Resistance of ten contemporary adhesives to resin-dentine bond degradation

Journal of Dentistry

Volumn 36, Issue 2, 2008, Pages 163-169

  Osorio, Raquel ^a   Pisani Proenca, Jatyr ^a   Erhardt, Maria Carolina G ^a   Osorio, Estrella ^a   Aguilera, Fátima S ^a   Tay, Franklin R ^b   Toledano, Manuel ^a  

^a UNIVERSITY OF GRANADA   (Spain)

^b MEDICAL COLLEGE OF GEORGIA   (United States)

Author keywords

Adhesion; Bond strength; Degradation; Dentine; Etch and rinse; Microtensile; Self etch

Indexed keywords

ALCOHOL; AQ BOND; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CLEARFIL SE BOND; DENTIN BONDING AGENT; ETCH&PRIME 3.0; FUTURABOND NR; MALEIC ACID DERIVATIVE; METHACRYLIC ACID DERIVATIVE; NON RINSE CONDITIONER; NON-RINSE CONDITIONER; PHOSPHATE; POLYMETHACRYLIC ACID DERIVATIVE; PRIME & BOND NT; PROMPT L POP; PROMPT L-POP; RESIN; RESIN CEMENT; RESULCIN AQUAPRIME; SINGLE BOND; SOLIST; UNCLASSIFIED DRUG; URETHAN; WATER;

ARTICLE; CHEMISTRY; DENTAL BONDING; DENTAL SURGERY; DENTIN; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; SCANNING ELECTRON MICROSCOPY; TEMPERATURE; TENSILE STRENGTH; TIME; ULTRASTRUCTURE;

BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; DENTAL BONDING; DENTAL RESTORATION, PERMANENT; DENTIN; DENTIN-BONDING AGENTS; ETHANOL; HUMANS; MALEATES; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; PHOSPHATES; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; STRESS, MECHANICAL; TEMPERATURE; TENSILE STRENGTH; TIME FACTORS; URETHANE; WATER;

EID: 38349051779     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2007.12.002     Document Type: Article

References (40)

1. Nikaido T., Kunzelmann K.H., Chen H., Ogata M., Harada N., Yamaguchi S., Cox C.F., Hickel R., and Tagami J. Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin. Dental Materials 18 (2002) 269-275
2. Kubo S., Yokota H., Sata Y., and Hayashi Y. Microleakage of self-etching primers after thermal and flexural load cycling. American Journal of Dentistry 14 (2001) 163-169
3. Hebling J., Pashley D.H., Tjäderhane L., and Tay F.R. Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. Journal of Dental Research 84 (2005) 741-746
4. Hashimoto M., Ohno H., Kaga M., Endo K., Sano H., and Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. Journal of Dental Research 79 (2000) 1385-1391
5. Eliades G., Vougiouklakis G., and Palaghias G. Heterogeneous distribution of single-bottle adhesive monomers in the resin-dentin interdiffusion zone. Dental Materials 17 (2001) 277-283
6. Tay F.R., and Pashley D.H. Have dentin adhesives become too hydrophilic?. Journal of Canadian Dental Association 69 (2003) 726-731
7. Nunes T.G., Ceballos L., Osorio R., and Toledano M. Spatially-resolved photopolymerization kinetics and oxygen inhibition in dental adhesives. Biomaterials 26 (2005) 1809-1817
8. Spencer P., Wang Y., Walker M.P., and Swafford J.D. Molecular structure of acid-etched dentin smear layers in situ study. Journal of Dental Research 80 (2001) 1802-1807
9. Yourtee D.M., Smith R.E., Russo K.A., Burmaster S., Cannon J.M., Eick J.D., et al. The stability of methacrylate biomaterials when enzyme challenged: kinetic and systematic evaluations. Journal of Biomedical Materials Research 57 (2001) 522-531
10. Toledano M., Osorio R., Osorio E., Aguilera F.S., Yamauti M., Pashley D.H., and Tay F. Durability of resin-dentin bonds: effects of direct/indirect exposure and storage media. Dental Materials 23 (2007) 885-892
11. Mazzoni A., Pashley D.H., Nishitani Y., Breschi L., Mannello F., Tjäderhane L., Toledano M., Pashley E.L., and Tay F.R. Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials 27 (2006) 4470-4476
12. Toledano M., Osorio R., Albaladejo A., Aguilera F.S., and Osorio E. Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus etch-and-rinse adhesives. Journal of Biomedical Materials Research A 77 (2006) 128-135
13. Sano H., Yoshikawa T., Pereira P.N., Kanemura N., Morigami M., Tagami J., and Pashley D.H. Long-term durability of dentin bonds made with a self-etching primer. Journal of Dental Research 78 (1999) 906-911
14. Reis A., Loguercio A.D., Carvalho R.M., and Grande R.H.M. Durability of resin dentin interfaces: effects of surface moisture and adhesive solvent component. Dental Materials 20 (2004) 669-676
15. Koshiro K., Inoue S., Tanaka T., Koase K., Fujita M., Hashimoto M., and Sano H. In vivo degradation of resin-dentin bonds produced by a self-etch vs. an etch-and-rinse adhesive system. European Journal of Oral Sciences 112 (2004) 368-375
16. Van Meerbeek B., Van Landuyt K., De Munck J., Hashimoto M., Peumans M., Lambrechts P., Yoshida Y., Inoue S., and Suzuki K. Technique-sensitivity of contemporary adhesives. Dental Materials Journal 24 (2005) 1-13
17. Hosaka K., Nakajima M., Yamauti M., Aksornmuang J., Ikeda M., Foxton R.M., Pashley D.H., and Tagami J. Effect of simulated pulpal pressure on all-in-one adhesive bond strengths to dentine. Journal of Dentistry 35 (2007) 207-213
18. Koibuchi H., Yasuda N., and Nakabayashi N. Bonding to dentin with a self-etching primer: the effect of smear layers. Dental Materials 17 (2001) 122-126
19. Shono Y., Ogawa T., Terashita M., Carvalho R.M., Pashley E.L., and Pashley D.H. Regional measurement of resin-dentin bonding as an array. Journal of Dental Research 78 (1999) 699-705
20. Toledano M., Osorio R., Ceballos L., Fuentes V., Fernández C.A.O., Tay F.R., and Carvalho R.M. Microtensile bond strength of several adhesive systems to different dentin depths. American Journal of Dentistry 16 (2003) 292-298
21. Osorio R., Erhardt M.C., Pimenta L.A., Osorio E., and Toledano M. EDTA treatment of dentin improves resin-dentin bonds durability. Journal of Dental Research 84 (2005) 736-740
22. Inai N., Kanemura N., Tagami J., Watanabe L.G., Marshall S.J., and Marshall G.W. Adhesion between collagen depleted dentin and dentin adhesives. American Journal of Dentistry 11 (1998) 123-127
23. De Munck J., Van Meerbeek B., Yoshida Y., Inoue S., Vargas M., Suzuki K., Lambrechts P., and Vanherle G. Four year water degradation of etch-and-rinse adhesives bonded to dentin. Journal of Dental Research 82 (2003) 136-140
24. Osorio R., Ceballos L., Tay F.R., Cabrerizo-Vilchez M.A., and Toledano M. Effect of sodium hypochlorite on dentin bonding with a polyalkenoic acid-containing adhesive system. Journal of Biomedical Materials Research 60 (2002) 316-324
25. Spencer P., Wang Y., Walker M.P., Wieliczka D.M., and Swafford J.R. Interfacial chemistry of the dentin/adhesive bond. Journal of Dental Research 79 (2000) 1458-1463
26. De Munck J., Shirai K., Yoshida Y., Inoue S., Van Landuyt K., Lambrechts P., Suzuki K., Shintani H., and Van Meerbeek B. Effect of water storage on the bonding effectiveness of 6 adhesives to Class I cavity dentin. Operative Dentistry 31 (2006) 456-465
27. Yoshida Y., Nagakane K., Fukuda R., Nakayama Y., Okazaki M., Shintani H., Inoue S., Tagawa Y., Suzuki K., De Munck J., and Van Meerbeek B. Comparative study on adhesive performance of functional monomers. Journal of Dental Research 83 (2004) 454-458
28. Inoue S., Koshiro K., Yoshida Y., De Munck J., Nagakane K., Suzuki K., and Sano H. Hydrolytic stability of self-etch adhesives bonded to dentin. Journal of Dental Research 84 (2005) 1160-1164
29. Fukegawa D., Hayakawa S., Yoshida Y., Suzuki K., Osaka A., and Van Meerbeek B. Chemical interaction of phosphoric acid ester with hydroxyapatite. Journal of Dental Research 85 (2006) 941-944
30. Tay F.R., and Pashley D.H. Aggressiveness of contemporary self-etching systems. I. Depth of penetration beyond dentin smear layers. Dental Materials 17 (2001) 296-308
31. Osorio R., Toledano M., de Leonardi G., and Tay F. Microleakage and interfacial morphology of self-etching adhesives in class V resin composite restorations. Journal of Biomedical Materials Research B Applied Biomaterials 66 (2003) 399-409
32. Reis A.F., Giannini M., Pereira P.N., and Long-term. TEM analysis of the nanoleakage patterns in resin-dentin interfaces produced by different bonding strategies. Dental Materials 23 (2007) 1164-1172
33. Inoue H., Inoue S., Uno S., Takahashi A., Koase K., and Sano H. Microtensile bond strength of two single-step adhesive systems to bur-prepared dentin. Journal of Adhesive Dentistry 3 (2001) 129-136
34. Carvalho R.M., Chersoni S., Frankenberger R., Pashley D.H., Prati C., and Tay F.R. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 26 (2005) 1035-1042
35. Moszner N., Salz U., and Zimmermann J. Chemical aspects of self-etching enamel-dentin adhesives: a systematic review. Dental Materials 21 (2005) 895-910
36. Gregóire G., and Millas A. Microscopic evaluation of dentin interface obtained with 10 contemporary self-etching systems: correlation with their pH. Operative Dentistry 30 (2005) 481-491
37. Tay F.R., Gwinnett J.A., and Wei S.H.Y. Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free, acetone-based, single-bottle primer/adhesives. Dental Materials 12 (1996) 236-244
38. Glavchev I., Nikolov R.N., and Valchev P. Determination of evaporation rates of mixed solvents with the formation of thin film for membranes. Polymer Testing 22 (2003) 529-532
39. Van Landuyt K., De Munck J., Snauwaert J., Coutinho E., Poitevin A., Yoshida Y., Inoue S., Peumans M., Suzuki K., Lambrechts P., and Van Meerbeek B. Monomer solvent phase separation in one-step self-etch adhesives. Journal of Dental Research 84 (2005) 183-188
40. Monticelli F., Osorio R., Pisani-Proenca J., and Toledano M. Resistance to degradation of resin-dentin bonds using a one-step HEMA-free adhesive. Journal of Dentistry 35 (2007) 181-186