Effect of adhesive free-end geometry on the initiation and propagation of damaged zones in adhesively bonded lap joints

Journal of Adhesion Science and Technology

Volumn 18, Issue 5, 2004, Pages 529-559

  Apalak, M Kemal ^a   Engin, Aysel ^a  

^a ERCIYES UNIVERSITY   (Turkey)

Author keywords

Adhesive fillet; Adhesive joint; Damaged zone; Geometrical non linearity; Material non linearity; Plasticity; Stress analysis

Indexed keywords

BONDING; CRACK PROPAGATION; ELASTIC MODULI; INTERFACES (MATERIALS); NON NEWTONIAN FLOW; PLASTICITY; PRESS LOAD CONTROL; SCANNING ELECTRON MICROSCOPY; STIFFNESS; STRESS ANALYSIS; TENSILE TESTING; ADHESIVE JOINTS; TENSILE STRENGTH; TENSILE STRESS;

ADHERENT INTERFACE; ADHESIVE FILLET; DAMAGED ZONES; GEOMETRICAL NON-LINEARITY; LAP JOINTS; MATERIAL NON-LINEARITY;

ADHESIVE JOINTS; ADHESIVES;

ADHERENDS; ADHESIVE FILLETS; ADHESIVE LAYERS; ADHESIVELY BONDED LAP JOINT; DAMAGED ZONES; EPOXY ADHESIVES; FAILURE CRITERIA; FINITE ELEMENT; FRACTURE SURFACES; FREE SURFACES; GEOMETRICAL NON-LINEARITY; HYDROSTATIC STRESS STATE; INITIATION AND PROPAGATION; LOAD LEVELS; LOADING CONDITION; NONLINEAR BEHAVIOURS; OVERALL STIFFNESS; SEM MICROGRAPHS; SIMPLE METHOD; TENSILE LOADS; ULTIMATE STRAIN; VON MISES CRITERION;

EID: 3142709581     PISSN: 01694243     EISSN: None     Source Type: Journal    
DOI: 10.1163/156856104839293     Document Type: Article

References (40)

1. R. S. Raghava and R. M. Cadell, J. Mater. Sci. 8, 225 (1973).
2. M. K. Apalak and A. Engin, J. Adhesion Sci. Technol. 17, 1889-1921 (2003).
3. L. J. Hart-Smith, McDonnell-Douglas Co., Report No. 6059A, Long Beach, CA (1972).
4. L. J. Hart-Smith, NASA CR-112235, Langley Research Center, Hampton, VA (1973).
5. L. J. Hart-Smith, NASA CR-112236, Langley Research Center, Hampton, VA (1973).
6. L. J. Hart-Smith, NASA CR-112237, Langley Research Center, Hampton, VA (1973).
7. L. J. Hart-Smith, NASA CR-112238, Langley Research Center, Hampton, VA (1973).
8. L. J. Hart-Smith, NASA CR-2218, Langley Research Center, Hampton, VA (1974).
9. L. J. Hart-Smith, in: Developments in Adhesives - 2, A. J. Kinloch (Ed.), pp. 1-44. Elsevier Applied Science, London (1981).
10. F. Delale, F. Erdogan and M. N. Aydinoglu, J. Composite Mater. 15, 249-271 (1980).
11. F. Delale and F. Erdogan, Trans. ASME J. Appl. Mech. 48, 331-338 (1981).
12. J. W. Sawyer and P. A. Cooper, AIAA J. 19, 1443-1451 (1981).
13. J. A. Harris and R. D. Adams, Int. J. Adhesion Adhesives 4 (2), 65-78 (1984).
14. J. A. Harris and R. D. Adams, in: Adhesion 8, K. W. Allen (Ed.), pp. 1-18. Elsevier Applied Science, London (1984).
15. R. D. Adams and J. A. Harris, Int. J. Adhesion Adhesives 7, 69-80 (1987).
16. R. D. Adams, R. W. Atkins, J. A. Harris and A. J. Kinloch, J. Adhesion 20, 29-53 (1986).
17. A. D. Crocombe, Int. J. Adhesion Adhesives 9 (3), 167-178 (1989).
18. D. A. Bigwood and A. D. Crocombe, Int. J. Adhesion Adhesives 10 (1), 31-41 (1990).
19. A. D. Crocombe and D. A. Bigwood, J. Strain Analysis 27 (4), 211-218 (1992).
20. U. Edlund and A. Klarbling, Comput. Methods Appl. Mech. Eng. 78, 19-47 (1990).
21. A. J. Kinloch, Adhesion and Adhesives. Chapman and Hall, London (1987).
22. B. Chen and D. A. Dillard, Int. J. Solids Structures 38, 6907-6924 (2001).
23. B. Chen and D. A. Dillard, Int. J. Adhesion Adhesives 21, 357-368 (2001).
24. K. D. Potter, F. J. Guild, H. J. Harvey, M. R. Wisnom and R. D. Adams, Int. J. Adhesion Adhesives 21, 435-443 (2001).
25. F. J. Guild, K. D. Potter, J. Heinrich, R. D. Adams and M. R. Wisnom, Int. J. Adhesion Adhesives 21, 445-453 (2001).
26. M. Kayupov and Y. A. Dzenis, Composite Struct. 54, 215-220 (2001).
27. P. T. Cheuk and L. Tong, Composites Sci. Technol. 62, 1079-1095 (2002).
28. A. Sheppard, D. Kelly and L. Tong, Int. J. Adhesion Adhesives 18, 385-400 (1998).
29. J. I. R. Blake, R. A. Shenoi, J. House and T. Turton, Composites A 32, 641-653 (2001).
30. U. Edlund and A. Klarbring, Int. J. Solid. Struct. 30, 2693-2708 (1993).
31. L. E. Malvern, Introduction to the Mechanics of a Continuous Medium. Prentice-Hall, London (1969).
32. A. A. Saada, Elasticity - Theory and Applications. Pergamon Press, Oxford (1974).
33. A. D. Crocombe and A. C. Moult, in: Adhesion 12, K. W. Allen (Ed.). Elsevier Applied Science, London (1988).
34. W. Johnson and P. B. Mellor, Engineering Plasticity. Van Nostrand Reinhold, New York, NY (1973).
35. O. C. Zienkiewicz and R. C. Taylor, The Finite Element Method (Solid and Fluid Mechanics, Dynamics and Non-linearity), Vol. 2. McGraw-Hill, New York, NY (1991).
36. M. A. Crisfield, Non-linear Finite Element Analysis of Solids and Structures, Vol. 1. Wiley, New York, NY (1991).
37. M. Kleiber, Incremental Finite Element Modelling in Non-linear Solid Mechanics. Ellis-Horwood, London (1989).
38. R. D. Adams and W. C. Wake, Structural Adhesive Joints in Engineering. Elsevier Applied Science, London (1984).
39. M. K. Apalak and R. Davies, Int. J. Adhesion Adhesives 14 (3), 163-174 (1994).
40. J. Coppendale, Stress and failure analysis of structural adhesives, PhD Thesis, Bristol University, Bristol (1977).