Fracture strength of four different types of anterior 3-unit bridges after thermo-mechanical fatigue in the dual-axis chewing simulator

Journal of Oral Rehabilitation

Volumn 28, Issue 4, 2001, Pages 361-369

  Kheradmandan, S ^a   Koutayas, S O ^a   Bernhard, M ^a   Strub, J R ^a  

^a UNIVERSITY OF FREIBURG   (Germany)

Author keywords

3 unit bridges; Chewing simulator; Fracture strength; Survival rate

Indexed keywords

ALLOY; ALUMINUM OXIDE; CELAY; GLASS CERAMICS; GOLD ALLOY; IN CERAM; IN-CERAM;

ARTICLE; CERAMICS; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTURE; ELECTROLYSIS; HUMAN; INCISOR; MASTICATION; MATERIALS TESTING; MAXILLA; METALLURGY; SURVIVAL; TOOTH PROSTHESIS;

ALUMINUM OXIDE; CERAMICS; DENTAL ABUTMENTS; DENTAL BONDING; DENTAL PORCELAIN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTURE DESIGN; DENTURE RETENTION; DENTURE, PARTIAL, FIXED; ELECTROLYSIS; GOLD ALLOYS; HUMANS; INCISOR; MASTICATION; MATERIALS TESTING; MAXILLA; METAL CERAMIC ALLOYS; METALLURGY; SURVIVAL ANALYSIS; TOOTH, ARTIFICIAL;

EID: 0035321760     PISSN: 0305182X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1365-2842.2001.00742.x     Document Type: Article

References (79)

1. ABBATE, M.F., TJAN, A.H. & FOX, W.M. (1989) Comparison of the marginal fit of various ceramic crown systems. Journal of Prosthetic Dentistry, 61, 527.
2. BALSHI, T.J. (1994) Candidates and requirements for single-tooth implant prostheses. International Journal of Periodontology and Restorative Dentistry, 14, 316.
3. BERG, C. & HAMMER, P. (1990) In-Ceram: Ungeahnter Fortschritt in der metallfreien Keramik. Dental Labor, 8, 1043.
4. CHOUNG, C.K., GARLAPO, D.A., BROWN, M.H. & SORENSEN, S.E. (1982) Procedure for a simplified collarless metal-ceramic restoration using gold powder. Journal of Prosthetic Dentistry, 47, 449.
5. CLAUS, H. (1990) Vita-In Ceram, ein neues Verfahren zur Herstellung oxidkermischer Gerüste für Kronen und Brücken. Quintessenz Zahntechnik, 16, 35.
6. CORNELL, D.F. (1995) Soft tissue-ceramic interface: true parameter for successful esthetics. Journal of Esthetic Dentistry, 2, 81.
7. CREUGERS, N.H., KAYSER, A.F., & VAN 'T. HOF, M.A. (1994) A meta-analysis of durability data on conventional fixed bridges. Community Dent Oral Epidemiol, 22, 448.
8. DE BOEVER, J.A., MCCALL, W.D., HOLDEN, S. & ASH, M.M. (1978) Functional occlusal forces: an investigation by telemetry. Journal of Prosthetic Dentistry, 40, 326.
9. DELONG, R. & DOUGLAS, W.H. (1983) Development of an artificial oral environment for testing of dental restoratives: bi-axial force and movement control. Journal of Dental Research, 62, 32.
10. DONG, J.K., LÜTHY, H., WOHLWEND, A. & SCHÄRER, P. (1992) Heat-pressed ceramics: technology and strength. International Journal of Prosthodontics, 5, 9.
11. EDGE, M.J. & MACCARONE, T. (1987) An alternate method for establishing porcelain margin. Journal of Prosthetic Dentistry, 57, 276.
12. EIDENBENZ, S. & SCHÄRER, P. (1994) Das Kopierschleifen keramischer Formkörper. Phillip Journal, 11, 91.
13. ERPENSTEIN, H. & KERSCHBAUM, T. (1995) Frakturanfälligkeit von glas- und galvano-keramischen Kronen. Deutsche Zahnärztliche Zeitschrift, 50, 668.
14. FRADEANI, M., AQUILANO, A. & BASSEIN, L. (1997) Longitudinal study of pressed glass-ceramic inlays for four and a half years. Journal of Prosthetic Dentistry, 78, 346.
15. GARDNER, F.M., TILLMAN-MCCOMBS, K.W., CASTON, M.L. & RUNYAN, D.A. (1997) In vitro failure load of metal-collar margins compared with porcelain facial margins of metalceramic crowns. Journal of Prosthetic Dentistry, 78, 1.
16. GILLINGS, B.R.D. & GRAHAM, C.H. (1973) Jaw movements in young adult men during chewing. Journal of Prosthetic Dentistry, 29, 616.
17. GOODACRE, C.J., VAN ROEKEL, N.B., DYKEMA, R.W. & ULLMAN, R.B. (1977) The collarless metal-ceramic crown. Journal of Prosthetic Dentistry, 38, 615.
18. GRÄF, W. (1960) Die thermische Belastung der Zähne beim Verzehr extrem heißer und kalter Speisen. Deutsche Zahnärztliche Zeitschrift, 15, 30.
19. HARRISON, L., HUFFMAN, T. & GOLDFOGEL, M. (1992) All-porcelain labial margin for ceramo-metal crowns. Journal of Esthetic Dentistry, 4, 154.
20. HÜLS, A., WENZEL, U. & KERL, S. (1996) Metallfreier Zahnersatz aus Infiltrations-keramik. Quintessenz Zahntechnik, 22, 565.
21. IMBERY, T.A. & ESHELMAN, E.G. (1996) Resin-bonded fixed partial dentures: a review of three decades of progress. Journal of the American Dental Association, 127, 1751.
22. KAPPERT, H.F. (1996) Dental materials: new ceramic systems. Transactions Academy of Dental Materials, 9, 180.
23. KAPPERT, H.F. & ALTVATER, A. (1991) Feldstudie über die Paßgenauigkeit und das Randschlußverhalten von In-Ceram-Kronen und -Brücken. Deutsche Zahnärztliche Zeitschrift, 46, 151.
24. KAPPERT, H.F. & KNODE, H. (1993) In-Ceram: testing a new ceramic material. Quintessence of Dental Technology, Yearbook, 87.
25. KAPPERT, H.F., KNODE, H. & SCHULTHEISS, R. (1991) Festigkeitsverhalten der In-Ceram Keramik bei mechanischer und Thermischer Wechsellast im Kunstspeichel. Deutsche Zahnärztliche Zeitschrift 1991, 46, 129.
26. KAPPERT, H.F., KNIPP, U. & WEHRSTEREIN, A. (1995) Festigkeit von Zirkonoxid-verstärkten Vollkeramikbrücken aus In-Ceram. Deutsche Zahnärztliche Zeitschrift, 50, 683.
27. KELLY, J.R. (1995) Perspectives on strength. Dental Materials, 11, 103.
28. KELLY, J.R., TESK, J.A. & SORENSEN, J.A. (1995) Failure of all-ceramic fixed partial dentures in-vitro and in-vivo: analysis and modeling. Journal of Dental Research, 74, 1253.
29. KERN, M., KNODE, H. & STRUB, J.R. (1991) The all-porcelain, resin-bonded bridge. Quintessence International, 22, 257.
30. KERN, M., DOUGLAS, W.H. & FECHTIG, T. et al. (1993) Fracture strength of all-porcelain, resin-bonded bridges after testing in an oral artificial environment. Journal of Dentistry, 21, 117.
31. KERN, M., STRUB, J.R. & LÜ, X.Y. (1999) Wear of composite resin veneering materials in a dual-axis chewing simulator. Journal of Oral Rehabilitation, 26, 372.
32. KERSCHBAUM, T., PASZYNA, C., KLAPP, S. & MEYER, G. (1991) Failure-time and risk analysis of fixed partial dentures. Deutsche Zahnärztliche Zeitschrift, 46, 20.
33. KILLIARIDIS, S., KJELLBERG, H., WENNEBERG, B. & ENGSTROM, C. (1993) The relationship between maximal force, bite force endurance, and facial morphology during growth. A cross-sectional study. Acta Odontol Scandinavic, 51, 323.
34. KLAUS, G. (1988) Galvanotechnik. Elektroformung; die Alternative zur Gußtechnik. Quintessenz Zahntechnik, 14, 556.
35. KREIJCI, I. & LUTZ, F. (1990) In-vitro-Testverfahren zur Evaluation dentaler Restaurationssysteme. 3. Korrelation mit in-vivo-Resultaten. Schweizer Monatsschrift für Zahnmedizin, 100, 1445.
36. KRIEG, G. & KLAUS, G. (1988) Klinische Aspekte und neue Anwendungsmöglichkeiten der Galvanotechnik. Quintessenz, 39, 2103.
37. KRIEG, G. (1995) Erste Langzeitergebnisse galvanokeramischer Kronen nach dem AGC-Verfahren. Eine 9-Jahres-Studie. Quintessenz, 46, 783.
38. LEHNER, C.R., MÄNNCHEN, R. & SCHÄRER, P. (1995) Variable reduced metal support for collarless metal ceramic crowns: a new model for strength evaluation. International Journal of Prosthodontics, 8, 337.
39. LEHNER, C.R., STUDER, S., BRODBECK, U. & SCHÄRER, P. (1997) Short-term results of IPS-Empress full-porcelain crowns. Journal of Prosthodontics, 6, 20.
40. LEHNER, C., STUDER, S. & SCHÄRER, P. (1998) Seven-year results of leucite-reinforced glass-ceramic crowns. Journal of Dental Research, 77, 802 (Abstract No. 1368).
41. MAGNE, P., MAGNE, M. & BELSER, U. (1994) Natural and restorative oral esthetics. Part III: fixed partial dentures. Journal of Esthetic Dentistry, 1, 15.
42. MCARTHUR, D.R. (1985) Determination of approximate size of maxillary anterior denture teeth when mandibular anterior teeth are present. Part III: relationship of maxillary to mandibular central incisor widths. Journal of Prosthetic Dentistry, 53, 540.
43. MCLEAN, J.W. (1991) The science and an of dental ceramics. Operative Dentistry, 16, 149.
44. MCLEAN, J.W. (1997) Development of esthetics in aluminous porcelain restorations. Journal of Esthetic Dentistry, 4, 208.
45. MENNE, R. (1989) Die Galvanobrücke in Verbindung mit der Angußtechnik. Quintessenz Zahntechnik, 15, 1057.
46. MICHALSKE, T.A. & FRIEMAN, S.W. (1983) A molecular mechanism for stress corrosion in vitreous silica. Journal of the American Ceramic Society, 66, 284.
47. MORENA, R., BEAUDRAU, G.M., LOCKWOOD, P.E., EVANS, A.L. & FAIRHURST, C.W. (1986) Fatigue of dental ceramics in a simulated oral environment. Journal of Dental Research, 65, 993.
48. MYERS, M.L., ERGLE, J.W., FAIRHURST, C.W. & RINGLE, R.D. (1994a) Fatigue characteristics of a high-strength porcelain. International Journal of Prosthodontics, 7, 253.
49. MYERS, M.L., ERGLE, J.W., FAIRHURST, C.W. & RINGLE, R.D. (1994b) Fatigue failure parameters of IPS-Empress porcelain. International Journal of Prosthodontics, 7, 549.
50. NEL, J.C., MARAIS, J.T. & VAN DER VYVER, P.J. (1995) The porcelain-veneered metal crown with a porcelain butt joint: treatment of choice in stress-bearing areas. Journal of Esthetic Dentistry, 7, 251.
51. OMAR, R. (1987) Scanning electron microscopy of the marginal fit of ceramo-metal restorations with facially butted porcelain margins. Journal of Prosthetic Dentistry, 58, 13.
52. PRINCE, J., DONOVAN, T.E. & PRESSWOOD, R.G. (1983) The all-porcelain labial margin for ceramo-metal restorations: a new concept. Journal of Prosthetic Dentistry, 50, 793.
53. PRÖBSTER, L. & DIEHL, J. (1992) Slip-casting alumina ceramics for crown and bridge restorations. Quintessence International, 23, 25.
54. PRÖBSTER, L. (1993) Survival rate of In-Ceram restorations. International Journal of Prosthodontics, 6, 259.
55. RINKE, S., HÜLS, A. & JAHN, L. (1995) Marginal accuracy and fracture strength of conventional and copy-milled all-ceramic crowns. International Journal of Prosthodontics, 8, 303.
56. RITTER, J.E. (1995) Critique of test methods for lifetime predictions. Dental Materials, 11, 147.
57. ROGERS, O.W. & ARMSTRONG, B.W. (1961) Electroforming a gold matrix for indirect inlays. Journal of Prosthetic Dentistry, 11, 959.
58. SCHNEIDER, D.V., LEVI, M.S. & MORI, D.F. (1976) Porcelain shoulder adaptation using direct refractory dies. Journal of Prosthetic Dentistry, 36, 583.
59. SETZ, J., DIEHL, J. & WEBER, H. (1989a) The marginal fit of cemented galvano-ceramic crowns. International Journal of Prosthodontics, 2, 61.
60. SETZ, J., SIMONIS, A. & DIEHL, J. (1989b) Klinische und zahntechnische Erfahrungen mit vollkeramischen Brücken. Dental Labor, 10, 1425.
61. SIMONIS, A., FREESMAYER, W.B., BENZING, U. & SETZ, J. (1989) Plaqueanlagerung an galvanokeramischen Kronen. Deutsche Zahnärztliche Zeitschrift, 44, 793.
62. SORENSEN, J.A., KANG, S.K., TORRES, T.J. & KNODE, H. (1998a) In-Ceram fixed partial dentures: three-year clinical trial results. Journal of California Dental Association, 26, 207.
63. SORENSEN, J.A., CHOI, C., FANUSCU, M.I. & MITO, W.T. (1998b) IPS Empress crown system: three-year clinical trial results. Journal of California Dental Association, 26, 130.
64. SORENSEN, J.A., CRUZ, M. & MITO, W.T. (1998c) Research evaluations of a lithium disilicate restorative system: IPS Empress®2. Signature, 5, 4.
65. SOZIO, B.R. (1977) The marginal aspect of the ceramo-metal restoration: the collarless ceramo-metal restoration. Dental Clinics of North America, 21, 787.
66. SPARRIUS, O. & GROSSMAN, E.S. (1989) Marginal leakage of composite resin restorations in combination with dentinal and enamel bonding agents. Journal of Prosthetic Dentistry, 61, 678.
67. STROPPE, M. (1990) Standortbestimmung 1990; galvanoplastisch hergestellte Gerüste. Dental Labor, 2, 201.
68. STUDER, S., PIETROBON, N. & WOHLWEND, A. (1994) Maxillary anterior single-tooth replacement: comparison of three treatment modalities. Practical Periodontics and Aesthetic Dentistry, 60, 51.
69. STUDER, S., NAEF, R. & SCHÄRER, P. (1997) Adjustment of localized alveolar ridge defects by soft tissue transplantation to improve mucogingival esthetics: a proposal for clinical classification and an evaluation of procedures. Quintessence International, 28, 785.
70. STUDER, S., LEHNER, C. & SCHÄRER, P. (1998) Seven-year results of leucite-reinforced glass-ceramic inlays and onlays. Journal of Dental Research, 77, 803 (Abstract No. 1375).
71. SULLIVAN, D.Y. & SHERWOOD, R.L. (1993) Considerations for successful single tooth implant restorations. Journal of Esthetic Dentistry, 5, 118.
72. TOOGOOD, G.D. & ARCHIBALD, J.F. (1978) Technique for establishing porcelain margins. Journal of Prosthetic Dentistry, 40, 464.
73. VRYONIS, P.A. (1979) A simplified approach to complete porcelain margin. Journal of Prosthetic Dentistry, 42, 592.
74. WANSERSKI, D.J., SOBCZAK, K.P., MANACO, J.G. & MCGIVNEY, G.P. (1986) An analysis of margin adaptation of all-porcelain facial margin ceramo-metal crowns. Journal of Prosthetic Dentistry, 56, 289.
75. WASSELL, R.W., MCCABE, J.F. & WALLS, A.W. (1994a) A two-body frictional wear test. Journal of Dental Research, 73, 1546.
76. WASSELL, R.W., MCCABE, J.F. & WALLS, A.W. (1994b) Wear characteristics in a two-body wear test. Dental Materials, 10, 269.
77. WISKOTT, H.W., NICHOLLS, J.I. & BELSER, U.S. (1995) Stress fatigue: basic principles and prosthodontic implications. International Journal of Prosthodontics, 8, 105.
78. WOHLWEND, A., STRUB, J.R. & SCHÄRER, P. (1989) Metal ceramic and all-porcelain restorations: current considerations. International Journal of Prosthodontics, 2, 13.
79. WOOD, M. & VAN THOMPSON, P. (1993) Resin-bonded prosthodontics. Dental Clinics of North America, 3, 445.