Analyses of layer-thickness effects in bilayered dental ceramics subjected to thermal stresses and ring-on-ring tests

Dental Materials

Volumn 24, Issue 1, 2008, Pages 9-17

  Hsueh, C H ^a   Thompson, G A ^b   Jadaan, O M ^c   Wereszczak, A A ^a   Becher, P F ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b US Army Dental and Trauma Research Detachment   (United States)

^c UNIVERSITY OF WISCONSIN PLATTEVILLE   (United States)

Author keywords

Biaxial flexure test; Bilayer; Dental ceramics; Failure origin; Stress distribution

Indexed keywords

FINITE ELEMENT METHOD; STRESS CONCENTRATION; TENSILE TESTING; THERMAL STRESS; THERMOMECHANICAL TREATMENT;

BIAXIAL FLEXURE TESTS; BILAYERED DENTAL CERAMICS; BILAYERS; DENTAL CERAMICS; FAILURE ORIGIN; LAYER THICKNESS; THERMOMECHANICAL PROPERTIES;

DENTAL MATERIALS;

IN CERAM ALUMINA; IN-CERAM ALUMINA; UNCLASSIFIED DRUG; VITADUR ALPHA;

ARTICLE; DENTAL CARE; DENTURE; FINITE ELEMENT ANALYSIS; HEAT; MATERIALS TESTING; METHODOLOGY; PLIABILITY; SURFACE PROPERTY; TENSILE STRENGTH; TOOTH PROSTHESIS; TRANSITION TEMPERATURE;

DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; DENTAL VENEERS; FINITE ELEMENT ANALYSIS; HEAT; MATERIALS TESTING; PLIABILITY; SURFACE PROPERTIES; TENSILE STRENGTH; TRANSITION TEMPERATURE;

EID: 37049008682     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.12.009     Document Type: Article

References (34)

1. Lawn B.R., Deng Y., and Thompson V.P. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent 86 (2001) 495-510
2. White S.N., Caputo A.A., Vidjak F.M.A., and Seghi R.R. Moduli of rupture of layered dental ceramics. Dent Mater 10 (1994) 52-58
3. Molin M.K., Karlsson S.L., and Kristiansen M.S. Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater 12 (1996) 245-249
4. Zao D.L., Botsis J., and Drummond J.L. Fracture studies of selected dental restorative composites. Dent Mater 13 (1997) 198-207
5. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent Mater 20 (2004) 441-448
6. Kelly J.R. Perspectives on strength. Dent Mater 11 (1995) 103-110
7. Zeng K.Y., Oden A., and Rowcliffe D. Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont 11 (1998) 183-189
8. Thompson G.A. Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite. Dent Mater 16 (2000) 235-243
9. Higgs W.A.J., Lucksanasombool P., Higgs R.J.E.D., and Swain M.V. Evaluating acrylic and glass-ionomer cement strength using the biaxial flexure test. Biomater 22 (2001) 1583-1590
10. Bhamra G., Palin W.M., and Fleming G.J.P. The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material. J Dent 30 (2002) 153-160
11. Isgrò G., Pallav P., van der Zel J.M., and Feilzer A.J. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 90 (2003) 465-473
12. Guazzato M., Proos K., Quach L., and Swain M.V. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 25 (2004) 5045-5052
13. Thompson G.A. Determining the slow crack growth parameter and Weibull two-parameter estimates of bilaminate disks by constant displacement-rate flexural testing. Dent Mater 20 (2004) 51-62
14. Addison O., and Fleming G.J.P. The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material. Dent Mater 20 (2004) 286-292
15. Vitman F.F., and Pukh V.P. A method for determining the strength of sheet glass. Zavod Lab 29 (1963) 863-867
16. Kirstein A.F., and Woolley R.M. Symmetrical bending of thin circular elastic plates on equally spaced point supports. J Res Natl Bur Stand 71C (1967) 1-10
17. Wachtman J.B., Capps W., and Mandel J. Biaxial flexure tests of ceramic substrates. J Mater 7 (1972) 188-194
18. Ritter J.E., Jakus K., Batakis A., and Bandyopadhyay N. Appraisal of biaxial strength testing. J Non-Cryst Solids 38/39 (1980) 419-424
19. Shetty D.K., Rosenfield A.R., McGuire P., Bansal G.K., and Duckworth W.H. Biaxial flexure tests for ceramics. Am Ceram Soc Bull 59 (1980) 1193-1197
20. ASTM C 1499-05. Standard test method for monotonic equibiaxial flexural strength of advanced ceramics at ambient temperature (2005), ASTM International, West Conshohocken, Pennsylvania
21. Hsueh C.H., Lance M.J., and Ferber M.K. Stress distributions in thin bilayer discs subjected to ball-on-ring tests. J Am Ceram Soc 88 (2005) 1687-1690
22. Hsueh C.H., Luttrelll C.R., and Becher P.F. Analyses of multilayered dental ceramics subjected to biaxial flexure tests. Dent Mater 22 (2006) 460-469
23. Hsueh C.H., Luttrelll C.R., and Becher P.F. Modeling of multilayered disks subjected to biaxial flexure tests. Int J Solids Struct 43 (2006) 6014-6025
24. Hsueh C.H., and Evans A.G. Residual stresses in metal/ceramic bonded strips. J Am Ceram Soc 68 (1985) 241-248
25. Hsueh C.H. Modeling of elastic deformation of multilayers due to residual stresses and external bending. J Appl Phys 91 (2002) 9652-9656
26. Roark R.J., and Young W.C. Formulas for stress & strain. 5th ed (1986), McGraw-Hill, New York pp. 377-9
27. Timoshenko S., and Woinowsky-Krieger S. Theory of plates and shells (1959), McGraw-Hill, New York
28. Kelly J.R., Tesk J.A., and Sorensen J.A. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 74 (1995) 1253-1258
29. Käse H.R., Tesk J.A., and Case E.D. Elastic constants of two dental porcelains. J Mater Sci 20 (1985) 524-531
30. Fischer H., Hemelik M., Telle R., and Marx R. Influence of annealing temperature on the strength of dental glass ceramic materials. Dent Mater 21 (2005) 671-677
31. Rizkalla A.S., and Jones D.W. Mechanical properties of commercial high strength ceramic core materials. Dent Mater 20 (2004) 207-212
32. Hsueh C.H., and Lee S. Modeling of elastic thermal stresses in two materials joined by a graded layer. Compos B 34 (2003) 747-752
33. Hsueh C.H., DeJonghe L.C., and Lee C.S. Modelling of thermal stresses in joining two layers with multi- and graded-interlayers. J Am Ceram Soc 89 (2006) 251-257
34. Fleming G.J.P., El-Lakwah S.F.A., Harris J.J., and Marquis P.M. The influence of interface roughness on bilayered ceramic specimen performance. Dent Mater 20 (2004) 142-149