Cement-retained versus screw-retained implant restorations: A critical review

International Journal of Oral and Maxillofacial Implants

Volumn 18, Issue 5, 2003, Pages 719-728

  Michalakis, Konstantinos X ^a,b,c   Hirayama, Hiroshi ^a   Garefis, Pavlos D ^b  

^a TUFTS UNIVERSITY SCHOOL OF DENTAL MEDICINE   (United States)

^b ARISTOTLE UNIVERSITY OF THESSALONIKI   (Greece)

^c NONE   (Greece)

Author keywords

Dental cement; Dental implants; Dental screw; Denture retention; Implant retained dental prosthesis

Indexed keywords

BONE SCREW; CEMENTATION; COMPARATIVE STUDY; COST BENEFIT ANALYSIS; ESTHETICS; HUMAN; MATERIALS TESTING; REVIEW; SURFACE PROPERTY; TOOTH IMPLANTATION; TOOTH OCCLUSION; TOOTH PROSTHESIS; TREATMENT OUTCOME;

CEMENTATION; DENTAL CASTING TECHNIQUE; DENTAL CEMENTS; DENTAL IMPLANTS; DENTAL IMPRESSION TECHNIQUE; DENTAL OCCLUSION; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; ESTHETICS, DENTAL; HUMANS; SURFACE PROPERTIES; TREATMENT OUTCOME; WEIGHT-BEARING;

EID: 0142024931     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (122)

1. Brånemark P-I, Svensson B, van Steenberghe D. Ten-year survival rates of fixed prostheses on four or six implants ad modum Brånemark in full edentulism. Clin Oral Implants Res 1995;6:227-231.
2. Adell R. Clinical results of osseointegrated implants supporting fixed prostheses in edentulous jaws. In: Zarb GA (ed). Proceedings of Toronto Conference on Osseointegration in Clinical Dentistry. St Louis: Mosby, 1983:1-165.
3. Albrektsson T, Zarb GA, Worthington P, Eriksson A. The long-term efficacy of currently used implants: A review and proposed criteria of success. Int J Oral Maxillofac Implants 1986;1:11-25.
4. Adell R. Clinical results of osseointegrated implants supporting fixed prostheses in edentulous jaws. J Prosthet Dent 1983;50:251-254.
5. Singer A, Serfaty V. Cement-retained implant-supported fixed partial dentures: A 6-month to 3-year follow up. Int J Oral Maxillofac Implants 1996;11:645-649.
6. Preiskel HW, Tsolka P. Telescopic prostheses for implants. Int J Oral Maxillofac Implants 1998;13:352-357.
7. Lewis S, Beumer J, Hornburg W, Moy P. The "UCLA" abutment. Int J Oral Maxillofac Implants 1988;3:183-189.
8. Lewis S, Avera S, Engleman M, Beumer J. The restoration of improperly inclined osseointegrated implants. Int J Oral Maxillofac Implants 1989;4:147-152.
9. Anderson B, Ödman P, Linvall AM, Brånemark P-I. Cemented single crowns on osseointegrated implants after 5 years: Results from a perspective study on CeraOne. Int J Prosthodont 1998;212-218.
10. Kerstein RB, Castelucci F, Osorio J. Ideal gingival form with computer generated healing abutments. Compend Contin Educ Dent 2000;21:793-797.
11. Misch CE. Contemporary Implant Dentistry. St Louis: Mosby, 1993:664-665.
12. Rieder CE. Copings on tooth and implant abutments for superstructure prosthesis. Int J Periodontics Restorative Dent 1990;10:437-453.
13. Hebel KS, Gajjar RC. Cement-retained versus screw-retained implant restoration: Achieving optimal occlusion and esthetics in implant dentistry. J Prosthet Dent 1997;77:28-35.
14. Misch CE. Screw-retained versus cement-retained implant-supported prostheses. Pract Periodontics Aesthet Dent 1995;9:15-18.
15. Bidez MW, Misch CE. Force transfer in implant dentistry: Basic concepts and principles. J Oral Implantol 1992;18:264-274.
16. Guichet DL. Load transfer in screw- and cement-retained implant fixed partial denture design [abstract]. J Prosthet Dent 1994;72:631.
17. Chee W, Felton DA, Johnson PF, Sullivan DY. Cemented versus screw-retained implant prostheses: Which is better? [current issues forum] Int J Oral Maxillofac Implants 1999;14:137-141.
18. Zarb GA, Jansson TP. Prosthodontic procedures and laboratory procedures and protocol. In: Brånemark P-I, Zarb GA, Albrektsson T. Tissue-Integrated Prostheses. Chicago: Quintessence, 1985:241-282.
19. Hobo S, Ichida E, Garcia LT. Osseointegration and Occlusal Rehabilitation. Chicago: Quintessence, 1989:176-177.
20. Nicholls JI. The measurement of distortion: Theoretical considerations. J Prosthet Dent 1977;37:587-596.
21. Nicholls JI. The measurement of distortion: Mathematical considerations. J Prosthet Dent 1978;39:339-343.
22. Nicholls JI. The measurement of distortion: Concluding remarks. J Prosthet Dent 1980;43:218-223.
23. Daudi MF, Setchell DJ, Searson LJ. A laboratory investigation of the accuracy of two impression techniques for single-tooth implants. Int J Prosthodont 2001;14:152-158.
24. Barrett MG, de Rijk WG, Burgess JO. The accuracy of six impression techniques for osseointegrated implants. J Prosthodont 1993;2:75-82.
25. Carr AB. A comparison of impression techniques for a five implant mandibular model. Int J Oral Maxillofac Implants 1991;6:448-455.
26. Assif D, Marshak B, Schmidt A. Accuracy of implant impression techniques. Int J Oral Maxillofac Implants 1996;11:216-222.
27. Phillips KM, Nicholls JI, Ma T, Rubenstein J. The accuracy of three implant impression techniques: A three dimensional analysis. Int J Oral Maxillofac Implants 1994;9:533-540.
28. Binon PP. Implants and components: Entering the new millennium. Int J Oral Maxillofac Implants 2000;15:76-94.
29. Phillips RW. Skinner's Science of Dental Materials. Philadelphia: Saunders, 1991:86-87.
30. O'Brien WJ. Dental Materials and Their Selection. Chicago: Quintessence, 1997:147-150.
31. Craig RG. Restorative Dental Materials, ed 10. St Louis: Mosby, 1997:438-439.
32. Bridger DV, Nicholls JI. Distortion of ceramometal fixed partial dentures during the firing cycle. J Prosthet Dent 1981;45:507-514.
33. McDowel JA, Regli CP. A quantitative analysis of the decrease in width of the mandibular arch during forced movements of the mandible. J Dent Res 1961;40:1183-1185.
34. Osborne J, Tomlin HR. Medial convergence of the mandible. Br Dent J 1964;117:112-114.
35. Burch JG, Borchers G. Method for study of mandibular arch width change. J Dent Res 1970;49:463.
36. Goodkind RJ, Heringlake CB. Mandibular flexure in opening and closing movements. J Prosthet Dent 1973;30:134-138.
37. De Marco TJ, Paine S. Mandibular dimensional change. J Prosthet Dent 1974;31:482-485.
38. Fischman BM. The influence of fixed splints on mandibular flexure. J Prosthet Dent 1976;35:643-647.
39. Grant AA. Some aspects of mandibular movement: Acceleration and horizontal distortion. Ann Acad Med Singapore 1986;15:305-310.
40. Hobkirk JA, Schwab J. Mandibular deformation in subjects with osseointegrated implants. Int J Oral Maxillofac Implants 1991;6:319-328.
41. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent 1983;49:843-848.
42. Carr AB, Gerard DA, Larsen PE. The response of bone in primates around unloaded dental implants supporting prostheses with different levels of fit. J Prosthet Dent 1996;76:500-509.
43. Michaels GC, Carr AB, Larsen PE. Effect of prosthetic superstructure accuracy on the osseointegrated implant-bone interface. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 1997;83:198-205.
44. Hulterstrom M, Nilsson U. Cobalt-chromium as framework material in implant- supported fixed prostheses: A preliminary report. Int J Oral Maxillofac Implants 1991;6:475-480.
45. White GE. Osseointegrated Dental Technology. Chicago: Quintessence, 1993:95-129.
46. Rubenstein JE. Stereo laser-welded titanium implant frameworks: Clinical and laboratory procedures with a summary of 10-year clinical trials. J Prosthet Dent 1995;74:284-293.
47. Jemt T, Book K. Prosthetic misfit and marginal bone loss in edentulous implant patients. Int J Oral Maxillofac Implants 1996;11:620-625.
48. Ness EM, Nicholls JI, Rubenstein JE, Smith DE. Accuracy of the acrylic resin pattern for the implant-retained prosthesis. Int J Prosthodont 1992;5:542-549.
49. Jemt T. Three-dimensional distortion of gold alloy castings and welded titanium frameworks: Measurement of precision of fit between completed implant prostheses and the master cast in routine situations. J Oral Rehabil 1995;22:557-564.
50. Jemt T, Rubenstein JE, Carlsson L, Lang BR. Measuring fit at the implant prosthodontic interface. J Prosthet Dent 1996;75:314-324.
51. Van Roekel NB. Electric discharge machining in dentistry. Int J Prosthodont 1992;5:114-121.
52. Schmitt SM, Chance DA. Fabrication of titanium implant-retained restorations with non-traditional machining techniques. Int J Prosthodont 1995;8:332-336.
53. LaBarge KW. Electrical discharge machining. J Dent Technol 1997;14:19-22.
54. Linehan AD, Windeler PS. Passive fit of implant retained prosthetic framework by electric discharge machining. J Prosthodont 1994;3:88-95.
55. Klineberg IJ, Murray GM. Design of framework for osseointegrated fixtures. Swed Dent J 1985;28:63-69.
56. Waskewitz CA, Ostrowski JS, Parks VJ. Photoelastic analysis of stress distribution transmitted from a fixed prosthesis attached to osseointegrated implants. Int J Oral Maxillofac Implants 1994;9:405-411.
57. Uludamar A, Leung T. Inaccurate fit of implant superstructures. Part II: Efficacy of the Preci-Disc system for the correction of errors. Int J Prosthodont 1996;9:16-20.
58. Voitik AJ. The Kulzer abutment luting: KAL technique. A direct assembly framework method for osseointegrated implant prostheses. Implant Soc 1991;2:11-14.
59. Aparicio C. A new method to routinely achieve passive fit of an interim restoration supported by Brånemark implants: A technical note. Int J Oral Maxillofac Implants 1995;10:614-618.
60. Olive J, Aparicio C. The Periotest method as a measure of osseointegrated oral implant stability. Int J Oral Maxillofac Implants 1990;5:390-400.
61. Wee AG, Aquilino SA, Schneider RL. Strategies to achieve fit in implant prosthodontics: A review of the literature. Int J Prosthodont 1999;12:167-178.
62. Duyck J, Naert I. Influence of prosthesis fit and the effect of a luting system on the prosthetic connection preload: An in vivo study. Int J Prosthodont 2002;15:389-396.
63. Bergendal B, Palmqvist S. Laser-welded titanium frameworks for fixed prostheses supported by osseointegrated implants: A two-year multicenter study report. Int J Oral Maxillofac Implants 1995;10:199-206.
64. Tan KB. The clinical significance of distortion in implant prosthodontics: Is there such a thing as a passive fit? Ann Acad Med 1995;24:138-157.
65. Jemt T, Lekholm U, Johansson CB. Bone response to implant-supported frameworks with differing degrees of misfit preload: In vivo study in rabbits. Clin Implant Dent Rel Res 2000;2:129-137.
66. Taylor TD, Agar JR, Vogiatzi T. Implant prosthodontics: Current perspective and future directions. Int J Oral Maxillofac Implants 2000;15:66-75.
67. Randi AP, Hsu AT, Verga A, Kim JJ. Dimensional accuracy and retentive strength of a retrievable cement-retained implant supported prosthesis. Int J Oral Maxillofac Implants 2001;16:547-556.
68. Guichet DL, Caputo AA, Choi H, Sorensen JA. Passivity of fit and marginal opening in screw- or cement-retained implant fixed partial denture designs. Int J Oral Maxillofac Implants 2000;15:239-246.
69. Keith SE, Miller BH, Woody RD, Higginbottom FL. Marginal discrepancy of screw-retained and cemented metal ceramic crowns on implant abutments. Int J Oral Maxillofac Implants 1999;14:369-378.
70. Chiche GJ, Pinault A. Considerations for fabrication of implant-supported posterior restorations. Int J Prosthodont 1991;4:37-44.
71. Keller W, Brägger U, Mombelli A. Peri-implant microflora of implants with cemented and screw-retained superstructures. Clin Oral Impl Res 1998;9:209-217.
72. Quirynen M, van Steenberghe D. Bacterial colonization of the internal part of two-stage implants. Clin Oral Implants Res 1993;4:158-161.
73. Naert I, Quirynen M, van Steenberghe D, Darius P. A study of 589 consecutive implants supporting complete fixed prostheses. Part II: Prosthetic aspects. J Prosthet Dent 1992;68:949-956.
74. Kallus T, Bessing C. Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. Int J Oral Maxillofac Implants 1994;9:169-178.
75. Hemmings KW, Schmitt A, Zarb GA. Complications and maintenance requirements for fixed prostheses and overdentures in the edentulous mandible: A 5-year report. Int J Oral Maxillofac Implants 1994;9:191-196.
76. Naert I, Quirynen M, van Steenberghe D, Darius P. A six-year prosthodontic study of 509 consecutively inserted implants for the treatment of partial edentulism. J Prosthet Dent 1992;67:236-245.
77. Gunne J, Jemt T, Linden B. Implant treatment in partially edentulous patients: A report on prostheses after 3 years. Int J Prosthodont 1994;7:143-148.
78. Jemt T, Linden B, Lekholm U. Failure and complications in 127 consecutively placed fixed partial prostheses supported by Brånemark implants: From prosthetic treatment to first annual check up. Int J Oral Maxillofac Implants 1992;7:40-44.
79. Zarb GA, Smith A. The longitudinal clinical effectiveness of osseointegrated dental implants: The Toronto study. Part III: Problems and complications encountered. J Prosthet Dent 1990;64:185-194.
80. Zarb GA, Schmitt A. The edentulous predicament: A prospective study of the effectiveness of implant-supported fixed prostheses. J Am Dent Assoc 1996;127:59-65.
81. Allen PF, McMillan AS, Smith DG. Complications and maintenance requirements of implant-supported prostheses provided in a UK dental hospital. Br Dent J 1997;182:298-302.
82. Albrektsson T. A multicenter report on osseointegrated oral implants. J Prosthet Dent 1988;60:75-84.
83. Lekholm U, van Steenberghe D, Herrmann I, et al. Osseointegrated implants in the treatment of partially edentulous jaws: A prospective 5-year multicenter study. Int J Oral Maxillofac Implants 1994;9:627-635.
84. Adell R, Lekholm U, Rockier B, Brånemark P-I. A 15-year study of osseointegrated implants in the treatment of edentulous jaws. Int J Oral Surg 1981;10:387-416.
85. Pylant T, Triplett RG, Key MC, Brunsvold MA. A retrospective evaluation of endosseous titanium implants in partially edentulous patients. Int J Oral Maxillofac Implants 1992;7:195-202.
86. Tolman DE, Laney WR. Tissue-integrated dental prosthesis: The first 78 months of experience at the Mayo Clinic. Mayo Clin Proc 1993;68:323-331.
87. Gunne J, Jemt T, Linden B. Implant treatment in partially edentulous patients: A report on prostheses after 3 years. Int J Prosthodont 1994;7:143-148.
88. Quirynen M, Naert I, van Steenberghe D, De Keyser C, Callens A. Periodontal aspects of osseointegrated fixtures supporting a partial bridge. An up-to-6-years retrospective study. J Clin Periodontol 1992;19:118-126.
89. Wilson AH Jr, Chan DC. The relationship between convergence and retention of extracoronal retainers. J Prosthodont 1994;3:74-78.
90. Nordlander J, Weir D, Stoffer W, Ochi S. The taper of clinical preparations for fixed prosthodontics. J Prosthet Dent 1988;60:148-151.
91. Reisbick MH, Shillingburg HT. Effect of preparation geometry on retention and resistance of cast gold restorations. Calif Dent Assoc J 1975;3:51-59.
92. Potts RG, Shillingburg HT Jr, Duncanson MG Jr. Retention and resistance of preparartions for cast restorations. J Prosthet Dent 1980;43:303-308.
93. Jorgensen KD. The relationship between retention and convergence angle in cemented veneer crowns. Acta Odontol Scand 1955;13:35-40.
94. Eames WB, O'Neal SJ, Monteiro J, Miller C, Roan JD, Cohen KS. Techniques to improve the seating of castings. J Am Dent Assoc 1978;96:432-437.
95. Kaufman EG, Coelho AB, Colin L. Factors influencing the retention of cemented gold castings. J Prosthet Dent 1961;11:487-502.
96. Smith BG. The effect of the surface roughness of prepared dentin on the retention of castings. J Prosthet Dent 1970;23:187-198.
97. Felton DA, Kanoy E, White J. The effect of surface roughness of crown preparations on retention of cemented castings. J Prosthet Dent 1987;58:292-296.
98. Kent DK, Koka S, Froeschle ML. Retention of cemented implant-supported restorations. J Prosthodont 1997;6:193-196.
99. Covey DA, Kent DK, St Germain HA Jr, Koka S. Effect of abutment size and luting cement type on the uniaxial retention force of implant supported crowns. J Prosthet Dent 2000;83:344-348.
100. Squier RS, Agar JR, Duncan JP, Taylor TD. Retentiveness of dental cements used with metallic implant components. Int J Oral Maxillofac Implants 2001;16:793-798.
101. Breeding LC, Dixon DL, Bogacki MT, Tietge JD. Use of luting agents with an implant system: Part 1. J Prosthet Dent 1992;68:737-741.
102. Zarb GA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: The Toronto study. Part I: Surgical results. J Prosthet Dent 1990;63:451-457.
103. Adell R, Eriksson B, Lekholm U, Brånemark P-I, Jemt T. Long term follow up study of osseointegrated implants in the treatment of edentulous jaws. Int J Oral Maxillofac Implants 1990;5:347-359.
104. Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 1992;7:26-34.
105. McGlumphy EA, Mendel DA, Holloway JA. Implant screw mechanics. Dent Clin North Am 1998;42:71-89.
106. Smedberg JI, Nilner K, Rangert B, Svensson SA, Glantz P-O. On the influence of superstructure connection on implant preload: A methodological and clinical study. Clin Oral Implant Res 1996;7:55-63.
107. Binon PP, McHugh MJ. The effect of eliminating implant/abutment rotational misfit on screw joint stability. Int J Prosthodont 1996;9:511-519.
108. Duyck J, Van Oosterwyck H, De Cooman M, Vander Sloten J, Puers R, Naert I. Preload on oral implants after screw tightening fixed full prostheses: An in vivo study. J Oral Rehab 2001;28:226-233.
109. Burguete RL, Johns RB, King T, Patterson EA. Tightening characteristics for screw joints in osseointegrated dental implants. J Prosthet Dent 1994;71:592-599.
110. Junival RC. Fundamentals of Machine Component Design. New York: Wiley, 1983:200-206.
111. Wheeler RC. A Textbook of Dental Anatomy and Physiology, ed 4. Philadelphia: Saunders, 1965:185-283.
112. Kraus BS, Jordan RE, Abrams L. Dental Anatomy and Occlusion. Baltimore: Williams & Wilkins, 1969:61-110.
113. Okeson JP. Management of Temporomandibular Disorders and Occlusion, ed 2. St Louis: Mosby, 1989:59-86.
114. Ekfeldt A, Øilo G. Occlusal contact wear of prosthodontic materials. An in vivo study. Acta Odontol Scand 1988;46:159-169.
115. Waerhaug J. The effects of rough surfaces upon gingival tissues. J Dent Res 1956;35:323-325.
116. Pauletto N, Lahiffe BJ, Walton JN. Complications associated with excess cement around crowns on osseointegrated implants: A clinical report. Int J Oral Maxillofac Implants 1999;14;865-868.
117. Agar JR, Cameron SM, Hughbanks JC, Parker MH. Cement removal from restorations luted to titanium abutments with simulated subgingival margins. J Prosthet Dent 1997;78:43-47.
118. Quirynen M, Van der Mei HC, Bolen CM, et al. An in vivo study on the influence of the surface roughness of implants on the microbiology of supra and subgingival plaque. J Dent Res 1993;72:1304-1309.
119. Dmytryk JJ, Fox SC, Moriarty JD. The effects of scaling titanium implant surfaces with metal and plastic instruments on cell attachment. J Periodontol 1990;61:491-496.
120. Dixon DL, Breeding LC, Bogacki MI, Tietge JD. Use of luting agents with an implant system: Part II. J Prosthet Dent 1992;68:885-890.
121. Koka S, Ewoldsen NO, Dana CL. The effect of cementing agent and technique on the retention of a CeraOne gold cylinder. A pilot study. Implant Dent 1995;4:32-35.
122. Michalakis KX, Pissiotis AL, Hirayama H. Cement failure loads of 4 provisional luting agents used for the cementation of implant-supported fixed partial dentures. Int J Oral Maxillofac Implants 2000;15:545-549.