Marginal adaptation of three-unit fixed partial dentures constructed from pressed ceramic systems

British Dental Journal

Volumn 196, Issue 12, 2004, Pages 766-770

  Stappert, C F J ^a,b   Dai, M ^b   Chitmongkolsuk, S ^c   Gerds, T ^a   Strub, J R ^b  

^a Institute of Medical Biometry and Medical Informatics   (Germany)

^b UNIVERSITY OF FREIBURG   (Germany)

^c MAHIDOL UNIVERSITY   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

ACCURACY; ARTICLE; CEMENTATION; DENTURE; HUMAN; MASTICATION; TOOTH; TOOTH PROSTHESIS;

BICUSPID; CEMENTATION; CERAMICS; DENTAL ABUTMENTS; DENTAL PORCELAIN; DENTURE DESIGN; DENTURE RETENTION; DENTURE, PARTIAL, FIXED; HUMANS; LITHIUM COMPOUNDS; MARGINAL ADAPTATION (DENTISTRY); MOLAR; PROSTHESIS FITTING; RESIN CEMENTS;

EID: 3142695403     PISSN: 00070610     EISSN: None     Source Type: Journal    
DOI: 10.1038/sj.bdj.4811390     Document Type: Article

References (50)

1. Burke F J, Qualtrough A J, Wilson N H. A retrospective evaluation of a series of dentin-bonded ceramic crowns. Quintessence Int 1998; 29: 103-106.
2. Weaver J D, Johnson G H, Bales D J. Marginal adaptation of castable ceramic crowns. J Prosthet Dent 1991; 66: 747-753.
3. Sulaiman F, Chai J, Jameson L M, Wozniak W T. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. Int J Prosthodont 1997; 10: 478-484.
4. Beschnidt S M, Strub J R. Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehabil 1999; 26: 582-593.
5. Boening K W, Wolf B H, Schmidt A E, Kastner K, Walter M H. Clinical fit of Procera AllCeram crowns. J Prosthet Dent 2000; 84: 419-424.
6. Gardner F M. Margins of complete crowns - literature review. J Prosthet Dent 1982; 48: 396-400.
7. Lang N P, Kiel R A, Anderhalden K. Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins. J Clin Periodontol 1983; 10: 563-578.
8. Knoernschild K L, Campbell S D. Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures. J Prosthet Dent 2000; 84: 492-498.
9. Tuntiprawon M, Wilson P R. The effect of cement thickness on the fracture strength of all-ceramic crowns. Aust Dent J 1995; 40: 17-21.
10. Kappert H F, Altvater A. [Field study on the accuracy of fit and the marginal seal of In-Ceram crowns and bridges]. Dtsch Zahnarztl Z 1991; 46: 151-153.
11. May K B, Russell M M, Razzoog M E, Lang B R. Precision of fit: the Procera AllCeram crown. J Prosthet Dent 1998; 80: 394-404.
12. Sorensen J A, Kang S K, Torres T J, Knode H. In-Ceram fixed partial dentures: three-year clinical trials. J Calif Dent Assoc 1998; 26: 207-214.
13. Chitmongkolsuk S, Heydecke G, Stappert C F J, Strub J R. Fracture strength of all-ceramic lithium disilikate and porcelain-fused-to-metal bridges for molar replacement after dynamic loading. Eur J Prosthodont Restor Dent 2002; 10: 131-138.
14. Sorensen J A, Cruz M, Mito W T, Raffeiner O, Meredith H R, Foser H P: A clinical investigation on three-unit fixed partial dentures fabricated with lithium disilicate glass-ceramic. Pract Periodontics Aesthet Dent 1999; 11: 95-106.
15. Rinke S, Behi F, Huls A. Fitting accuracy of all-ceramic posterior crowns produced with three different systems. J Dent Res 2001; 80: Special issue (MDR Abstracts) abstract no 0997 p 651.
16. Andersson M, Oden A. A new all-ceramic crown: A densely-sintered, high-purity aluminua coping with porcelain. Acta Odontol Scand 1993; 51: 59-64.
17. Ödman P A, Andersson B. Procera AllCeram crowns followed for 5-10.5 years. Int J Prostodont 2001; 14: 504-509.
18. Tinschert J, Natt G, Mautsch W, Spiekermann H, Anusavice K J. Marginal fit of alumina- and zirconia-based fixed partial dentures produced by CAD/CAM system. Oper Dent 2001; 26: 367-374.
19. Sparrius O, Grossman E S. Marginal leakage of composite resin restorations in combination with dentinal and enamel bonding agents. J Prosthet Dent 1989; 61: 678-684.
20. Kern M, Strub J R, Lu X Y. Wear of composite resin veneering materials in a dual-axis chewing simulator. J Oral Rehabil 1999; 26: 372-378.
21. DeLong R, Douglas W H. An artificial oral environment for testing dental materials. IEEE Trans Biomed Eng 1991; 38: 339-345.
22. Sorensen J A. A standardized method for determination of crown margin fidelity. J Prosthet Dent 1990; 64: 18-24.
23. DeLong R, Sakaguchi R L, Douglas WH, Pintado M R. The wear of dental amalgam in an artificial mouth: a clinical correlation. Dent Mater 1985; 1: 238-242.
24. Sakaguchi R L, Douglas W H, DeLong R, Pintado M R. The wear of a posterior composite in an artificial mouth: a clinical correlation. Dent Mater 1986; 2: 235-240.
25. Bates J F, Stafford G D, Harrison A. Masticatory function - a review of the literature. III. Masticatory performance and efficiency. J Oral Rehabil 1976; 3: 57-67.
26. Kumagai H, Suzuki T, Hamada T, Sondang P, Fujitan M. Occlusal force distribution on the dental arch during various levels of clenching. J Oral Rehabil 1999; 26: 932-935.
27. Rinke S, Huls A, Jahn L. Marginal accuracy and fracture strength of conventional and copy-milled all-ceramic crowns. Int J Prosthodont 1995; 8: 303-310.
28. Groten M, Axmann D, Probster L, Weber H. Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. J Prosthet Dent 2000; 83: 40-49.
29. Davis D R. Comparison of fit of two types of all-ceramic crowns. J Prosthet Dent 1988; 59: 12-16.
30. Pera P, Gilodi S, Bass F, Carossa S. In vitro marginal adaptation of alumina porcelain ceramic crowns. J Prosthet Dent 1994; 72: 585-590.
31. Friedlander L D, Munoz C A, Goodacre C J, Doyle M G, Moore B K. The effect of tooth preparation design on the breaking strength of Dicor crowns: Part 1. Int J Prosthodont 1990; 3: 159-168.
32. Pröbster L. Compressive strength of two modern all-ceramic crowns. Int J Prosthodont 1992; 5: 409-414.
33. Kern M, Schaller H G, Strub J R. Marginal fit of restorations before and after cementation in vivo. Int J Prosthodont 1993; 6: 585-591.
34. Bieniek K W, Marx R. The mechanical loading capacity of new all-ceramic crown and bridge materials. Schweiz Monatsschr Zahnmed 1994; 104: 284-289.
35. Ferrari M, Mason P N, Poli L, Di Dente M. Marginal adaptation of crowns: a scanning electron microscopic investigation. Int J Periodont Rest Dent 1994; 14: 273-279.
36. Steinbrenner H, Eickholz P, Staehle H J. Zur Reproduzierbarkeit der qualitativen und quantitativen Randanalyse. Dtsch Zahnärztl Z 1995; 50: 920-923.
37. Molin M K, Karlsson S L, Kristiansen M S. Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater 1996; 12: 245-249.
38. Fransson B, Oilo G, Gjeitanger R. The fit of metal-ceramic crowns, a clinical study. Dent Mater 1985; 1: 197-199.
39. Karlsson S. The fit of Procera titanium crowns. An in vitro and clinical study. Acta Odontol Scand 1993; 51: 129-134.
40. Belser U C, MacEntee M I, Richter W A. Fit of three porcelain-fused-to- metal marginal designs in vivo: a scanning electron microscope study. J Prosthet Dent 1985; 5: 24-29.
41. Kawai K, Isenberg B P, Leinfelder K F. Effect of gap dimension on composite resin cement wear. Quintessence Int 1994; 25: 53-58.
42. Bayne S C, Taylor D F, Rekow E D, Wilder A D, Heymann H O. Confirmation of Leinfelder clinical wear standards. Dent Mater 1994; 10: 11-18.
43. Buchalla W, Attin T, Hellwig E. Brushing abrasion of luting cements under neutral and acidic conditions. Oper Dent 2000; 25: 482-487.
44. Yoshinari M, Derand T. Fracture strength of all-ceramic crowns. Int J Prosthodont 1994; 7: 329-338.
45. Hahn P, Schaller H, Hafner P, Hellwig E. Effect of different luting procedures on the seating of ceramic inlays. J Oral Rehabil 2000; 27: 1-8.
46. Alkumru H N, Wilson H J, Bor S. The fit of all-ceramic crowns cemented with different luting agents. J Marmara University Dental Faculty 1992; 1: 198.
47. Oilo G, Evje D. Film thickness of dental luting cements. Dent Mater 1986; 2: 85-289.
48. Staninec M, Giles W S, Saiku J M, Hattori M. Caries penetration and cement thickness of three luting agents. Int J Prosthodont 1988; 1: 259-263.
49. Eppenberger J, Marinello C P, Scherle W, Schärer P. Composite as an attachment cement? Initial clinical experiences in crown and bridge prosthetics. Schweiz Monatsschr Zahnheilk 1387; 97: 1237-1250.
50. Krejci I, Mueller E, Lutz F. Effects of thermocycling and occlusal force on adhesive composite crowns. J Dent Res 1994; 73: 1228-1232.