Fracture and interfacial delamination origins of bilayer ceramic composites for dental restorations

Journal of the European Ceramic Society

Volumn 30, Issue 6, 2010, Pages 1297-1305

  Liu, Yihong ^a   Feng, Hailan ^a   Bao, Yiwang ^b   Qiu, Yan ^b   Xing, Ning ^c   Shen, Zhijian ^d  

^a PEKING UNIVERSITY SCHOOL AND HOSPITAL OF STOMATOLOGY   (China)

^b CHINA BUILDING MATERIALS ACADEMY   (China)

^c China National Building Materials Group Corporation   (China)

^d STOCKHOLM UNIVERSITY   (Sweden)

Author keywords

Biomedical applications; Composites; Failure analysis; Interfaces; Strength

Indexed keywords

ALUMINA-BASED COMPOSITES; ARGON ION BEAM; BI-LAYER; BILAYER COMPOSITES; BIOMEDICAL APPLICATIONS; CERAMIC COMPOSITES; CORE INTERFACES; DENTAL RESTORATIONS; FINE POLISHING; FINITE ELEMENT ANALYSIS; FLEXURAL STRENGTH; INTERFACIAL DELAMINATION; NUMERICAL SIMULATION; POLISHING TECHNIQUES; R VALUE; SCANNING ELECTRON MICROSCOPE; THERMAL DAMAGE; THICKNESS RATIO; THREE-POINT BENDING TEST;

ARGON; BENDING STRENGTH; COMPUTER SIMULATION; DELAMINATION; FAILURE ANALYSIS; FILLING; FINITE ELEMENT METHOD; FRACTOGRAPHY; FRACTURE; FRACTURE MECHANICS; PHYSICAL PROPERTIES; POLISHING; PORCELAIN; QUALITY ASSURANCE; SAFETY FACTOR; SCANNING ELECTRON MICROSCOPY; STEEL SHEET; VENEERS; YTTRIUM ALLOYS; ZIRCONIA;

DENTAL COMPOSITES;

EID: 75949101282     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2009.11.019     Document Type: Article

References (25)

1. Rekow D., and Thompson V.P. Near-surface damage-a persistent problem in crowns obtained by computer-aided design and manufacturing. J. Eng. Med. 219 (2005) 233-243
2. Steyern P.V., Ebbesson S., Holmgren J., Haag P., and Nilner K. Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermo cycling. J. Oral Rehabil. 33 (2006) 682-689
3. Aboushelib M.N., Kleverlaan C.J., and Feilzer A.J. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics. Dent. Mater. 22 (2006) 857-863
4. Faga M.G., Guicciardi S., Esposito L., Bellosi A., and Pezzotti G. Alumina/alumina and alumina-zirconia/alumina-zirconia joints through glass interlayers, microstructure, mechanical properties and residual stresses. Adv. Eng. Mater. 7 (2005) 535-540
5. Isgrò G., Wang H., Kleverlaan C.J., and Feilzer A.J. The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs. Dent. Mater. 21 (2005) 649-655
6. DeHoff P.H., Barrett A.A., Lee R.B., and Anusavice K.J. Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries. Dent. Mater. 24 (2008) 744-752
7. Hermann I., Bhowmick S., and Lawn B.R. Role of core support material in veneer failure of brittle layer structures. J. Biomed. Mater. 82B (2007) 115-121
8. Fleming G.J.P., El-Lakwah S.F.A., Harris J.J., and Marquis P.M. The effect of core: dentin thickness ratio on the bi-axial flexure strength and fracture mode and origin of bilayer dental ceramic composites. Dent. Mater. 21 (2005) 164-172
9. Thompson G.A. Influence of relative layer height and testing method on the failure mode and origin in a bilayer dental ceramic composite. Dent. Mater. 16 (2000) 235-243
10. White S.N., Miklus V.G., McLaren E.A., Lang L.A., and Caputo A.A. Flexural strength of a layered zirconia and porcelain dental all-ceramic system. J. Prosthet. Dent. 94 (2005) 125-131
11. Isgrò G., Pallav P., Van der Zel J.M., and Feilzer A.J. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J. Prosthet. Dent. 90 (2003) 465-473
12. Aboushelib M.N., Jager N., Kleverlaan C.J., and Feilzer A.J. Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems. Dent. Mater. 23 (2007) 952-959
13. Lawn B.R. Fracture of Brittle Solids (1993), Cambridge University Press, Cambridge
14. Guazzato M., Proos K., Quach L., and Swain M.V. Strength, reliability and mode of fracture of bilayer porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 25 (2004) 5045-5052
15. Imanishi A., Nakamura T., and Ohyama T. 3D Finite element analysis of all-ceramic posterior crowns. J. Oral. Rehabil. 30 (2003) 818-822
16. Kou W., Kou S., Liu H., and Sjögren G. Numerical modeling of the fracture process in a three-unit all-ceramic fixed partial denture. Dent. Mater. 23 (2007) 1042-1049
17. Lin P., Wong Robina H.C., Chau K.T., and Tang C.A. Multi-crack coalescence in rock-like material under uniaxial and biaxial loading. Key Eng. Mater. 183-187 (2000) 809-814
18. Wang D.G., Yang J.Y., Li L.C., and Jiang W. Numerical simulation of short cracks in fiber-reinforced ceramics. Key Eng. Mater. 324-325 (2006) 947-950
19. In: Sheppard L.M., and Ketron L. (Eds). Ceramic Source'90, vol. 5. Technical Data. Annual Source Book (1990), Amer. Ceram. Soc. Inc.
20. Cui J., Chen Y.F., Chao Y.L., Chen C.X., Ou J., Sui L., and Zhang W.Q. Bi-axial flexure strength, weibull modulus and fracture mode of alumina glass-infiltrated core/veneer ceramic composites. Key Eng. Mater. 353-358 (2007) 1556-1559
21. Kondo N., Suzuki Y., and Ohji T. Super plastic sinter-forging of silicon nitride with anisotropic microstructure formation. J. Am. Ceram. Soc. 82 (1999) 1067-1069
22. In: Schneider S.J. (Ed). Engineered Materials Handbook, vol. 4, Ceramics and Glasses (1991), ASM International, Materials Park, OH
23. Hsueh C.H., Thompson G.A., Jadaan O.M., Wereszczak A.A., and Becher P.F. Analyses of layer-thickness effects in bilayer dental ceramics subjected to thermal stresses and ring-on-ring tests. Dent. Mater. 24 (2008) 9-17
24. Lawn B., Bhowmick S., Bush M.B., Qasim T., Rekow E.D., and Zhang Y. Failure modes in ceramic-based layer structures: a basis for materials. J. Am. Ceram. Soc. 90 (2007) 1671-1683
25. Hermnn I., and Bhowmick S. Competing fracture modes in brittle materials subject to concentrated cyclic loading in liquid environments: trilayer structures. J. Mater. Res. 21 (2006) 512-521