Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives

Dental Materials

Volumn 24, Issue 4, 2008, Pages 492-501

  Cardoso, Marcio V ^a,b   Coutinho, Eduardo ^a   Ermis, R Banu ^a,c   Poitevin, André ^a   Van Landuyt, Kirsten ^a   De Munck, Jan ^a   Carvalho, Rubens C R ^b   Van Meerbeek, Bart ^a  

^a CATHOLIC UNIVERSITY OF LEUVEN   (Belgium)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

^c SULEYMAN DEMIREL UNIVERSITY   (Turkey)

Author keywords

Adhesion; Bond strength; Burs; Cavity preparation; Dental adhesive; Dentin; Lasers; Smear layer; Ultra sonoabrasion; Ultrastructure

Indexed keywords

ACIDITY; BOND STRENGTH (CHEMICAL); CHEMICAL VAPOR DEPOSITION; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS;

CAVITY PREPARATION; DENTAL ADHESIVES;

ADHESIVES;

RESIN CEMENT;

ARTICLE; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTIN; GAS; HISTOLOGY; HUMAN; METHODOLOGY; MOLAR TOOTH; SCANNING ELECTRON MICROSCOPY; SOLID STATE LASER; TENSILE STRENGTH; ULTRASOUND;

AIR ABRASION, DENTAL; DENTAL BONDING; DENTAL CAVITY PREPARATION; DENTAL STRESS ANALYSIS; DENTIN; GASES; HUMANS; LASERS, SOLID-STATE; MICROSCOPY, ELECTRON, SCANNING; MOLAR, THIRD; RESIN CEMENTS; TENSILE STRENGTH; ULTRASONICS;

EID: 38949184556     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2007.04.011     Document Type: Article

References (34)

1. Setien V.J., Cobb D.S., Denehy G.E., and Vargas M.A. Cavity preparation devices: effect on microleakage of Class V resin-based composite restorations. Am J Dent 14 (2001) 157-162
2. Tyas M.J., Anusavice K.J., and Frencken J.E. Minimal intervention dentistry-a review, FDI Commission Project 1-97. Int Dent J 50 (2000) 1-12
3. Pfender E., Han Q.Y., Or T.W., Lu Z.P., and Heberlein J. Rapid synthesis of diamond by counter-flow liquid injection into an atmospheric pressure plasma. Diamond Relat Mater 1 (1992) 127-133
4. Trava-Airoldi V.J., Corat E.J., Santos L.V., Diniz A.V., Moro J.R., and Leite N.F. Very adherent CVD diamond film on modified molybdenum surface. Diamond Relat Mater 11 (2002) 532-535
5. Ahmed W., Sein H., and Rajab H. Chemical vapor deposition of diamond coatings onto dental burs. J Chem Educ 80 (2003) 636
6. Sein H., Ahmed W., Rego C.A., Jones A.N., Amar M., Jackson M., et al. Chemical vapor deposition diamond coating on tungsten carbide dental cuttings tools. J Phys Condens Mater 15 (2003) S2961-S2967
7. Hugo B., and Stassinakis A. Preparation and restoration of small interproximal carious lesions with sonic instruments. Pract Periodont Aesthet Dent 10 (1998) 353-359
8. Matsumoto K., Hossain M., Hossain M.M., Kawano H., and Kimura Y. Clinical assessment of Er,Cr:YSGG laser application for cavity preparation. J Clin Laser Med Surg 20 (2002) 17-21
9. Harashima T., Kinoshita J., Kimura Y., Brugnera Jr. A., Zanin F., Pecora J.D., et al. Morphological comparative study on ablation of dental hard tissues at cavity preparation by Er:YAG and Er,Cr:YSGG lasers. Photomed Laser Surg 23 (2005) 52-55
10. Yazici A.R., Özgünaltay G., and Dayangaç B. A scanning electron microscopic study of different caries removal techniques on human dentin. Oper Dent 27 (2002) 360-366
11. Inoue H., Inoue S., Uno S., Takahashi A., Koase K., and Sano H. Microtensile bond strength of two single-step adhesive systems to bur-prepared dentin. J Adhes Dent 17 (2001) 122-126
12. Ogata M., Harada N., Yamagushi S., Nakajima M., Pereira P.N.R., and Tagami J. Effect of different burs on dentin bond strengths of self-etching primer bonding systems. Oper Dent 26 (2001) 375-382
13. Tay F.R., and Pashley D.H. Aggressiveness of contemporary self-etching systems. I: depth of penetration beyond dentin smears layers. Dent Mater 17 (2001) 296-308
14. Van Meerbeek B., De Munck J., Mattar D., Van Landuyt K., and Lambrechts P. Micro-tensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 28 (2003) 647-660
15. Phrukkanon S., Burrow M.F., and Tyas M.J. The effect of dentin location and tubule orientation on the bond strengths between resin and dentin. J Dent 27 (1999) 265-274
16. Perdigão J., Lambrechts P., Van Meerbeek B., Vanherle G., and Lopes A.L. Field emission SEM comparison of four postfixation drying techniques for human dentin. J Biomed Mater Res 29 (1995) 1111-1120
17. Peters M.C., and McLean M.E. Minimally invasive operative care II. Contemporary techniques and materials: an overview. J Adhes Dent 3 (2001) 17-31
18. Arcuri M.R., Schneider R.L., Strug R.A., and Clancy J.M. Scanning electron microscope analysis of tooth enamel treated with rotary instruments and abrasives. J Prosthet Dent 69 (1993) 483-490
19. Williams A.R., and Chater B.V. Mammalian platelet damage in vitro by an ultrasonic therapeutic device. Archs Oral Biol 25 (1980) 175-179
20. Payne Jr. J.H. Ultrasonic dissection. Surg Endosc 8 5 (1994) 416-418
21. Hossain M., Nakamura Y., Tamaki Y., Yamada Y., Murakami Y., and Matsumoto K. Atomic analysis and Knoop hardness measurement of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J Oral Rehabil 30 (2003) 515-521
22. Rizoiu I., Kohanghadosh F., Kimmel A.I., and Eversole L.R. Pulpal thermal responses to an erbium, chromium: YSGG pulsed laser hydrokinetic system. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 86 (1998) 220-223
23. Hossain M., Nakamura Y., Yamada Y., Kimura Y., Nakamura G., and Matsumoto K. Ablation depths and morphological changes in human enamel and dentin after Er:YAG laser irradiation with or without water mist. J Clin Laser Med Surg 17 (1999) 105-109
24. Chimello-Sousa D.T., Souza A.E., Chinelatti M.A., Pécora J.D., Palma-Dibb R.G., and Corona S.A.M. Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel. J Dent 34 (2006) 245-251
25. Jung M., Wehlen L.O., and Klimek J. Surface roughness and bond strength of enamel to composite. Dent Mater 15 (1999) 250-256
26. Oliveira S.S.A., Pugach M.K., Hilton J.F., Watanabe L.G., Marshall S.J., and Marshall Jr. G.W. The influence of dentin smear layer on adhesion: a self-etching primer vs. a total-etch system. Dent Mater 19 (2003) 758-767
27. Koibuchi H., Yasuda N., and Nakabayashi N. Bonding to dentin with a self-etching primer: the effect of smear layers. Dent Mater 17 (2001) 122-126
28. De Munck J., Van Meerbeek B., Yudhira R., Lambrechts P., and Vanherle G. Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci 110 (2002) 322-329
29. Borges C.F.M., Magne P., Pfender E., and Heberlein J. Dental diamond burs made with a new technology. J Prosthet Dent 82 (1999) 73-79
30. Ceballos L., Toledano M., Osorio R., Tay F.R., and Marshall G.W. Bonding to Er-YAG-laser-treated dentin. J Dent Res 81 (2002) 119-122
31. Bachmann L., Diebolder R., Hibst R., and Zezell D.M. Changes in chemical composition and collagen structure of dentin tissue after erbium laser irradiation. Spectrochim Acta A Mol Biomol Spectrosc 61 (2005) 2634-2639
32. Kataumi M., Nakajima M., Yamada T., and Tagami J. Tensile bond strength and SEM evaluation of Er:YAG laser irradiated dentin using dentin adhesive. Dent Mater J 17 (1998) 125-138
33. Perdigão J., Frankenberger R., Rosa B.T., and Breschi L. New trends in dentin/enamel adhesion. Am J Dent 13 (2000) 25D-30D
34. De Munck J., Vargas M., Iracki J., Van Landuyt K., Poitevin A., Lambrechts P., et al. One-day bonding effectiveness of new self-etch adhesives to bur-cut enamel and dentin. Oper Dent 30 (2005) 39-49