Ribeiro RF. An alternative section method for casting and posterior laser welding of metallic frameworks for an implant-supported prosthesis. J Prosthodont 2009;18:230-234.
17. White GE. The construction of a mandibular fixed complete framework. In: White GE (ed). Osseointegrated Dental Technology. Chicago: Quintessence, 1993:103-129.
18. Romero GG, Engelmeier R, Powers JM, Canterbury AA. Accuracy of three corrective techniques for implant bar fabrication. J Prosthet Dent 2000;84:602-607.
19. Eisenmann E, Mokabberi A, Walter MH, Freesmeyer WB. Improving the fit of implant-supported superstructures using the spark erosion technique. Int J Oral Maxillofac Implants 2004; 19:810-818.
20. de Sousa SA, de Arruda Nobilo MA, Henriques GE, Mesquita MF. Passive fit of frameworks in titanium and palladium-silver alloy submitted the laser welding. J Oral Rehabil 2008;35:123-127.
21. Fischer J, Thoma A, Suter A, Lüthy H, Luder HU, Hämmerle CH. Misfit of suprastructures on implants processed by electrical discharge machining or the Cresco method. Quintessence Int 2009;40:515-522.
22. Jemt T. Three-dimensional distortion of gold alloy castings and welded titanium frameworks. Measurements of the precision of fit between completed implant prostheses and the master casts in routine edentulous situations. J Oral Rehabil 1995;22:557-564.
23. Riedy SJ, Lang BR, Lang BE. Fit of implant frameworks fabricated by different techniques. J Prosthet Dent 1997;78:596-604.
24. Jemt T, Bäck T, Petersson A. Precision of CNC-milled titanium frameworks for implant treatment in the edentulous jaw. Int J Prosthodont 1999;12:209-215.
25. Takahashi T, Gunne J. Fit of implant frameworks: An in vitro comparison between two fabrication techniques. J Prosthet Dent 2003;89:256-260.
26. Al-Fadda SA, Zarb GA, Finer Y. A comparison of the accuracy of fit of 2 methods for fabricating implant-prosthodontic frameworks. Int J Prosthodont 2007;20:125-131.
27. Hjalmarsson L, Örtorp A, Smedberg JI, Jemt T. Precision of fit to implants: A comparison of Cresco and Procera implant bridge frameworks. Clin Implant Dent Relat Res 2010;12:271-280.
28. Costa HM, Rodrigues RC, Mattos Mda G, Ribeiro RF. Evaluation of the adaptation interface of one-piece implant-supported superstructures obtained in Ni-Cr-Ti and Pd-Ag alloys. Braz Dent J 2003;14:197-202.
29. Koke U, Wolf A, Lenz P, Gilde H. In vitro investigation of marginal accuracy of implant-supported screw-retained partial dentures. J Oral Rehabil 2004;31:477-482.
30. Clelland NL, Carr AB, Gilat A. Comparison of strains transferred to a bone simulant between as-cast and postsoldered implant frameworks for a five-implant-supported fixed prosthesis. J Prosthodont 1996;5:193-200.
31. Ortorp A, Jemt T, Bäck T, Jälevik T. Comparisons of precision of fit between cast and CNC-milled titanium implant frameworks for the edentulous mandible. Int J Prosthodont 2003;16:194-200.
32. Clelland NL, van Putten MC. Comparison of strains produced in a bone simulant between conventional cast and resin-luted implant frameworks. Int J Oral Maxillofac Implants 1997;12:793-799.
33. Heckmann SM, Karl M, Wichmann MG, Winter W, Graef F, Taylor TD. Cement fixation and screw retention: Parameters of passive fit. An in vitro study of three-unit implant-supported fixed partial dentures. Clin Oral Implants Res 2004;15:466-473.
34. Karl M, Rosch S, Graef F, Taylor TD, Heckmann SM. Static implant loading caused by as-cast metal and ceramic-veneered superstructures. J Prosthet Dent 2005;93:324-330.
35. Michalakis KX, Hirayama H, Garefis PD. Cement-retained versus screw-retained implant restorations: A critical review. Int J Oral Maxillofac Implants 2003;18:719-728.
36. Wataha JC. Alloys for prosthodontic restorations. J Prosthet Dent 2002;87:351-363.
37. Carr AB, Brunski JB, Hurley E. Effects of fabrication, finishing, and polishing procedures on preload in prostheses using conventional "gold" and plastic cylinders. Int J Oral Maxillofac Implants 1996;11:589-598.
38. Kano SC, Binon P, Bonfante G, Curtis DA. Effect of casting procedures on screw loosening in UCLA-type abutments. J Prosthodont 2006;15:77-81.
39. Kelly JR, Rose TC. Nonprecious alloys for use in fixed prosthodontics:A literature review. J Prosthet Dent 1983;49:363-370.
40. Wang RR, Fenton A. Titanium for prosthodontic applications:A review of the literature. Quintessence Int 1996;27:401-408.
41. Parr GR, Gardner LK, Toth RW. Titanium: The mystery metal of implant dentistry. Dental materials aspects. J Prosthet Dent 1985;54:410-414.
42. Lautenschlager EP, Monaghan P. Titanium and titanium alloys as dental materials. Int Dent J 1993;43:245-253.
43. Könönen M, Rintanen J, Waltimo A, Kempainen P. Titanium framework removable partial denture used for patient allergic to other metals: A clinical report and literature review. J Prosthet Dent 1995;73:4-7.
44. Contreras EF, Henriques GE, Giolo SR, Nobilo MA. Fit of cast commercially pure titanium and Ti-6Al-4V alloy crowns before and after marginal refinement by electrical discharge machining. J Prosthet Dent 2002;88:467-472.
45. Rodrigues RC, Ribeiro RF, de Mattos Mda G, Bezzon OL. Comparative study of circumferential clasp retention force for titanium and cobalt-chromium removable partial dentures. J Prosthet Dent 2002;88:290-296.
46. Shigeto N, Yanagihara T, Murakami S, Hamada T. Corrosion properties of soldered joints. Part II: Corrosion pattern of dental solder and dental nickel-chromium alloy. J Prosthet Dent 1991; 66:607-610.
47. Wiskott HW, Macheret F, Bussy F, Belser UC. Mechanical and elemental characterization of solder joints and welds using a gold-palladium alloy. J Prosthet Dent 1997;77:607-616.
48. Toreskog S, Phillips RW, Schnell RL. Properties of die materials-A comparative study. J Prosthet Dent 1966;16:119-131.
49. Ortorp A, Jemt T. Early laser-welded titanium frameworks supported by implants in the edentulous mandible: A 15-year comparative follow-up study. Clin Implant Dent Relat Res 2009; 11:311-322.