Improving the fit of implant-supported superstructures using the spark erosion technique

International Journal of Oral and Maxillofacial Implants

Volumn 19, Issue 6, 2004, Pages 810-818

  Eisenmann, Eduard ^a,b   Mokabberi, Ali ^b   Walter, Michael H ^c   Freesmeyer, Wolfgang B ^a,b  

^a CHARITÉ UNIVERSITÄTSMEDIZIN BERLIN   (Germany)

^b Dresden University of Technology ^*  (Germany)

^c UNIVERSITY HOSPITAL CARL GUSTAV CARUS   (Germany)

Author keywords

Implant supported superstructures; Passive fit; Spark erosion technique

Indexed keywords

DENTAL ALLOY; GOLD ALLOY; RESIN; TITANIUM;

ACCURACY; ARTICLE; ELASTICITY; IMPLANT; MEASUREMENT; PHYSICAL MODEL; SCANNING ELECTRON MICROSCOPY; STATISTICAL SIGNIFICANCE; STRESS; TECHNIQUE; TOOTH IMPLANTATION; TORQUE;

EID: 11444256371     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (54)

1. Gunne J, Jemt T, Linden B. Implant treatment in partially edentulous patients: A report on prostheses after 3 years. Int J Prosthodont 1994;7:143-148.
2. Jemt T, Lekholm U. Measurements of bone and frame-work deformations induced by misfit of implant superstructures. A pilot study in rabbits. Clin Oral Implants Res 1998;9:272-280.
3. Lekholm U, van Steenberghe D, Herrmann I, et al. Osseointegrated implants in the treatment of partially edentulous jaws: A prospective 5-year multicenter study. Int J Oral Maxillofac Implants 1994;9:627-635.
4. Naert I, Quirynen M, van Steenberghe D, Darius P. A study of 589 consecutive implants supporting complete fixed prostheses. Part II: Prosthetic aspect. J Prosthet Dent 1992;68:949-956.
5. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent 1983;49:843-848.
6. Sones AD. Complications with osseointegrated implants. J Prosthet Dent 1989;62:581-585.
7. Zarb GA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: The Toronto study. Part III: Problems and complications encountered. J Prosthet Dent 1990;64:185-194.
8. Adell R, Lekholm U, Rockler B, Brånemark P-I. A 15-year study of osseointegrated implants in the treatment of edentulous jaw. Int J Oral Surg 1981;10:387-416.
9. Bauman GR, Mills M, Rapley JW, Hallmon WW. Plaque-induced inflammation around implants. Int J Oral Maxillofac Implants 1992;7:330-337.
10. Haanaes HR. Implants and infections with special reference to oral bacteria. J Clin Periodontol 1990;17:516-524.
11. Yanase RT, Binon PP, Jemt T, Gulbransen HJ, Parel S. How do you test a cast framework for a full-arch fixed implant-supported prosthesis? [current issues forum] Int J Oral Maxillofac Implants 1994;9:471-474.
12. Kallus T, Bessing C. Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. Int J Oral Maxillofac Implants 1994;9:169-178.
13. Carr AB, Gerard DA, Larsen PE. The response of bone in primates around unloaded dental implants supporting prostheses with different levels of fit. J Prosthet Dent 1996;76:500-509.
14. Hobo S, Ischida E, Gracia TL. Fully bone anchored prostheses. Laboratory procedures. In: Osseointegration and Occlusal Rehabilitation. Tokyo: Quintessence, 1989:153-186.
15. Isa ZM, Hobkirk JA. The effects of superstructure fit and loading individual implant units: Part I. The effects of tightening the gold screws and placement of a superstructure with varying degrees of fit. Eur J Prosthodont Restorative Dent 1995;3:247-253.
16. Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Brånemark implants in edentulous jaws: A study of treatment from the time of prosthesis placement to the first annual checkup. Int J Oral Maxillofac Implants 1991;6:270-276.
17. Jemt T. In vivo measurements of precision of fit involving implant-supported prostheses in the edentulous jaw. Int J Oral Maxillofac Implants 1996;11:151-158.
18. Kan JY, Rungcharassaeng K, Bohsali K, Goodacre CJ, Lang BR. Clinical methods for evaluating implant framework fit. J Prosthet Dent 1999;81:7-13.
19. Stumpel LJ III, Quon SJ. Adhesive abutment cylinder luting. J Prosthet Dent 1993;69:398-400.
20. Lechner S, Duckmanton N, Klineberg I. Prosthodontic procedures for implant reconstruction. 2. Post-surgical procedures. Aust Dent J 1992;37:427-432.
21. May KB, Edge MJ, Russell MM, Razzoog ME, Lang BR. The precision of fit at the implant prosthodontic interface. J Prosthet Dent 1997;77:497-502.
22. Millington ND, Leung T. Inaccurate fit of implant superstructures. Part 1: Stresses generated on the superstructure relative to the size of fit discrepancy. Int J Prosthodont 1995;8:511-516.
23. Tan KB, Rubenstein JE, Nicholls JI, Yuodelis RA. Three-dimensional analysis of the casting accuracy of one-piece, osseointegrated implant-retained prostheses. Int J Prosthodont 1993;6:346-363.
24. Ziebert GJ, Hurtado A, Glapa C, Schiffleger BE. Accuracy of one-piece castings, preceramic and postceramic soldering. J Prosthet Dent 1986;55:312-317.
25. Rübeling G. Metallikeramisch verblendeter Bruckenzahnersatz aus Titan mit passivem Sitz nach funkenerosiver Behandlung. Implantologie 1999;3:279-294.
26. Aparicio C. A new method for achieving passive fit of an interim restoration supported by Brånemark implants: A technical note. Int J Oral Maxillofac Implants 1995;10:614-618.
27. Henry PJ. An alternate method for the production of accurate casts and occlusal records in the osseointegrated implant rehabilitation. J Prosthet Dent 1987;58:694-697.
28. Witkowski S. Die Realisierung des spannungsfreien Sitzes bei implantatgetragenen Suprastrukturen. Implantologie 1993;1:69-81.
29. Fusayama T, Wakumoto S, Hosada H. Accuracy of fixed partial dentures made by various soldering technique and one-piece casting. J Prosthet Dent 1964;14:334-342.
30. White GE. Herstellung eines Gerusts für eine implantatgetragene Totalprothese im Unterkiefer. In: White GE (ed). Implantat-Zahntechnik. Berlin: Quintessenz, 1993:S114.
31. Rübeling G. Titanverarbeitung mittels Funkenerosion. In: Wirz F, Bischoff H. Titan in der Zahnmedizin. Berlin: Quintessenz, 1997:S231.
32. Wolf H. Spannungsoptik. Buch 2: Auflage. Berlin: Springer, 1976.
33. Klineberg IJ, Murray GM. Design of suprastructures for osseointegrated fixtures. Swed Dent J 1985;28(suppl):63-69.
34. Brånemark P-I. Osseointegration and its experimental background. J Prosthet Dent 1983;50:399-410.
35. Brunski J. Biomaterials and biomechanics in dental implant design. Int J Oral Maxillofac Implants 1988;3:85-97.
36. Brunski JB. The influence of force, motion and related quantities on the response of bone to implants. In: Fikgerald RF Jr (ed). Noncemented Total Hip Arthroplasty. New York: Raven, 1988:7-21.
37. Brunski JB. Forces on dental implants and interfacial stress transfer. In: Laney WR, Tolman DE (eds). Tissue Integration in Oral, Orthopedic and Maxillofacial Reconstruction. Chicago: Quintessence, 1992:108-124.
38. Frost HM. Some ABC's of skeletal pathophysiology. 5. Microdamage hysiology. Calcif Tissue Int 1991;49:229-231.
39. Roberts WE, Garetto LP, Katona TR. Principles of orthodontic biomechanics: Metabolic and mechanical control mechanisms. In: Carlson DS, Goldstein SA (eds). Bone Biodynamics in Orthodontic and Orthopedic Treatment [Proceedings of the Annual Symposium on Craniofacial Growth, 22-23 Feb 1991, Ann Arbor, Michigan]. Ann Arbor, MI: Center for Human Growth and Development, University of Michigan, 1991:189-225.
40. Roberts WE, Smith RK, Zilberman Y, Mozsary PG, Smith RS. Osseous adaption to continuous loading of rigid endosseous implants. Am J Orthod 1984;86:95-111.
41. Roberts WE, Helm FR, Marshal KJ, Gongloff RK. Rigid endosseous implants for orthodontic and orthopedic anchorage. Angle Orthod 1989;59:247-256.
42. Brånemark P-I, Zarb GA, Albrektsson T. Gewebeintegrierter Zahnersatz. Osseointegration in klinischer Zahnheilkunde. Berlin: Quintessenz, 1985:11-76.
43. Jörnéus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-359.
44. Smedberg J-I, Nilner K, Rangert B, Svensson SA, Glantz SA. On the influence of superstructure connection on implant preload: A methodological and clinical study. Clin Oral Implants Res 1996;7:55-63.
45. Waskewicz GA, Ostrowski JS, Parks VJ. Photoelastic analysis of stress distribution transmitted from a fixed prosthesis attached to osseointegrated implants. Int J Oral Maxillofac Implants 1994;9:405-411.
46. Jemt T, Back T, Petersson A. Precision of CNC-milled titanium frameworks for implant treatment in the edentulous jaw. Int J Prosthodont 1999;12:209-215.
47. Ziesche U. Spannungsfreiheit, die wir meinen: CRESCO Ti Präzisierungs-Verfahren. Das Internationale Zahntechnik Magazin 2002;6:312-314.
48. Nölken R. Procera Implantat Steg Ein neues Behandlungskonzept für die Versorgung eines zahnlosen Kiefers mit einer stegretinierten Galvano-Hybridprothese. Dent Implantol 2003;7:335-350.
49. Rinke S, Lucius J, Huls A. Vergleichende Untersuchungen zur Herstellung von Titanstegkonstruktionen. Z Zahnärztl Implantol 1995;11:38-44.
50. Eisenmann E, Rubeling G. Die monometallische, spannungsfreie Versorgung auf Implantaten. Quintessenz Zahntech 1997;23:1440-1452.
51. Geis-Gerstorfer J, Sauer K-U, Weber H. In vitro substance loss due to galvanic corrosion in Ti-implant/Ni-Cr supraconstruction systems. Int J Oral Maxillofac Implants 1989;4: 119-123.
52. Simonis A, Weber H. In-vivo-Korrosionsuntersuchungen an Gusslegierungen für Implantatsuprakonstruktionen. Z Zahnärztl Implantol 1989;5:95-100.
53. Weber II, Frank G, Diehl J, Geis-Gerstorfer J. Kombiniert festsitzend/herausnehmbarer Zahnersatz aus Nichtedelmetall. Zahnärztl Mitt 1988;78:1879-1884.
54. Windhagen H, Thorey F. Die funktioneile Reaktion des Knochens auf mechanische Reize. Z Zahnärztl Implantol 2000;16:139-145.