Near-surface damage - A persistent problem in crowns obtained by computer-aided design and manufacturing

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 219, Issue 4, 2005, Pages 233-243

  Rekow, D ^a   Thompson, V P ^a  

^a NEW YORK UNIVERSITY   (United States)

Author keywords

Ceramics; Computer aided design and manufacture (CAD CAM); Damage; Dental crowns; Fracture; Fracture mechanisms; Yttria stabilized tetragonal zirconia polycrystals (Y TZP)

Indexed keywords

CERAMIC MATERIALS; COMPUTER AIDED DESIGN; COMPUTER AIDED MANUFACTURING; DENTAL PROSTHESES; FAILURE (MECHANICAL); FATIGUE OF MATERIALS; FRACTURE MECHANICS; POLYCRYSTALS; STRENGTH OF MATERIALS; STRESSES; SURFACES; ZIRCONIA; COMPUTER CONTROL; FRACTURE; MANUFACTURE; YTTRIA STABILIZED ZIRCONIA; YTTRIUM ALLOYS;

DENTAL CROWNS; NEAR-SURFACE DAMAGE; ROBUST DENTAL SYSTEMS; YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS;

BIOMEDICAL ENGINEERING; COMPUTER AIDED DESIGN;

BIOMEDICAL AND DENTAL MATERIALS;

CERAMICS; CHEMISTRY; COMPUTER AIDED DESIGN; DENTAL BONDING; DENTAL SURGERY; EQUIPMENT; HUMAN; MATERIALS; MECHANICAL STRESS; METHODOLOGY; PROSTHESIS; REVIEW; SURFACE PROPERTY; TOOTH CROWN; TOOTH PROSTHESIS;

CERAMICS; COMPUTER-AIDED DESIGN; CROWNS; DENTAL BONDING; DENTAL MATERIALS; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; EQUIPMENT FAILURE ANALYSIS; HUMANS; MANUFACTURED MATERIALS; PROSTHESIS FITTING; STRESS, MECHANICAL; SURFACE PROPERTIES;

CAD/CAMS; CERAMICS; DAMAGE; DENTAL CROWNS; FRACTURE MECHANISMS; YTTRIA STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS;

EID: 22944491129     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/095441105X9363     Document Type: Article

References (88)

1. Erdman, A. G. and Riley, D. R. Computer-aided design and manufacturing - CAD/CAM. In Mechanical Design and Systems Handbook (Ed. H. A. Rothbart), 1985, pp. 16.1-16.44 (McGraw-Hill, New York).
2. Moermann, W. H. Symposium review. In Proceedings of the International Symposium on Computer Restorations: State of the Art of the CEREC-Method, 1991, pp. 17-21 (Quintessence Books, Chicago, Illinois).
3. Duret, F. and Preston, J. D. CAD/CAM imaging in dentistry. Curr. Opinions Dentistry, 1991, 1(2), 150-154.
4. Rekow, D. Computer-aided design and manufacturing in dentistry: a review of the state of the art. J. Prosthetic Dentistry, 1987, 58(4), 512-516.
5. Williams, A. G. and Rekow, D. The Switzerland and Minnesota developments in CAD/CAM. J. Dent. Practise Adm., 1987, 4(2), 50-55.
6. Duret, F., Blouin, J. L., and Duret, B. CAD-CAM in dentistry. J. Am. Dent. Assoc., 1988, 117(6), 715-720.
7. Stachniss, V. and Stoll, R. Computer technologies in dentistry computerized restorations: Cerec and other methods. In Proceedings of the International Symposium on Computer Restorations: State of the Art of the CEREC-Method, 1991, pp. 33-50 (Quintessence Books, Chicago, Illinois).
8. Tinschert, J., Natt, G., Hassenpflug, S., and Spiekermann, H. Status of current CAD/CAM technology in dental medicine. Int. J. Comput. Dentistry, 2004, 7(1), 25-45.
9. Raigrodski, A. J. Contemporary all-ceramic fixed partial dentures: a review. Dent. Clin. North. Am., 2004, 48(2), 531-544.
10. McLaren, E.A. and Terry, D. A. CAD/CAM systems, materials, and clinical guidelines for all-ceramic crowns and fixed partial dentures. Compendium of Continuing Education in Dentistry, 2002, 23(7), 637-641, 644, 646 passim; quiz, 654.
11. Grossman, D. G. Structure and physical properties of DICOR/MGC glass-ceramic. In Proceedings of the International Symposium on Computer Restorations: State of the Art of the CEREC-Method, 1991, pp. 103-166 (Quintessence Books, Chicago, Illinois).
12. Holand, W., Schweiger, M., Frank, M., and Rheinberger, V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J. Biomed. Mater Res., 2000, 53 (4), 297-303.
13. Hornberger, H., Marquis, P. M., Christiansen, S., and Strunk, H. P. Microstructure of a high strength alumina glass composite. J. Mater Res., 1996, 11, 855-858.
14. Probster, L. and Diehl, J. Slip-casting alumina ceramics for crown and bridge restorations. Quintessence Int., 1992, 23 (1), 25-31.
15. McLaren, E. A. and White, S. N. Glass-infiltrated zirconia/ alumina-based ceramic for crowns and fixed partial dentures. Pract. Periodontics Aesthetic Dentistry., 1999, 11(8), 985-994.
16. Guazzato, M., Albakry, M., Ringer, S. P., and Swain, M. V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. zirconia-based dental ceramics. Dent. Mater., 2004, 20(5), 449-456.
17. Anon. Dental market overview. www.nobelbiocare.com/global/en/ About/DentalMarket/default.htm, last accessed October 2004.
18. Peterson, I. M., Wuttiphan, S., Lawn, B. R., Chyung, K. Role of microstructure on contact damage and strength degradation of micaceous glass-ceramics. Dent. Mater., 1998, 14(1), 80-89.
19. Denry, I. L, Mackert Jr, J. R., Holloway, J. A., and Rosenstiel, S. F. Effect of cubic leucite stabilization on the flexural strength of feldspathic dental porcelain. J. Dent. Res., 1996, 75(12), 1928-1935.
20. Kelly, J. R. Clinically relevant approach to failure testing of all-ceramic restorations. J. Prosthetic Dentistry, 1999, 81 (6), 652-661.
21. Lawn, B., Deng, Y., Miranda, P., Parares, A., Chai, H., and Kim, D.-K. Overview: damage in brittle layers structures from concentrated loads. J. Mater Res., 2002, 17(12), 3019-3036.
22. Lawn, B. R. Indentation of ceramics with spheres: a century after Hertz. J. Am. Ceram. Soc., 1998, 81, 1977-1994.
23. Deng, Y. Failure modes and materials design for biomechanical layer structures. PhD thesis, University of Maryland, College Park, Maryland, USA, 2003.
24. Deng, Y., Miranda, P., Pajares, A., Guiberteau, F., and Lawn, B. R. Fracture of ceramic/ceramic/polymer trilayers for biomechanical applications. J. Biomed. Mater Res. A, 2003, 67A(3), 828-833.
25. Kelly, J. R., Giordano, R., Pober, R., and Cima, M. J. Fracture surface analysis of dental ceramics: clinically failed restorations. Int. J. Prosthodontics, 1990, 3(5), 30-40.
26. Guazzato, M., Proos, K., Sara, G., and Swain, M. V. Strength, reliability, and mode of fracture of bi-layered porcelain/core ceramics. Int. J. Prosthodontics, 2004, 17(2), 142-149.
27. Qasim, T., Bush, M. B., Hu, X., and Lawn, B. R. Contact damage in brittle coating layers: influence of surface curvature. J. Biomed. Mater Res. B, (in press).
28. Jahanmir, S., Ruff, A. W., and Peterson, M. B. Ceramic Machining: Assessment of Current Practice and Research Needs in the Jnited States, 1992 (National Institute of Standards and Technology, Gaithersburg, Maryland).
29. Zhang, G., Cao, Y., and Le, D. T. Assessment of machining performance of dental ceramics. Trans. North Am. Mfg Res. Inst. SME, 1998, 26, 105-110.
30. Rekow, E. D. Relation of microstructure and milling conditions in glass ceramics for dental restorations. In Proceedings of the CIMTEC World Forum on New Materials: Symposium XI - Materials in Clinical Applications, Florence, Italy, 1998, pp. 301-309. (Techna Sir, Florence)
31. Xu, H. H. K. and Jahanmir, S. Effect of microstructure on damage tolerance in grinding dental glass ceramics. J. Mater Res., 1998, 13(8), 2231-2236.
32. Sindel, J., Petschelt, A., Grellner, F., Dierken, C., and Greil, P. Evaluation of subsurface damage in CAD/CAM machined dental ceramics. J. Mater Sci. Mater Medicine, 1998, 9(5), 291-295.
33. Coli, P. and Karlsson, S. Fit of a new pressure-sintered zirconium dioxide coping. Int. J. Prosthodontics, 2004, 17 (1), 59-64.
34. Sindel, J., Frankenberger, R., Kramer, N., and Petschelt, A. Crack formation of all-ceramic crowns dependent on different core build-up and luting materials. J. Dentistry, 1999, 27(3), 175-181.
35. Luthardt, R. G., Holzhuter, M. S., Rudolph, H., Herold, V., and Waiter, M. H. CAD/CAM-machining effects on Y-TZP zirconia. Dent Mater., 2004, 20(7), 655-662.
36. Bifano, T. G., Dow, T. A., and Scattergood, R. O. Ductile-regime: a new technology for machining brittle materials. Trans. ASME J. Engng Industry, 1991, 113, 184-189.
37. Yin, L. and Huang, H. Ceramic response to high speed grinding. Machining Sci. Technol., 2004, 8(1), 21-37.
38. Schmidt, C. and Weigl, P. Machinability of IPS Empress 2 framework ceramic J. Biomed. Mater. Res., 2000, 53(4), 348-352.
39. Dong, X., Yin, L., Jahanmir, S., Ives, L. K., and Rekow, E. D. Abrasive machining of glass-ceramics with a dental handpiece. Machining Sci. Technol., 2000, 4(2), 209-233.
40. Yin, L., Jahanmir, S., and Ivels, L. K. Abrasive machining of procelain and zirconia with a dental handpiece. Wear, 2003, 255, 975-989.
41. Yin, L., Ives, L. K., Jahanmir, S., Rekow, E. D., and Romberg, E. Abrasive machining of glass infiltrated alumina with diamond burs. Machining Sci. Technol., 2001, 5(1), 43-61.
42. Jahanmir, S., Xu, H. H. K., and Ives. L. K. Mechanisms of Materials Removal in Abrasive Machining, 1999 (Marcel Dekker, New York).
43. Xu, H. H. K., Jahanmir, S., and Wang, Y. Effect of grain size scratch interactions and material removal in alumina. J. Am. Ceram. Soc., 1995, 78(4), 881-891.
44. Xu, H. H. K. and Jahanmir, S. Microstructure and material removal in scatching of alumina. J. Mater. Sci., 1995 30, 2335-2247.
45. Xu, H. H. K., Jahanmir, S., and Ives, L. K. Effect of grinding on strength of tetragonal zirconia and zirconia-toughened alumina. Machining Sci. Technol., 1997, 1(1), 49-66.
46. Boettger, J. M., Ker, M. K., Shore, P., and Stephenson, D. J. Influence of ductile mode grinding on the strength of silicon based ceramics. In Proceedings of the International Conference on Machining of Advanced Materials, NIST Special Publication 847, 1993, pp. 353-358 (National Institute of Standards and Technology, Gaithersburg, Maryland).
47. Mittell, R. N., Porter, T. M., and Rowe, G. W. Lubrication with cutting and grinding emulsions. Lubric. Engng, 1984, 40 (3), 160-165.
48. Golini, D. and Jacobes, S. J. Physics of loose abrasive microgrinding. Appl. Optics, 1991, 3, 2761-2777.
49. Jahanmir, S. and Liang, H. Chemomechanical effects of boric acid in core-drilling of alumina. In Proceedings of the International Conference on Machining of Advanced Materials, NIST Special Publication 847, 1993, pp. 101-113 (National Institute of Standards and Technology, Gaithersburg, Maryland).
50. Flanders, L. A., Quinn, J. B., Wilson Jr, O. C., and Lloyd, I. K. Scratch hardness and chipping of dental ceramics under different environments. Dent. Mater., 2003, 19(8), 716-724.
51. von Fraunhofer, J. A. and Siegel, S. C. Enhanced dental cutting through chemomechanical effects. J. Am. Dent. Assoc., 2000, 131(10), 465-469.
52. Kern, M. and Thompson, V. P. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J. Prosthetic Dentistry, 1995, 73, 240-249.
53. Kern, M. and Wegner, S. M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent. Mater., 1998, 14, 64-71.
54. Blixt, M., Adamczak, E., Linden, L. A., Oden, A., and Arvidson, K. Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements. Int. J. Prosthetics, 2000, 13, 131-135.
55. Saygili, G. and Sahmali, S. Effect of ceramic surface treatment on the shear bond strengths of two resin luting agents to all-ceramic materials. J. Oral. Rehabil., 2003, 30, 758-764.
56. Zhang, Y., Lawn, B. R., Rekow, E. D., and Thompson, V. P. Effect of sandblasting on the long-term performance of dental ceramics. J. Biomed. Mater. Res., 2004, 71B, 381-386.
57. Zhang, Y. and Lawn, B. Long-term strength of ceramics for biomedical applications. J. Biomed. Mater. Res. B, 2004, 69 (2), 166-172.
58. Gibbs, C. H., Anusavice, K. J., Young, H. M., Jones, J. S., and Esquivel-Upshaw, J. F. Maximum clenching force of patients with moderate loss of posterior tooth support: a pilot study. J. Prosthetic Dentistry, 2002, 88(5), 498-502.
59. DeLong, R. and Douglas, W. H. Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control. J. Dent. Res., 1983, 62(1), 32-36.
60. White, S. N., Zhao, X. Y., Zhaokun, Y., and Li, Z. C. Cyclic mechanical fatigue of a feldspathic dental porcelain. Int. J. Prosthodontics, 1995, 8(5), 413-420.
61. Zhang, Y., Pajares, A., and Lawn, B. R. Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems. J. Biomed. Mater. Res. B, 2004, 71B(1), 66-71.
62. Sobrinho, L. C., Cattell, M. J., Glover, R. H., and Knowles, J. C. Investigation of the dry and wet fatigue properties of three all-ceramic crown systems. Int. J. Prosthodontics, 1998, 11 (3), 255-262.
63. Sobrinho, L. C., Glover, R. H., Knowles, J. G., and Cattell, M. J. Comparison of the wet and dry fatigue properties of all ceramic crowns. J. Mater. Sci. Mater. Med., 1998, 9(9), 517-521.
64. Zhang, Y. and Lawn, B. Long-term strength of clinically relevant ceramics. J. Biomed. Mater. Res., 2004 (submitted).
65. Lohbauer, U., Petschelt, A., and Greil, P. Lifetime prediction of CAD/CAM dental ceramics. J. Biomed. Mater. Res., 2002, 63(6), 780-785.
66. Chen, H. Y., Hickel, R., Setcos, J. G., and Kunzelmann, K. H. Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. J Prosthetic Dentistry, 1999, 82(4), 468-475.
67. Ohyama, T., Yoshinari, M., and Oda, Y. Effects of cyclic loading on the strength of all-ceramic materials. Int. J. Prosthodontics, 1999, 12(1), 28-37.
68. Myers, M. L., Ergle, I. W., Fairhurst, C. W., and Ringle, R. D. Fatigue failure parameters of IPS-Empress porcelain. Int. J. Prosthodontics, 1994, 7(6), 549-553.
69. Myers, M. L., Ergle, J. W., Fairhurst, C. W., and Ringle, R. D. Fatigue characteristics of a high-strength porcelain. Int. J. Prosthodontics, 1994, 7(3), 253-257.
70. Zhang, Y., Song, J.-K., and Lawn, B. Deep penetrating conical cracks in brittle layers from hydraulic cyclic contact. J. Biomed. Mater. Res., 2004 (submitted).
71. Kinney, J. H., Marshall, S. J., and Marshall, G. W. The mechanical properties of human dentin: a critical review and re-evaluation of the dental literature. Crit. Rev. Oral Biol. Medicine, 2003, 14(1), 13-29.
72. Azer, S. S., Drummond, J. L., Campbell, S. D., and El Moneim Zaki, A. Influence of core buildup material on the fatigue strength of an all-ceramic crown. J. Prosthetic Dentistry, 2001, 86 (6), 624-631.
73. Malament, K. A. and Socransky, S. S. Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: effect of luting agent and tooth or tooth-substitute core structure. J. Prosthetic Dentistry, 2001, 86(5), 511-519.
74. Malament, K. A., Socransky, S. S., Thompson, V., and Rekow, D. Survival of glass-ceramic materials and involved clinical risk: variables affecting long-term survival. Pract. Procedures Aesthetic Dentistry, 2003, Suppl., 5-11.
75. Huang, M., Thompson, V. P., Rekow, E. D., and Soboyejo, W. O. Water absorption induced cracks in resin-based composite supported ceramic layer structures. J. Biomed. Mater Res., 2004 (submitted).
76. Wolfart, S., Wegner, S. M., Al-Halabi, A., and Kern, M. Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation. Int. J. Prosthodontics, 2003, 16(6), 587-592.
77. Nakamura, T., Dei, N., Kojima, T., and Wakabayashi, K. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int. J. Prosthodontics, 2003, 16(3), 244-248.
78. Ferrari, M. Cement thickness and microleakage under Dicor crowns: an in vivo investigation. Int. J. Prosthodontics, 1991, 4 (2), 126-131.
79. Hirano, S. and Hirasawa, T. Compressive creep of posterior and anterior composite resins in water. Dent. Mater J., 1994, 13(2), 214-219.
80. Ferracane, J. L., Matsumoto, H., and Okabe, T. Time-dependent deformation of composite resins - compositional considerations. J. Dent. Res., 1985, 64(11), 1332-1336.
81. Valdyanathan, J. and Vaidyanathan, T. K. Flexural creep deformation and recovery in dental composites. J. Dentistry, 2001, 29(8) 545-551.
82. Huang, M., Niu, X., Shrotria, P., Thompson, V., Rekow, D., and Soboyejo, W. O. Contact damage of dental multilayers: viscous deformation and fatigue mechanisms. Trans. ASME, J. Engng Mater. Technol., 2004 (submitted).
83. Huang, M., Niu, X., and Soboyejo, W. O. Creep induced rate effects on radial cracks in multilayered structures. J. Mater Sci.: Mater. Medicine, 2004 (submitted).
84. Dozic, A., Kleverlaan, C. J., Meegdes, M., van der Zel, J., and Feilzer, A. J. The influence of porcelain layer thickness on the final shade of ceramic restorations. J. Prosthetic Dentistry, 2003, 90(6), 563-570.
85. Webber, B., McDonald, A., and Knowles, J. An in vitro study of the compressive load at fracture of Procera AllCeram crowns with varying thickness of veneer porcelain. J. Prosthetic Dentistry, 2003, 89(2), 154-160.
86. Harrington, Z., McDonald, A., and Knowles, J. An in vitro study to investigate the load at fracture of Procera AllCeram crowns with various thickness of occlusal veneer porcelain. Int. J. Prosthodontics, 2003, 16(1), 54-58.
87. Wakabayashi, N. and Anusavice, K. J. Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness. J. Dent. Res., 2000, 79(6), 1398-1404.
88. Miranda, P., Pajares, A., Guiberteau, F., Cumbrera, F., and Lawn, B. Contact fracture of brittle bilayer coatings on soft substrates. J. Mater Res., 2001, 16(1), 115-126.