Rigid biodegradable photopolymer structures of high resolution using deep-UV laser photocuring

Journal of Micromechanics and Microengineering

Volumn 21, Issue 5, 2011, Pages

  Brandi, F ^a   Anjum, F ^a,b   Ceseracciu, L ^a   Barone, A C ^a   Athanassiou, A ^c,d  

^a ISTITUTO ITALIANO DI TECNOLOGIA   (Italy)

^b UNIVERSITY OF GENOA   (Italy)

^c UNIVERSITY OF SALENTO   (Italy)

^d CNR   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BONE FORMATION; CROSS-LINKABLE; CURING DEPTH; DEEP-UV; DEEP-UV LASERS; DIETHYL FUMARATE; ELECTROMAGNETIC SPECTRA; HIGH RESOLUTION; HIGH SPATIAL RESOLUTION; INCIDENT PULSE; LATERAL RESOLUTION; LINE SPACING; MICROSTEREOLITHOGRAPHY; OPTICAL RESOLUTION; PHOTO-INITIATOR; PHOTOCROSS-LINKING; PHOTOCURING; POLYPROPYLENE FUMARATE; SPATIAL DIMENSION; TISSUE DEVELOPMENT; TRANSVERSAL PLANES; VERTICAL DIRECTION; WEIGHT RATIOS; YOUNG'S MODULUS;

ABSORPTION SPECTROSCOPY; BIODEGRADABLE POLYMERS; COPYING; CURING; MICROMETERS; PROPYLENE; SCAFFOLDS (BIOLOGY); TISSUE; ULTRAVIOLET RADIATION;

PULSED LASERS;

EID: 79955876243     PISSN: 09601317     EISSN: 13616439     Source Type: Journal    
DOI: 10.1088/0960-1317/21/5/054007     Document Type: Article

References (37)

1. Melchels F, Feijen J and Grijpma D 2010 A review on stereolithography and its applications in biomedical engineering Biomaterials 31 6121-30
2. Kwon I K and Matsuda T 2005 Photo-polymerized microarchitectural constructs prepared by microstereolithography (μSL) using liquid acrylate-end capped trimethylene carbonate-based prepolymers Biomaterials 26 1675-84 (Pubitemid 39575310)
3. Farsari M, Claret-Tournier F, Huang S, Chatwin C R, Budgett D M, Birch P M, Young R C D and Richardson J D 2000 A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask J. Mater. Process. Technol. 107 167-72 (Pubitemid 32072600)
4. Bertsch A, Jiguet S and Renaud P 2004 Microfabrication of ceramic components by microstereolithography J. Micromech. Microeng. 14 197-203
5. Choi J W, Ha Y M, Choi K H and Lee S H 2007 Fabrication of 3-dimensional microstructures using dynamic image projection Key Eng. Mater. 39 473-8 (Pubitemid 46418101)
6. Choi J W, Ha Y M, Lee S H and Choi K H 2006 Design of microstereolithography system based on dynamic image projection for fabrication of three-dimensional microstructures J. Mech. Sci. Technol. 20 2094-104
7. Choi J W, Wicker R B, Cho S H, Ha C S and Lee S H 2009 Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography Rapid Prototyping J. 15 59-70
8. Limaye A S and Rosen D W 2007 Process planning method for mask projection microstereolithography Rapid Prototyping J. 13 76-84 (Pubitemid 46516215)
9. Ha Y M, Choi J W and Lee S H 2008 Mass production of 3-D microstructures using projection microstereolithography J. Mech. Sci. Technol. 22 514-21
10. Brtolo P J S, Almeida H and Laoui T 2009 Rapid prototyping and manufacturing for tissue engineering scaffolds Int. J. Comput. Appl. Technol. 36 1-9
11. Lee S J, Kang H W, Park J K, Rhie J W, Hahn S K and Cho D W 2008 Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds Biomed. Microdevices 10 233-41 (Pubitemid 351337926)
12. Mapili G, Lu Y, Chen S and Roy K 2005 Laser-layered microfabrication of spatially patterned functionalized tissue engineering scaffolds J. Biomed. Mater. Res. B 75B 414-24 (Pubitemid 41609564)
13. Arcaute K, Mann B K and Wicker R B 2006 Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells Ann. Biomed. Eng. 34 1429-41 (Pubitemid 44451089)
14. Lee D, Miyoshi T, Takaya Y and Ha T 2006 3D microfabrication of photosensitive resin reinforced with ceramic nanoparticles using LCD microstereolithography J. Laser Micro/Nanoeng. 1 142-8
15. Wu S, Han L H and Chen S 2009 Three-dimensional selective growth of nanoparticles on a polymer microstructure Nanotechnology 20 285312
16. Han L H, Mapili G, Chen S and Roy K 2008 Projection microfabrication of three-dimensional scaffolds for tissue engineering J. Manuf. Sci. Eng. 130 021005
17. Bertsch A, Jiguet S, Bernhard P and Renaud P 2002 Proc. Mater. Res. Soc. Symp.: Rapid Prototyping Technologies (Boston, MA) vol 758 (Cambridge Journals online) p 3
18. Stampfl J, Baudis S, Heller C, Liska R, Neumeister A and Kling R 2008 Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography J. Micromech. Microeng. 18 125014
19. Sun C, Fang N, Wu D M and Zhang X 2005 Projection micro-stereolithography using digital micro-mirror dynamic mask Sensors Actuator A 121 113-20 (Pubitemid 40940790)
20. Gunatillake P A and Adhikari R 2003 Biodegradable synthetic polymers for tissue engineering Eur. Cells Mater. 5 1-16 (Pubitemid 38957397)
21. Kasper K F, Tanahashi K, Fisher J P and Mikos A G 2009 Synthesis of poly(propylene fumarate) Nat. Protoc. 4 518-25
22. Choi J W, Wicker R, Lee S H, Choi K H, Ha C S and Chung I 2009 Fabrication of 3D biocompatible/biodegradable micro scaffolds using dynamic mask projection microstereolithography J. Mater. Process. Technol. 209 5494-503
23. Hasirci V, Litman A E, Trantolo D J, Gresser J D, Wise D L and Margolis H C 2002 PLGA bone plates reinforced with crosslinked PPF J. Biomater. Sci. Mater. Med. 13 159-67 (Pubitemid 34169385)
24. Wang S, Lu L C, Gruetzmacher J A, Currier B L and Yaszemski M J 2005 A biodegradable and cross-linkable multiblock copolymer consisting of poly(propylene fumarate) and poly(ε-caprolactone): synthesis, characterization, and physical properties Macromolecules 38 7358-70 (Pubitemid 41305036)
25. Lee K W, Wang S F, Lu L C, Jabbari E, Currier B L and Yaszemski M J 2006 Fabrication and characterization of poly(propylene fumarate) scaffolds with controlled pore structures using 3-dimensional printing and injection molding Tissue Eng. 12 2801-11 (Pubitemid 46141248)
26. Jansen J, Melchels F P W, Grijpma D W and Feijen J 2009 Fumaric acid monoethyl ester-functionalized poly(D,L-lactide)/N-vinyl-2 pyrrolidone resins for the preparation of tissue engineering scaffolds by stereolithography Biomacromolecules 10 214-20
27. Wang S F, Kempen D H, Simha N X, Lewis J L, Windebank A J, Yaszemski M J and Lu L C 2008 Photo-cross-linked hybrid polymer networks consisting of poly(propylene fumarate) and poly(caprolactone fumarate): controlled physical properties and regulated bone and nerve cell responses Biomacromolecules 9 1229-41 (Pubitemid 351639577)
28. Lee K W, Wang S F, Fox B C, Ritman E L, Yaszemski M J and Lu L C 2007 Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters Biomacromolecules 8 1077-84 (Pubitemid 46672683)
29. Kim K, Dean D, Wallace J, Breithaupt R, Mikos A G and Fisher J P 2011 The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells Biomaterials 32 3750-63
30. Lan P X, Lee J W, Seol Y J and Cho D W 2009 Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification J. Mater. Sci. Mater. Med. 20 271-9
31. Lee J W, Lan P X, Kim B, Lim G and Cho D W 2008 Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro-stereolithography technology J. Biomed. Mater. Res. B 87 1-9
32. Lee J W, Kang K S, Lee S H, Kim J Y, Lee B K and Cho D W 2011 Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres Biomaterials 32 744-52
33. Oliver W C and Pharr G M 1992 An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J. Mater. Res. 7 1565-83
34. Menck J, Munz J D, Quandt E, Weppelmann E R and Swain M V 1997 Determination of elastic modulus of thin layers using nanoindentation J. Mater. Res. 12 2475-84 (Pubitemid 127564732)
35. Fisher J P, Timmer M D, Holland T A, Dean D, Engel P S and Mikos A G 2003 Photoinitiated cross-linking of the biodegradable polyester poly(propylene fumarate): part I. Determination of network structure Biomacromolecules 4 1327-34 (Pubitemid 37184648)
36. Shi X, Hudson J L, Spicer P P, Tour J M, Krishnamoorti R and Mikos A G 2005 Rheological behavior and mechanical characterization of injectable poly(propylene fumamate)/single-walled carbon nanotube composites for bone tissue engineering Nanotechnology 16 S531-8
37. Abgrall P and Gué A M 2007 Lab-on-chip technologies: making a microfluidic network and coupling it into a complete microsystem-a review J. Micromech. Microeng. 17 R15-49