The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin

Journal of Contemporary Dental Practice

Volumn 8, Issue 2, 2007, Pages 017-024

  El Araby, Alaa Morsy ^a,b   Talic, Yousef F ^c,d  

^a Alexandria University ^*  (Egypt)

^b Japanese Society of Dental Materials and Devices   (Japan)

^c KING SAUD UNIVERSITY   (Saudi Arabia)

^d Saudi Dental Society   (Saudi Arabia)

Author keywords

Dental adhesives; Shear bond strength; Thermocycling

Indexed keywords

DENTIN BONDING AGENT; POLYMETHACRYLIC ACID DERIVATIVE; PRIME & BOND NT; PROMPT L POP; PROMPT L-POP; RESIN; RESIN CEMENT; UNCLASSIFIED DRUG; XENO III;

ARTICLE; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL ETCHING; DENTAL SURGERY; DENTIN; ENAMEL; HEAT; HUMAN; METHODOLOGY; SHEAR STRENGTH;

COMPOSITE RESINS; DENTAL BONDING; DENTAL ENAMEL; DENTAL ETCHING; DENTAL STRESS ANALYSIS; DENTIN; DENTIN-BONDING AGENTS; HEAT; HUMANS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SHEAR STRENGTH; SMEAR LAYER;

EID: 33846937867     PISSN: None     EISSN: 15263711     Source Type: Journal    
DOI: 10.5005/jcdp-8-2-17     Document Type: Article

References (60)

1. Dumsha TC, Sydiskis RJ. Cytotoxcity testing of dentin bonding system. Oral Surg Oral Med Oral Pathol 1985;59:637-641.
2. Douglas WH. Clinical status of dentin bonding agents. J Dent 1989;17:209-215.
3. Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res 1955;34:849-853.
4. Swift EJ, Perdigao J, Heymann HO. Bonding to enamel and dentin: A brief history and state of the art. Quintessence Int 1995;26:95-110.
5. Fusayama T, Nakamura M, Kurosaki N, Iwaku M. Non-pressure adhesion of a new adhesive restorative resin. J Dent Res 1979;58:1364-1370.
6. Swift EJ, Bayne SC. Shear bond strength of a new one-bottle dentin adhesive. Am J Dent 1997;10:184-188.
7. Kanca J. Effect of resin primer solvents and surface wetness on resin composite bond strength to dentin. Am J Dent 1992;5:213-215.
8. Finger WJ, Fritz U. Laboratory evaluation of one-component enamel/dentin bonding agents. Am J Dent 1996;9:206-210.
9. Van Meerbeek B, Peumans M, Verschueren M, Gladys S, Braem M, Lambrechts P, Vanherle G. Clinical status of ten adhesive systems. J Dent Res 1994;73:1690-1702.
10. Swift EJ, Perdigao J, Wilder AD, Heymann HO, Sturdevant JR, Bayne SC. Clinical evaluation of two one-bottle dentin adhesives at three years. J Am Dent Assoc 2001;132:1117-1123.
11. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 1982;16:265-273.
12. Van Meerbeek B, Inokoshi S, Braern M, Lambrechts P, Vanherle G. Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res 1992;71:1530-1540.
13. Sano H, Hoshikawa T, Pereira PN, Kanemura N, Morigami M, Tagami J, Pashley DH. Long-term durability of dentin bonds made with a self-etching primer in vivo. J Dent Res 1999;78: 906-911.
14. Tay FR, Gwinnett AJ, Pang KM, Wei SHY. Variability in microleakage observed in a total-etch wet-bonding technique under different handling conditions. J Dent Res 1995;74:1168-1178.
15. Tay FR, Gwinnett AJ, Wei SHY. The over-wet phenomenon: an optical, micromorphological study of surface moisture in the acid-conditioned, resin-dentin interface. Am J Dent. 1996;9: 43-48.
16. Nakajima M, Sano H, Urabe I, Tagami J, Pashley DH. Bond strength of single-bottle dentin adhesives to caries-affected dentin. Oper Dent 2000;25: 2-10.
17. Øilo G, Austrheim EK. In vitro quality testing of dentin adhesives. Acta Odontol Scand 1993;51: 263-269.
18. Davidson CL, Abdalla AI, De Gee AJ. An investigation into the quality of dentin bonding systems for accomplishing a durable bond. J Oral Rehabil 1993;20: 291-300.
19. Miyazaki M, Sato M, Onose H, Moore BK. Influence of thermal cycling on dentin bond strength of two-step bonding systems. Am J Dent 1998;11:118-122.
20. Titley K, Caldwell R, Kulkarni G. Factors that affect the shear bond strength of multiple component and single bottle adhesives to dentin. Am J Dent. 2003;16: 120-124.
21. Hayakawa T, Kikutake K, Nemoto K. Influence of self etching primer treatment on the adhesion of resin composite to polished dentin and enamel. Dent Mater 1998; 14:99-105.
22. Prati C, Chersoni S, Mongiorgi R, Pashley DH. Resin-infiltrated dentin layer formation of new bonding systems. Oper Dent 1998; 23:185-194.
23. Hannig M, Reinhardt KJ, Bott B. Self-etching primer vs phosphoric acid: An alternative concept for composite-to-enamel bonding. Oper Dent 1999; 24 172-180.
24. Kanemura N, Sano H, Tagami J. Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces. J Dent 1999; 27:523-530.
25. Rosa BT, Perdigao J. Bond strengths of nonrinsing adhesives. Quintessence Int 2000; 31:353-358.
26. Frankenberger R, Perdigao J, Rosa BT, Lopes M. "No-bottle" vs "multi-bottle" dentin adhesives. A microtensile bond strength and morphological study. Dent Mater 2000; 17: 373-380.
27. Fritz UB, Diedrich P, Finger WJ. Self-etching primers: An alternative to the conventional acid etch technique. J Orofacial Orthop 2001; 62:238-245.
28. Pashley DH, Tay FR. Aggressiveness of contemporary self-etching adhesives. Part II: Etching effects on ground enamel. Dent Mater 2001; 17:430-444.
29. Bouillaguet S, Gysi P, Wataha JC, Ciucchi B, Cattani M, Godin C, Meyer JM. Bond strength of composite to dentin using conventional, one step, and self-etching adhesive systems. J Dent 2001; 29:55-61.
30. Tay F, Pasley DH. Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater 2001; 17:296-308.
31. Itou K, Torii Y, Takimura T, Chikami K, Ishikawa K, Suzuki K. Effect of priming time on tensile bond strength to bovine teeth and morphologic structure of interfaces created by self-etching primers. Int J Prosthodont 2001;14:225-230.
32. Soano K, Susuki S, Yokomichi R, Taira Y, Atsuta N. Evaluation of a novel dentin bonding system compared to commercial bonding system. J Dent 2004, 32:315-320.
33. Kiremitci A, Yalcin F, Gokalp S. Bonding to enamel and dentin using self-etching adhesive systems. Quintessence Int 2004; 35:5, 367-370.
34. Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res 1955; 34:849-853.
35. Bishara SE, Wald LV, Laffoon JF, Jakobsen JR. Effect of altering the type of enamel conditioner on the shear bond strength of a resin-reinforced glass ionomer adhesive. Am J Orthod Dentofacial Orthop 2000; 118:288-294.
36. Pashley DH. Dentin: A dynamic substrate - review. Scanning Microscopic 1989; 3:161-176.
37. Swift E Jr, Perdigão J, Heymann HO. Bonding to enamel and dentin: A brief history and state of the art. Quintessence Int 1995; 26: 95-110.
38. Van Meerbeeck E, Vargas M, Inoue S, Yoshida Y, Peumans M, Lambrechts P, Vanherle G. Adhesives and cements to promote preservation dentistry. Oper Dent 2001; 6: 119-144.
39. Tanumiharja M, Burrow MF, Tyas MJ. Microtensile bond strength of seven dentin adhesive system. Dent Mater 2000; 16:180-187.
40. Ramos RP, Chimello DT, Chinelatti MA, Nonaka T, Pécora JD, Palma RG. Effect of Er:YAG laser on bond strength to dentin of a self-etching primer and two single-bottle adhesive systems. Laser in Surgery and Medicine 2002; 31:164-170.
41. Oliveira SS, Pugach MK, Hilton JF, Watanabe LG, Marshall SJ, Marshall GW Jr. The influence of the dentin smear layer on adhesion: A self-etching primer vs. a total-etch system. Dent Mater 2003; 19(8):758-767.
42. Oberlander H, Friedl KH, Schmalz G. Bond strength of polyacid-modified resins using a new one step adhesives system. Oper Dent 2001; 26: 127-133.
43. Hannig M, Reinhardt KH, Bott B. Composite-to-dentin bond strength, micromorphology of the bonded dentin interface and marginal adaptation of class II composite resin restorations using self-etching primers. Oper Dent 2001; 26: 157-165.
44. Helvatjoglu-Antoniades M, Koliniotou-Kubia E, Dionyssopoulos P. The effect of thermal cycling on the bovine dentin shear bond strength of current adhesive systems. J Oral Rehab 2004; 32 (9):911-917.
45. Huang MS, Li MT, Huang FM, Ding SJ. The effect of thermocycling and dentine pre-treatment on the durability of the bond between composite resin and dentin. J Oral Rehab 2004; 31: 492-499.
46. Davidson Cl, de Gee AJ, Feilzer AJ. The competition between the composite-dentin bond strength and polymerization contraction stresses. J Dent Res 1984; 63:1396-1399.
47. Gottlieb EW, Retief DH, Jamison HC. Optimal concentration of phosphoric acid as an etching agent. Part I. tensile bond strength studies. J Prosthest Dent 1982; 48:48-51.
48. Gilpatrick RO, Rossa JA, Simonsen RJ. Resin to enamel bond strengths with various etching times. Quintessence Int 1991; 22:47-49.
49. Gwinnet AJ, Kanca JA. Micromorphology of the bonded dentin interface and its relationship to bond strength. Am J Dent 1992; 5:73-77.
50. Swift EJ, Cloe BC. Shear bond strengths of new enamel etchant. Am J Dent 1993; 6: 162-164.
51. Dentsply (2002) Xeno III Single Step Self-etching Adhesive Scientific Compendium. Detrey GmbH.
52. Kiremtçi A, Yalçin F, Gökalp S. Bonding to enamel and dentin using self-etching adhesives systems. Quintessence Int 2004; 35: 367-370.
53. Eliades GC. Dentin bonding systems. In: Vanherle G, Degrange M, Willems G (eds) State of the art in direct posterior filling materials and dentine bonding. Leuven Van der Poorten, 1993.
54. Perdigao J, Swift EJ Jr, Lopes GC. Effects of repeated use on bond strengths of one-bottle adhesives. Quintessence Int 1999; 30(12): 819-823.
55. Price RB, Derand T, Andreou P, Murphy D. The effect of two configuration factors, time, and thermal cycling on resin to dentin bond strengths. Biomater 2003;24: 1013-1021.
56. Crim GA, Garcia-Godoy F. Microleakage: The effect of storage and cycling duration. J Prosthet Dent. 1987;57: 574-576.
57. Burrow MF, Inokoshi S, Tagami J. Water sorption of several bonding resins. Am J Dent. 1999;12: 295-298.
58. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single-step adhesive permeable membranes. J Dent 2002; 30: 371-382.
59. Hashimoto M, Ohno H, Kaga M, Endo K, Sano H, Oguchi H. resin-tooth adhesive interfaces after long-term function. Am J Dent 2001;14:211-225.
60. Okuda M, Pereira PNR, Nakajima M, Tagami J. Relationship between nanoleakage and long-term durability of dentin bonds. Oper Dent 2001;26: 482-490.