Rapid prototyping and manufacturing for tissue engineering scaffolds

International Journal of Computer Applications in Technology

Volumn 36, Issue 1, 2009, Pages 1-9

  Bartolo, P J S ^a   Almeida, H ^a   Laoui, T ^b  

^a Institute for Polymers and Composites   (Portugal)

^b UNIVERSITY OF WOLVERHAMPTON   (United Kingdom)

Author keywords

Rapid prototyping; Scaffolds; Tissue engineering

Indexed keywords

3D PRINTERS; AUTOMOBILE MANUFACTURE; LASER HEATING; RAPID PROTOTYPING; SCAFFOLDS; SINTERING; TISSUE; TISSUE ENGINEERING;

CONVENTIONAL TECHNIQUES; PORE MORPHOLOGY; RAPID PROTOTYPING AND MANUFACTURING; REPRODUCIBILITIES; RESEARCH EFFORTS; SCAFFOLD STRUCTURES; THREE-DIMENSIONAL (3D) PRINTING; TISSUE ENGINEERING SCAFFOLD;

SCAFFOLDS (BIOLOGY);

EID: 67650494384     PISSN: 09528091     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJCAT.2009.026664     Document Type: Article

References (41)

1. Ang. T.H., Sultana. F.S.A., Hutmacher. D.W., Wong. Y.S., Fuh. J.Y.H., Mo. X.M., Loh. H.T., Burdet. E. and Teoh. S.H. (2002) 'Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispersing system'. Materials Science and Engineering. Vol. C20. pp.35-12.
2. Bártolo. P.J. (2006) 'State of the art of solid freeform fabrication for soft and hard tissue engineering'. Design and Nature III: Comparing Design in Nature with Science and Engineering (pp.233-243). Southampton. UK: WIT Press.
3. Bártolo. P.J. and Mitchell. G. (2003) 'Stereo-thermal- lithography'. Rapid Prototyping Journal. Vol. 9. pp.150-156.
4. Baŕtolo. P., Mendes. A. and Jardini. A. (2004) 'Bio-prototyping'. In M.W. Collins and C.A. Brebbia (Eds). Design and Nature II (pp.535-543). Southampton. UK: WIT Press.
5. Bertsch. A., Jiguet. S., Bernhards. P. and Renaud. P. (2003) 'Microstereolithography: a review'. Paper presented at the Materials Research Society Symposium. Vol. 758. pp.LL.1.1.1-LL.1.1.13. In proceedings.
6. Carvalho. C., Landers. R., Mulhaupt. R., Hubner. U. and Schmelzeisen. R. (2005) 'Fabrication of soft and hard biocompatible scaffolds using 3D-Bioplotting'. in P.J. Bartolo. A.J. Mateus. F.C. Batista. H.A. Almeida. J.C. Vasco. M.A. Correia. N.F. Alves. N.C. André. P.P. Novo. P. Lima. P.C. Custódio. P.G. Martinho. R.A. Carvalh (Eds). Virtual Modelling and Rapid Manufacturing - Advanced Research in Virtual and Rapid Prototyping. London: Taylor and Francis.
7. Chu. T-M.G., Halloran. J.W., Hollister. S.J. and Feinberg. S.E.
8. (2001) 'Hydroxyapatite implants with designed internal architecture'. Journal of Materials Science: Materials in Medicine. Vol. 12. pp.471-478.
9. Cooke. M.N., Fisher. J.P., Dean. D., Rimnac. C. and Mikos. A.G. (2002) 'Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth'. Journal of Biomedical Materials Research Part B: Applied Biomaterials. Vol. 64B. pp.65-69.
10. Crump. S.S. (1989) 'Apparatus method for creating three- dimensional objects'. US Pat. 5121329.
11. Fischer. J.P., Dean. D., Engel. P.S. and Mikos. A. (2001) 'Photoinitiated polymerization of biomaterials'. Annual Review of Materials Research. Vol. 31. pp.171-181.
12. Gomes. M.E. and Reis. R.L. (2004) 'Biodegradable polymers and composites in biomedical applications: from catgut to tissue engineering. Part 2 Systems for temporary replacement and advanced tissue regeneration'. International Materials Reviews. Vol. 49. pp.274-285.
13. Griffith. M.L. and Halloran. J.W. (1996) 'Freeform fabrication of ceramics via stereolithography'. Journal of the American Ceramic Society. Vol. 79. pp.2601-2608.
14. Hutmacher. D.W., Schantz. T., Zein. I., Ng. K.W., Teoh. S.H. and Tan. K.C. (2001) 'Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modelling'. Journal of Biomedical Materials Research. Vol. 55. pp.203-216.
15. Kim. S.S., Utsunomiya. H., Koski. J.A., Wu. B.M., Cima. M.J., Sohn. J., Mukai. K., Griffith. L.G. and Vacanti. J.P. (1998) 'Survival and function of hepatocytes o a novel three- dimensional synthetic biodegradable polymer scaffolds with an intrinsic network of channels'. Annals of Surgery. Vol. 228. pp.8-13.
16. Koh. Y-H. Jun. I-K. and Kim. H-E. (2006) 'Fabrication of poly(caprolactone)/hydroxyapatite scaffold using rapid direct deposition'. Materials Letters. Vol. 60. pp.184-1187.
17. Kawata. S. and Sun. H.B. (2003) 'Two-photon photo- polymerization as a tool for making micro-devices'. Applied Surface Science. Vol. 208/209. pp.153-158.
18. Lam. C.X.F., Mo. X.M., Teoh. S.H. and Hutmacher. D.W. (2002) 'Scaffold development using 3D printing with a starch-based polymer'. Materials Science and Engineering. Vol. 20. pp.49-56.
19. Lee. G. and Barlow. J.W. (1996) 'Selective laser sintering of bioceramic materials for implants'. Paper presented at the '96 SFF Symposium. Austin. TX. August 12-14. In proceedings.
20. Lemercier. G., Mulatier. J.C., Martineau. C., Anemian. R., Andraud. C., Wang. I., Stephan. O., Amari. N. and Baldeck. P. (2005) 'Two-photon absorption: from optical limiting to 3D microfabrication'. Comptes Rendus Chimie. Vol. 8. pp.1308-1316.
21. Leong. K.F., Cheah. C.M. and Chua. C.K. (2003) 'Solid freeform fabrication of the three-dimensional scaffolds for engineering replacement tissues and organs'. Biomaterials. Vol. 24. pp.2363-2378.
22. Levy. R.A., Chu. T.G.M., Holloran. J.W., Feinberg. S.E. and Hollister. S. (1997) 'CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant'. American Journal of Neuroradiology. Vol. 18. pp.1522-1525.
23. Limpanuphap. S. and Derby. B. (2002) 'Manufacture of biomaterials by a novel printing process'. Journal of Materials Science: Materials in Medicine Vol. 13. pp.1163-1166.
24. Mahajan. H.P. (2005) 'Evaluation of chitosan gelatine complex scaffolds for articular cartilage tissue engineering'. MSc thesis. Mississipi State University. USA.
25. Matsuda. T. and Mizutani. M. (2002) 'Liquid acrylate- endcapped poly(s-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs'. Journal of Biomedical Materials Research. Vol. 62. pp.395-403.
26. Mironov. V., Boland. T., Trusk. T., Forgacs. G. and Markwald. R.R. (2003) 'Organ printing: computer-aided jet- based 3D tissue engineering'. Trends in Biotechnology. Vol. 21. pp.157-161.
27. NSF (2003) 'The emergence of tissue engineering as a research field'. Report. National Science Foundation. USA.
28. Park. A., Wu. B. and Griffith. L.G. (1998) 'Integration of surface modification and 3D fabrication techniques to prepare patterned poly(L-lactide) substrates allowing regionally selective cell adhesion'. Journal of Biomaterials Science- Polymer Edition. Vol. 9. pp.89-110.
29. Pfister. A., Landers. R., Laib. A., Hiibner. U., Schmelzeisen. R. and Mülhaupt. R. (2004) 'Biofunctional rapid prototyping for tissue-engineering applications: 3D bioplotting versus 3D printing'. Journal of Applied Polymer Science: Part A: Polymer Chemistry. Vol. 42. pp.624-638.
30. Reignier. J. and Huneault. M.A. (2006) 'Preparation of interconnected poly(caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching'. Polymer. Vol. 47. pp.4703-4717.
31. Sachlos. E., Reis. N., Ainsley. C., Derby. B. and Czernuszka. J.T. (2003) 'Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication'. Biomaterials. Vol. 24. pp.1487-1497.
32. Sachs. E.M., Haggerty. J.S., Cima. M.S. and Williams. P.A. (1989) 'Three-dimensional printing techniques'. US Pat. 5204055.
33. Skalak. R. and Fox. C.F. (1988) Tissue Engineering. New York: Alan R. Liss. Taboas. J.M., Maddox. R.D., Krebsbach. P.H. and Hollister. S.J. (2003) 'Indirect solid free form fabrication of local and global porous biomimetic and composite 3D polymer-ceramic scaffolds'. Biomaterials. Vol. 24. pp.181-194.
34. Tormen. M., Businaro. L., Altissimo. M., Romanato. F., Cabrini. S., Perennes. F., Proitti. R., Sun. H.B., Kawata. S. and Fabrizio. E.D. (2004) Microelectronic Engineering. Vol. 73/74. pp.535-541.
35. Vozzi. G., Flaim. C., Ahluwalia. A. and Bhatia. S. (2003) 'Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition'. Biomaterials. Vol. 24. pp.2533-2540.
36. Wang. F., Shor. L., Darling. A., Khalil. S., Guferi. S. and Lau. A. (2004) ' Precision deposition and characterization of cellular poly-s-caprolactone tissue scaffolds'. Rapid Prototyping Journal. Vol. 10. pp.42-19.
37. Williams. J.M., Adewunmi. A., Schek. R.M., Flanagan. C.L., Krebsbach. P.H., Feinberg. S.E., Hollister. S.J. and Das. S. (2005) 'Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering'. Biomaterials. Vol. 26. pp.4817-1827.
38. Woodfield. T.B.F., Malda. J., de Wijn. J., Peters. F., Riesle. J. and van Blitterswijk. C.A. (2004) 'Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique'. Biomaterials. Vol. 25. pp.4149-161.
39. Yan. Y., Zhang. R. and Lin. F. (2003) 'Research and applications on bio-manufacturing'. Paper presented at the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Leiria. Portugal. In proceedings.
40. Zein. I., Hutmacher. D.W., Tan. K.C. and Teoh. S.H. (2002) 'Fused deposition modeling of novel scaffolds architectures for tissue engineering applications'. Biomaterials. Vol. 23. pp.1169-1185.
41. Zeltinger. J., Sheerwood. J.K., Graham. D.M., Mueller. R. and Griffith. L.G. (2001) 'Effects of pore size and void fraction on cellular adhesion. proliferation and matrix deposition'. Tissue Engineering. Vol. 7. pp.557-572.