Recovery of sensor embedded washing machines using a multi-kanban controlled disassembly line

Robotics and Computer-Integrated Manufacturing

Volumn 27, Issue 2, 2011, Pages 318-334

  Ilgin, Mehmet Ali ^a   Gupta, Surendra M ^b  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

^b NORTHEASTERN UNIVERSITY   (United States)

Author keywords

Component discriminating demand; Disassembly; Discrete event simulation; Green manufacturing; Product recovery; Sensor embedded products

Indexed keywords

BACKORDERS; COMPONENT DISCRIMINATING DEMAND; CONVENTIONAL PRODUCTS; DISASSEMBLY; DISASSEMBLY LINE; END-OF-LIFE PRODUCTS; GREEN MANUFACTURING; KANBAN SYSTEM; NON-FUNCTIONAL; ORTHOGONAL ARRAY; PERFORMANCE MEASURE; PRODUCT RECOVERY; SERVICE PERSONNEL; STOCHASTIC BEHAVIOR; T-TESTS;

DESIGN OF EXPERIMENTS; DISCRETE EVENT SIMULATION; ENVIRONMENTAL REGULATIONS; INDUSTRIAL APPLICATIONS; MANUFACTURE; PROFITABILITY; SENSORS; WASHERS; WASHING; WASHING MACHINES;

RECOVERY;

EID: 78649318256     PISSN: 07365845     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.rcim.2010.07.016     Document Type: Article

References (76)

1. A. Gungor, and S.M. Gupta Issues in environmentally conscious manufacturing and product recovery: a survey Computers & Industrial Engineering 36 4 1999 811 853
2. M.A. Ilgin, and S.M. Gupta Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art Journal of Environmental Management 91 3 2010 563 591
3. A.J.D. Lambert Disassembly sequencing: a survey International Journal of Production Research 41 16 2003 3721 3759
4. S.M. McGovern, and S.M. Gupta Ant colony optimization for disassembly sequencing with multiple objectives The International Journal of Advanced Manufacturing Technology 30 5 2006 481 496
5. H.J. Kim, M. Ciupek, A. Buchholz, and G. Seliger Adaptive disassembly sequence control by using product and system information Robotics and Computer-Integrated Manufacturing 22 3 2006 267 278
6. C. Andrs, S. Lozano, and B. Adenso-Daz Disassembly sequence planning in a disassembly cell context Robotics and Computer-Integrated Manufacturing 23 6 2007 690 695
7. H. Srinivasan, R. Figueroa, and R. Gadh Selective disassembly for virtual prototyping as applied to de-manufacturing Robotics and Computer-Integrated Manufacturing 15 3 1999 231 245
8. C. Mascle, and B.-A. Balasoiu Algorithmic selection of a disassembly sequence of a component by a wave propagation method Robotics and Computer-Integrated Manufacturing 19 5 2003 439 448
9. M. Tripathi, S. Agrawal, M.K. Pandey, R. Shankar, and M.K. Tiwari Real world disassembly modeling and sequencing problem: optimization by Algorithm of Self-Guided Ants (ASGA) Robotics and Computer-Integrated Manufacturing 25 3 2009 483 496
10. C. Chung, and Q. Peng An integrated approach to selective-disassembly sequence planning Robotics and Computer-Integrated Manufacturing 21 4-5 2005 475 485
11. F.T. Altekin, L. Kandiller, and N.E. Ozdemirel Profit-oriented disassembly-line balancing International Journal of Production Research 46 10 2008 2675 2693
12. Y. Barba-Gutirrez, B. Adenso-Daz, and S.M. Gupta Lot sizing in reverse MRP for scheduling disassembly International Journal of Production Economics 111 2 2008 741 751
13. A. Gungor, and S.M. Gupta Disassembly line in product recovery International Journal of Production Research 40 11 2002 2569 2589
14. Y. Tang, and M.C. Zhou A systematic approach to design and operation of disassembly lines IEEE Transactions on Automation Science and Engineering 3 3 2006 324 329
15. S.M. McGovern, and S.M. Gupta Combinatorial optimization analysis of the unary NP-complete disassembly line balancing problem International Journal of Production Research 45 18-19 2007 4485 4511
16. S.M. McGovern, and S.M. Gupta A balancing method and genetic algorithm for disassembly line balancing European Journal of Operational Research 179 3 2007 692 708
17. L.-P. Ding, Y.-X. Feng, J.-R. Tan, and Y.-C. Gao A new multi-objective ant colony algorithm for solving the disassembly line balancing problem The International Journal of Advanced Manufacturing Technology 48 58 2010 761 771
18. E. Kongar, and S.M. Gupta Disassembly to order system under uncertainty Omega 34 6 2006 550 561
19. T.C. Kuo Disassembly sequence and cost analysis for electromechanical products Robotics and Computer-Integrated Manufacturing 16 1 2000 43 54
20. B. Scholz-Reiter, H. Scharke, and A. Hucht Flexible robot-based disassembly cell for obsolete TV-sets and monitors Robotics and Computer-Integrated Manufacturing 15 3 1999 247 255
21. K. Kazmierczak, S.E. Mathiassen, M. Forsman, and J. Winkel An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly Applied Ergonomics 36 3 2005 263 273
22. K. Kazmierczak, W.P. Neumann, and J. Winkel A case study of serial-flow car disassembly: ergonomics, productivity and potential system performance Human Factors and Ergonomics in Manufacturing 17 4 2007 331 351
23. Y. Tang, M. Zhou, and M. Gao Fuzzy-Petri-net based disassembly planning considering human factors IEEE Transactions on Systems, Man and Cybernetics 36 4 2006 718 726
24. F. Torres, P. Gil, S.T. Puente, J. Pomares, and R. Aracil Automatic PC disassembly for component recovery The International Journal of Advanced Manufacturing Technology 23 1 2004 39 46
25. E. Uhlmann, F. Elbing, and J. Dittberner Innovative manufacturing technologies for the disassembly of consumer goods Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 9 2004 1039 1046
26. S. Kara, P. Pornprasitpol, and H. Kaebernick Selective disassembly sequencing: a methodology for the disassembly of end-of-life products CIRP AnnalsManufacturing Technology 55 1 2006 37 40
27. A.J.D. Lambert, and S.M. Gupta Disassembly modeling for assembly, maintenance, reuse, and recycling 2005 CRC Press Boca Raton, FL
28. S.M. Gupta, and Y.A.Y. Al-Turki An algorithm to dynamically adjust the number of kanbans in a stochastic processing times and variable demand environment Production Planning & Control 8 2 1997 133 141
29. S.M. Gupta, Y.A.Y. Al-Turki, and R.F. Perry Flexible kanban system International Journal of Operations and Production Management 19 10 1999 1065 1093
30. S.M. Gupta, and Y.A.Y. Al-Turki Adapting just-in-time manufacturing systems to preventive maintenance interruptions Production Planning & Control 9 4 1998 349 359
31. S.M. Gupta, and Y.A.Y. Al-Turki The effect of sudden material handling system breakdown on the performance of a JIT system International Journal of Production Research 36 7 1998 1935 1960
32. V. Tardif, and L. Maaseidvaag An adaptive approach to controlling kanban systems European Journal of Operational Research 132 2 2001 411 424
33. K. Takahashi, and N. Nakamura Reacting J. I. T. ordering systems to the unstable changes in demand International Journal of Production Research 37 10 1999 2293 2313
34. K. Takahashi, and N. Nakamura Reactive logistics in a JIT environment Production Planning & Control 11 1 2000 20 31
35. K. Takahashi, and N. Nakamura Decentralized reactive kanban system European Journal of Operational Research 139 2 2002 262 276
36. K. Takahashi, K. Morikawa, and N. Nakamura Reactive JIT ordering system for changes in the mean and variance of demand International Journal of Production Economics 92 2 2004 181 196
37. Kizilkaya EA, Gupta SM. Modeling operational behavior of a disassembly line. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing IV. Philadelphia, PA, October 2627, 2004. p. 7993.
38. Kizilkaya EA, Gupta SM. Sudden material handling system breakdown in a disassembly line. In: Proceedings of the 2005 Northeast decision sciences institute conference. Philadelphia, PA, March 30April 1, 2005.
39. Kizilkaya EA, Gupta SM. Impact of different disassembly line balancing algorithms on the performance of dynamic kanban system for disassembly line, in: Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V, Boston, MA, October 2324, 2005. p. 10310.
40. S.M. Gupta, and Y.A.Y. Al-Turki An algorithm to dynamically adjust the number of kanbans in a stochastic processing times and variable demand environment Production Planning and Control 8 2 1997 133 141
41. Udomsawat G, Gupta SM, Kamarthi SV. A multi-kanban model for disassembly. In: Proceedings of the 2003 Northeast decision sciences institute conference. Providence, RI, March 2729, 2003. p. 16971.
42. Udomsawat G, Gupta SM, Al-Turki YAY. Multi-kanban model for disassembly line with demand fluctuation. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing III. Providence, RI, October 2930, 2003. p. 8593.
43. G. Udomsawat, and S.M. Gupta Multikanban system for disassembly line S.M. Gupta, A.J.D. Lambert, Environment conscious manufacturing 2008 CRC Press Boca Raton, FL 311 330
44. Udomsawat G, Gupta SM. Multi-kanban mechanism for appliance disassembly. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing V. Boston, MA, October 2324, 2005. p. 3041.
45. Udomsawat G, Gupta SM. Multi-kanban in disassembly line with component-discriminating demand. In: Proceedings of the 2005 Northeast decision sciences institute conference. Philadelphia, PA, March 30April 1, 2005.
46. Udomsawat G, Gupta SM. The effect of sudden server breakdown on the performance of a disassembly line. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing V. Boston, MA, October 2324, 2005. p. 93102.
47. Udomsawat G, Gupta SM. Controlling disassembly line with multi-kanban system. In: Proceedings of the SPIE international conference on environmentally conscious manufacturing VI. Boston, MA, October 13, 2006. p. 4253.
48. Scheidt L, Shuqiang Z. An approach to achieve reusability of electronic modules, in: Proceedings of the IEEE International Symposium on Electronics and the Environment, San Francisco, CA, May 24 1994, pp. 331336.
49. Karlsson B. A distributed data processing system for industrial recycling, in: Proceedings of 1997 IEEE Instrumentation and Measurement Technology Conference, Ottawa, Canada, May 1921, 1997, pp. 197200
50. Karlsson, B. Fuzzy handling of uncertainty in industrial recycling, in: Proceedings of 1998 IEEE Instrumentation and Measurement Technology Conference, St. Paul, MN, May 1821, 1998, pp. 832836.
51. Klausner M, Grimm WM, Hendrickson C, Horvath A. Sensor-based data recording of use conditions for product takeback, in: Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, Chicago, IL, May 46 1998, pp. 138143.
52. Klausner M, Grimm WM, Horvath A. Integrating product takeback and technical service, in: Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment, Danvers, MA, May 1113, 1999, pp. 4853.
53. E.M. Petriu, N.D. Georganas, D.C. Petriu, D. Makrakis, and V.Z. Groza Sensor-based information appliances IEEE Instrumentation & Measurement Magazine 3 4 2000 31 35
54. Cheng FT, Huang GW, Chen CH, Hung MH. A generic embedded device for retrieving and transmitting information of various customized applications, in: Proceedings of the 2004 IEEE International Conference on Robotics and Automation, New Orleans, LA, April 26May 1, 2004, pp. 978983.
55. X. Yang, P. Moore, and S.K. Chong Intelligent products: from lifecycle data acquisition to enabling product-related services Computers in Industry 60 3 2009 184 194
56. S. Vadde, S.V. Kamarthi, S.M. Gupta, and I. Zeid Product life cycle monitoring via embedded sensors S.M. Gupta, A.J.D. Lambert, Environment conscious manufacturing 2008 CRC Press Boca Raton, FL 91 103
57. Simon M, Pu J, Moore PR. The whiteboxcapturing and using product life cycle data. In: Proceedings of the 5th CIRP seminar on life cycle design. Stockholm, Sweden, 1998. p. 16170.
58. Moore PR, Pu J, Xie C, Simon M, Bee G. Life cycle data acquisition methods and devices. In: Proceedings of the 7th mechatronics forum international conference, Mechatronics, 2000, Atlanta, Georgia, September 68, 2000.
59. Simon M, Bee G, Moore P, Jun-Sheng P, Changwen X. Life cycle data acquisition unit-design, implementation, economics and environmental benefits. In: Proceedings of the 2000 IEEE international symposium on electronics and the environment. San Francisco, CA, May 810, 2000. p. 2849.
60. Weber P. Towards easy-to-communicate and transparent LCA data: application of life cycle design structure matrix. In: Proceedings of the 7th CIRP international seminar on life cycle engineering. Tokyo, Japan, 2000. p. 529.
61. Seliger G, Buchholz A, Grudzein W, Multiple usage phases by component adaptation. In: Proceedings of the 9th CIRP international seminar on life cycle engineering. Erlangen, Germany, 2002. p. 4754.
62. J Wallaschek, S Wedman, and W Wickord Lifetime observer: an application of mechatronics in vehicle technology International Journal of Vehicle Design 28 123 2002 121 130
63. Ni J, Lee J, Djurdjanovic D. Watchdog: information technology for proactive product maintenance and its implications to ecological product re-use. In: Proceedings of the symposium on ecological manufacturing 2003. p. 10110
64. G.G. Meyer, K. Frmling, and J. Holmstrm Intelligent products: a survey Computers in Industry 60 3 2009 137 148
65. C. Liu, X.F. Zha, Y. Miao, and J. Lee Internet server controller based intelligent maintenance system for information appliance products International Journal of Knowledge Based Intelligent Engineering Systems 9 2 2005 137 148
66. J.W. Bruce, and L.A. Hathcock Maintenance and monitoring object models for high-availability network appliances IEEE Transactions on Consumer Electronics 50 2 2004 472 477
67. C.F. Tsai, and H.C. Wu MASSIHN: a multi-agent architecture for intelligent home network service IEEE Transactions on Consumer Electronics 48 3 2002 505 514
68. Mazhar MI, Kara S, Kaebernick H. Reusability assessment of components in consumer productsa statistical and condition monitoring data analysis strategy. In: Proceedings of the 4th Australian LCA Conference, Sydney, Australia, February 2325, 2005.
69. M.I. Mazhar, S. Kara, and H. Kaebernick Remaining life estimation of used components in consumer products: Life cycle data analysis by Weibull and artificial neural networks Journal of Operations Management 25 6 2007 1184 1193
70. M.A. Herzog, T. Marwala, and P.S. Heyns Machine and component residual life estimation through the application of neural networks Reliability Engineering & System Safety 94 2 2009 479 489
71. M. Klausner, W.M. Grimm, and C. Hendrickson Reuse of electric motors in consumer products Journal of Industrial Ecology 2 2 1998 89 102
72. M. Simon, G. Bee, P. Moore, J.-S. Pu, and C. Xie Modelling of the life cycle of products with data acquisition features Computers in Industry 45 2 2001 111 122
73. G. Udomsawat, and S.M. Gupta Multikanban system for disassembly line S.M. Gupta, A.J.D. Lambert, Environment conscious manufacturing 2008 CRC Press Boca Raton, FL 311 330
74. H.K. Aksoy, and S.M. Gupta Buffer allocation plan for a remanufacturing cell Computers & Industrial Engineering 48 3 2005 657 677
75. M.S. Phadke Quality engineering using robust design 1989 Prentice Hall New Jersey
76. D.W. Kelton, R.P. Sadowski, and D.A. Sadowski Simulation with arena 4th ed. 2007 McGraw-Hill New York