The influence of support properties and complexity on fracture strength and fracture mode of all-ceramic fixed dental prostheses

Acta Odontologica Scandinavica

Volumn 69, Issue 4, 2011, Pages 229-237

  Mahmood, Deyar Jallal Hadi ^a   Linderoth, Ewa H ^a   Vult Von Steyern, Per ^a  

^a MALMÖ UNIVERSITY   (Sweden)

Author keywords

All ceramic; dental porcelain; fixed dental prostheses; Y TZP; zirconia

Indexed keywords

ALLOY; ALUMINUM; BIOMEDICAL AND DENTAL MATERIALS; DURALAY; METHACRYLIC ACID METHYL ESTER; POLYMER; PROCERA; TITANIUM; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

ARTICLE; CEMENTATION; CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTURE; HEAT; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; TEMPERATURE; TOOTH PROSTHESIS; YOUNG MODULUS;

ALUMINUM; CEMENTATION; COMPUTER-AIDED DESIGN; DENTAL ABUTMENTS; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL VENEERS; DENTURE DESIGN; DENTURE, PARTIAL, FIXED; ELASTIC MODULUS; HOT TEMPERATURE; HUMANS; MATERIALS TESTING; METAL CERAMIC ALLOYS; METHYLMETHACRYLATES; POLYMERS; STRESS, MECHANICAL; TEMPERATURE; TITANIUM; YTTRIUM; ZIRCONIUM;

EID: 79959526917     PISSN: 00016357     EISSN: 15023850     Source Type: Journal    
DOI: 10.3109/00016357.2010.549508     Document Type: Article

References (46)

1. Fernandes CP, Glantz P-O, Nilner K. On the accuracy of some in-vitro models for mechanical studies of maxillary removable dentures. Dent Mater 2003;19:127-36.
2. Richerson DW. Design approaches in modern ceramic engi-neering. Boca Raton, FL: Taylor & Francis Group, LLC; 2006.
3. Zeng K, Odén A, Rowcliff D. Flexure tests on dental cera-mics. Int J Prosthodont 1996;9:434-9.
4. Ritter JE. Critique of test methods for lifetime predictions. Dent Mater 1995;11:147-55.
5. Zeng K, Odén A, Rowcliff D. Evaluation of properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont 1998;11:183-9. (Pubitemid 128504138)
6. Fischer H, Marx R. Fracture toughness of dental ceramics: comparison ofbending and indentation method. Dent Mater 2002; 18: 12-19. (Pubitemid 40072297)
7. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 1999;81:652-61.
8. Kelly JR. Perspectives on strength. Dent Mater 1995;11: 103-10.
9. Ovri JEO. A parametric study of the biaxial strength test for brittle materials. Mat Chem Phys 2000;66:1-5.
10. Vult von Steyern P, Ebbesson S, Holmgren J, Haag P, Nilner KM. Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermocycling. J Oral Rehabil 2006:33:682-9. (Pubitemid 44213875)
11. Bahat Z, Mahmood DJH, Vult von Steyern P. Fracture strength of three unit fixed partial denture cores (Y-TZP) with different connector dimension and design. Swed Dent J 2009;33:149-59.
12. Oh W, Anusavice KJ. Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures. J Prosth Dent 2002;5:536-42. (Pubitemid 40433950)
13. Vult von Steyern P, Kokubo Y, Nilner K. Use ofabutment teeth vs. dental implants to support all-ceramic fixed partial dentures: an in-vitro study of fracture strength. Swed Dent J 2005;29:53-60. (Pubitemid 40905568)
14. Vult von Steyern P, al-Ansari A, White K, Nilner K, Derand T. Fracture strength of In-Ceram all-ceramic bridges in relation to cervical shape and try-in procedure. Eur J Prosthodont Rest Dent 2000;8:153-8.
15. Filser F, Kocher P, Weibel F, Lüthy H, Schärer P, Gauckler LJ. Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM). Int J Comput Dent 2001;4:89-106.
16. Larsson C, Holm L, Lövgren N, Kokubo Y, Vult von Steyern P. Fracture strength of four-unit Y-TZP FPD cores designed with varying connector diameter. An in-vitro study. J Oral Rehabil 2007;34:702-9.
17. Lüthy H, Filser F, Loeffel H, Schumacher M, Gauckler LJ, Hammerle CHF. Strength and reliability of four-unit all-ceramic posterior bridges. Dent Mater 2005;21:930-7. (Pubitemid 41336635)
18. Sundh A, Molin M, Sjögren G. Fracture resistance ofyttrium oxide partially-stabilised zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 2005; 21:476-82. (Pubitemid 40467038)
19. Sundh A, Sjögren G. Fracture resistance of all-ceramic zirconia bridges with differing phase stabilisers and quality ofsintering. Dent Mater 2006;22:778-84.
20. Tinchert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate, alumina-, and zirconia-based three-unit fixed partial dentures: A laboratory study. Int J Prosthodont 2001;14: 231-8. (Pubitemid 33672458)
21. Chitmongkolsuk S, Heydeke G, Stappert C, Strub JR. Fracture strength of all-ceramic lithium disilicate and porcelain-fused-to-metal bridges for molar replacement after dynamic loading. Eur J Prosthodont Rest Dent 2002;10: 15-22.
22. Kheradmandan S, Koutayas S, Bernhard M, Strub JR. Fracture strength of four different types of anterior 3-unit bridges after thermo-mechanical fatigue in the dual-axis chewing simulator. Oral Rehabil 2001;28:361-9. (Pubitemid 33754627)
23. Koutayas SO, Kern M, Ferrarsesso F, Strub JR. Influence of framework design on fracture strength of mandibular anterior all-ceramic resin-bonded fixed partial dentures. Int J Prosthodont 2002;15:223-9.
24. Wöstmann B, Rehmann P, Trost D, Balkenhol MJ. Effect of different retraction and impression techniques on the marginal fit ofcrowns. J Dent 2008;36:508-12.
25. Goodacre CJ, Campagni WV, Aquilino SA. Tooth prepara-tions for complete crowns: An art form based on scientific principles. J Prosthet Dent 2001;85:363-76. (Pubitemid 33601352)
26. Kern M, Douglas WH, Strub JR, DeLong R. Fracture strength of all-porcelain, resin-bonded bridges after testing in an artificial oral environment. J Dent 1993;21: 117\21.
27. Potiket N, Chiche G, Finger IM. In-vitro fracture strength of teeth restored with different all-ceramic crown systems. J Prosthet Dent 2004;92:491-5. (Pubitemid 39446463)
28. Stappert CFJ, Dai M, Chitmongkolsuk S, Gerds T, Strub JR. Marginal adaptation of three-unit fixed partial dentures con-structed from pressed ceramic systems. Br Dent J 2004;196: 766-70. (Pubitemid 38938481)
29. Rosentritt M, Behr M, Gebhard R, Handel G. Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures. Dent Mater 2006;22: 176-82. (Pubitemid 43061316)
30. Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in-vitro and in-vivo: analysis and modelling. J Dent Res 1995;74:1253-8.
31. Esquivel-Upshaw JF, Anusavice KJ, Young H, Jones J, Gibbs C. Clinical performance of a lithium disilicate-based core ceramic for 3-unit posterior FDPs. Int J Prosthodont 2004;17:469-75. (Pubitemid 39118792)
32. Fischer H, Weber M, Marx R. Lifetime prediction of all-ceramic bridges by computational methods. J Dent Res 2003;82:238-42. (Pubitemid 41766050)
33. Kamposiora P, Papavasiliou G, Bayne SC, Felton DA. Stress concentration in all-ceramic posterior fixed partial dentures. Quintessence Int 1996;27:701-6. (Pubitemid 126699315)
34. Kern M, Fechtig T, Strub JR. Influence of water storage and thermal cycling on the fracture strength of all-porcelain resin-bonded fixed partial dentures. J Prosthet Dent 1994;71: 251-6.
35. Oh W, Götzen N, Anusavice KJ. Influence of connector design on fracture probability of ceramic fixed-partial dentures. J Dent Res 2002;81:623-7.
36. Olsson KG, Furst B, Andersson B, Carlsson GE. A long-term retrospective and clinical follow-up study of In-Ceram Alumina FDPs. Int J Prosthodont 2003;16:150-6. (Pubitemid 37162368)
37. Pospiech P, Rammelsberg P, Goldhofer G, Gernet W. All-ceramic resin-bonded bridges. A 3-dimensional finite-element analysis study. Eur J Oral Sci 1996;104:390-5. (Pubitemid 126782188)
38. Pospiech P, Rammelsberg P, Unsold F. A new design for all-ceramic resin-bonded fixed partial dentures. Quintessence Int 1996;27:753-8. (Pubitemid 126699346)
39. Vult von Steyern P, Jonsson O, Nilner K. Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FDPs. Int J Prosthodont 2001;14:379-84. (Pubitemid 33692675)
40. Vult von Steyern, Carlson P, Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zircon® technique. A 2-year clinical study. J Oral Rehabil 2005;32: 180-7. (Pubitemid 40353824)
41. 2 three-unit fixed partial dentures: comparison of failure load before and after exposure to a mastication simulator. J Oral Rehabil 2007;34:282-90.
42. Beuer F, Steff B, Naumann M, Sorensen JA. Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computer-aided design (CAD)/computer-aided manufacturing (CAM) fabricated framework materials. Eur J Oral Sci 2008;116:381-6.
43. Guazzato M, Quach L, Albakry M, Swain MV. Influence of surface and heat treatments on the flexural strength ofY-TZP dental ceramic. J Dent 2005;33:9-18. (Pubitemid 40093557)
44. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect ofsurface grinding and sandblasting on flexural strength and reliability ofY-TZP zirconia ceramic. Dent Mater 1999; 15:426-33. (Pubitemid 129586772)
45. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25. (Pubitemid 29002541)
46. Sorensen JA, Kang S-K, Torres TJ, Knode H. In-Ceram fixed partial dentures: Three-year clinical trial results. J Calif Dent Assoc 1998;26:207-14.