Finite element prediction of thermal stresses and deformations in layered manufacturing of metallic parts

Acta Mechanica

Volumn 183, Issue 1-2, 2006, Pages 61-79

  Mughal, M P ^b   Fawad, H ^b   Mufti, R ^a,b  

^a Ghulam Ishaq Khan Institute of Engineering Sciences and Technology ^*

^b THE UNIVERSITY OF AGRICULTURE   (Pakistan)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; DEFORMATION; FINITE ELEMENT METHOD; KINEMATICS; MATHEMATICAL MODELS; METALLIC COMPOUNDS; THERMAL STRESS;

HEAT SOURCE; INTERPASS COOLING; MATERIAL PROPERTIES; PLANE STRAIN STRUCTURAL MODEL;

LAYERED MANUFACTURING;

EID: 33744534194     PISSN: 00015970     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00707-006-0329-4     Document Type: Article

References (32)

1. Zhang, Y., Yiwei, P., Chen, Y., Male, A.: Automated system for welding based rapid prototyping. Mechatronics 12, 37-53 (2002).
2. Merz, R.: Shape deposition manufacturing. PhD. Diss. Vienna University of Technology, TU Wien 1994.
3. Spencer, J., Dickens, P., Wykes, C.: Rapid prototyping of metal parts by 3D welding. Inst. Mech. Engng. 212B, 175-181 (1998).
4. Prodan, T., Amon, C., Finger, S., Weiss, L: Shape deposition manufacturing for embedding electronics and building injection molding tools. Department of Mechanical Engineering, ICES, Carnegie Mellon University, Pittsburgh, Pennsylvania 1998.
5. Schmaltz, K., Leoni, N., Padmanabhan, P., Amon, C., Finger, S., Weiss, L.: Investigation of transport phenomena in microcasting shape deposition manufacturing via experiments designed using optimal sampling. Symp. on Manufacturing and Materials Processing, ASME-HTD 347, 241-250 (1997).
6. Jayanthi, S., Keefe, M., Gargiulo, E.: Studies in stereolithography: influence of process parameters on curl distortion in photopolymer models. Proc. Solid Freeform Fabrication Symp., pp. 250-258, Austin, Texas 1994.
7. Ullett, J., Chartoff, R., Lightman, A., Murphy, J., Li, J.: Reducing warpage in stereolithography through novel draw styles. Proc. Solid Freeform Fabrication Symp., pp. 242-249, Austin, Texas 1994.
8. Jacobs, P.: Rapid prototyping and manufacturing: fundamentals of stereolithography. SME 1996.
9. Karapatis, N., Guidoux, Y., Gygax, P., Glardon, R.: Thermal behavior of parts made by direct metal laser sintering. Proc. Solid Freeform Fabrication Symp. (Bourell, D. L., Beaman, J. J., Crawford, R. H., Marcus, H. L., Barlow, J. W., eds.), pp. 79-87, Austin, Texas 1998.
10. Dickens, P., Cobb, R., Gibson, I., Pridham, M.: Rapid prototyping using 3D welding. J. Design Manufacturing 1, 39-44 (1993).
11. Kalligarakis, K., Mellor: Double spiral overlay welding - an alternative to single and multilayer techniques. Welding Metal Fabrication 60, 277-280 (1992).
12. Mughal, M. P., Fawad, H., Mufti, R.: Numerical thermal analysis to study the effect of static contact angle on the cooling rate of molten metal droplet. Numerical Heat Transf. A 49(1), 95-107 (2006).
13. Mughal, M. P., Fawad, H., Mufti, R.: Parametric thermal analysis of molten metal droplet as applied to layered manufacturing. J. Heat Mass Transfer 42(3), 226-237 (2006).
14. Chin, R., Beuth, J., Amon, C.: Thermo mechanical modeling of molten metal droplet solidification as applied to layered manufacturing. Mech. Mater. 24, 257-271 (1996).
15. Chin, R., Beuth, J., Amon, C.: Successive deposition of metals in SFF processes, part 2: Thermo mechanical models of adjacent droplet. J. Manufacturing Sei. Engng. 123, 632-638 (2001).
16. Chin, R., Beuth, J., Amon, C.; Successive deposition of metals in SFF processes, part 1: Thermo mechanical models of layers and droplet columns. J. Manufacturing Sci. Engng. 123, 623-631 (2001).
17. Nickel, A.; Analysis of thermal stresses in shape deposition manufacturing of metal parts. Ph.D. Thesis, Stanford University 1999.
18. Nickel, A., Barnett, D., Prinz, F.: Thermal stresses and deposition patterns in layered manufacturing. Mat. Sci. Engng. A317, 59-64 (2001).
19. Klingbeil, N., Chin, R., Beuth, J., Amon, C.: measurement and modeling of residual stresses induced warping in direct metal deposition processes. Proc. Solid Freeform Fabrication Symp. (Bourell, D. L., Beaman, J. J., Crawford, R. H., Marcus, H. L., Barlow, J. W., eds.), pp. 367-374, Austin, Texas, August 1998.
20. Fawad, H., Mughal, M. P., Siddique, M.: Finite element simulation of welding based deposition process as applied to layered manufacturing: Thermal model. Int. Mechanical Engineering Conf. and Exhibition 2004 (IMECE2004), IMEC04-5062, pp. 656-673, 2004.
21. Goldak, J., Bibby, M., Moore, J., House, R., Patel, B.: Computer modeling of heat flow in welds. Metall Trans. B 15, 587-600 (1986).
22. Andersen, L. F.: Residual Stresses and deformations in steel structures. Ph.D. Thesis, Technical University of Denmark 2000.
23. Lindgren, L.: Finite element modeling and simulation of welding, part 1: Increased complexity. J. Thermal Stresses 24, 141-192 (2001).
24. Rosenthal, D.: The theory of moving source of heart and its application to metal transfer. Trans. ASME 43(11), 849-866 (1946).
25. Debiccari: Control of distortion and residual stresses in girth welded pipe, PhD. Thesis, Department of Mechanical Engineering, M.I.T 1986.
26. Kamala, V., Goldak, J. A.: Error due to two-dimensional approximation in heat transfer analysis of welds. Welding J. 72(9), 440s-446s (1993).
27. Goldak, J., Chakravarti, A., Bibby, M.: A new finite element model for heat sources. Metall. Trans. B 15, 299-305 (1984).
28. Abid, M., Siddique, M.; Finite-element simulation of tack welds in girth welding of a pipe-flange joint. Acta Mech. 178, 53-64 (2005).
29. Lindgren, L.: Finite element modeling and simulation of welding, part 2: Improved material modeling, J. Thermal Stresses 24, 195-231 (2001).
30. Holman, J.: Heat transfer, 6th international edn, pp. 55-57. Singapore: McGraw Hill 1986.
31. Masubuchi, K.: Analysis of welded structures. International Series on Materials Science and Technology, Vol. 33, 1st edn. New York: Pergamon Press 1980.
32. McDill, J. M. J., Oddy, A. S., Goldak, J. A.: Comparing 2-D plane strain and 3-D analyses of residual stresses in welds. Proc. of 3rd Int. Conf. on Trends in Welding Research, pp. 105-108, Gatlinburg, Tennessee 1992.