Complex joint geometry

Modeling of Adhesively Bonded Joints

Volumn , Issue , 2008, Pages 131-154

  Öchsner, Andreas ^a   Da Silva, Lucas Filipe Martins ^b   Adams, Robert D ^c  

^a UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

^b UNIVERSITY OF PORTO   (Portugal)

^c UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 79952152546     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-540-79056-3_5     Document Type: Chapter

References (101)

1. Actis RL, Szabo BA (2003) Analysis of bonded and fastened repairs by the p-version of the finiteelement method. Comput Math Appl 46: 1-14.
2. Adams RD, Atkins RW, Harris JA, Kinloch AJ (1986) Stress analysis and failure properties of carbon-fibre-reinforced-plastic/steel double-lap joints. J Adhes 20: 29-53.
3. Adams RD, Chambers SH, Del Strother PJA, Peppiatt NA (1973) Rubber model for adhesive lap joints. J Strain Anal 8: 52-57.
4. Adams RD, Davies R (1996) Strength of joints involving composites. J Adhes 59: 171-182.
5. Adams RD, Davies R (2002) Strength of lap shear joints. In: The mechanics of adhesion (Dillard DA and Pocius AV, ed.). Amsterdam: Elsevier, pp. 111-144.
6. Adams RD, Harris JA (1987) The influence of local geometry on the strength of adhesive joints. Int J Adhes Adhes 7: 69-80.
7. Adams RD, Peppiatt NA (1974) Stress analysis of adhesive-bonded lap joints. J Strain Anal 9: 185-196.
8. Al-Samhann A, Darwish SMH (2003) Strength prediction of weld-bonded joints. Int J Adhes Adhes 23: 23-28.
9. Amijima S, Fujii T (1989) A simple stress analysis method for adhesive bonded tapered joints. Int J Adhes Adhes 9: 155-160.
10. Andreassi L, Baudille R, Biancolini ME (2007) Spew formation in a single lap joint. Int J AdhesAdhes 27: 458-468.
11. Apalak MK (1999) Geometrically non-linear analysis of adhesively bonded corner joints. J Adhes Sci Technol 13: 1253-1285.
12. Apalak MK (2000) Geometrically non-linear analysis of an adhesively bonded modified double containment corner joint -I. J Adhes Sci Technol 14: 1159-1177.
13. Apalak MK (2002) On the non-linear elastic stresses in an adhesively bonded T-joint with double support. J Adhes Sci Technol 16: 459-491.
14. Apalak MK, Apalak Z, Gunes R (2003) Thermal non-linear elastic stress analysis of an adhesively bonded T-joint. J Adhes Sci Technol 17: 995-1016.
15. Apalak MK, Davies R (1993) Analysis and design of adhesively bonded comer joints. Int J Adhes Adhes 13: 219-235.
16. Apalak MK, Davies R (1994) Analysis and design of adhesively bonded corner joints: fillet effect. Int J Adhes Adhes 14: 163-174.
17. Apalak MK, Engin A (2004) Effect of adhesive free-end geometry on the initiation and propagation of damaged zones in adhesively bonded lap joints. J Adhes Sci Technol 18: 529-559.
18. Apalak MK, Gunes R (2007) Elastic flexural behaviour of an adhesively bonded single lap joint with functionally graded adherends. Mater Des 28: 1597-1617.
19. Avila AF, Bueno PO (2004) Stress analysis on a wavy-lap bonded joint for composites. Int J Adhes Adhes 24: 407-414.
20. Bahei-El-Din YA, Dvorak GJ (2001) New designs of adhesive joints for thick composite laminates. Compos Sci Technol 61: 19-40.
21. Belingardi G, Goglio L, Rossetto M (2002) Impact behaviour of bonded built-up beams: Experimental results. Int J Adhes Adhes 25: 173-180.
22. Blackman BRK, Hadavinia H, Kinloch AJ, Paraschi M, Williams JG (2003) The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test. Eng Fract Mech 70: 233-248.
23. Bogdanovich AE, Kizhakkethara I (1999) Three-dimensional finite element analysis of doublelap composite adhesive bonded joint using submodeling approach. Compos Part B-Eng 30: 537-551.
24. Bouiadjra BB, Fekirini H, Belhouari M, Boutabout B, Serier B (2007) Fracture energy for repaired cracks with bonded composite patch having two adhesive bands in aircraft structures. Comp Mater Sci 40: 20-26.
25. Campilho RDSG, de Moura MFSF, Domingues JJMS (2007) Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model. J Adhes Sci Technol 21: 855-870.
26. Chan WS, Vedhagiri S (2001) Analysis of composite bonded/bolted joints used in repairing. J Compos Mater 35: 1045-1061.
27. Chen Z (1985) The failure and fracture analysis of adhesive bonds, PhD thesis, Department of Mechanical Engineering, University of Bristol, UK.
28. Cherry BW, Harrison NL (1970) The optimum profile for a lap joint. J Adhes 2: 125-128.
29. Crocombe AD, Adams RD (1981) Influence of the spew fillet and other parameters on the stress distribution in the single lap joint. J Adhes 13: 141-155.
30. da Silva LFM, Adams RD (2002) The strength of adhesively bonded T-joints. Int J Adhes Adhes 22: 311-315.
31. da Silva LFM, Adams RD (2007a) Techniques to reduce the peel stresses in adhesive joints with composites. Int J Adhes Adhes 27: 227-235.
32. da Silva LFM, Adams RD (2007b) Joint strength predictions for adhesive joints to be used over a wide temperature range. Int J Adhes Adhes 27: 362-379.
33. da Silva LFM, Adams RD (2007c) Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives. Int J Adhes Adhes 27: 216-226.
34. Darwish SM (2004) Analysis of weld-bonded dissimilar materials. Int J Adhes Adhes 24: 347-354.
35. Darwish SM, Al-Samhann A (2004) Design rationale of weld-bonded joints. Int J Adhes Adhes 24: 367-377.
36. de Moura MFSF, Daniaud R, Magalhães AG (2006) Simulation of mechanical behaviour of composite bonded joints containing strip defects. Int J Adhes Adhes 26: 464-473.
37. Deng J, Lee MMK (2007) Effect of plate end and adhesive spew geometries on stresses in retrofitted beams bonded with a CFRP plate. Compos Part B-Eng, doi:10.1016/j.compositesb. 2007.05.004 http://dx.doi.org/10.1016/j.compositesb. 2007.05.004.
38. Dorn L, Liu W (1993) The stress state and failure properties of adhesive-bonded plastic/metal joints. Int J Adhes Adhes 13: 21-31.
39. Du J, Lindeman DD, Yarusso DJ (2004) Modeling the peel performance of pressure-sensitive adhesives. J Adhes 80: 601-612.
40. Dvorak GJ, Zhang J, Canyurt O (2001) Adhesive tongue-and-groove joints for thick composite laminates. Compos Sci Technol 61: 1123-1142.
41. Feih S, Shercliff HR (2005) Adhesive and composite failure prediction of single-L joint structures under tensile loading. Int J Adhes Adhes 25: 47-59.
42. Fessel G, Broughton JG, Fellows NA, Durodola JF, Hutchinson AR (2007) Evaluation of different lap-shear joint geometries for automotive applications. Int J Adhes Adhes 27: 574-583.
43. Fitton MD, Broughton JG (2005) Variable modulus adhesives: An approach to optimized joint performance. Int J Adhes Adhes 25: 329-336.
44. Gannesh VK, Choo TS (2002) Modulus graded composite adherends for single-lap bonded joints. J Compos Mater 36: 1757-1767.
45. Goland M, Reissner E (1944) The stresses in cemented joints. J Appl Mech 66: A17-A27.
46. Grassi M, Cox B, Zhang X (2006) Simulation of pin-reinforced single-lap composite joints. Compos Sci Technol 66: 1623-1638.
47. Groth HL (1988) Stress singularities and fracture at interface corners in bonded joints. Int J Adhes Adhes 8: 107-113.
48. Groth HL, Nordlund P (1991) Shape optimization of bonded joints. Int J Adhes Adhes 11: 204-212.
49. Guild FJ, Potter KD, Heinrich J, Adams RD, Wisnom MR (2001) Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends II. Finite element analysis. Int J Adhes Adhes 21: 435-443.
50. Gunnion AJ, Herszberg I (2006) Parametric study of scarf joints in composite structures. Compos Struct 75: 364-376.
51. Harris JA, Adams RD (1984) Strength prediction of bonded single lap joints by non-linear finite element methods. Int J Adhes Adhes 4: 65-78.
52. Hart-Smith LJ (1973) Adhesive bonded double lap joints. NASA CR-112235.
53. Hildebrand M (1994) Non-linear analysis and optimization of adhesively bonded single lap joints between fibre-reinforced plastics and metals. Int J Adhes Adhes 14: 261-267.
54. Kaye R, Heller M(2005) Through-thickness shape optimisation of typical double lap-joints including effects of differential thermal contraction during curing. Int J Adhes Adhes 25: 227-238.
55. Kaye RH, Heller M(2002) Through-thickness shape optimisation of bonded repairs and lap-joints. Int J Adhes Adhes 22: 7-21.
56. Kilic B, Madenci E, Ambur DR (2006) Influence of adhesive spew in bonded single-lap joints. Eng Fract Mech 73: 1472-1490.
57. Kim H (2003) The influence of adhesive bondline thickness imperfections on stresses in composite joints. J Adhes 79: 621-642.
58. Kim JK, Lee DG (2001) Thermal characteristics of tubular single lap adhesive joints under axial loads. J Adhes Sci Technol 15: 1511-1528.
59. Kim JK, Lee DG (2004) Effects of applied pressure and temperature during curing operation on the strength of tubular single-lap adhesive joints. J Adhes Sci Technol 18: 87-107.
60. Kim KS, Kim WT, Lee DG, Jun EJ (1992) Optimal tubular adhesive-bonded lap joint of the carbon fiber epoxy composite shaft. Compos Struct 21: 163-176.
61. Kim YG, Oh JH, Lee DG (1999) Strength of adhesively-bonded tubular single lap carbon/epoxy composite-steel joints. J Compos Mater 33: 1897-1917.
62. Kwon JW, Lee DG (2000) The effects of surface roughness and bond thickness on the fatigue life of adhesively bonded tubular single lap joints. J Adhes Sci Technol 14: 1085-1102.
63. Lang TP, Mallick PK (1998) Effect of spew geometry on stresses in single lap adhesive joints. Int J Adhes Adhes 18: 167-177.
64. Lang TP, Mallick PK (1999) The effect of recessing on the stresses in adhesively bonded single-lap joints. Int J Adhes Adhes 19: 257-271.
65. Liljedahl CDM, Crocombe AD, Wahab MA, Ashcroft IA (2007) Modelling the environmental degradation of adhesively bonded aluminium and composite joints using a CZM approach. Int J Adhes Adhes 27: 505-518.
66. Lin W-H, Jen M-HR (1999) The strength of bolted and bonded single-lapped composite joints in tension. J Compos Mater 33: 640-666.
67. Liu J, Liu J, Sawa T (2004) Strength and failure of bulky adhesive joints with adhesively-bonded columns. J Adhes Sci Technol 18: 1613-1623.
68. Liu J, Sawa T (2001) Stress analysis and strength evaluation of single-lap adhesive joints combined with rivets under external bending moments. J Adhes Sci Technol 15: 43-61.
69. Liu J, Sawa T (2003) Strength and finite element analyses of single-lap joints with adhesivelybonded columns. J Adhes Sci Technol 17: 1773-1784.
70. Marcadon V, Nadot Y, Roy A, Gacougnolle JL (2006) Fatigue behaviour of T-joints for marine applications. Int J Adhes Adhes 26: 481-489.
71. Nakagawa F, Sawa T (2001) Photoelastic thermal stress measurements in scarf adhesive joints under uniform temperature changes. J Adhes Sci Technol 15: 119-135.
72. Nakagawa F, Sawa T, Nakano Y, Katsuo M (1999) Two-dimensional finite element thermal stress analysis of adhesive butt joints containing some hole defects. J Adhes Sci Technol 13: 309-323.
73. Odi RA, Friend CM (2002) A comparative study of finite element models for the bonded repair of composite structures. J Reinf Plast Comp 21: 311-332.
74. Odi RA, Friend CM (2004) An improved 2D model for bonded composite joints. Int J Adhes Adhes 24: 389-405.
75. Oh JH (2007) Strength prediction of tubular composite adhesive joints under torsion. Compos Sci Technol 67: 1340-1347.
76. Okafor AC, Singh N, Enemuoh UE, Rao SV (2005) Design, analysis and performance of adhesively bonded composite patch repair of cracked aluminum aircraft panels. Compos Struct 71: 258-270.
77. Olia M, Rossettos JN (1996) Analysis of adhesively bonded joints with gaps subjected to bending. Int J Solids Struct 33: 2681-2693.
78. Patrick RL (ed.) (1976) Treatise on adhesion and adhesives - Structural adhesives with emphasis on aerospace applications, Vol. 4. Marcel Dekker, Inc., New York.
79. Peppiatt NA (1974) Stress analysis of adhesiv joints, PhD thesis, Department of Mechanical Engineering, University of Bristol, UK.
80. Pires I, Quintino L, Durodola JF, Beevers A (2003) Performance of bi-adhesive bonded aluminium lap joints. Int J Adhes Adhes 23: 215-223.
81. Renton WJ, Vinson Jr. (1975) The efficient design of adhesive bonded joints. J Adhes 7: 175-193.
82. Richardson G, Crocombe AD, Smith PA (1993) Comparison of two- And three-dimensional finite element analyses of adhesive joints. Int J Adhes Adhes 13: 193-200.
83. Rispler AR, Tong L, Steven GP, Wisnom MR (2000) Shape optimisation of adhesive fillets. Int J Adhes Adhes 20: 221-231.
84. Sabelkin V, Mall S, Hansen MA, Vandawaker RM, Derriso M (2007) Investigation into cracked aluminum plate repaired with bonded composite patch. Compos Struct 79: 55-66.
85. Sancaktar E, Kumar S (2000) Selective use of rubber toughening to optimize lap-joint strength. J Adhes Sci Technol 14: 1265-1296.
86. Sancaktar E, Nirantar P (2003) Increasing strength of single lap joints of metal adherends by taper minimization. J Adhes Sci Technol 17: 655-675.
87. Sancaktar E, Simmons SR (2000) Optimization of adhesively-bonded single lap joints by adherend notching. J Adhes Sci Technol 14: 1363-1404.
88. Schiermeier JE, Kansakar R, Mong D, Ransom JB, Aminpour MA, Stroud WJ (2001) p-Version interface elements in global/local analysis. Int J Numer Meth Eng 53: 181-206.
89. Semerdjiev S (1970) Metal to metal adhesive bonding. Business Book Limited, London, UK.
90. Serrano E (2001) Glued-in rods for timber structures - A 3D model and finite element parameter studies. Int J Adhes Adhes 21: 115-127.
91. Soutis C, Hu FZ (1997) Design and performance of bonded patch repairs of composite structures. Prc Instn Mech Engrs Part G 211: 263-271.
92. Srinivas S (1975) Analysis of bonded joints. NASA TN D-7855.
93. Temiz S (2006) Application of bi-adhesive in double-strap joints subjected to bending moment. J Adhes Sci Technol 20: 1547-1560.
94. Tong L, Sun X (2003) Nonlinear stress analysis for bonded patch to curved thin-walled structures. Int J Adhes Adhes 23: 349-364.
95. Towse A (1999) The use of Weibull statistics for predicting cohesive failure in double lap joints. PhD Dissertation, University of Bristol, UK.
96. Tsai MY, Morton J (1995) The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints. Compos Struct 32: 123-131.
97. Vallée T, Keller T (2006) Adhesively bonded lap joints from pultruded GFRP profiles. Part III: Effects of chamfers. Compos Part B-Eng 37: 328-336.
98. Volkersen O (1938) Die nietkraftoerteilung in zubeanspruchten nietverbindungen mit konstanten loschonquerschnitten. Luftfahrtforschung 15: 41-47.
99. Yan Z-M, You M, Yi X-S, Zheng X-L, Li Z (2007) A numerical study of parallel slot in adherend on the stress distribution in adhesively bonded aluminum single lap joint. Int J Adhes Adhes 27: 687-695.
100. You M, Yan Z-M, Zheng X-L, Yu H-Z, Li Z (2007) A numerical and experimental study of gap length on adhesively bonded aluminum double-lap joint. Int J Adhes Adhes 27: 696-702.
101. Zhao X (1991) Stress and failure analysis of adhesively bonded lap joints, PhD thesis, Department of Mechanical Engineering, University of Bristol, UK.